Customer delivary adress

HI,
   customer have  four delivaring adreses where we maintain adress any one can give  suggition.
  thanks in advance

Hi,
In standard SAP you can not have multiple address for a single ship to party.You will have to create different ship to parties for a sold to party.These ship to parties will have different address.
Also logicaly if you see ship to party is the one to whom you will actually deliver the stocks.If the address is changing then it is better to have a 4 different numbers.When you will create the order it will pop up the window showing 4 options of Ship to party,You can choose the required one.
Reward points if helpful
Regards,
Amrish Purohit
Message was edited by:
        AMRISH PUROHIT

Similar Messages

  • Customer not displayed in third party PO

    Hi,
    In third party scenario, subsequent purchase order  which generated from TP sales order does  not display/copy customer number in delivery tab.This customer number is required to display VAT code in PO.
    How can the settings be done to copy customer no in third party PO(Delivery tab).
    (*Even in the Purchase requisition triggered by TP sales order,customer number is not copied.)
    Regards

    Hi,
    Which item category u r determining in TP sales order,
    It must be TAS & shedule line CS , then customer number & adress will visible in po or pr in DELIVERY ADRESS TAB.
    Kapil

  • E mail address of customer

    Hi All,
    Can any one please guide me in which table the e-mail address of the cusotmers are stored ..
    I need to display on the report output with the details of the customer and the email address..
    Please help me
    Thanking you in advance,
    Sandhya

    Dear Sandhya,
    Use T-Code SE16 or SE16N & access table KNA1.
    from KNA1 take Customer code & ADRNR (Adress) Feild.
    Then access table ADR6 with Se16N
    Here you will get Email address of Customer against Adress numbers that you got in KNA1.
    Hope this solves your problem...
    Thanks,
    Jignesh Mehta

  • Message R1206 BP Role FS0000 does not exist

    Hi team support,
    I have an error when I try to assign a new role to the BP,  the system display the Message R1206 BP Role FS0000 does not exist.  Then press enter and the message is  error in conversion customizing  for adress type. I have applied  the note 584871 but I get the same error.
    We are release 600 support package level 7.  I 'm looking for a note oss to fix it.
    Best regards,
    Paula Andrea

    Hi Paula,
    It is quite late (and my experience relates to another module), but this may still help somebody:
    I got the same eror (R1206) in Flexible Real Estate for role TR0600. To resolve it, I had to go to SPRO -> Flexible Real Estate Management (RE-FX) -> Business Partner -> Relevant settings for business partner in RE context -> Business partner roles -> Define BP roles (view V_TB003). Here I chose the required role and unticked "Hide" (V_TB003-XSUPPRESS). After that, the message disappered.
    You may need to find a similar setting in your module and also untick "Hide" - this may resolve your issue as well. Try that.
    Good luck!

  • Problem with phonenumber pattern

    Hello,
    I've got a problem with my display and validation pattern for my phone numbers.
    In Holland we have two sorts of phone numbers:
    Always 10 numbers, but some regions have a 3 digit area code,
    other regions a 4 digit area code.
    Example:
    012-3456789
    0123-456789
    This is also the way I want my users to enter the data.
    I want to display them as followed:
    012-3456789 --> 012 - 345 67 89
    0123-456789 --> 0123 - 456 789
    My display pattern right now is: text{999 - 999 99 99}|text{9999 - 999 999}
    My edit pattern is: text{999-9999999}|text{9999-999999}
    My validation pattern is: text{999-9999999}|text{9999-999999}
    (With a pop-up message to fill in 10 numbers, area code seperated from the rest by a dash, as in the example)
    The problem is that the validation works fine, but it always transforms the phonenumber to the first option (999 - 999 99 99).
    How can I fix this?
    Greetings and thanks in advance,
    Sterre

    Hi Veloki,
    You can drag and drop custom "email Adress" object from Custom Object Library. It includes the script for email validation in the validate event of email area.
    // Validate the email address.
    var r = new RegExp("^[a-z0-9_\\-\\.]+\\@[a-z0-9_\\-\\.]+\\.[a-z]{2,3}$"); // Create a new Regular Expression Object.
    // Set the regular expression to look for an email address in general form.
    var result = r.test(this.rawValue); // Test the rawValue of the current object to see
    // if it fits the general form of an email address.
    if (result == true) // If it fits the general form,
    true; // all is well.
    else // Otherwise,
    false; // fail the validation.
    Asiye

  • Cannot connect to control panel

    I dont know if this is the right place to post this but up until today I can no longer use a custom ip adress or anything like that and http://192.168.1.1 wont even connect for me anymore it just sais it has timed out. does anyone have any clue how I cant fix this?

    oh, I understand now... I believe what you are referring to as a custom IP adress is a manually assigned one in your TCP/IP... but let me ask you, which of your computer is getting a problem.. the one you presented is very broad. Can we very specific to get to the exact problem. If only your wireless computer here in not getting online, you must make sure that the wireless settings of your wireless router is exactly the same settings on your adapter or the wireless monitor you have installed on that specific computer that has the wusb54gsc. Or you can use windows xp configuration utility. View the available network list, if your networking is showing on the list, connect to it. You don't need to set static IP adress on youir TCP/IP to get an IP adress. Once your computer is connected, your computer should automatically get an IP adress already.
    "a helping hand in a community makes the world a universe"

  • Available stock information in detail

    I have the following suggestion to improve the logistic part of SAP BO 200X.
    When an article is on stock and there are purchase- or production orders, the salesorder only checks the TOTAL availability of the article.
    Example. On stock Qty 100, the ordered Qty 200.Available stock is Qty 300.
    A customer order is Qty 300 and will be accepted because the available stock is Qty 300, but if the customer wants to know when these goods will be delivered there is no direct answer possible, unless the production or delivery date is known.
    (To find this information you need to do some exploring in divers other programs!)
    This is nessessary for the planning of the delivery date of this sales order, but also for the customer to inform him correctly.
    Proposed solution:
    -Make a button in the (marketing document) order line to display the detailed purchase- or productionorder.
    -Change the current calculation of the available stock and give more detailed information.
    Detail information should be at least: DocEntry; Qty ;Production or Delivery date.
    Kind regards.

    Hi,
    We have a small add-on for this functionality. The basic overview of the add-on is:
    It has a button/context Menu on the Sales Order Entry screen where user can select the Item in the detail grid and click the button / context menu this should populate the screen display the list of Open PO’s with DocEntry / Open QTY along with delivery date.
    This displays the details but there could be Committed Value that would need to be considered say for example…
    In Stock is – 100
    Committed is – 200
    Ordered is - 300
    Actual is - 200
    So Committed value has consumed the 100 Qty’s from In Stock and 100 QTY’s from Ordered. Say we have 3 Purchase / Production order each of QTY 100, so one needs to inform user that he can only use 2 purchase orders while committing the customers. For this we have one more column to the list that will show the QTY committed against the sales order if the committed value is greater than In Stock Value.
    Doc Entry     |       Delivery Date  |   Open QTY      |      Committed
    1001             |          01/10/2007     |        100        |             100
    1002              |         01/15/2007     |        100        |             000
    1003               |        01/20/2007     |        100        |             000
    Is this something similar to what you are looking for if yes then contact us off the forum for detailed specification of the product and pricing.
    If not, we would appreciate your points to enhance this add-on further as we are planning to further extend it. We had done similar small product on the item Master data screen that displayed the details for the committed column. What we had done was, we placed a button on the screen and on clicking the button it would display the list of sales orders (Order Number / Customer/ Delivary date / Whse / QTY / Price) that had this item ordered from the selected warehouse (row in the Grid).
    Cheers,
    Nits
    Manager - SAP Business One
    G r e y t r i x
    It's time to think outside the box.
    Migration, Integration, Customization and Modification Solutions
    E-mail: [[email protected]|[email protected]]  
    Web: [www.greytrix.com|www.greytrix.com]

  • Problem with a pattern

    I have a problem with a pattern.
    I want to put a patter to validate an e-mail but i don´t find the way to do it

    Hi Veloki,
    You can drag and drop custom "email Adress" object from Custom Object Library. It includes the script for email validation in the validate event of email area.
    // Validate the email address.
    var r = new RegExp("^[a-z0-9_\\-\\.]+\\@[a-z0-9_\\-\\.]+\\.[a-z]{2,3}$"); // Create a new Regular Expression Object.
    // Set the regular expression to look for an email address in general form.
    var result = r.test(this.rawValue); // Test the rawValue of the current object to see
    // if it fits the general form of an email address.
    if (result == true) // If it fits the general form,
    true; // all is well.
    else // Otherwise,
    false; // fail the validation.
    Asiye

  • Adding custom field to BP Adress with AET

    Hi experts.
    I have to create several custom fields for the BP Adress, and when going through AET it proposes to create them in the BUT000 table, doesn't gives me another option.
    As a BP is expected to have several addresses, this values can not be saved in BUT000, which we all know is where resides BP header data, and the BP number is primary key.
    I'm not planning to need these fields in the webUI, they are only required for a massive initial load, and I'm using BAPI_BUPA_ADDRESS* function modules to update the address data.
    Could you help me with your advice? Should I make an append structure to ADRC? How could that be reflected in the BAPIS structures I'm using to save the data?
    Your help will be very appreciated my friends.
    Cheers
    Marc

    HI Marc,
    I hope you are right and will work aswell.
    Also, i have another suggestion: instead of extending the BAPI, you can update the ADRC values outside of Bapi. meaning...once the BP is created/udated, you will get BP number, with the bp number, BUT020, gives you the address numbers, with the address numbers you can udpate ADRC through FM "addr_update" if it is for Org, "addr_person_update" for person, "addr_cont_pers_update" for contact person.
    Hope this helps.
    Cheers, Satish

  • Adding existent (not custom!) fields to shipping adress in shopping cart

    Hey community,
    we want to show some more shipping adress fields in the shopping cart (SRM 7.13).
    Quite simple, we thought... only the existent fields "NAME_3" and "NAME_4" should be displayed. But we were not able to do that.
    We tried the following steps:
    - in the WD component /SAPSRM/WDC_UI_DO_SHIPTO view V_DODC_SHIPTO we added the existent attributes NAME_3 and NAME_4 from structure /SAPSRM/S_CLL_SHIPTO to the context node SHIP_TO.
    - we added corresponding labels and input fields to the layout and bind them to the context attributes.
    But the two new fields are not displayed in the shopping cart. Normally, we have to announce new fields and metadata in SPRO - SAP Supplier Relationship Management - SRM Server - Cross-Application Basic Settings - Extensions and Field Control (Personalization)... to extend the structure of customer enhancement for the shopping cart. But there is no chance to maintain fields for shipping adress, because this is neigther header nor item data. Adding them to the INCL_EWW_PD_ITEM_CST_SC structure will display the fields on the positiondata tab.
    Adding fields to the table view "/sapsrm/v_mdfsbc" also doesn't work.
    Any ideas?
    Thanks in advance,
      Steffi

    Hello Werner,
    check in V_DODC_SHIPTO view from /SAPSRM/WDC_UI_DO_SHIPTO Web Dynpro Component if field exists in layout.
    In SRM 7.0, 'NAME_3' is not used. Maybe it is the reason of your problem...
    Regards.
    Laurent.

  • Customer (shipt-to) adress in deliveries

    Hello,
    I need to know in what tables is the data of the adress of the customers (street, location, etc)
    Also, I would need to know if this information exists in delivery tables or this information is only linked to the customer table/s (u can see all this data in vl03n in the right of the customer)
    Thank you,
    Manel

    Hi..
    Check these tables....
    DVK01                                 R/2-R/3 Link: Delivery Header Data R2 -> R3
    FTPT_PNR_ADDRESS          PNR delivery / billing addresses
    EKAN             Vendor Address: Purchasing Document
    Thanks,
    Naveen.I

  • EXIT_SAPMF02K_001: Update customer on the time when vendor adress data chan

    Hello,
    I want to update the adress data of a assign customer, if someone changed adress data in vendor master.
    For this proposal I use the exit: EXIT_SAPMF02K_001
    But my issue is now: Where can I get the temp data. Means where in which structure can I see the new data.
    In the exit itself I have I_lfa1 and some other importing parameters, but this structure dont't have the new data.
    Does anyone have an idea?
    Thanks in advance,
    Michael

    HI,
        Since the user exit was not implemented, i cant debug and say the exact answer, but looks like you can see in I_LFA1 only.
    *"*"Lokale Schnittstelle:
    *"       IMPORTING
    *"             VALUE(I_LFA1) LIKE  LFA1 STRUCTURE  LFA1
    *"             VALUE(I_LFB1) LIKE  LFB1 STRUCTURE  LFB1
    *"             VALUE(I_LFM1) LIKE  LFM1 STRUCTURE  LFM1
    *"             VALUE(I_ADDRHANDLE) LIKE  ADDR1_SEL-ADDRHANDLE
    *"                             OPTIONAL
    *"       TABLES
    *"              T_LFBK STRUCTURE  LFBK OPTIONAL
    *"              T_LFB5 STRUCTURE  LFB5 OPTIONAL
    *"              T_LFZA STRUCTURE  LFZA OPTIONAL
    *"              T_LFBW STRUCTURE  LFBW OPTIONAL
    *"              T_LFAS STRUCTURE  LFAS OPTIONAL
    *"              T_LFAT STRUCTURE  LFAT OPTIONAL
    *"              T_LFLR STRUCTURE  LFLR OPTIONAL
    *"              T_LFM2 STRUCTURE  LFM2 OPTIONAL
    *"              T_WYT1 STRUCTURE  WYT1 OPTIONAL
    *"              T_WYT1T STRUCTURE  WYT1T OPTIONAL
    *"              T_WYT3 STRUCTURE  WYT3 OPTIONAL

  • Second adress for customer in FD01(FD02,FD03) ?

    Hello,
    is there a possibility to enter a second adress for a customer we use in FI ? When i add a new customer with FD01 it is only possible to enter ONE adress for the customer.
    My users want to enter more than this one adress.
    It MUST be possible to enter a second adress ? Am i right ?
    regards, Martin

    hi,
    you can do it by creating contact persons and recording adress.
    btw you can record 4 different streets for customer
    Andreas

  • Adobe customer service wont adress issue with 3 month free trial activation code

    I bought a Sandisk HDHC card  from Fryes.It have an activation code for 3 free months freee Creative Cloud and /Lightroom.When I tried the code it was invalid.When I tried the online chat,they gave me a lot of ********.Will I get the 3 months or will I post this on every SOCIAL MEDIA SITE?.ADOBE NEEDS TO WISE UP!!!

      Its an ADOBE advertisement with their name on it.Product has activation code with it and is still valid.Adobe WONT LIKE ME by the time its over.
          From: ssprengel <[email protected]>
    To: al conlon <[email protected]>
    Sent: Monday, January 12, 2015 10:32 PM
    Subject:  Adobe customer service wont adress issue with 3 month free trial activation code
    Adobe customer service wont adress issue with 3 month free trial activation code
    created by ssprengel in Adobe Creative Cloud - View the full discussionI would call Fry’s about it, not Adobe.  You didn’t pay Adobe, you paid Fry’s, right? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7090387#7090387 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7090387#7090387 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Adobe Creative Cloud by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Is it possible to have an adress field with a Custom Object?

    Hello,
    I would like to link a service request to an account and an intermediary such as a travel agency. But the original datamodel only allow one account per Service Request.
    So, I have created a custom object (Intermediary) that should have similar relations with other objects than the Account one. With this object, I will be allowed to link my two accounts to the SR. But I would like to insert an address field in my custom object. Unfortunately, this kinf of custom field type is not available...
    Is there any solution to have one? Or is there another solution I could use to link 2 accounts to a Service Request?
    Thanks in advance,
    Laurent

    We had the same problem. Decided to use one of the new custom objects (CO-05) for this purpose. The drawback of using it this way is the lack of automatic formating of the address lines by country selected like you get with accounts and contacts. On the good side, you can designate fields for use in interfacing with your external business system, i.e. Oracle eBS, JDE, etc.
    We also added a link to this to bring up a modified Customers On Line form from Oracle eBS that gives us a view of the Quotes, Orders, Service Requests, Installed Base, Invoices and Credit Memos by customer party id number contained in eBS. This is what we call a 360 degree view of the customer.
    Neil @ Emerson Process

Maybe you are looking for