Custom Field Not Getting Picked Up in BOR Event

We added a custom field, ZZMDMID, to the LFA1 table. We have Event Linkage set up to call a PI proxy whenever the LFA1.CREATED event is raised. Our event linkage shows that ZZMDMID exists and we have it mapped to the proxy interface.
Problem is that the new field, even though populated in LFA1 table, is never getting sent out to the proxy. Is there something else I need to configure?
Thanks,
Keith

requirements changed...not needed anymore

Similar Messages

CUSTOM library not getting picked up

We have our custom business code written in HR_ADMIN.pll and it will be called through CUSTOM.pll for few forms ( like people, Assignment, Element Entry forms)
In Our CLONE instance after every weekend outage for backup, we get error opening people form because of HR_ADMIN.pll not getting picked up. we used to bounce forms port, everything would then work. but since last week bouncing forms port also not working.
I took frd trace, error is exactly at calling hr_admin package. Did anybody got the same error before and have any solution to this ?
Error we get is:
FRM-40735: WHEN-CREATE-RECORD trigger raised unhandled exception ORA-06508.
ORA-01403: no data found
Message was edited by:
user552453

check whether task name is same as session/workflow name. also check any spaces in name. if dac didn't fin corresponding session/workflow it may not create paramater file. if other custom tasks are working from dac this should also work.
Thanks
Jay.

Custom fields not getting updated in Mass Maintenance-MM17

Hi,
I have created a custom field in MARC table and the data is getting updated to the MARC table through MM01/MM02 but it is not getting updated by MM17. I have checked the notes 44410, 576160, 414020 and 116311. I have done the following changes as per the sap notes.
1. Created a custom segment ZE1MARCM by copying the standard segment E1MARCM and added the custom field in that
    segment.
2. I have extended the IDOC 'MATMAS03' and added the custom segment ZE1MARCM to E1MARAM.
3. Created a new entry in we82 and provided the extension type 'ZMATMAS03' and release '701'.
4. Adjusted the partner profile in we20 for matmas with port and providing the extension idoc type.
5. Added the custom field in the table MASSFLDLST.
6. Implemented the code in BADI 'MG_MASS_NEWSEG' and exits 'EXIT_SAPLMV01_002' , 'EXIT_SAPLMV02_002' as per the
    sap notes.
The custom field is not getting updated through mass maintenance. Please let me know if i have missed anything?
Thanks,
Geeta

I had this same question several years ago. Please check my answer at Initialize MARC Custom Fields Using MM17 Does Not Work

Custom field not getting populated in the "Show Results where" drop down

Hi all,
In appointment detail page by clicking on Add button on the user related information section , it takes us to a search layout showing the list of available users.
Here we have to filter the user's based on a custom field which has already been created in the user object. But I am not able to add the custom field in the "Show results where" drop down for which the search has to be done.
It is getting reflected in the normal search layouts.So Can any one tell me why the change is not getting reflected in the user related info search layout?

I tested your use case and you are correct. I would recommend that you submit a service request to CRM On Demand customer care in reference to this issue.

PO Custom Field not getting filled from Shopping Cart

Hi Gurus,
I am new to SRM. The requirement I had was to add a new field to the SC. I read several posts and articles on this but couldn't find the solution to it. I managed to do this modifying the corresponding structures in SRM and making the necessary changes in R/3 so the new filed can be seen in ME21/22/23N.
I checked Andreas Milbredt document to achieve it as mentioned:
Document: How to transfer custom fields from SRM to Backend.
http://www.sdn.sap.com/irj/sdn/index?rid=/library/uuid/20b36c12-685f-2c10-4fb4-ba2e0b969c27
After that, when I create a Shopping Cart, the value in the New field is not transferred to the Back end.
I coded the following BADIs and User Exits:
In SRM:
BBP_CUF_BADI_2 (MODIFY_SCREEN) ->To enable or disable the field depending on conditions. Works fine.
BBP_DOC_CHECK_BADI (BBP_DOC_CHECK) -> To do some checks. Works Fine
BBP_CREATE_BE_PO_NEW (FILL_PO_INTERFACE1) ->Here I fill structures BAPI_TE_MEPOITEM and BAPI_TE_MEPOITEMX. I added another u2018Xu2019 to indicate the new field to BAPI_TE_MEPOITEMX. But I think I am not doing it right. This structure BAPI_TE_MEPOITEM/X, does the order of the fields correspond to the order of the fields in any of these 3 structures (which I am using)?
INCL_EEW_PD_HISTORY_CSF
INCL_EEW_PD_ITEM_CSF
INCL_EEW_PD_ITEM_CSF_SC
I also checked the following link:
Map a custom SRM field to a standard field in R/3
In R/3 I populated the Exits Andreau2019s mentions on his article. Am I missing anything else?
Thanks & Regards,
Ernesto.

Hi Ernesto,
You can find out how your BAPI structure is being populated (by generating the test data ) using FBGENDAT program and activating the BAPI_PO_CREATE1 (and you will need to set the parameter for the specified user id)... This will provide you ability to execute the BAPI offline and figure out what is happening...
Note 517767 - Generate test data for function modules
Things to look for, Is any of your custom fields quantity fields or integer?
Check out the following OSS note
Note 509898 - BAPI enhancement concept and Unicode
Also check out the following SDN Thread,
problem using BAPI_BUS2001_CREATE to create project definition
Check out a similar thread that we are discussing (for PR)
Custom Fileds Data Was Not Getting Updated In BAPI_PR_CREATE

Customer Fields not getting poplulated in PO in R/3 (ECC 6.0) from SRM 5.0

Hi,
    We Recently upgraded our R/3 System from 4.6 C to ECC 6.0.
Shopping card number is getting created in SRM side and after approval it is getting sent to R/3 Back end,We have some customer fields that need to be populated in the back end from the shopping card,Which is not happening as of now.We are using the BAPI_PO_CREATE1 for creating the PO in R/3.We tried running the BAPI_PO_CREATE1 Standalone by giving the customer fields Table EXTENSIONIN and in Structure BAPI_TE_PO_ITEMS,But the custom fields are not populating in the PO.
Pls suggest,
Thanks
Rakesh.

Hi Rakesh ,
1.wat is ur target table that ur custom fields were added using apped structure.
2. Have u passed the Communcation strucure also means
in ur case BAPI_TE_MEPOITEMX along with BAPI_TE_MEPOITEM .
Plz find similar code which is for sale order coding which may help u .
***Constant Declarations
Constant: C_BAPE_VBAP (9) type u2018BAPE_VBAPu2019,
          C_BAPE_VBAPX (10) type u2018BAPE_VBAPXu2019
TYPES:    BEGIN OF T_BAPE_VBAP,
           VBELN TYPE VBELN_VA,
           POSNR TYPE POSNR_VA,
           ZZcontract_num type ZZcontract_num "Custom field
          END OF T_BAPE_VBAP.
***Communication Fields
TYPES: BEGIN OF T_BAPE_VBAPX,
        VBELN TYPE VBELN_VA,
        POSNR TYPE POSNR_VA,
        ZZcontract_numX type CHAR1,
       END OF T_BAPE_VBAPX.
Declaring the Internal table and Work areas
DATA: I_EXTENSIONIN TYPE STANDARD TABLE OF BAPIPAREX. u201CInternal table                             for BAPI Extension Table
      w_EXTENSIONIN like line of I_EXTENSIONIN,             u201CWork area for BapiExtension Table
     I_return type standard table of bapiret2,
   W_return like line of i_return,
      is_BAPE_VBAP    type    T_BAPE_VBAP,              u201CStructure declaration
      is_BAPE_VBAPX type T_BAPE_VBAPX,            u201CStructure declaration
      v_vbeln type   BAPE_VBAP-VBELN,            u201CVariable for the doc no
      v_posnr type BAPE_VBAP-POSNR,                  u201CVariable for the itemnumber
v_zzcontract_num type BAPE_VBAP-ZZcontract_num, u201CVariable for the Contract number
Filling the BAPI table Extension Structure.
           W_BAPE_VBAP-VBELN =u201D00001234u2019.
           W_BAPE_VBAP-POSNR =u2019000010u2019 .
           W_BAPE_VBAP-ZZcontract = 'ABC123'.
W_EXTENSIONIN-STRUCTURE = C_BAPE_VBAP.
w_EXTENSIONIN+30 =W_BAPE_VBAP.
APPEND W_EXTENSIONIN TO I_EXTENSIONIN.
CLEAR w_EXTENSIONIN..
           k_BAPE_VBAP-VBELN =u201D00001234u2019.
           W_BAPE_VBAP-POSNR =u2019000010u2019 .
W_BAPE_VBAP-ZZcontractx = 'X'.
*********same to pass Communication Structure.
W_EXTENSIONIN-STRUCTURE = C_BAPE_VBAPX.
w_EXTENSIONIN+30 = W_BAPE_VBAPX.
APPEND W_EXTENSIONIN TO I_EXTENSIONIN.
CLEAR w_EXTENSIONIN.
6) Then Call BAPI u2018BAPI_SALESORDER_CHANGE u2018to Update Sale Order with Contract number
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
    EXPORTING
      SALESDOCUMENT    = V_SALORD_NUMBER
      ORDER_HEADER_IN = K_ORDER_HEADER_IN
      ORDER_HEADER_INX = K_ORDER_HEADER_INX
    TABLES
      RETURN           = I_RETURN
      ORDER_ITEM_IN    = I_ORDER_ITEM_IN
      ORDER_ITEM_INX   = I_ORDER_ITEM_INX
      EXTENSIONIN      = I_EXTENSIONIN.
****COMMIT WORK AND WAIT.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      WAIT = 'X'.
Hope it may help you
Rgds
Sree

Custom field not getting added into MSEG table throuhBADI MB_MIGO_BADI

i have created a new tab in MIGO transaction and created a zfield called ZZcert . i have also created one append structure in MSEG table with field name ZZCERT .
i have created new tab for migo using BADI MB_MIGO_BADI . when i enter value in ZZCERT in MIGO transaction , it is not updated in MSEG table . but in debugging mode im able to see the value in (SAPLMIGO)MSEG . i have tried the option of using Field symbols also . but it didnt work .
I have searched in the forum for suitable answers.
can anybody guide me how to update the ZZCERT value into MSEG table ??
thanks in advance
pavan

Hi,
if i am not wrong these are standard transactions..when you have created a screen then for your field you can click on "get from dictionary" and the map your field(drag a field from MSEG directly on to the custom field on screen) and the you have to activate the screen....i think thats the only thing you need to do so as to update the field value in database...
or else as sugegsted by the post above you need to use BDC recording to update the databse table MSEG.
Abhijeet.

Custom field not getting displayed in SUS PO item level

HI all,
We are using SRM 5.0, ECC6.0 and ECS scenario.
As per SAP note 762984, we have enhanced the structures such as :
INCL_EEW_PD_ITEM_CSF_SUSPO
INCL_EEW_PD_ITEM_CSF
and have added a record in the following place in SPRO:
Supplier Relationship management-> Supplier self service->Make field control settings for tables.
| Item | Display | Z.PO.ITM.VIEW
| Item | Change | Z.PO.ITM.EDIT
But we are unable to display the field in the SUS screen.
We had also referred to the following blog :
/people/yeusheng.teo/blog/2008/01/05/ordering-unit-vs-order-pricing-unit-in-srm-sus
but had no success.
Please let us know if we did something wrong or are we missing something.
Also please let us know if BSP changes are really necessary to do this as neither in the SAP note nor in the above mentioned blog, there is any mention about this.
Regards
Kishan

Hi Bharadwaj,
Thank you for your inputs. I executed the program but it didn't display the field.
But I was able to rectify it by re-creating the steps mentioned in the blog (see original post). I had missed giving correct positions to the custom field.
Regards
Kishan

Contract item customer fields not getting saved from ITS side??

Hi there,
I have had to add "account assignment" details to a contract item (3 fields: account assignment, G/L account and cost center)...
All is going fine....in fact the 3 fields have been added on the contract item level in function group BBP_CTR_UI_ITS screen 4100. I followed the instructions in SAP note number 458591 "user defined fields: preparation and use"...
The 3 fields I added where "generated" down to SAP table level and now appear in table BBP_PDIGP...
Also when I create a contract from transaction BBP_CTR_MAIN and fill my 3 new fields in on the item level all works fine when I release the contract...the contract item gets created and the 3 new fields appear nicely in table BBP_PDIGP....so from the GUI side all is PERFECT...
I have worked on the ITS side of things quite a bit but now I clearly don't understand something...
I go to "internet service" BBP_CTR_MAIN - template SAPLBBP_CTR_UI_ITS 4100.....I have added my code and my 3 fields display perfectly on the web page....for each contract item.....
As I said I can make the contract with the 3 new fields filled perfectly via the GUI (transaction BBP_CTR_MAIN)....and if I VIEW that contract on the web it also displays perfect with the 3 filled in fields....
If I COPY that contract.....and save the new one, the 3 fields are still fine, all saved.
NOW COMES THE PROBLEM:-)
If I create a new contract from the web, fill in my 3 fields on the contract item level THE 3 FIELD VALUES SEEM TO NOT GET POSTED BACK AND SAVED IN THE SRM DATABASE...
I have tried everything from using FIELD-GET, FIELD-SET...the note I mentioned above mentions some BADI's that I could possibly use:
BBP_CUF_BADI_2 (modify screen methods etc)
BBP_DOC_SAVE_BADI
All I really want to try understand is how interaction between the user clicking on the web page and the SAP GUI screen flow is really happening.....I mean I see in function group BBP_CTR_UI_ITS there are a number of function modules with ITS in them, are those function modules just called when the user is clicking on the web (via ITS etc) - I would assume so...
Bottomline is I need what is happening in the SAP GUI to happen on the web as well.....it is almost there, I just need a push in the right direction so that I can grab the fields from the web page, in the most standard way possible.
Thanks for the help, I am very curious to see how this sort of solved.
Regards
Lynton

He Yann,
We are running SRM 3.0, EBP 4.0 - support pack 8
Thanks for the help
Lynton

Force index not getting picked up while running the SQL Query

Hi All,
We are facing an issue with one SQL Query. We have created a custom Index and we are using that index in our query by using the following syntax:
/*+INDEX(ol XXEXH_ORDER_LINES_N2)*/
Where
ol – Table Alias Name
XXEXH_ORDER_LINES_N2 – Index Name
But still the index is not getting picked up in the Explain Plan.
If any one of you have faced a similar issue then please let us know how you had resolved it.
Appreciate your help.
DB version:10.2.0.4
Apps version: 11.5.10.2.0
Thanks.

The query and plan are given as:
SELECT
/*+INDEX(ol XXEXH_ORDER_LINES_N2)*/
ol.header_id,
ol.line_id,
ol.line_type_id,
ol.flow_status_code,
ol.last_update_date,
ol.inventory_item_id,
ol.ship_from_org_id,
oh.order_number,
ttv.NAME,
msib.segment1,
msib.item_type,
fl.segment1 || '-' || fl.segment2 || '-' || fl.segment3 || '-' || fl.segment4 current_loc,
ship_to.country
|| '-'
|| NVL (ship_to.state, ship_to.province)
|| '-'
|| DECODE (ship_to.county,
NULL, ship_to.city,
ship_to.county
|| DECODE (ship_to.country,
NULL, NULL,
'-' || ship_to.city
) new_loc,
mmt.transaction_type_id,
mtt.transaction_type_name,
DECODE (mil.segment1,
UPPER ('Field%'), 'PLEASE VALIDATE FIELD LOCATION',
hou.country
|| '-'
|| DECODE (mil.segment1,
UPPER ('Field%'), NULL,
hou.region_2
|| '-'
|| DECODE (mil.segment1,
UPPER ('Field%'), NULL,
hou.region_1
|| '-'
|| DECODE (mil.segment1,
UPPER ('Field%'), NULL,
hou.town_or_city
) rma_loc,
ship_su.attribute1 oper_loc,
msib.organization_id --SC#5878
,fa.asset_number --SC#5878
,fdh.code_combination_id --SC#5878
,fa.asset_id parent_asset_id
FROM fnd_flex_values_vl ffvv,
fnd_flex_value_sets ffvs,
mtl_item_locations mil,
--hr_organization_units_v hou,
hr_organization_units o,
-- hr_lookups l,
-- hr_lookups l2,
hr_locations hou,
hr_locations_all_tl lot,
mtl_transaction_types mtt,
mtl_material_transactions mmt,
hz_locations ship_to,
hz_cust_acct_sites ship_cas,
hz_cust_site_uses ship_su,
hz_party_sites ship_ps,
fa_distribution_history fdh,
fa_locations fl,
fa_additions fa,
mtl_system_items_b msib,
oe_transaction_types_tl ttv,
oe_order_headers oh,
oe_order_lines ol
WHERE ol.org_id = TO_NUMBER (fnd_profile.VALUE ('ORG_ID')) --SC#5878
AND ol.flow_status_code = 'CLOSED'
AND TRUNC(ol.last_update_date) BETWEEN '01-SEP-2010' AND '31-OCT-2010'
AND ol.header_id = oh.header_id
AND ol.line_type_id = ttv.transaction_type_id
AND ol.inventory_item_id = msib.inventory_item_id
AND ol.ship_from_org_id = msib.organization_id
AND msib.item_type = 'REN'
AND SUBSTR(fa.asset_number,1,DECODE(INSTR(fa.asset_number,'-'),0,LENGTH(fa.asset_number),INSTR(fa.asset_number,'-')-1)) = msib.segment1 -- SC#11824 / added for fetching all assets with any suffix/ on 20-JUL-2011 by MPRAKAS
AND fdh.asset_id(+) = fa.asset_id
AND fdh.location_id = fl.location_id(+)
AND fdh.date_ineffective IS NULL
AND ol.ship_to_org_id = ship_su.site_use_id
AND ship_su.cust_acct_site_id = ship_cas.cust_acct_site_id
AND ship_cas.party_site_id = ship_ps.party_site_id
AND ship_ps.location_id = ship_to.location_id
AND mmt.inventory_item_id = ol.inventory_item_id --added new condition
AND mmt.organization_id = ol.ship_from_org_id --added new condition
AND mmt.trx_source_line_id = ol.line_id
AND mmt.transaction_quantity > 0
AND mmt.transaction_type_id = mtt.transaction_type_id(+)
AND mtt.transaction_type_name(+) = 'RMA Receipt'
AND o.organization_id(+) = mmt.organization_id
AND mil.inventory_location_id(+) = mmt.locator_id
AND ffvs.flex_value_set_name = 'HCCA_AFF_LOCATION' --added new condition
AND ffvv.flex_value_set_id = ffvs.flex_value_set_id(+)
AND ffvv.flex_value(+) = ship_su.attribute1
AND ttv.LANGUAGE = 'US'
AND (ol.ordered_item_id IS NULL OR ol.ordered_item_id > 0)
AND NVL (ol.ship_to_org_id, 1) > 0
AND NVL (hou.location_id, 1) > 0
AND o.location_id = hou.location_id(+)
AND NVL (hou.business_group_id, NVL (hr_general.get_business_group_id, -99)) = NVL (hr_general.get_business_group_id, -99)
AND hou.location_id = lot.location_id
AND lot.LANGUAGE = USERENV ('LANG')
AND (fa.asset_id = fa.parent_asset_id OR fa.parent_asset_id IS NULL)
Plan
SELECT STATEMENT ALL_ROWSCost: 4,065 Bytes: 958 Cardinality: 2
     125 CONCATENATION
          62 NESTED LOOPS OUTER Cost: 3,140 Bytes: 479 Cardinality: 1
               59 FILTER
                    58 NESTED LOOPS OUTER Cost: 3,139 Bytes: 441 Cardinality: 1
                         55 NESTED LOOPS Cost: 3,131 Bytes: 420 Cardinality: 1
                              52 NESTED LOOPS OUTER Cost: 3,130 Bytes: 390 Cardinality: 1
                                   49 NESTED LOOPS OUTER Cost: 3,128 Bytes: 377 Cardinality: 1
                                        46 NESTED LOOPS Cost: 3,127 Bytes: 351 Cardinality: 1
                                             44 HASH JOIN Cost: 3,126 Bytes: 342 Cardinality: 1
                                                  42 NESTED LOOPS Cost: 2,443 Bytes: 324 Cardinality: 1
                                                       40 NESTED LOOPS Cost: 2,443 Bytes: 315 Cardinality: 1
                                                            38 NESTED LOOPS Cost: 2,443 Bytes: 306 Cardinality: 1
                                                                 36 NESTED LOOPS Cost: 2,443 Bytes: 298 Cardinality: 1
                                                                      33 NESTED LOOPS Cost: 2,442 Bytes: 268 Cardinality: 1
                                                                           31 NESTED LOOPS Cost: 2,441 Bytes: 259 Cardinality: 1
                                                                                28 NESTED LOOPS Cost: 2,438 Bytes: 238 Cardinality: 1
                                                                                     25 NESTED LOOPS Cost: 2,437 Bytes: 207 Cardinality: 1
                                                                                          22 NESTED LOOPS Cost: 2,436 Bytes: 194 Cardinality: 1
                                                                                               19 NESTED LOOPS Cost: 2,435 Bytes: 184 Cardinality: 1
                                                                                                    16 NESTED LOOPS Cost: 2,433 Bytes: 168 Cardinality: 1
                                                                                                         13 NESTED LOOPS Cost: 2,432 Bytes: 154 Cardinality: 1
                                                                                                              10 NESTED LOOPS Cost: 2,430 Bytes: 126 Cardinality: 1
                                                                                                                   7 NESTED LOOPS Cost: 2,427 Bytes: 102 Cardinality: 1
                                                                                                                        4 NESTED LOOPS Cost: 779 Bytes: 34,028 Cardinality: 724
                                                                                                                             2 TABLE ACCESS BY INDEX ROWID TABLE APPLSYS.FND_FLEX_VALUE_SETS Cost: 2 Bytes: 28 Cardinality: 1
                                                                                                                                  1 INDEX UNIQUE SCAN INDEX (UNIQUE) APPLSYS.FND_FLEX_VALUE_SETS_U2 Cost: 1 Cardinality: 1
                                                                                                                             3 TABLE ACCESS FULL TABLE AR.HZ_CUST_SITE_USES_ALL Cost: 777 Bytes: 13,756 Cardinality: 724
                                                                                                                        6 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_ORDER_LINES_ALL Cost: 3 Bytes: 55 Cardinality: 1
                                                                                                                             5 INDEX RANGE SCAN INDEX ONT.OE_ORDER_LINES_N2 Cost: 2 Cardinality: 1
                                                                                                                   9 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_MATERIAL_TRANSACTIONS Cost: 3 Bytes: 24 Cardinality: 1
                                                                                                                        8 INDEX RANGE SCAN INDEX INV.MTL_MATERIAL_TRANSACTIONS_N1 Cost: 2 Cardinality: 1
                                                                                                              12 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_SYSTEM_ITEMS_B Cost: 2 Bytes: 28 Cardinality: 1
                                                                                                                   11 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_B_U1 Cost: 1 Cardinality: 1
                                                                                                         15 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_CUST_ACCT_SITES_ALL Cost: 1 Bytes: 14 Cardinality: 1
                                                                                                              14 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_CUST_ACCT_SITES_U1 Cost: 0 Cardinality: 1
                                                                                                    18 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_ORDER_HEADERS_ALL Cost: 2 Bytes: 16 Cardinality: 1
                                                                                                         17 INDEX UNIQUE SCAN INDEX (UNIQUE) ONT.OE_ORDER_HEADERS_U1 Cost: 1 Cardinality: 1
                                                                                               21 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_PARTY_SITES Cost: 1 Bytes: 10 Cardinality: 1
                                                                                                    20 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_PARTY_SITES_U1 Cost: 0 Cardinality: 1
                                                                                          24 TABLE ACCESS BY INDEX ROWID TABLE HR.HR_ALL_ORGANIZATION_UNITS Cost: 1 Bytes: 13 Cardinality: 1
                                                                                               23 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_ORGANIZATION_UNITS_PK Cost: 0 Cardinality: 1
                                                                                     27 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_TRANSACTION_TYPES_TL Cost: 1 Bytes: 31 Cardinality: 1
                                                                                          26 INDEX UNIQUE SCAN INDEX (UNIQUE) ONT.OE_TRANSACTION_TYPES_TL_U1 Cost: 0 Cardinality: 1
                                                                                30 TABLE ACCESS BY INDEX ROWID TABLE APPLSYS.FND_FLEX_VALUES Cost: 3 Bytes: 21 Cardinality: 1
                                                                                     29 INDEX RANGE SCAN INDEX APPLSYS.FND_FLEX_VALUES_N1 Cost: 2 Cardinality: 1
                                                                           32 INDEX UNIQUE SCAN INDEX (UNIQUE) APPLSYS.FND_FLEX_VALUES_TL_U1 Cost: 1 Bytes: 9 Cardinality: 1
                                                                      35 TABLE ACCESS BY INDEX ROWID TABLE HR.HR_LOCATIONS_ALL Cost: 1 Bytes: 30 Cardinality: 1
                                                                           34 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_LOCATIONS_PK Cost: 0 Cardinality: 1
                                                                 37 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_ALL_ORGANIZATION_UNTS_TL_PK Cost: 0 Bytes: 8 Cardinality: 1
                                                            39 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_LOCATIONS_ALL_TL_PK Cost: 0 Bytes: 9 Cardinality: 1
                                                       41 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_LOCATIONS_ALL_TL_PK Cost: 0 Bytes: 9 Cardinality: 1
                                                  43 TABLE ACCESS FULL TABLE FA.FA_ADDITIONS_B Cost: 683 Bytes: 670,734 Cardinality: 37,263
                                             45 INDEX UNIQUE SCAN INDEX (UNIQUE) FA.FA_ADDITIONS_TL_U1 Cost: 1 Bytes: 9 Cardinality: 1
                                        48 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_TRANSACTION_TYPES Cost: 1 Bytes: 26 Cardinality: 1
                                             47 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_TRANSACTION_TYPES_U1 Cost: 0 Cardinality: 1
                                   51 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_ITEM_LOCATIONS Cost: 2 Bytes: 13 Cardinality: 1
                                        50 INDEX RANGE SCAN INDEX (UNIQUE) INV.MTL_ITEM_LOCATIONS_U1 Cost: 1 Cardinality: 1
                              54 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_LOCATIONS Cost: 1 Bytes: 30 Cardinality: 1
                                   53 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_LOCATIONS_U1 Cost: 0 Cardinality: 1
                         57 TABLE ACCESS BY INDEX ROWID TABLE FA.FA_DISTRIBUTION_HISTORY Cost: 8 Bytes: 126 Cardinality: 6
                              56 INDEX RANGE SCAN INDEX FA.FA_DISTRIBUTION_HISTORY_N2 Cost: 2 Cardinality: 6
               61 TABLE ACCESS BY INDEX ROWID TABLE FA.FA_LOCATIONS Cost: 1 Bytes: 38 Cardinality: 1
                    60 INDEX UNIQUE SCAN INDEX (UNIQUE) FA.FA_LOCATIONS_U1 Cost: 0 Cardinality: 1
          124 NESTED LOOPS OUTER Cost: 925 Bytes: 479 Cardinality: 1
               121 FILTER
                    120 NESTED LOOPS OUTER Cost: 924 Bytes: 441 Cardinality: 1
                         117 NESTED LOOPS Cost: 916 Bytes: 420 Cardinality: 1
                              115 HASH JOIN Cost: 915 Bytes: 411 Cardinality: 1
                                   113 NESTED LOOPS OUTER Cost: 231 Bytes: 393 Cardinality: 1
                                        110 NESTED LOOPS OUTER Cost: 229 Bytes: 380 Cardinality: 1
                                             107 NESTED LOOPS Cost: 228 Bytes: 354 Cardinality: 1
                                                  104 NESTED LOOPS Cost: 225 Bytes: 330 Cardinality: 1
                                                       102 NESTED LOOPS Cost: 224 Bytes: 321 Cardinality: 1
                                                            99 NESTED LOOPS Cost: 222 Bytes: 293 Cardinality: 1
                                                                 96 NESTED LOOPS Cost: 221 Bytes: 263 Cardinality: 1
                                                                      93 NESTED LOOPS Cost: 220 Bytes: 253 Cardinality: 1
                                                                           90 NESTED LOOPS Cost: 218 Bytes: 237 Cardinality: 1
                                                                                87 NESTED LOOPS Cost: 217 Bytes: 223 Cardinality: 1
                                                                                     84 NESTED LOOPS Cost: 216 Bytes: 192 Cardinality: 1
                                                                                          81 NESTED LOOPS Cost: 210 Bytes: 137 Cardinality: 1
                                                                                               78 NESTED LOOPS Cost: 28 Bytes: 118 Cardinality: 1
                                                                                                    75 NESTED LOOPS Cost: 22 Bytes: 97 Cardinality: 1
                                                                                                         73 NESTED LOOPS Cost: 22 Bytes: 88 Cardinality: 1
                                                                                                              71 NESTED LOOPS Cost: 22 Bytes: 79 Cardinality: 1
                                                                                                                   69 NESTED LOOPS Cost: 22 Bytes: 71 Cardinality: 1
                                                                                                                        66 NESTED LOOPS Cost: 19 Bytes: 58 Cardinality: 1
                                                                                                                             64 TABLE ACCESS BY INDEX ROWID TABLE APPLSYS.FND_FLEX_VALUE_SETS Cost: 2 Bytes: 28 Cardinality: 1
                                                                                                                                  63 INDEX UNIQUE SCAN INDEX (UNIQUE) APPLSYS.FND_FLEX_VALUE_SETS_U2 Cost: 1 Cardinality: 1
                                                                                                                             65 TABLE ACCESS FULL TABLE HR.HR_LOCATIONS_ALL Cost: 17 Bytes: 30 Cardinality: 1
                                                                                                                        68 TABLE ACCESS BY INDEX ROWID TABLE HR.HR_ALL_ORGANIZATION_UNITS Cost: 3 Bytes: 13 Cardinality: 1
                                                                                                                             67 INDEX RANGE SCAN INDEX HR.HR_ORGANIZATION_UNITS_FK3 Cost: 1 Cardinality: 5
                                                                                                                   70 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_ALL_ORGANIZATION_UNTS_TL_PK Cost: 0 Bytes: 8 Cardinality: 1
                                                                                                              72 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_LOCATIONS_ALL_TL_PK Cost: 0 Bytes: 9 Cardinality: 1
                                                                                                         74 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_LOCATIONS_ALL_TL_PK Cost: 0 Bytes: 9 Cardinality: 1
                                                                                                    77 TABLE ACCESS BY INDEX ROWID TABLE APPLSYS.FND_FLEX_VALUES Cost: 6 Bytes: 2,667 Cardinality: 127
                                                                                                         76 INDEX RANGE SCAN INDEX APPLSYS.FND_FLEX_VALUES_N2 Cost: 2 Cardinality: 127
                                                                                               80 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_CUST_SITE_USES_ALL Cost: 182 Bytes: 19 Cardinality: 1
                                                                                                    79 INDEX RANGE SCAN INDEX APPS.HCCA_HZ_CUST_SITE_USES_ALL_N1 Cost: 1 Cardinality: 489
                                                                                          83 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_ORDER_LINES_ALL Cost: 6 Bytes: 55 Cardinality: 1
                                                                                               82 INDEX RANGE SCAN INDEX ONT.OE_ORDER_LINES_N2 Cost: 2 Cardinality: 4
                                                                                     86 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_TRANSACTION_TYPES_TL Cost: 1 Bytes: 31 Cardinality: 1
                                                                                          85 INDEX UNIQUE SCAN INDEX (UNIQUE) ONT.OE_TRANSACTION_TYPES_TL_U1 Cost: 0 Cardinality: 1
                                                                                89 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_CUST_ACCT_SITES_ALL Cost: 1 Bytes: 14 Cardinality: 1
                                                                                     88 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_CUST_ACCT_SITES_U1 Cost: 0 Cardinality: 1
                                                                           92 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_ORDER_HEADERS_ALL Cost: 2 Bytes: 16 Cardinality: 1
                                                                                91 INDEX UNIQUE SCAN INDEX (UNIQUE) ONT.OE_ORDER_HEADERS_U1 Cost: 1 Cardinality: 1
                                                                      95 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_PARTY_SITES Cost: 1 Bytes: 10 Cardinality: 1
                                                                           94 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_PARTY_SITES_U1 Cost: 0 Cardinality: 1
                                                                 98 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_LOCATIONS Cost: 1 Bytes: 30 Cardinality: 1
                                                                      97 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_LOCATIONS_U1 Cost: 0 Cardinality: 1
                                                            101 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_SYSTEM_ITEMS_B Cost: 2 Bytes: 28 Cardinality: 1
                                                                 100 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_B_U1 Cost: 1 Cardinality: 1
                                                       103 INDEX UNIQUE SCAN INDEX (UNIQUE) APPLSYS.FND_FLEX_VALUES_TL_U1 Cost: 1 Bytes: 9 Cardinality: 1
                                                  106 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_MATERIAL_TRANSACTIONS Cost: 3 Bytes: 24 Cardinality: 1
                                                       105 INDEX RANGE SCAN INDEX INV.MTL_MATERIAL_TRANSACTIONS_N1 Cost: 2 Cardinality: 1
                                             109 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_TRANSACTION_TYPES Cost: 1 Bytes: 26 Cardinality: 1
                                                  108 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_TRANSACTION_TYPES_U1 Cost: 0 Cardinality: 1
                                        112 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_ITEM_LOCATIONS Cost: 2 Bytes: 13 Cardinality: 1
                                             111 INDEX RANGE SCAN INDEX (UNIQUE) INV.MTL_ITEM_LOCATIONS_U1 Cost: 1 Cardinality: 1
                                   114 TABLE ACCESS FULL TABLE FA.FA_ADDITIONS_B Cost: 683 Bytes: 670,734 Cardinality: 37,263
                              116 INDEX UNIQUE SCAN INDEX (UNIQUE) FA.FA_ADDITIONS_TL_U1 Cost: 1 Bytes: 9 Cardinality: 1
                         119 TABLE ACCESS BY INDEX ROWID TABLE FA.FA_DISTRIBUTION_HISTORY Cost: 8 Bytes: 126 Cardinality: 6
                              118 INDEX RANGE SCAN INDEX FA.FA_DISTRIBUTION_HISTORY_N2 Cost: 2 Cardinality: 6
               123 TABLE ACCESS BY INDEX ROWID TABLE FA.FA_LOCATIONS Cost: 1 Bytes: 38 Cardinality: 1
                    122 INDEX UNIQUE SCAN INDEX (UNIQUE) FA.FA_LOCATIONS_U1 Cost: 0 Cardinality: 1

Release Strategy for Contract is not getting picked whereas it is ok for PO

Dear Experts,
I have created release strategy for PO with doc type, p.org, net value as chars and frg_ekko as class and release group as 02.
I kept NB,FO,MK and WK as char values. it is working fine for PO's whereas it is not getting picked for Contracts. we need same release strategy for PO as well as for Contract.
Kindly resolve the issue.
Satish

S0004830404 wrote:
Dear Experts,
>
> I have created release strategy for PO with doc type, p.org, net value as chars and frg_ekko as class and release group as 02.
> I kept NB,FO,MK and WK as char values. it is working fine for PO's whereas it is not getting picked for Contracts. we need same release strategy for PO as well as for Contract.
>
> Kindly resolve the issue.
>
> Satish
hi,
use create other characteristic for value CEKKO-GNETW in this use the mk , wk values in value field and assign this characteristic to your class and save.
Thanking you

Output Message Type MAHN not getting picked up in PO

Hello Experts
   I have configured customized output type ZMAH (similar to MAHN) for reminder process. When I am creating PO this output type is not getting picked up automatically. If I am maintaining it manually I am able to send message for ME9F (Purchase Order) and ME91F (Reminder) successfully. Upon deremination analysis I am getting this message 502 " Output ignored (requirement 103 not fulfilled) ". Reminder are getting picked up from Purchase Value Key to PO.
Any help is appreciated.
Thanks
Ankit

Hello Tej
I have maintained output device but same result.
Here I am listing all parameters that I have used for configuration can anyone please take a look and let me know if I am missing anything
Steps for new Message Type for PO Reminder (ZMAH)
1.     Defined new Table 026 Purchasing Output Determination: Document Type
                                                    (ii) 027 Purchasing Output Determination: Purch. Org./Vendor for EDI
2.     Defined new access sequence Z515 Access Sequence for Archiving.
Following are parameters to the Access Sequence
Access Sequence Number = 1
Table = 026
Description = Purchasing Output Determination: Document Type
Requirement = 103
Exclusive = Yes (box checked)
Access Sequence Number = 2
Table = 027
Description = Purchasing Output Determination: Purch. Org./Vendor for EDI
Requirement = 103
Exclusive = Yes (box checked)
3.     Maintain Output Type ZMAH for PO
General Data
Access Sequence = Z515
Access to condition (Checked)
Multiple Issuing (Checked)
Change Output
Program = SAPFM06P
FORM Routine = ENTRY_NEU
Replacement of Text Symbol
Program = SAPMM06E
FORM Routine = TEXT_SYMBOL_REPLACE
Default Values
Dispatch Time = Send Immediately (when saving application)
Transmission Medium = External Send
Communication Strategy = 0001 (E-mail Document)
Processing Routines
Transmission Medium = 5 (External Send)
Program = SAPFM06P
Form Routine = ENTRY_NEU
Form = MEDRUCK
Partner Roles
Medium = External Send
Funct = VN
Name = Vendor
4.     Fine-Tuned Control: Purchase Order
Oprat. = 3
CType = ZMAH
Name = Output for Reminder
Short Text = Urging letter (expediter)/reminder
Update Print Related Data = Yes (checked)
5.     Maintain Message Determination Schema: Purchase Order
Procedure RMBEF1 (Purchase Order)
Step = 101
Cntr = 3
CTyp = ZMAH
Description = Output for Reminder
Requirement = 103
6.     Assign Schema to Purchase Order
Procedure RMBEF1
7.     Define Partner Roles for Purchase Order
Out. = ZMAH
Med = 5 (External Send)
Funct = VN
Name = Output for Reminder
Name = Vendor
8.     Test Condition Maintained in MN04 (Master Data)
Purch. Org. = 0001
Vendor = 101281
Partner Funct = VN
Medium = 5 (External Send)
Date/Time = 4 Send immediately (when saving application)
Output Device = LP01
Cover Page Text = Reminder PO number &EKKO-EBELN&
Also I have configured Purchasing Value Key, reminders are coming to PO correctly.
Thanks
Ankit

Force index not getting picked up while running the SQL Quer

Hi All,
We are facing an issue with one SQL Query. We have created a custom Index and we are using that index in our query by using the following syntax:
/*+INDEX(ol XXEXH_ORDER_LINES_N2)*/
Where
ol – Table Alias Name
XXEXH_ORDER_LINES_N2 – Index Name
But still the index is not getting picked up in the Explain Plan.
If any one of you have faced a similar issue then please let us know how you had resolved it.
Appreciate your help.
DB version:10.2.0.4
Apps version: 11.5.10.2.0
Regards,
Manpreet
Edited by: 876912 on Aug 3, 2011 2:49 AM

Hi;
For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Database or Forum Home » Database » SQL and PL/SQL which you can get more quick response
Regard
Helios

EXW price is not getting picked up during preference determination

HI .. all,
We have transferred Sales order from ECC to GTS. But during prreferrence determination, EXW price of the Sales order is not getting picked up.
Please suggest if any configuration is missing .
Thnks in Advance .

Hi Sapcongts,
Of course you should not modify standard SAP code, and I will not help you to do that.
I don't agree with your idea of proposed and actual EXW values. The Sales Order is your way of recording the customer's Purchase Order, and the price should be fixed at that point. The billing process should not change the agreed price of the goods - only perhaps re-calculate taxes and any other charges that could not be confirmed at the time of order.
If your standard prices are offered as FOB, then I can understand your needing to subtract some components to reach the EXW price, but in that case you will have problems transferring the correct amount to GTS. As I mentioned earlier, you can manipulate the data in the BAdI /SAPSLL/IFEX_SD0A_R3, but I had not looked closely enough at this specific requirement. Unfortunately the pricing table KONV is not provided in the BAdI and that data will not yet be available in the database. Provided the elements to be subtracted are to be read from Master Data, then you could make that same subtraction again in the BAdI. But if there are complex dependencies, it might not be easy.
Having looked in more detail at the code, I think you would be reasonably entitled to complain to SAP about missing functionality here. In the ERP system, the SD pricing provides a specific sub-total (KOMP-PREVA: subtotal 8) for Preference Value, and you can easily configure that to be filled after your subtractions. But that subtotal is not used in the GTS mapping, and I think that's a mistake. You might want to create an OSS message about it, requesting that the GTS Preference value be taken from the sub-total that was clearly designed exactly for that purpose.
In any case, good luck with the project.
Regards,
Dave

CST is not getting picked up in sales order

Dear Experts,
We are following TAXINN procedure and we have maintained condition record for excise condition type - JEXP, JECS & JA1X and tax condition types - JIVC and JIVP. But in sales order, Excise condition types and Vat is getting picked automatically for local customer. But if I chose a CST customer CST is not getting picked automatically even though I have maintained condition record for the same. I have told my client to use alternative tax classification but my client doesnt want to follow this procedure.
Kindly let me know, how can I make the CST to be picked automatically in sales order.
Thanks & Regards,
Reji S

Dear Reji,
These may be the possible areas for the issue.
1.Check the ship to party Tax classification in the customer master>Sales area data>billing tab.
2.Check the Tax classification of the material master-->Sales org data view.
3.Check the region of the ship to party.
I hope this will help you,
Regards,
Murali.

Custom Field Not Getting Picked Up in BOR Event

Similar Messages

Maybe you are looking for