Customer information by salesperson

Hi Freinds,
is there any standard report that will show customer information by salesperson.
Customer master report where we can see the salesman assgined to customer
Sales Report by sales person
I know few standard reports but which will not help in DBM
Sales Employee Analysis - MCTI
Sales Office Analysis - MCTG
Sales Employee, Incoming Orders - MC(Q
Sales Employee Returns - MC-M
Sales Employee Sales Volume - MC-Q
Sales Employee Credit Memos- MC-U
Thanks & Regards,

Hi WISH,
There are no Standard Reports delivered by DBM. However, DBM provides Standard Extractors that can serve as DataSources for a BW System.
You can develop your own BI content (including InfoCubes, Reports, Dashboards) based on these DataSources.
Further info: [http://help.sap.com/saphelp_dbm700/helpdata/en/2f/15882d703f49588019612297e222be/frameset.htm|http://help.sap.com/saphelp_dbm700/helpdata/en/2f/15882d703f49588019612297e222be/frameset.htm]
As far as your specific reporting requirements are concerned, the DBM Order Extractors are able to provide the data that is needed.
The technical names of these extractors begin with 2LIS_DM* and are part of Logistics Information System (LIS).
Regards,
Daniel

Similar Messages

Interactive report for displaying customer information

hi,
how to create an interactive report for displaying customer information based on selection smade ,and corresponding bank details.

pls check the sample code
Use the tables Kna1 and knbk to get the customer details.
***extract the data into internal table
select * from dbtab into itab.
*In the loop hide the field you want to trigger the interactive list.
loop at itab.
write: / itab-kunnr, itab-name1.
Hide itab-kunnr.
endloop.
use at line selecton to get desired output based on the condition
at line-selection.
select * fro dbab into itab where field = itab-kunnr.
awards points if help ful.

Stock report on key date with customer information

Hi Experts,
Is there an available sap standard report that will show available stock in subcontractors or customers at specific date(posting date)?
transaction MC.9 only show consignment stock without customer information we would like to know which customer inventoried this quantity
Thank you for your inputs

Hello,
Thank you very much for your responses. I tried to check transaction MB51 but the customer is not displayed in the report. I found another report S_P00_07000140 that seems to fit the requirements. customer and posting date were also displayed in the generated report. However the SAP menu of this report is:
SAP Menuu21D2Accountingu21D2Financial Accountingu21D2General Ledgeru21D2Reportingu21D2Tax Reportsu21D2Thailandu21D2Inventory and Raw Material for Special Stock Report
Will there be no implications if this is used instead of MC.9 or MB51? what are the differences of the 3 transactions?
Best regards.

Error in saving customer information. Value for contact_point_purpose must be a value defined in lookup type CONTACT_POINT_PURPOSE.

I was trying to create a text alert. I was calling following in jsp
email.setContactPointPurpose(myLookUpCode); //say XXMY_SMS_SHIP
PartyManager.createEmail(email, ApiConstant.CONTACT_POINT);
Getting following exception:
Error in saving customer information.
Value for contact_point_purpose must be a value defined in lookup type CONTACT_POINT_PURPOSE.
Error trace:
oracle.apps.ibe.customer.CustomerException: Error in saving customer information. at oracle.apps.ibe.tcav2.Email.create(Email.java:187) at oracle.apps.ibe.tcav2.PartyManager.createEmail(PartyManager.java:116) at _oa__html._myfile__ibeMyFile._jspService(_myfile__ ibeMyFile.java:908) at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119) at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417) at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267) at oracle.jsp.JspServlet.internalService(JspServlet.java:186) at oracle.jsp.JspServlet.service(JspServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:588) at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456) at org.apache.jserv.JServConnection.run(JServConnection.java:294) at java.lang.Thread.run(Thread.java:662) Caused by: oracle.apps.jtf.base.resources.FrameworkException: Value for contact_point_purpose must be a value defined in lookup type CONTACT_POINT_PURPOSE. at oracle.apps.jtf.util.ErrorStackUtil.getFrameworkException(ErrorStackUtil.java:104) at oracle.apps.jtf.util.ErrorStackUtil.getDBFrameworkException(ErrorStackUtil.java:141) at oracle.apps.ibe.tcav2.Email.create(Email.java:185) ... 11 more Error in saving customer information. oracle.apps.jtf.base.resources.FrameworkException: Value for contact_point_purpose must be a value defined in lookup type CONTACT_POINT_PURPOSE. at oracle.apps.jtf.util.ErrorStackUtil.getFrameworkException(ErrorStackUtil.java:104) at oracle.apps.jtf.util.ErrorStackUtil.getDBFrameworkException(ErrorStackUtil.java:141) at oracle.apps.ibe.tcav2.Email.create(Email.java:185) at oracle.apps.ibe.tcav2.PartyManager.createEmail(PartyManager.java:116) at _oa__html._myfile__ibeMyFile._jspService(_myfile__ ibeMyFile.java:908) at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119) at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417) at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267) at oracle.jsp.JspServlet.internalService(JspServlet.java:186) at oracle.jsp.JspServlet.service(JspServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:588) at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456) at org.apache.jserv.JServConnection.run(JServConnection.java:294) at java.lang.Thread.run(Thread.java:662) Value for contact_point_purpose must be a value defined in lookup type CONTACT_POINT_PURPOSE.

Tried this but it is giving the below error
APP-FND-01242: Cannot read value from field PER_ASSIGNMENT_ID
Cause: The field PER_ASSIGNMENT_ID could not be located or read.
Action: This error is normally the result of an incorrectly-entered field name string in a trigger, or a field name string that does not uniquely specify a field in your form. Correct your trigger logic to precisely specify a valid field.

Adding custom information in HTTP Header in an outgoing request from GWWS

Is there a way to send custom header information with the a webservice request (HTTP post) that happens via GWWS server?
All the methods I read about deal with managing the soap envelop that gets sent.
We are looking for ways which will allow us to put custom information in the headers.
I am aware there is something we can do using the Salt Plugins.
For example, we can write a Out bound plugin which has a capability of putting the "Authentication:Basic..." in the header.
Then there is message conversion plugin which deals with transformation of message, which gives us control over the soap body.
Is it possible to put information in the header for outgoing request (from GWWS) to a specific web service?
Thanks and Sincere Regards,
Mrugendra

Maurice,
Thanks for confirming this.
It clarifies the doubts that I was having while reading through the documentation Xu pointed to.
Yes, we need to add HTTP Headers (not SOAP header).
For now we just need to add Basic Authentication HTTP Header for outbound service calls.
We have developed a plugin to do that for now.
And even if the salt plugin takes care of adding the Basic Authentication in the HTTP Header for outgoing calls, I guess we do not have any option to include some custom information in the HTTP Header which might be required in the future.
At-least, not unless we request that enhancement.
Bringing the plugin into our mix requires a lot of changes to our architecture including inclusion of AUTHSVR in the UBB,
Which, in turn, makes it imperative to change the endpoint clients of our application.
In addition to that, the incoming web service calls also need to include TUXEDO authentication information, which would again require either communicating the authentication information to the consumers of our service or device some kind of a proxy which would add the authentication information for all the incoming requests!
With these facts in mind, we were wondering if we have an easier way to include the HTTP header information.
As you say, Maurice, it seems it is not possible yet.
Thank you again for your replies.
Sincere Regards,
Mrugendra

Custom information in HTTP Header in an outgoing GWWS Request

Hello Xu,
Hello Everyone,
With reference to the recent post activity in the post:
[Adding custom information in HTTP Header in an outgoing request from GWWS|https://forums.oracle.com/forums/thread.jspa?threadID=2366358&tstart=0]
We are looking for an option to send custom header information with the a webservice request (HTTP post) that happens via GWWS server.
I prematurely marked that post as answered since we got a link to documentation in one of the answers, which suggests that problem has been taken care in TUXEDO11gR1.
However, it would be difficult (almost impossible) for us to move to 11gR1 immediately.
Since I marked that post as "answered" and I did not know if replies in that post will get any attention, I opened up this post.
Xu (He) suggested (in reply to my previous post) that there might be a patch for our problem.
It would be wonderful/perfect if we can get a patch for 10gR3!
We are using the following:
TUXEDO10gR3 PATCH LEV=44
SALT Patch Lev = 15
Please do let us know.
Thank you again
Sincere Regards,
Mrugendra

Maurice,
Thanks for confirming this. (in the post: [Adding custom information in HTTP Header in an outgoing request from GWWS|https://forums.oracle.com/forums/thread.jspa?threadID=2366358&tstart=0] )
It clarifies the doubts that I was having while reading through the documentation Xu pointed to.
Yes, we need to add HTTP Headers (not SOAP header).
For now we just need to add Basic Authentication HTTP Header for outbound service calls.
We have developed a plugin to do that for now.
And even if the salt plugin takes care of adding the Basic Authentication in the HTTP Header for outgoing calls, I guess we do not have any option to include some custom information in the HTTP Header which might be required in the future.
At-least, not unless we request that enhancement.
Bringing the plugin into our mix requires a lot of changes to our architecture including inclusion of AUTHSVR in the UBB,
Which, in turn, makes it imperative to change the endpoint clients of our application.
In addition to that, the incoming web service calls also need to include TUXEDO authentication information, which would again require either communicating the authentication information to the consumers of our service or device some kind of a proxy which would add the authentication information for all the incoming requests!
With these facts in mind, we were wondering if we have an easier way to include the HTTP header information.
As you say, Maurice, it seems it is not possible yet.
Thank you again for your replies.
Sincere Regards,
Mrugendra

How do you create a form to capture customer information

Hello,
I have been looking for a form to capture customer information. Name, address, phone, email, & maybe even which service they're interested in. They fill out the form and then there's a submit button at the end which they click to send the information. Is there a form like this in the widgets? Or can someone help me with what is a simple way to capture customer information. Thanks for all of your help.
Matt

HTML cannot do anything with data. You need scripts to collect and process form field data. It would be helpful to know what you intend to do with your captured customer data.
Send data to your e-mail address.
Store it in a database.
Append data to another file on your server.
Forward data to a 3rd party.
Nancy O.

How to set default value to user attribute in customized information tab

Hi Experts,
we created a custom attribute in Administration-managed custom attributes and now we are getting that attribute under customized information tab in user admin->identity management.
This attribute is coming for all users and it is working fine and I can give value to this attribute also.
Now the problem is we have more than 10000 users in the portal and we have to assign same value to this custom attribute to all the users.
Is there any possiblity of setting the value to all the user without coding.
If it is not possible then how can I proceed for coding.
any help will be appreciated.
Raghu

Hi Michael,
Yes my data source is LDAP. This attribute is added in the portal itself and I don't think it is possible to set the value of custom attribute at LDAP.
Shanta : We already created the custom attribute and it is also appearing in the Customized information
Problem is we need to set a value to that attribute. This should be same to all the users coming from LDAP.
My Basis people are asking the funtion module which calls when we click on the Customized information tab. Is that possible to know?
Or we can set this value by writing a piece of code in webdynrpo java?
Appreciate your inputs
Raghu

How to Fetch Customer information at the time of Order Import- Urgent

We have a requirement to Interface data from 2 different systems.
Booking and Order Information data will come from ----Source 1
Customer information will come from -----Source 2
The only Primary key that will be common is the an attribute like 'Customer_ID' that will be sent from 'Source 1.'
Now in Oracle- we need to Import all of the Booking and Order information from Source 1 and also based on the Customer_ID from Source 1 we need to pull Customer address, contact and name details and also the Payment terms that would already be created in TCA before the Order is imported from Source 1.
How will Order Import know to fetch the details of Customer attributes that are required to go into an Oracle Order. (Such as Address, contact details, customer name) - All these need to be pulled usin Customer_ID.

As long as customer is defined in oracle, all you need to pass to the order interface tables is the customer_number( or customer_id).
The order import itself will pull some information such as customer name automatically.
However, your custom code that puts data in the interface table should query up the customer site records / contact records and put the data in the interface table before launching the Order Import.
Hope this helps,
Sandeep Gandhi

Export Customized Information Attributes from EP6 to EP7

Hi Everyone,
Is it possible to migrate User Admin customized information fields from EP6 SP17 to 7 EhP1 SP7? The standard portal user export functionality only collects the standard fields and ignores the custom attributes.
Does anyone have an idea on how this task can be achieved???
Thanks,
Bim.

No longer a requirement, thanks.

Customer information screen not showing when installing photoshop CS2 -- cannot enter serial number

I own Adobe Premier CS2. When I run photoshop installation, customer information screen is not showing. So I cannot enter serial number. I have serial number.

CS2: Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 -
http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

How to add custom information, when Information button "I" is clicked

Hi All,
I have developed a custom collective search help, Now i need to display custom information to the all elementary search help's when Information Button "i" is clicked.
thanks in advance

Hi,
see the given link.
custom control
Regards,
Shamma

Transfer Forecast data based on Customer information for product and plant

Hi,
This is the scenario.
Our characterstics are Product,Plant and Customers
and for 1 plant and product there may be 5 customers.
My characterstics will be
P1 L1 C1
P1 L1 C2
P1 L1 C3
P1 L1 C3
P1 L1 C4
P1 L1 C5
(P1-Product; L1 for Plant and C1,C2...are customers)
Now forecast data will be different for different customers.
I transfer demand from APO to ECC for PRoduct ,Plant and different customers.
Then in ECC how to check for different customers.
If you go to MD63 you can see for plant and product but not for customers.
This is required as we are running MRP for that product for component planning.
Thanks in Advance
Raghavendra Pai

Hi Ragvendra,
In ECC we can transfer at material and plant level only and not information of customer. As you need for MRP run may be you can explore possibility of using some badi and get customer no in requirement plan number or some other feilds.
Other option is planning with descriptive chartceristic in APO only. It is not possible to transfer demand with descriptive charcteristics to ECC.
Here you can forcast demand on customer level. Transfer it as PIR with descriptive charcteristics to PPDS where you can plan for this demand.
For information see link http://help.sap.com/saphelp_scm50/helpdata/en/c1/147a375f0dbc7fe10000009b38f8cf/frameset.htm.
If your requirement is to transfer customer information to ECC from DP in standarad it is not possible as far as I know.
Regards,
Siddharth

Changing Customer Information

I purchased my MacBook in January through a co-worker who happened to part-time at the local Apple Store. He setup the purchase (since it got me a 15% discount) but used my credit card to pay for it, and used my name/address for shipping.
I took it in today to fix/replace the iSight when I noticed that the "Customer Information" contained on the repair slip had the co-worker's name/address instead of mine, although I have registered the machine with Apple (through the website).
My question is: How do I go about changing this information?
Thanks.
MacBook Mac OS X (10.4.9) 2GHz, 2GB RAM, 80GB HD

Call AppleCare (1-800-275-2273 in the US) and have them change the information.
Matt

PM Notifications - customer information

Hi everybody,
Im a newbie in PM module. When I create a PM notification, this one contains customer information. Is there any way to create this customer information without using/having CCS? As I know you can create new customers using SD or FICO module but I'm not sure if these customers are the ones used later for creating PM notifications...
Thanks!
Jessica.

Hi,
Yes, you create the customer first.
You are possibly entering the customer as a partner (sold-to, etc). This partner should be defined as partner type KU (customer) in customizing.
-Paul

Customer information by salesperson

Similar Messages

Maybe you are looking for