Custom mySQL - updating path / problem with pre-installed mySQL

I've got a custom mySQL installation setup and humming along on a 10.6.4 server. The problem is although I've updated the paths to search on usr/local/mysql/bin, when I try to access by using the shortcut mysql i get this error: Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' . To be clear, mySQL is working fine - it's just the shortcut that's not.
This makes me think that the shell is looking first at the default [not enabled] apple mysql install. So something in my paths must be wiggy.
I had this working perfectly on my 10.4 Xserve but the no one, I'm at a loss.
Has anyone else run into this - any tips? I'm not going to be running the Apple install of mySQL.

Actually, my problem is not with the socket location but with the data directory location. But I think is caused by the same path problem to data as yours was with socket. I have posted this question to the Mac OS X Technologies > Unix forum. If you could take a look, I would appreciate it.
Thanks.

Similar Messages

Took delivery of imac yesterday with pre-installed Pages, Numbers and Keynote. App store says they need updating but won't let me because I've never owned the major version of the software. I have paid like anyone else, so why can't I update?

Took delivery of imac yesterday with pre-installed Pages, Numbers and Keynote. App store says they need updating but won't let me because I've never owned the major version of the software. I have paid like anyone else, so why can't I update?

You must be signed into the Apple Store with your Apple ID or it won't work.
and
How to deal with a 100 Store Error:
Try here > Mac App Store: "An unknown error occurred (100)" when purchasing
If that doesn't help, open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here;
~/Library/Caches/com.apple.appstore/Cache.db
Click Go
Move the Cache.db file to the Trash.
Now here:
~/Library/Preferences/
Click Go
Move these files from the Preferences folder to the Trash.
com.apple.appstore.plist
com.apple.storeagent.pllist
Now here:
~/Library/Cookies
Click Go
Move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Empty the Trash, try the App Store.

How can I dual-boot Windows 7 with pre-Installed Windows 8.1

Hi, I have a Toshiba Satellite C55-B5362 with pre-installed Windows 8.1.
Make DualBoot Windows 7 and Windows 8.1 (both 64 bit), so, I don't know how to do this. If I set BIOS to CMOS and Install Windows 7 disabling Secureboot, I will lost all the pre-installed Windows 8.1 and the OEM licence.
and other question... if the upper is not possible. Okay. I will delete Windows 8.1 and Install Windows 7 permanently until Windows 10 is released, but.... If I have Windows 7 with CMOS BIOS and SecureBoot disabled, then supposing that I could have problems with Windows 7, and I want to upgrade to Windows 8.1 again, and supposing that I have a Recovery Partition backed in a USB drive, what can I do for re-install OEM Windows 8.1 and the licence.
Thanks.
Solved!
Go to Solution.

As I said above...
..you will need to install essentially all of them to make that laptop work as designed.
..install the TVAP before any other Toshiba utility.
-Jerry

Pre-install mysql doesnt work!

I try to start pre-installed mysql with "mysql start" log shows "ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (38)", then I create a subdirectory /var/mysql/ owned by root:wheel and grant 777 to it. still not working. Anyone knows how to fix it?

See if the information in this thread helps: http://discussions.apple.com/thread.jspa?messageID=12163732

Problem with BigInteger and MySql

Hi !!
I've a problem with BigInteger and MySql.
I've a BigInteger object (suppose that value is 0.02270412445068359375).
I must store that value in a database (MySql).
The value of BigInteger object must be stored in a column of type Decimal.
Stored value is 0.022704124450683594. Why ??
My target is to store 0.02270412445068359375
Can anyone help me?
Thanks.

Hi !!
I've a problem with BigInteger and MySql.
I've a BigInteger object (suppose that value is
0.02270412445068359375).
I must store that value in a database (MySql).
The value of BigInteger object must be stored in a
column of type Decimal.if this is the case I fear you are SOL. a decimal is the same size as a double but with a fixed max number of decimal places. if it isn't big enough then you have no real choice other than to VARCHAR it.
Stored value is 0.022704124450683594. Why ??
My target is to store 0.02270412445068359375
Can anyone help me?
Thanks.

Update/Insert Problem with Oracle Warehouse Builder

Hello,
i have update/insert problem with owb.
Situation: I have a source-table called s_account and a target table called w_account_d. In the target table are already data which was filled trough the source table inserts. Now anyone make changes on data on the target table. This changes should now give further on the source table with an update operation. But exactly here is the problem i can´t map back the data to source because that will create a loop.
My idea was to set a trigger but i can´t find this component in owb or is anywhere hidden?
Also i have already seen properties as CDC or conditonal loading in the property inspector of the table, but i have no idea how it works.
Give it other possibilities to modeling this case? or can anyone me explain how i can implement this eventually with CDC?
I look forward for your replies :)

Hi
thanks for your answer. I follow your suggestion and have set the constraints of both tables into the database directly.Nevertheless it doesn´t work to begin. In the next step i found by right click on a table the listpoint "configure" - I goes to "unique key" --> creation method and set here follow options: Constraint State = ENABLE, Constraint Validation = Validate. That error message that appears before by the deployment disappears yet. Now i start the job to test if the insert/update process works right. Finally it seems to work - but not really.
My Testscenario
1. Load the data from source table about the staging area to data warehouse table: Check - it works!
2. Change one data record in source table
3. Load the source table with changed data record once again to staging area: Check - it works!
4. Load new staging area table with the changed data record to data warehouse table: Check it works! BUT, BUT i can not recognize if it is insert or update operation, then under the design window by jobs execution windows is reported "rows selected 98", Rows inserted" is empty and "rows updated" is empty. So i think works not correct, then my opinion if it works correct it should show be "rows updated" 1.
What can yet now still be wrong or forgotten? Any ideas?
*By the way think not 98 rows there is not important if you make an update or insert which performance. It is an example table the right tables have million of records.*
I look forward for your answers :)

Automatic page updates causing problems with your screen reader? this kind of message come when i access yahoo mail.yahoo mail page not come properly.

Automatic page updates causing problems with your screen reader? this kind of message come when i access yahoo mail.yahoo mail page not come properly.i can't chat,compose mail nothing accessing.

Try Refresh Blocker: https://addons.mozilla.org/firefox/addon/992

Automatic page updates causing problems with your screen reader

i want to know whats going on with this Automatic page updates causing problems with your screen reader and yahoo does not work and in order for me to even email you for this question i have to use internet exp I have found this complaint many times in the forum but with no real answer how to fix the dang thing will you please tell us what your doing about this problem and or do we have to go back to using internet exp there are more sights than yahoo that no longer work with mozilla please let us no what is bieng done about this problem if any thing
== URL of affected sites ==
http://
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SearchToolbar 1.1; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729; eMusic DLM/4; OfficeLiveConnector.1.4; OfficeLivePatch.1.3; InfoPath.3; .NET4.0C; AskTB5.8)

Try Refresh Blocker: https://addons.mozilla.org/firefox/addon/992

Problems with new instalation of Photoshop Elements 12

Windows 7
I have had continual problems with PE 9 with error messages to uninstall and reinstall Error 16.
So I thought buy version 12 that should do the trick BUT NO I uninstalled version 9 and installed 12 from disk on the 20th August.
Updated with Application Manager and all was well. Yesterday will not load and Error 16 as before. Tried run as administrator and was told I needed a newer version of Update Manager. Downloaded and installed version 8 still no joy and this then updated to Adobe Creative Cloud. The Application still will not open and I am getting fed up with Adobe applications, when they work their fine but I have no luck getting them to work long term.
Having bought this I am reluctant to move on and incur the cost of an alternative but I am fast running out of patience with Adobe
Any Hep Would Be Appreciated

Barbara B
Thanks for link. Worked through Windows Vista/7 settings got to Set permissions but no Adobe PCD folder. Uninstalled and reinstalled PE 12 software 5/9, PCD now there and application running OK as was the initial installation.
6/9 on start-up, Creative Cloud identified update for PE 12, Application Manager appeared and I run update, after, application running OK and Adobe PCD still there. Checked settings and permissions against link document permissions not as suggested but application working so made no changes.Will the application continue to work, that’s the next question, from previous experience with the initial installation and with PE 9, I have my doubts.
If the loss of Adobe PCD is the cause of the problem, what makes it disappear ?
Les

Problems with Tiger Install

Previously having OS 10.2, I tried to install 10.4 from an installation disc over 10.2, and it failed to install. After failing to install, the computer made me restart, and now it goes to a screen giving an error about a Mac OS 10.4 and 10.5 Driver. The Computer can't find drivers for 10.4 and 10.5. I cannot boot from an Apple I-care disc, the machine tries to boot into an OS, but there is a question mark, instead of an OS Icon in the middle of the screen, and then shortly after comes the error message. The machine locks up.
I thought maybee the problem was intalling OS10.4 as an update, because there was a gap between version previously installed and the new one, but the installation guide says OS 10.2 or later is updatable.
Please Help.

Hi Brandon,
If you are not able to start up from your installation DVD there might be a problem with your DVD drive.
If this is the case then there are two things you might do:
1- (and most obvious) take your Mac in for repair.
2- Fire Wire Target Disk Mode... (For this option you will need a second Mac)
- Target Disk Mode will basically turn your iMac into an external HD, by doing this you will be able to use a second Mac with a working disc drive to start up from the Tiger DVD and then install it on your iMac.
If you are going to do this it is important that no other FireWire devices are connected to either of the computers.
How to start your iMac in Target Disk Mode: Start up the computer and immediately press and hold down the T key until the FireWire icon appears.
Once you have done this connect it to the second Mac (with FireWire)
Now insert the Tiger DVD in the second Mac, when the disk appears on the Desktop open it and double click on "install"
A window with a restart button will appear... click and restart (there will be no need to hold the "c" key.
Once the computer has started up from the Tiger DVD you need to find UTILITIES or TOOLS (i can remember the exact name) on the top bar
Click on it and open Disk Utility then follow the steps of my previous post.
Make sure that you have selected the correct HD to erase and install (it will not be the first one on the list)
Good Luck.
S

Java update causes problems with color printing in Mac 10.5

Had a big problem with color printing for the last two weeks. Thought the printer was broken because it would freeze and refuse to be "seen", or would generate error messages. Bought new Samsung 315, and had the SAME problem. Bought new HP CP1518ni, and had the SAME problem. Not resolved after talking to tech support at both places.
Looked for software updates around the time of the onset of printing problems. on May 15 installed "Java for Mac OS X 10.5 update" (1.0) (am running on 10.5.8). Removed the Java preferences files (com.apple.java......plist) and restarted.
Problem solved! Clearly not the printer.

Hmmm. This is about the time my printer stopped printing too. I've now had two printers in my house and had trouble with both of them. What a pain we should not have to delete updates for our stuff to work together.
Renee

N5548P with NX-OS 5.0(3)N2(1) wont work with 2248TP and 2232PP with pre-installed Fabric Extender OS

Hi,
We recently bought 2 N5K and 4 N2K Fabric extenders, now we are having problem installing the fabric extenders as the FEX just wont go up.
switch(config-fex)# sh fex 100 detail
FEX: 100 Description: ADM/128-SVF-NS302   state: Offline
FEX version: 4.2(1)N1(1) [Switch version: 5.0(3)N2(1)]
FEX Interim version: 4.2(1)N1(0.002)
Switch Interim version: 5.0(3)N2(1)
Module Sw Gen: 21 [Switch Sw Gen: 21]
post level: complete
pinning-mode: static    Max-links: 1
Fabric port for control traffic:
Fabric interface state:
    Po3 - Interface Down. State: Configured
    Eth1/7 - Interface Down. State: Configured
    Eth1/8 - Interface Down. State: Configured
    Eth1/9 - Interface Down. State: Configured
    Eth1/10 - Interface Down. State: Configured
Fex Port        State Fabric Port
Logs:
11/22/2011 07:49:23.536463: Offlining Module
11/22/2011 07:49:23.564858: Deleting route to FEX
11/22/2011 07:49:23.572372: Module disconnected
11/22/2011 07:49:23.573795: Offlining Module
11/22/2011 07:50:34.741573: Module register received
11/22/2011 07:50:34.742363: Image Version Mismatch
11/22/2011 07:50:34.742496: Registration response sent
11/22/2011 07:50:34.742741: Requesting satellite to download image
11/22/2011 07:52:55.922414: Image preload failed.
11/22/2011 07:52:57.91269: Deleting route to FEX
11/22/2011 07:52:57.106904: Module disconnected
11/22/2011 07:52:57.108092: Module Offline
11/22/2011 07:52:57.110203: Deleting route to FEX
11/22/2011 07:52:57.115149: Module disconnected
11/22/2011 07:52:57.116546: Offlining Module
11/22/2011 07:52:57.150559: Deleting route to FEX
11/22/2011 07:52:57.155607: Module disconnected
11/22/2011 07:52:57.156970: Offlining Module
11/22/2011 07:52:57.189131: Deleting route to FEX
11/22/2011 07:52:57.193969: Module disconnected
11/22/2011 07:52:57.195342: Offlining Module
11/22/2011 07:52:57.234153: Deleting route to FEX
11/22/2011 07:52:57.239023: Module disconnected
11/22/2011 07:52:57.240432: Offlining Module
11/22/2011 07:54:40.815191: Module register received
ADM_128-SVF-NS102(config-fex)# sh fex 101 detail
FEX: 101 Description: ADM/128-SVF-NS304   state: Offline
FEX version: 4.2(1)N1(1) [Switch version: 5.0(3)N2(1)]
FEX Interim version: 4.2(1)N1(0.002)
Switch Interim version: 5.0(3)N2(1)
Module Sw Gen: 21 [Switch Sw Gen: 21]
post level: complete
pinning-mode: static    Max-links: 1
Fabric port for control traffic:
Fabric interface state:
    Po4 - Interface Down. State: Configured
    Eth1/11 - Interface Down. State: Configured
    Eth1/12 - Interface Down. State: Configured
    Eth1/13 - Interface Down. State: Configured
    Eth1/14 - Interface Down. State: Configured
Fex Port        State Fabric Port
Logs:
11/22/2011 07:49:46.163035: Module disconnected
11/22/2011 07:49:46.164468: Offlining Module
11/22/2011 07:49:46.213737: Deleting route to FEX
11/22/2011 07:49:46.219043: Module disconnected
11/22/2011 07:49:46.220454: Offlining Module
11/22/2011 07:49:46.250091: Deleting route to FEX
11/22/2011 07:49:46.255026: Module disconnected
11/22/2011 07:49:46.256417: Offlining Module
11/22/2011 07:51:09.395617: Module register received
11/22/2011 07:51:09.396381: Image Version Mismatch
11/22/2011 07:51:09.396511: Registration response sent
11/22/2011 07:51:09.396756: Requesting satellite to download image
11/22/2011 07:55:08.409032: Image preload failed.
11/22/2011 07:55:09.671589: Deleting route to FEX
11/22/2011 07:55:09.682174: Module disconnected
11/22/2011 07:55:09.683181: Module Offline
11/22/2011 07:55:09.702525: Deleting route to FEX
11/22/2011 07:55:09.710557: Module disconnected
11/22/2011 07:55:09.711930: Offlining Module
11/22/2011 07:55:09.741583: Deleting route to FEX
11/22/2011 07:55:09.746544: Module disconnected
11/22/2011 07:55:09.747934: Offlining Module
11/22/2011 07:55:09.786138: Deleting route to FEX
11/22/2011 07:55:09.791026: Module disconnected
11/22/2011 07:55:09.792426: Offlining Module
I am seeing "image mismatch" definitely because our N5K is pre-installed with 5.0(3) while fex is using 4.2(1) pre-installed.
Is upgrading the N2K possible? Hope someone can help
Thanks,
Ramon

Hi All,
Using the N7K to install the Nexus 2000 yielded the same result as connecting to our N5K.
switch(config-if)# sh fex 101 detail
FEX: 101 Description: FEX0101   state: Image Download
FEX version: 4.2(1)N1(1) [Switch version: 5.1(3)]
FEX Interim version: 4.2(1)N1(0.002)
Switch Interim version: 5.1(3)
Module Sw Gen: 21 [Switch Sw Gen: 21]
pinning-mode: static    Max-links: 1
Fabric port for control traffic: Eth1/11
Fabric interface state:
    Po101 - Interface Up. State: Active
    Eth1/9 - Interface Up. State: Active
    Eth1/11 - Interface Up. State: Active
    Eth1/13 - Interface Up. State: Fabric Up
    Eth1/15 - Interface Down. State: Configured
Fex Port        State Fabric Port Primary Fabric
Logs:
11/28/2011 06:27:09.662264: Requesting satellite to download image
11/28/2011 06:29:15.232681: Image preload failed.
11/28/2011 06:29:16.459514: Deleting route to FEX
11/28/2011 06:29:16.464452: Module disconnected
11/28/2011 06:29:16.465542: Module Offline
11/28/2011 06:29:16.502250: Deleting route to FEX
11/28/2011 06:29:16.507315: Module disconnected
11/28/2011 06:29:16.520566: Offlining Module
11/28/2011 06:30:27.820404: Module register received
11/28/2011 06:30:27.821854: Image Version Mismatch
11/28/2011 06:30:27.822322: Registration response sent
11/28/2011 06:30:27.822512: Requesting satellite to download image
11/28/2011 06:33:01.789172: Image preload failed.
11/28/2011 06:33:03.21324: Deleting route to FEX
11/28/2011 06:33:03.26651: Module disconnected
11/28/2011 06:33:03.27635: Module Offline
11/28/2011 06:33:03.60441: Deleting route to FEX
11/28/2011 06:33:03.64871: Module disconnected
11/28/2011 06:33:03.68626: Offlining Module
11/28/2011 06:34:14.640167: Module register received
11/28/2011 06:34:14.640895: Image Version Mismatch
11/28/2011 06:34:14.641367: Registration response sent
11/28/2011 06:34:14.641546: Requesting satellite to download image
11/28/2011 06:37:33.144396: Image preload failed.
11/28/2011 06:37:34.373433: Deleting route to FEX
11/28/2011 06:37:34.378391: Module disconnected
11/28/2011 06:37:34.379795: Module Offline
11/28/2011 06:37:34.429214: Deleting route to FEX
11/28/2011 06:37:34.433627: Module disconnected
11/28/2011 06:37:34.436989: Offlining Module
11/28/2011 06:38:45.746477: Module register received
11/28/2011 06:38:45.747175: Image Version Mismatch
11/28/2011 06:38:45.747841: Registration response sent
11/28/2011 06:38:45.748041: Requesting satellite to download image
11/28/2011 06:41:57.68356: Deleting route to FEX
11/28/2011 06:41:57.80615: Module disconnected
11/28/2011 06:41:57.83824: Module Offline
11/28/2011 06:41:57.98377: Deleting route to FEX
11/28/2011 06:41:57.102731: Module disconnected
11/28/2011 06:41:57.106928: Offlining Module
11/28/2011 06:41:57.151366: Deleting route to FEX
11/28/2011 06:41:57.155672: Module disconnected
11/28/2011 06:41:57.158411: Offlining Module
11/28/2011 06:43:08.457500: Module register received
11/28/2011 06:43:08.458280: Image Version Mismatch
11/28/2011 06:43:08.458874: Registration response sent
11/28/2011 06:43:08.459069: Requesting satellite to download image
11/28/2011 06:47:41.719070: Image preload failed.
11/28/2011 06:47:42.949044: Deleting route to FEX
11/28/2011 06:47:42.954394: Module disconnected
11/28/2011 06:47:42.955658: Module Offline
11/28/2011 06:47:42.973122: Deleting route to FEX
11/28/2011 06:47:42.978185: Module disconnected
11/28/2011 06:47:42.981593: Offlining Module
11/28/2011 06:47:43.26743: Deleting route to FEX
11/28/2011 06:47:43.31820: Module disconnected
11/28/2011 06:47:43.35748: Offlining Module
11/28/2011 06:48:48.755085: Deleting route to FEX
11/28/2011 06:48:48.760546: Module disconnected
11/28/2011 06:48:48.764950: Offlining Module
11/28/2011 06:48:54.260037: Module register received
11/28/2011 06:48:54.260794: Image Version Mismatch
11/28/2011 06:48:54.261268: Registration response sent
11/28/2011 06:48:54.261452: Requesting satellite to download image
switch(config-if)# 2011 Nov 28 06:51:43 switch %FEX-2-NOHMS_ENV_FEX_OFFLINE: FEX-101 Off-line (Serial Number XXXXXXXXXXXX)
It's very frustrating.
Regards,
Ramon

Dreamweaver CS4 Library Update Pathing Problem

Hi folks,
I've been using Dreamweaver since version 3, but I just
recently encountered a very strange problem which breaks my ability
to update my site with library items. When the problem occurred, I
tried creating a new site definition and the update process worked
until I made a change to the remote host directory for the site.
Once I made that change, the host directory is now somehow part of
the library path even though the host directory does not exist in
my local folder structure.
For example, the correct path to my library item in my
templates and pages is:
"/library/footer.lbi"
However, if in the Site definition window I add the following
entry to the Remote Info category:
Host directory: ABC (or ABC/ as Dreamweaver redefines it)
I get this error message when trying to update the site's
pages (even after rebuilding the site cache):
item E:\My Documents\Web
Sites\www.abc.com\library\footer.lbiE:\My Documents\Web
Sites\www.abc.com\library\footer.lbi contains an invalid path.
When I add the library item to a page (after the Host
Directory change), then this is the path it creates in the Web page
to the library item (and thus causes the error message above):

This site definition worked perfect in previous versions of
Dreamweaver, so I'm confused as to why this strange glitch is
happening.
Links are relative to the document for this site and all of
my sites (as they always have been). Any ideas?

Hi Alan,
I resolved this issue a few months ago. I'm sorry for the delay in a response--multiple career syndrome and online classes are the culprits.
I believe the solution was removing an entry that Dreamweaver had automatically entered in the HTTP address field of the Local Info category on the Advanced tab of my site definition. If my memory serves correctly, Dreamweaver had entered the Host Directory from the Remote Info tab after the HTTP address' domain and somehow this affected library updates. (I have no Testing Server settings entered, by the way.)
Here are answers to your numerous questions as a courtesy, albeit much delayed:
Question: "is this a regular site or an RDS site?"
Answer: I am not familiar with the RDS acronym. I will assume that this may be an acronym referring to data in some way, such as the now deprecated Microsoft Remote Data Services technology. The generic problem posed in my question refers to a static site without any database components.
Question: "Is the icon next to the topmost folder in the local side of the Files Panel a folder icon, or a network icon? [two tiny computers with a wire between them]"
Answer: The icon next to the top identifier or container for my site in the Files Panel under Local Files is always a folder in all of my sites.
Question: "is the Library folder in the root level of the local site folder?"
Answer: Yes.
Question(s): "what kind of drive is E? is it a removable or a network drive? Or is it in your computer?"
Answer: Drive E is an internal hard drive partition in my computer.

Problems with Nforce4 install - audio/ethernet/raid

Just installed my Neo4 Platinum Nforce4 with XP Home SP2. I have a problem with the drivers. I went to the Nvidia site and download both the Unified Drivers and the standalone Kit for XP.
The unified driver set didn't seem to do anything at all, it seemed to quit half way through the install without giving me any finished message. A quick look in device manager and I saw about seven items with yellow warnings!
I then tried the standalone kit which worked better, however after the install I am still left with 3 items in device manager that are giving me warnings. Multimedia Audio Controller, Ethernet Controll & Serial ATA RAID controller. I have no audio at all, I just the BIOS is all is OK, as it is for everything else. In the sound section of control panel there is no audio hardware available.
Can anyone help please? I dunno what I could have done wrong. It's a fresh install.

I have now done eveything you've said. I installed the Nforce drivers off the CD, and then installed Realtek, Ethernet & RAID via Live update. I also tried to do the NVMixer & Nvidia Audio install install. I installed realtek from the add/remove software menu. I then went into add new hardware and did manual install, show all hardware, have disk. Then I browsed to the Nvidia Audio codec folder on my desktop that I download. I was given an option of two drivers "nvmcp" & "nvmpu". I picked the first and ended up choosed "Nvidia audio codec interface" which then installed. It then appeared in device manager. However, when I clicked the audio panel in control panel I still get no audio device installed? I then tried to install NVMixer and when I try to run the application I get this message:
"the application cannot start because it could not detect any NVIDIA Nforce hardware on your system...."
What am I doing wrong? When I did the driver install there were two things listed in each driver "nvidia audio codec interface" and also "nvidia audio processing unit", which should I be choosing? Even if I try and installed the "MVP audio processing unit" I'll get a code(10) device cannot start in device manager. This is kinda confusing.
I also wondered about the RAID controller software. The silicon image drivers that came on the MSI seem horrible, they installed Java too. Is there any way to disable this controller? In the BIOS I can only see one option to enable RAID and when this is enabled device mananger will show an error on an "unknown device". I assume this is the NVRaid? and speaking of NVraid which is mentioned in big fat type on the back of the MSI box, so far I've seen or heard none of it during this installtion?

Problems with JSP and MySql bean.

Hi,
I'm new to JSP and I'm having some problems with it. I'm trying to do a simple login where a java class (bean?) handles the SQL injektion. I have deployed the page on tomcat and it works fine, except that the sqlinjektion does basically nothing. I have installed the mysql driver. I think there is something wrong with the java class, or the way im calling it. It does not produce any error. But its like it would never actually process the java code, because ive tried to append things to error string to see what is going on, nothing happens. everything stay null, no exceptions are thrown. If I implement the code to JSP itself, it does load the driver and print exception that there is no connection to database (which is correct). What am I missing? Code follows:
the sqlhandler:
public abstract class SqlInjektor {
     private static String Database = "*****";
     private static String serverName = "localhost:3306";
     private static String usrName="******";
     private static String passw="******";
     * @return Connection
     public static Connection createConnection(String error){
          Connection mySqlCon = null;
          try{
               Class.forName("com.mysql.jdbc.Driver").newInstance();
          catch(Exception E){
               PrintWriter out = response.getWriter();
               out.println("lol");
          String url = "jdbc:mysql://" + serverName + "/" + Database + "?user=" + usrName + "&password=" + passw;
          try{
               mySqlCon = DriverManager.getConnection(url);
          catch (Exception E){
               E.printStackTrace(System.out);
          return mySqlCon;
     * Metodi saa sy�tteen��n SQL komennon, jonka se suorittaa sek� palauttaa komennon tulokset.
     * @param command
     * @return ResultSet
     public static ResultSet querySQL(String command,String error, Connection con){
          ResultSet rs = null;
          try{
               Statement stmt = con.createStatement();
               rs = stmt.executeQuery(command);
          catch(Exception E){
               E.printStackTrace(System.out);
          return rs;
the jsp page:
<%@ page language="java" contentType="text/html; charset=ISO-8859-1"
pageEncoding="ISO-8859-1"%>
<%@ page isErrorPage="false" %>
<%@ page import="java.sql.*" %>
<%@page import="ot3.User"%>
<%@page import="ot3.SqlInjektor"%>
<%@page import="Javax.servlet.jsp.*"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>vastaanotto</title>
</head>
<body>
<%!      String id;
     String password;
     String error = new String("Error!\n");
     User user;
%>
<%      user = new User();
     session.putValue("currentUser",user);
     id = request.getParameter("authName");
password = request.getParameter("Password");
     Connection conn=null;
     ResultSet rs=null;
     conn = SqlInjektor.createConnection(error);
     if(conn!=null){
          out.println("conn ok!");
          rs = SqlInjektor.querySQL("SELECT * FROM user WHERE id='" + id +"' AND password='" + password+"' COLLATE latin1_bin;",error,conn);}
     try {
          if (rs!= null && rs.next()){
               user.setID(rs.getInt("id"));
               user.setName(rs.getString("name"));
               user.setPassword(rs.getString("password"));
               user.setClearance(rs.getInt("clearance"));
               if(rs.getString("addedby")!=null)
                    user.setAdder(rs.getInt("addedby"));
               if(rs.getString("lastmodifier")!=null)
                    user.setModifier(rs.getInt("lastmodifier"));
               rs.close();%>
               ONNISTU!
          <%}
          else {
               out.println(error);
     } catch (SQLException e) {
          out.println(e.getMessage());
     }%>
</body>
</html>

Hi,
I'm new to JSP and I'm having some problems with it. I'm trying to do a simple login where a java class (bean?) handles the SQL injektion. I have deployed the page on tomcat and it works fine, except that the sqlinjektion does basically nothing. I have installed the mysql driver. I think there is something wrong with the java class, or the way im calling it. It does not produce any error. But its like it would never actually process the java code, because ive tried to append things to error string to see what is going on, nothing happens. everything stay null, no exceptions are thrown. If I implement the code to JSP itself, it does load the driver and print exception that there is no connection to database (which is correct). What am I missing? Code follows:
the sqlhandler:
public abstract class SqlInjektor {
     private static String Database = "*****";
     private static String serverName = "localhost:3306";
     private static String usrName="******";
     private static String passw="******";
     * @return Connection
     public static Connection createConnection(String error){
          Connection mySqlCon = null;
          try{
               Class.forName("com.mysql.jdbc.Driver").newInstance();
          catch(Exception E){
               PrintWriter out = response.getWriter();
               out.println("lol");
          String url = "jdbc:mysql://" + serverName + "/" + Database + "?user=" + usrName + "&password=" + passw;
          try{
               mySqlCon = DriverManager.getConnection(url);
          catch (Exception E){
               E.printStackTrace(System.out);
          return mySqlCon;
     * Metodi saa sy�tteen��n SQL komennon, jonka se suorittaa sek� palauttaa komennon tulokset.
     * @param command
     * @return ResultSet
     public static ResultSet querySQL(String command,String error, Connection con){
          ResultSet rs = null;
          try{
               Statement stmt = con.createStatement();
               rs = stmt.executeQuery(command);
          catch(Exception E){
               E.printStackTrace(System.out);
          return rs;
the jsp page:
<%@ page language="java" contentType="text/html; charset=ISO-8859-1"
pageEncoding="ISO-8859-1"%>
<%@ page isErrorPage="false" %>
<%@ page import="java.sql.*" %>
<%@page import="ot3.User"%>
<%@page import="ot3.SqlInjektor"%>
<%@page import="Javax.servlet.jsp.*"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>vastaanotto</title>
</head>
<body>
<%!      String id;
     String password;
     String error = new String("Error!\n");
     User user;
%>
<%      user = new User();
     session.putValue("currentUser",user);
     id = request.getParameter("authName");
password = request.getParameter("Password");
     Connection conn=null;
     ResultSet rs=null;
     conn = SqlInjektor.createConnection(error);
     if(conn!=null){
          out.println("conn ok!");
          rs = SqlInjektor.querySQL("SELECT * FROM user WHERE id='" + id +"' AND password='" + password+"' COLLATE latin1_bin;",error,conn);}
     try {
          if (rs!= null && rs.next()){
               user.setID(rs.getInt("id"));
               user.setName(rs.getString("name"));
               user.setPassword(rs.getString("password"));
               user.setClearance(rs.getInt("clearance"));
               if(rs.getString("addedby")!=null)
                    user.setAdder(rs.getInt("addedby"));
               if(rs.getString("lastmodifier")!=null)
                    user.setModifier(rs.getInt("lastmodifier"));
               rs.close();%>
               ONNISTU!
          <%}
          else {
               out.println(error);
     } catch (SQLException e) {
          out.println(e.getMessage());
     }%>
</body>
</html>

Custom mySQL - updating path / problem with pre-installed mySQL

Similar Messages

Maybe you are looking for