Custom Template on Sales Order Form -- Actions Preview and Print

Hello All,
I want to get the custom Template enabled for Layout Template associated to Transaction Types.
1) Go to Responsibility: Order Management Super User
2) Setup > Transaction Type > Define
3) Query Transaction Type > In the field "Layout Template" assign it to the appropriate template available in the LOV, i want the custom template available.
Please let me knpw.
Thanks
Rakesh

Hi,
If you search in the XML Publihser Administrator responsibility for the Templates the are getting displayed already (Sales Order RTF, Sales Agreement RTF, ....etc)
you can able to find out the Template Data Source which is of .XSD extension . So if you create a new Template and Assign this .XSD based Data Definition to your Template then automatically your Custom Tempalte will come in the Layout list of transaction Type Setup Screen.
Check this and let me know if you have any complexities in finding these.
reg
Sunil

Similar Messages

  • CRM - Automatic Return Delivery for Customer Owened Repair sales order

    Hi Guys,
    We are implementing Customer Owned Repair sales order Process in CRM and requirement is that once order gets replicated in ECC, automatic Return delivery should be created.
    We have following settings done,
    1. Order Type ZREP has automatic delivery creation set : A
    2. Item category has special stock indicator E and and Returns
    3. schedule line category IR has 653 Movement with special Stock E and availability is not flagged.
    so in this configuration, when i create Order Manually, Return delivery gets created automatically even if there is Zeor stock (Schedule line confirms the Qty) but while Order gets replicated from CRM it does not because schedule line does not confirm the qty (Zero Qty).
    Please advise on this asap as we are in verge of delivery and facing this issue.
    Regards,
    Dharmesh.

    Hello Peter,
    Regarding Posting of Goods Issue for Spare Parts in SAP R/3 Materials Management,
    The data posted depends on the logistics scenario(s) that you use. The system therefore first determines the logistics scenario defined for the combination of transaction type, item category, service organization, and other relevant information required for the scenario (for example, movement type or special stock indicator in SAP R/3).
    Availability information informs you whether the service parts are currently in stock. Each service part item generates a reservation in the back end system, which can be used to trigger an early procurement process.
    To know more about the same refer the below link:
    http://help.sap.com/search/highlightContent.jsp
    http://help.sap.com/saphelp_crm50/helpdata/en/cb/f876d513c56e4e864c15517ff67e92/frameset.htm
    Hope this helps!
    Thanks and Best Regards,
    Shanthala Kudva.

  • Sales Order Form - Order line entering very slow

    When Sales Order form is opened and order lines are being entered; right after entering a partial item number, LOV appears and then when item number is selected from the LOV, the cursor takes about 25 to 80 seconds to reach the next field. Has anyone else come across this issue? Have a TAR/SR opened with Oracle but not much help yet.
    Desperate for help on this one.
    Regards,

    If you are in the WHEN-VALIDATE-ITEM trigger, you cannot navigate back through the list of already entered records (especially if record you are in is not complete). It does delay the validation, but duplicate checks are typically done by querying the database on both WHEN-VALIDATE-ITEM and PRE-INSERT/PRE-UPDATE triggers. This means when entering a new Sales Order, you won't be warned that Line 2 has the same item as Line 1 until you save, but there are no navigation required to avoid issues such as trying to leave the current record before it is valid.

  • Sales Orders Screen: Preview and Print Option Not Available in Actions LOV

    Hi,
    We are using Custom Responsibility for Order Management.
    We can't find the Preview and Print Option in Actions list(Sales Orders -> Query for Sales Orders -> Actions).
    Kindly let me know how to add the Preview and Print Option to the LOV.
    Thanks,
    Tamil

    Hello,
    You have to find this function in standard responsibility and copy this name to your own.
    Regards,
    Luko

  • Doubt in the sales order form - Technical

    Hi Frenz,
    i have a small doubt in custom.pll.
    we have a requirement to give a pop up message, wenever we do scheduling action in the sales order form (Oracle 11i).
    i have written the code like below
    if
    ((block_name = 'LINE') AND ( event_name = 'SPECIAL14'))
    then the pop up message.
    the problem im facing is, the pop up is working fine, when we schedule action is done by(Tools--> scheduling)
    but it is not working whenever i right click on the sales order line and do scheduling.
    what code do i need to include for the right click scheduling?
    please advice.
    thanks,
    Lp

    Hi All,
    Does any1 have any suggestion for my question...
    Thanks,
    Lp

  • Personalizing Sales Order form OEXOEORD

    Hello there
    I am trying to Personalize to Restrict Values in Customer Number LOV in Sales Order Form.
    Condition
    Trigger Event = WHEN-NEW-ITEM-INSTANCE
    Trigger Object = ORDER.CUSTOMER_NUMBER
    Action
    Seq 10, Type = Builtin
    Builtin Type = Create Record Group from Query
    Argument = (SQL Query for record group creation which is later be assigned to LOV)
    I am trying to restrict the Customer Number LOV to only show one specific account_number.
    The thing i am not able to understand there is Builtin Type = Create Record Group from Query. I am not finding anything like Create Record Group from Query. I could see Do_key or go_item or go_block from builtin type dropdown. How do i approach here.
    Can anyone help me in this regard.
    Thank you

    If you're not seeing the Builtin Type 'Create Record Group from Query' then are you on an earlier version of the apps as I'm sure this feature was not available when forms personalisation was first released?
    If memory serves, I think this functionality became available with 11.5.10 CU2 but don't quote me.
    Given your stated requirement of restricting the LOV to one value, and if you don't have the means to use a custom record group for the reason above, have you considered using a different personaliztion to just assign the value you want to the customer number field and then prevent access to the field? This approach has a couple of drawbacks (assigning a value will give you a 'Do you want to save' message whether or not you've entered any other info) but will give the same end result.
    Regards,
    Jon

  • Modifying LOV in Sales Order form

    Hi all,
    I have a requirement.where in i need to hide the values present in an lov.
    i.e.
    In Sales order form, whenever we click on Actions button..we will be getting actions lov, we should modify that lov such that 'Calculate Tax' should not be visible in the list of values.
    As this lov is opening whenever we click on Actions button...we are not able to modify the record group from Custom.pll as the WHEN-BUTTON-PRESSED trigger is not valid in it.
    CAn anyone please suggest me any approach as how to do it.
    Thank You,
    Ahmed

    Mahmed,
    As aweiden indicated, this is an Oracle Enterprise Business Suite (EBS) issue. The appropriate place for you to ask this question is the [ EBS General Discussion | http://forums.oracle.com/forums/forum.jspa?forumID=475 ] forum. As you work with EBS, you will discover that virtually everything is maintained in the database. There is most likely a Value Set defined that supplies the values for this LOV. You need to find out the name of the Value Set so you can modify it to exclude the "Calculate Tax" value. The fastest way to find out the name of the Value Set would be open the Oracle Sales Order form (OEOX????.fmb) and find out which LOV is being displayed when you click on the Actions button. Once you know the name of the Value Set, you can edit the Value Set to exclude the "Calculate Tax" value. Its been a while since I've worked with EBS so I don't remember all the details. I believe you will need the OE Super User responsibility or a SysAdmin Developer Responsibility to have the privileges to modify the value set.
    Hope this helps.
    Craig...

  • Using PDF form as a sales order form on Android device

    Hi,
    I'm working on a digital sales order form solution, and found Adobe Reader for Android looking to be usefull. However I'm stuck with some questions and hoping to find answers here on the forums.
    I don't have a lot of experience with creating PDF's, but I do have sufficient experience with Javascript, so I managed to create form that does some calculations. Everything looks and works alright, but for it to work in the field there are some showstoppers.
    The form I've created has 2 signature fields
    Here are my issues. Please keep in mind that the user (sales representive) is filling in the form on an Samsung Galaxy Note.
    After the form is signed, the user can still make changes to the form. Is there a way to disable this?
    The signature default uses very thick lines. How can I force this to 1px default?
    The last used signature is stored. How can I disable this? (Customers don't want their signature to be stored, as the sales rep could use that to sign other forms as wel..)
    Adobe reader overwrite the original file upon closing. Is there a way to force a 'save as' screen?
    Adobe reader allows a user to make comments and write free hand. I'd like to disable this.
    (I've tried Document Restrictions, but this ruins the document by removing every form field.. )
    I've read something about Adobe LiveCycle server. Could that help me achieve wat I'm looking for?
    I hope someone can help me out and explain some of this

    Check out http://www.pdfemail.net/
    With PDFEmail.net, you can submit XML, FDF, XFDF, XDP data formats or PDF format.
    PDFEmail.net can merge the Data (XML) submission with a blank form using ASP.net, and attaches it to an e-mail message and sends it through SMTP, without client side e-mail software such as OUTLOOK.
    PDFEmail.net is installed on a workstation, and generates scripts and libraries you "UPLOAD" to your ASP.net webserver. There is no server-side installation, and zero programming knowledge is required. PDFEmail.net creates the scripts for you, and you just point your submit button action to the URL of the script.
    PDFEmail.net uses iTextSharp technologies, and includes 1 year of free technical support.
    For more information visit http://www.pdfemail.net/

  • Item should not duplicate in sales order form in line tab ..

    Hi All,
    Not very sure this is the right forum for this if not please tell me the correct forum to post this.
    We have a requirement(11.5.9) which we have to achieve it using custom.pll, as I am very much new to use it need help on this.
    In Sales Order form once we enter in Lines Information TAB,
    For example we will enter Item 'ABCD' at Line 1.1 then again at Line 2.1 if I try to enter the same item 'ABCD' it should pop up a message saying "Item Already Entered" once we press Tab on Ordered Item Field.
    If we enter a different Item it should take as usual.
    I will appreciate if some body posts the code for the same which we can do it using CUSTOM.pll
    Thanks in Advance
    Devender

    If you are in the WHEN-VALIDATE-ITEM trigger, you cannot navigate back through the list of already entered records (especially if record you are in is not complete). It does delay the validation, but duplicate checks are typically done by querying the database on both WHEN-VALIDATE-ITEM and PRE-INSERT/PRE-UPDATE triggers. This means when entering a new Sales Order, you won't be warned that Line 2 has the same item as Line 1 until you save, but there are no navigation required to avoid issues such as trying to leave the current record before it is valid.

  • Unable to Query item number in Sales order form

    Hi Gurus,
    After selecting customer name in the sales order form, i am trying query the part number but application is hangs.
    Can you please let me know is it problem with DBA or technical?
    Recently we uploaded (migrated ) part numbers to oracle..
    Please advise.
    thanks
    AK

    Hi AK,
    check this link
    *PERFORMANCE: ITEM LOV TAKING TOO MUCH TIME ON SALES ORDER FORM IN 12.1.1 [ID 1066964.1]*
    Thanks
    -Arif.

  • Order type Personalization Problem in Standard Sales Order Form

    Hi All,
    We have a problem in personalization of Sales order form.Here we are trying to personalize three field based on order type
    Scenario 1:_
    _Nav-->Oredr Management Super User-->Orders,returns-->Sales Orders-->order type-->standard_
    In this type if we are navigating to lines it should ask the following fields as mandatory
    (Nav-->Oredr Management Super User-->Orders,returns-->Sales Orders-->others form)
    1.Shipping Method
    2.Freight Terms
    3.Shipment priority
    Scenario 2:_
    _Nav-->Oredr Management Super User-->Orders,returns-->Sales Orders-->order type-->Bill only & Internal & RMA_
    then it should navigate to line items without asking those three mandatory fields.
    For that we did the following Personalization through Help-->Diagnostics-->Custom Code-->Personalize
    Level--> Form level
    Enabled-->Yes
    Condition_
    Trigger Event: When-Validate-Record
    Trigger Object: Order
    Condition : +(:ORDER.ORDER_TYPE not like '%INTERNAL') and (:ORDER.ORDER_TYPE not like '%BILL%') and (:ORDER.ORDER_TYPE not like '%RMA')+
    Processing mode : both
    level:site
    Actions_
    seq:10
    type:property
    description:Make field mandatory
    language:all
    enabled:yes
    object type:item
    target object :ORDER.SHIPPING_METHOD
    property name:REQUIRED
    value:TRUE
    Problem+_
    The problem we are facing is when we first select the ordar type as Bill only or Internal or RMA it is working as expected. But first if we are select the order type as standard then we navigiting to lines it is not allowing us without entering those three mandatory fields as expected. Hence the problem is without closing the form we changed the order type as Bill only now also those fields remains as mandatory this is issue .
    So hope the problem is clear to you all and we have to move this in production on tomorrow.
    If somone helps to resolve this ASAP we would thankful to you.
    Thanks in advance
    Regards,
    CSK

    Hi Sandeep,
    Thanks for your quick response.
    you might not have getting the our problem sorry. let me explain you clearly
    If the ordre type is standard the following fields should be mandatory without those fields it should not navigate to line items_
    1.Shipping Method
    2.Freight Terms
    3.Shipment priority
    If the ordar type as Bill only or Internal or RMA_
    1.Shipping Method
    2.Freight Terms
    3.Shipment priority
    non mandatory should navigate to line items
    for that we did three personalization for those three fields as in the previous post
    but the problem is
    when we first select the ordar type as Bill only or Internal or RMA it is working as expected the fiel sare non mandatory the without closing the form if we select order type as standard then if i try to navigate lines it is not allowing me without entering the three fields. But incase first we are select the order type as standard then we navigiting to lines it is not allowing us without entering those three mandatory fields as expected. Hence the problem is without closing the form now we changed the order type as Bill only or internal or RMA now also those fields remains as mandatory this is issue .
    hope now the problem is clear to you .
    Thanks in advance
    Regards,
    CSK

  • Field value disappeared when saved in Quick Sales Order form

    HI,
    We have developed a custom form which is similar to the Find Customer Search form in Quick Sales Order form (Navigate to Tools --> Find Customer).
    The custom form searches Customer and populates the selected customer details in Quick Sales Order form (populating the values in Quick Sales Order form is handled in Custom.pll).
    When we select Bill to or Ship to Contact in the Quick Sales Order form and save the Order, the Bill to and Ship to Contacts are disappeared (If the Bill to and Ship to Sites are not Primary).
    Can anyone please help me on this...
    Thanks.

    Check if 'Audit Trail' is setup in OM Parameters for the OU.
    Also check if "Processing Constraints" are setup correctly.
    For Qty reduction we need to add a new row called "delete".
    Thanks
    -Arif.

  • In Sales Order form populate charges field after saving the Sales Order

    Can we populate Charges field in Sales Order form after saving the sales Order automatically.
    The charges to be calculated based on the amount entered and the item selected in Sales Order.
    In the Manual process it is done by hitting the Actions Button and then select the Charges.
    The charge type would be "Freight Costs"

    by using process_order API, I am able to update the charges field.

  • Change in an LOV query of Sales Order Form not working

    Hi,
    I wish to change the the Order Type (in the Sales Header) displayed in the Sales Order Form when viewed from a particular Responsibility.(11i Instance)
    To be specific only certain order types should be displayed in the LOV when the User tries to create Order from that Responsibility.
    In that process I created an FP with Action --> Builtin -->Create Record Group From Query
    Then in Property-->Object Type-->LOV and Target Object -->ORDER_TYPE Value-->Name of my Query Group
    I downloaded the Sales Order Form and modified the Query of the Group keeping the columns selected and the view used same and added in the Group I created.
    But it didn't work out.
    I tried out by changing my Target Object to SRV_ORDER_TYPE and its corresponding query from the Oracle Form.
    But still it didn't work.
    Please tell me where I'm going wrong.
    Am I not choosing the correct target record group LOV?

    Hi Robert,
    I have successfully accessed a matrix using Visual Basic .Net. It has been quite a challenge while I was at it.
    One important thing to understand is that (unless you access the datasource) in order to access a particular control in a matrix object, this control needs to be visible and enabled. It is like simulating a user accessing the matrix via GUI... if a control is not enabled, you cannot access it (as said via control). That might explain question 1.
    Short sample on matrix handling is here:
    http://www.itwiki.net/ow.asp?SboHowToReadFromAndWriteIntoMatrix
    <b>Q2 - Cell count:</b>
    I have personally never used the Cells count method. It should always return the number of rows. My only guess here is that you are using an old reference on the matrix object in which the rows are not there yet.
    Dim oMatrix As SAPbouiCOM.Matrix
    Dim oColumn As SAPbouiCOM.Column
    Dim oEditText as SAPbouiCOM.EditText
      oMatrix=YourSboForm.Items.Item(38).Specific
      oColumn=oMatrix.columns.item(strColumnname).specific
      oEditText=oColumn.items.Item(1).specific
      Msgbox(oEditText.String)
    The above code should get you the first cell of the first row of the given matrix.
    HTH Lutz Morrien
    P.S.: If you need any more sample code, check with the SAP matrix sample or send me a mail (adress see Http://www.itwiki.net)

  • Issue while updating(Changing) quantity on line at quick sales order form

    Hi,
    I am facing a issue while changing quantity ordered on the order line in quick sales order form. (R12.1.3)
    Although the same logic works exactly as required in 11.5.9.
    There is a custom logic, post booking line status is Awaiting Shipping.
    Now when quantity is changed +(Saved), the status changes to a custom state but at the same time a new row is created with the same line id but different reservation id in the MTL_RESERVATIONS.
    The quantity here is the difference between the original quantity and the new entered quantity.
    And post completion of the custom logic the original row is updated, but being there a additional row the quantity reserved at the shipping tab comes wrong.
    Our requirement is of update which is happening but not the additional insert which is going into MTL_RESERVATIONS.
    The logic is perfect in 11.5.9 and no additional insert is being made.
    Kindly help and give some ideas for the possible reason the issue.
    Please ask for more information if required.
    Thanks,
    Vishal

    Hi Mahendra,
    I have gone through the note id that you have given. sorry to say that, that is refering to diffrent issue.
    Actually what i did is, At form header level, I have hide the fileds using the folder options. once after changes I have closed the form and re-opened it. by that time I can see that Button names got changed in bottom of the "Quick sales order form". Not sure how it become changed. there five buttons over the form, only two button names got changed.
    Kindly suggest any other options.

Maybe you are looking for