Customer Data Loading Procedure from Legcy system to TCA
Hi 2 all
Anybody know that how to upload customer data from legacy system to TCA(Trading Community Architecture) ?
Thanks
Zulqarnain
Hi,
As you are doing a full load from R3 to Bw,first check in RSA3 whether u r able to load the data sucessfully.
You can get error here also.......
Did u do the se up table fill up before the transport or after the transport.If it is Before the Transport then
Delete the Set Up Table and Reload the data,as the Extractor structor wud have got changed after the transport.
In any case ,u should be able to get data in RSA3.
Come back if u the issue still persists.
Rgds
SVU
Similar Messages
-
What are the CRM Trasaction data Data Sources and Data load Procedure
Hi BI Gurus,
Does anybody provide the CRM Transaction data DataSources names and Load procedure into BI7.0
I know the master Data load procedure from CRM to BI7.0.
if you provide Step-by-Step documents it is more help.
Thanks in Advance,
VenkatHi Venkat
In order to find the transactions want you can login the CRM system and then use the transaction RSA6. There you can expand all the subtrees by left clicking on the first line and then clicking expand the further left button. After that you can easily search any datasource you may want
Hope that helps
Rgds
John -
Troubleshooting data load procedure
Hi folks,
I am trying to load data into a model built in cube builder. My data load procedure, which is for a single variable, is failing. Here are details:
Dim structure as follows:
DIM CHANNEL:
SALES_CHANNEL (Output)
SUB_CHANNEL (Input)
DIM BUSINESS_UNIT:
BUS_UNIT (Output)
BDM (Input)
Data is in an MS Access table called FACT_NETSALES, with columns SALES_CHANNEL, SUB_CHANNEL, BUS_UNIT, BDM, and time ranging from Oct 2009 to November 2010.
Data sample:
SALES_CHANNEL SUB_CHANNEL BUS_UNIT BDM Oct-09 Nov-09 Dec-09
CH1 CH1SUB1 BUS1 BUS1BDM1 999999.99 999999.99 999999.99
CH2 CH2SUB1 BUS1 BUS1BDM1 999999.99 999999.99 999999.99
CH2 CH2SUB2 BUS1 BUS1BDM1 999999.99 999999.99 999999.99
CH2 CH2SUB3 BUS1 BUS1BDM1 999999.99 999999.99 999999.99
CH3 CH3SUB1 BUS1 BUS1BDM1 999999.99 999999.99 999999.99
CH4 CH4SUB1 BUS1 BUS1BDM1 999999.99 999999.99 999999.99
CH5 CH5SUB1 BUS1 BUS1BDM1 999999.99 999999.99 999999.99
CH5 CH5SUB2 BUS1 BUS1BDM1 999999.99 999999.99 999999.99
CH5 CH5SUB3 BUS1 BUS1BDM1 999999.99 999999.99 999999.99
CH6 CH6SUB1 BUS2 BUS2BDM1 999999.99 999999.99 999999.99
CH6 CH6SUB1 BUS3 BUS3BDM1 999999.99 999999.99 999999.99
CH6 CH6SUB1 BUS3 BUS3BDM2 999999.99 999999.99 999999.99
CH6 CH6SUB1 BUS4 BUS4BDM1 999999.99 999999.99 999999.99
CH6 CH6SUB1 BUS5 BUS5BDM1 999999.99 999999.99 999999.99
CH6 CH6SUB1 BUS6 BUS6BDM1 999999.99 999999.99 999999.99
CH6 CH6SUB1 BUS7 BUS7BDM1 999999.99 999999.99 999999.99
Here's the procedure:
CLEAR STATUS
USE INITIAL RETAIN
SET Control DB_Name CLIENTTEST
USE &DB_Name UPDATE
CHE UPD
SET Control App_Periodicity MONTHLY
SET Control App_Period October 2009 - November 2010
SET DATE MDY
SET &App_Periodicity
SET PERIOD &App_Period
SET Control App_FACT_Table FACT_NETSALES
SET Control DW_Link LNK_CLIENT
SELECT VAR KPI1_ACT
SELECT CHANNEL
SELECT BUSINESS_UNIT
ACROSS TIME DOWN CHANNEL, BUSINESS_UNIT, VAR
ACCESS LSLINK
CONNECT &DW_Link
BEGIN
SELECT
SALES_CHANNEL,
SUB_CHANNEL,
BUS_UNIT,
BDM,
DATE
FROM &App_FACT_Table
END
Peek only 10
LSS CREATE CHANNEL = SALES_CHANNEL
READ
END
The error I get is:
[Microsoft][ODBC Microsoft Access Driver] Too few parameters. Expected 1.
SQLSTATE: 07001
SQL System code: -3010
What's wrong with the procedure?
Thanks in advance for your help!I figured it out. I was selecting two levels of a single dimension in the SQL statement.
-
How to download the custom Tables to xls from the system?
Hi
How to download the custom Tables to xls from the system?
VijayHi,
Goto SE11, in the table name field give Z*, and click on display. You will get the list of Z tables.
Regards,
Prabu -
How to download the custom Reports to xls from the system?
Hi
How to download the custom Reports to xls from the system?
I know the t code SE38 for reports.
VijayHi
Here the programa name is nothing but a report name???
Vijay -
Why can't I load plugins from file system ?
Hello.
Why can't I load plugins from file system, fore development sake for ex. ?
Thx.
Andrew.For security reasons, the Flash Player doesn't allow applications to access both the file system and the network.
One workaround is to compile the plugins in statically (rather than load them dynamically). The Akamai Plugin Sample shows you how to load plugins either way, you can see the source here: http://opensource.adobe.com/svn/opensource/osmf/trunk/apps/samples/plugins/AkamaiPluginSam ple/. -
Error in loading data into PSA from source system.
Hi Experts !!!
Good morning .
I am trying to load data from SRM source system into BI system.When I execute infopackage,the data is not loaded into PSA and status of the process immediately becomes yellow.After sometime it gets timed out and converts to RED.When I checked the error documentation I found that the iDOCS response was not received from the source system.Detailed error is as below.
System Response
There are idocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further Analysis
Check the TRFC log
you can access this log using the wizard OR menu path "Environment > Transact. RFC> In the source system
However,I was not able to navigate to this path.I think if I can navigate to this path,I can manually push IDOCS from source system to BI system.
Regards,
Mandar.Hi,
Check the DataSource in RSA3, if it is working fine and able to see the data in RSA3, there is no problem in DS level, then check the Mappings and any routines in BW for that DS, if this is also fine then check the below options.
See Dumps in ST22, SM21 also.
Check RFC Connection between ECC and BW systems, i.e. RSA1-->Source System->Right Click on Source system and Check.
You must have the following profiles to BWREMOTE or ALEREMOTE users.So add it. Bcoz either of these two users will use in background to get extract the data from ECC, so add these profiels in BW.
S_BI-WHM_RFC, S_BI-WHM_SPC, S_BI-WX_RFC
And also check the following things.
1.Connections from BW to ECC and ECC to BW in SM59
2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
3.Check Dumps in ST22, and SM21.
4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
See in SDN
Re: Loading error in the production system
IDOC getting struck at TRFC (SM58)
1.Reorg of table (ARFCSSTATE )
2.Incraesing the resources in the system (no of processes and memory ) , as this issue happens owing to this.
Source system tries to send TRFC to target and if there are no WP's available it will come to Transaction Recorded state, and form here it will not try to send this TRFC.So you have to execute this manually.
Also we can increase the timeout parameter so that it can try few more times to send before actually it comes to recorded state.
Regards,
Suman -
Loading W_PRODUCT_D from Legacy System
can some share a document or any pointers to get the details how W_PRODUCT_D and W_PARTY_D(Customer) dim is loading in 7.9.6.3.
I am basically looking source dependencies and joins considered in loading product information and customer information.
based on this i need to load product and customer information from other system.Hi,
I am new to SRM - I have a requirement from my client.
How to create PO's and PO Contracts in SRM by getting the data from and excel sheet?
Is it possible for you to provide the LSMW for this and how to call a FM for data load.
OR
Have you done any abap program to use the functionl modules to load the data? If so, can you provide me.
Please do reply ASAP.
Thanks in advance.
Edited by: abi baski on Apr 8, 2009 8:26 AM -
Data loads running even after system is down?
All,
I have a data load from crm system to BI system currently loading to PSA. while the data load was in process the BI system or server went down for recycling yet the loads are running. Is this becasue the loads are upto the PSA. So to get my basics right, are PSA tables on the source system - I had the knowledge that they have same structures as that of souce system but lie on the BI system
Inputs appreciated.
Thanks!Hi,
You please check that job names in R3 system and find those are active or not.....if those are active then job is running...if they are not active or canled,,,then you please change the QM status for that loads and re run the infopack..it will work
Regards
Srinivas -
Data load fails from DB table - No SID found for value 'MT ' of characteris
Hi,
I am loading data into BI from an external system (oracle Database).
This system has different Units like BG, ROL, MT (for Meter). While these units are not maintaned in R3/BW. They are respectively BAG, ROLL, M.
Now User wants a "z table" to be maintained in BW, which has "Mapping between external system Units and BW units".
So that data load does not fail. Source system will have its trivial Units, but at the time of loading, BW Units are loaded.
For example -
Input Unit (BG) -
> Loaded Unit in BW (BAG)
Regards,
Saurabh T.Hello,
The table T006 (BW Side) will have all the UOM, only thing is to make sure that all the Source System UOM are maintained in it. It also have fields for Source Units and target units as you have mentioned BG from Source will become BAG. See the fields MSEHI, ISOCODE in T006 table
If you want to convert to other units then you need to implement Unit Conversion.
Also see
[How to Report Data in Alternate Units of Measure|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b7b2aa90-0201-0010-a480-a755eeb82b6f]
Thanks
Chandran -
Regarding master data loading for different source systems
Hi Friends,
I have an issue regarding master data loading.
we have two source systems one is 4.6c and another is ecc 6.0.
First i am loading the master data from 4.6c to bi7.0.
Now this 4.6c is upgraded to ecc6.0.
*In 4.6c and ecc6.0c master data is changing.
After some time there is no 4.6c, only ecc 6.0 is there.
Now if i load master data from ecc6.0 to bi7.0 what will happen.
Is it possible ?
Could you please tell me?
Regards,
ramnaresh.Hi ramnaresh porana,
Yes, its possible. You can load data from ECC.
Data will not change, may be you may get more fields in datasource at r/3 side, but BW/BI side no change in mappings structures are same. So data also same.
You need to take care of Delta's before and after upgrade.
Hope it Helps
Srini -
Data load stuck from DSO to Master data Infoobject
Hello Experts,
We have this issue where data load is stuck between a DSO and master data infoobject
Data uploads from DSO( std) to master data infoobject.
This Infoobject has display and nav attributes in it which are mapped from DSO to Infoobject.
Now we have added a new infoobject as attribute to the master data infoobject and made it as NAV attri.
Now when we are doing full load via DTP the load is stuck and is not processing.
Earlier it took only 5 mns of time to complete the full load.
Please advise what could be the reason and cause behind this.
Regards,
santhosh.Hello guys,
Thanks for the quick response.
But its nothing proceeding further.
The request is still running.
earlier this same data is loaded in 5 mns.
Please find the screen shot.
master data for the infoobjects are loaded as well.
I can see in SM50 the process at P table of the infoobject the process is.
Please advise.
Please find the detials
Updating attributes for InfoObject YCVGUID
Start of Master Data Update
Check Duplicate Key Values
Check Data Values
Process time dependent attributes- green.
No Message: Process Time-Dependent Attributes- yellow
No Message: Generates Navigation Data- yellow
No Message: Update Master Data Attributes - yellow
No Message: End of Master Data Update - yellow
and nothing is going further in Sm37
Thanks,
Santhosh. -
How to UNLOCK queues when data is migrated from legacy system to SAP syste
Hi All,
I need some help regarding queues (SMQ2). XI is been used to migrate data from legacy system to SAP system. Sometimes the queue is getting locked. Once the queue is unlocked then the message is processed correctly. So, the incoming queues must be "unlocked" routinely so that they can process through the system. There is a standard report RSQIWKEX available that can be scheduled in SAP system to automatically unlock the queues. Before using the standard report RSDIWKEX, we made sure that we have added parameter MONITOR QRFC_RESTART_ALLOWED set to "1" in Integration Engine specific configuration (TCODE SXMB_ADM).We are unable to analyze the reason for locking of queues and how to avoid it. If the locking of the queues can not be avoided, is there any way to unlock the queues? We tried executing this report but were not successful in unlocking the queues. Please guide us in solving this issue. It would be really helpful if you can give us a direction in solving this problem.
Thanks in Advance,
Shwetha.Hi,
Just check if the Queues are registered in Transaction SMQR.
If its not, then register the Queue by pressing 'Register' Button
Sharif. -
Delta loading procedure from Write Optimized DSO to Infocube
Hi All,
We are using Write optimized DSO in our project to which I am loading data using Standard DSO 0FI_GL_12
From Write optimized DSO, we are loading delta records into Infocube, please provide your inputs to my following questionnaire:
1) I am quite interested to know how the delta records gets loaded into infocube whenever we are using 'Write optimized DSO' as we don't have any image concept in Optimized DSO
Ex: If am using Standard DSO, we have Change log table and image concept will allow to get updated value to Cube
let us assume
Active Table
111 50
111 70 (overwrite)
Change Log Table
111 -50 (X -- Before Image)
111 70 ( ' ' -- After Image) symbol for after image is 'Space'
So if we load this record to the target as a delta the above two records from change log table will get loaded to the CUBE and Cube will have 70 as the updated record
If am using 'Write Optimized',
Active Table
111 50
111 70 (overwrite)
When this record loaded to the cube, as Info Cube is always having 'Additive' feature so the total value will 50+70 =120 which is wrong?
Correct me what feature will work here to get updated value as '70' into Cube from Write Optimized DSO'
2)As the data source is delta capable and having 'ADDITIVE' delta process, only the delta records based on REQUEST ID are loaded into Info Cube with the updated key figure value?
Thanks for your inputs and much appreciated.
Regards,
MadhuHi Madhu,
In best practice, we use WODSO in Initial layer and then Standard DSO. Just for mass data load/staging purpose.
In best practice : Data source ----> WODSO ---> std. DSO
In your case : Data source ----> Std.DSO -----> WODSO.
In both cases if data load design is not in accurate way, then your cube will have incorrect entries.
For ex: today 9 am : 111, 50 (in active table)
Data load to cube, same day 11 am : then cube will have 111 50.
Same day, value got changed in std. DSO 1 pm : 111 70(over write function @ active table).
Same day/next day if you load data to cube, it will have 2 records one is with value 50 and other would be 70. So to avoid such scenarios we should plan load in accurate way. Else make change your DTP settings as ‘source table : change log table.
Coming to your case:
Once after the load to Std. DSO, load data to WODSO by changing the DTP settings ‘Delta Init.Extraction from’ : Change log.
Now data available @WODSO from change log table, then you load to cube In delta mode. -
Is it possible to execute the Data Load Utility from a button?
I want to have a button on a form to load spreadsheet data each day.
Can the XE Utility to load data be called from a button?
How? It is not in any of the documentation I looked at.
JeanNo. The "data load button" is not something you can embed in your applications. However, there are solutions to your problem that have been developed by some very talented folks. Take a look at Vikas' examples here: http://htmldb.oracle.com/pls/otn/f?p=38131:1
Although it wasn't designed with XE it should work just fine.
Earl
Maybe you are looking for
-
IDOC Receiver determines no receiving service
Hi, I have send an R/3 IDOC successfully to XI and find the messag with status OK in the monitor, even the receiving service and the receiving interface is empty. I have configured a message interface and the receiver has an appropriate communication
-
Hi, A while back I created a multipage portlet which links to pages using links with the next_page parameter. Until recently I had used the value for next_page as htdocs/portletname/first.jsp, htdocs/portletname/second.jsp, etc. This worked fine. Now
-
Language Change [Polish - English]
Hello, How do I change my Creative Cloud soft from Polish to English? My Manager has got only Polish and other Slav languages. This sucks quite much so I would appreciate some help here. ... I really hope there is a a way to do so without reinstallin
-
.plugin versus .webplugin files
I have a question that was asked 9 years ago, left unanswered, got archived. I am still on OS X 10.5.8. What's the use of having seemingly duplicate plugin-files in /Library/Internet Plug-Ins/? QuickTime Plugin.webplugin QuickTime Plugin.plugin Flip4
-
How can I play itunes music through one of the usb ports on my new MacBook Air?
Greetings Everyone. I just purchased my first Mac product I want to be able to play music from the itunes app from one of my usb ports to the usb port on the front panel of my Yamaha CD changer. I want to utilize the buit-in DAC of the Yamaha. A fr