Customer Master Data interface to external using Seeburger on MDMP
Hi Experts,
Currently, customer master data is interfaced to external system via IDOC. The middleware used is Seeburger.
If the system is changed to MDMP, would there be any impact to this interface?
Is Seeburger communicates in Unicode? If so, when the data is translated to Unicode when the data from R/3 is non-unicode?
Thank you.
Regards,
Bing Fatt
Thanks Uwe,
I tried to create IDoc with BD10 for material master and I am getting two error msg as below.
Msg one
1 master IDocs set up for message type MATMAS
then Msg two
0 communication IDoc(s) generated for message type MATMAS
Is it able to get why this msg is comng and no IDoc's were generated..
Regards,
Senthil
Similar Messages
-
Unable to extract Customer Master data from MDC
Hello,
We creating an MDM-XI-ERP2005 Customer scenario. We want to work with all bussiness scenarios (not customizing scenario).
First I'm trying to extract Customer Master Data from EP 2005 using MDM_CLNT_EXTR.
I have created a New Variant which properties are:
Variant: CUSTOMER_TOTAL
Description: Send all customer data to MDM
Extraction Object: CUSTOMER_EXTRACT.
Target System: PI7.
But, the display jobs shows the following error: Could not determine recipients for message type MDMRECEIPT. Job cancelled after system exception.
We need to focus the problem. We have done the following ALE configuration.
SALE transaction:
In Basic Settings -> Logical Systems -> Define Logical System we have add the following logical systems:
EUS100
MDM: Master Data Management
PI7: Process Integration 7.0
WE21:
Transactional RFC -> PI7, IDOC record types SAP Release 4.x
RFC destination: SAPSLDAPI
BD64
New Model -> PFMC
Add message type: Model iview: PFMC
Sender: EUS100
Receiver: PI7
Message Type: DEBMDM
WE20 transaction shows:
Partner profiles -> Partner Type LS (logical system)
PI7: Outbound parmtrs. DEBMDM, SYNCH.
Any idea will be very helpful,
Thanks in advance
Marta.
Edited by: Marta Sánchez on Jul 9, 2008 12:34 PMSorry because I made a mistake in my previous message. ALE seems to be correctly configured. I'll try to update correctly my current situation:
In WE02 I can see al IDOCs that I'm trying to send to XI. All them have the IDoc Status = 3 (Data Passed to Port OK) instead of 12 Status Dispatch OK :(. So, It seems an tRFC error.
SM58 shows me more trails: "Basic type 'DEBMDM06' is unknown"
before that I have done the following steps at SAP ERP:
1. WE21: I have created a PI7 port with 700PI70CLNT RFC.
2. SM59: I have checked successfully 700PI70CLNT RFC connection.
3. WE20: I have created a PI7 Partner Type LS with the following inbound and outbound parameters: DEBMDM and MDMRECEIPT.
4. BD64: I have created a Distribution Model with DEBMDM and MDMRECEIPT message types.
and at SAP PI:
5.IDX: Port: SAPEUS. Client: 111. RFC Destination: PI7.
6. technical and business system for sender SAP system(System Landscape Directory)...
- Maybe some of the previous steps is not correct....
- Is RFC Destination = PI7 is correct in step #5?
- Is also necessary to configure more steps in PI system like RFC destinations or Transactional port?
- I have read that is neccessary to check that the option "transfer idoc immediately" in we20. How?
Please any idea will be very helpful.......
Thank you!
Best regards,
Marta. -
Outbond interface programme to upload customer master data.
Hi experts,
i need to develop an outbound interface programme to upload customer
master data,which will be received from sap and posted to web methods using
standard function mudule.can any one help me?Hi,
Hi,
Primary you should have Message type, Idoc type and Function module or Report to process Outbound interface.
If your's is an Customized Process, then follow this.
1. Create Message type in we81.
2. Create segments in We31
3. Create Idoc Type in WE30.
4. Assign Message type to idoc type in WE82.
5.Create an Partner profile in WE20.
6.If you are creating an function Module create it in SE37.
7. Assign it to process code in WE41.
8. Charactersitics of FM in BD51.
9. Assign FM and IDoc And Message type in WE57.
<b>ALE IDOC</b>
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
Regards -
How to configure CVC automation process using SNP master data and BI customer master data
Hi Gurus,
How to configure CVC automation in MPOS structure technically, using SNP master data in CVC creation such as Product and location details
and in parallel extract date from ECC to BI customer master data in DP. Where-in a APO BI cube should have only new combinations which are to be validated with ECC and existing combinations in the MPOS structure before creation of CVC in different regions of MPOS.
Second the automation should also check certain validations of product, location and are part of SNP-ECC master data and are these new combinations.
Could someone guide us in this process.
Thanks
KumarPraveen,
The short answer is to move the data into infoproviders or flat files for all of the 'characteristic-type' source data; and then copy CVCs from the infoproviders into the Planning area, probably using one or more Process Chains (program /SAPAPO/TS_PLOB_MAINTAIN).
The long answer is that this is not a trivial undertaking; this could end up being a pretty involved solution. If you do not have enough BW/DP expertise available locally to create this solution for you, then I recommend you consider engaging external resources to assist you. I personally wouldn't even consider starting to work on such a solution without first knowing a lot more about the detailed business requirements, and about any existing solutions that may already in place. An SCN forum is not really suitable for such an answer. In my opinion, the BBP doc alone would be 20+ pages, assuming no enhancements..
Best Regards,
DB49 -
How to use the customer types in customer master data
how to use the customer types in customer master data?
menu path is Extras -> account group info -> customer typeshi,
This is an option given to you to choose (if you need to) the way you perceive this customer.Here you get options including ompetitors,Salespartner, prospect,
default sp ,consumer.
See it helps you to differentiate between prospect(which you may use for quotation or inquiry purpose)Sales partner and the competetor.
I hope this clarifies your quiery.Reward points if so.
Thanking you,
Best regards,
R.Srinivasan -
How to upload different views of customer master data using LSMW-IDOC
I need to upload customer master data using LSMW Idoc method for my client. Now customer will have different views like main view, Sales data, Company code data, Partner function data etc. And except main data all other data can be multiple for each customer. We are going to upload data from tab delimited .TXT file. Should I propose different LSMW for upload different views for the customer from different .TXT files? or we can upload all the customer related data (like main view data and partner function data )from a single .TXT file. Kindly suggest which one in convenient and how we can prepare the data file in both cases.
convinient is the method that you can handle.
but as the guy who loads the data you have to load the data like they are available, like it is convinient for others to prepare the data.
In general there is no problem to use an IDOC method to load a customer master with multiple comany codes and several sales orgs in one shot.
the data can be in one source file, but need then to be maintained in a certain way
Example1: all data in 1 structure
GD1 - CC1 - SO1
GD1 - CC2 - SO2
GD1 - CC2 - SO3
in this case the GD (general data) is redundand in each line which has different Company code data or different Sales Org data
Example2: all data in 3 sturcures but one file
GD1
.CC1
.CC2
..SO1
..SO2
..SO3
Example3: data delivered in 3 files - you join the files in LSMW, they must have a common identifier like the old customer number in the beginning of each file
FILE General data:
GD1
GD2
GD3
file Compamy code data:
CC1
CC2
CC3
file Sales org data:
SO1
SO2
SO3
LSMW is flexible and can handle each of this scenarios, are you flexible too? -
I am unable to upload the customer master data using BAPI.?
Hi Guru's,
i am unable to upload the customer master data using BAPI.(BAPI_CUSTOMER_CREATEFROMDATA1)
Please guide me how upload the data...
Thanks in iadvance
Srinivas...Hello Srinivas
This BAPI does not allow to create a new customer from scratch but only to copy an existing customer to a new one and change its address data.
The reference customer has to be provided using IMPORTING parameter PI_COPYREFERENCE. See also the BAPI documentation for more details.
The BAPI does the same like transaction XD01 with Reference.
Regards
Uwe -
How to find the Acoount Group used while creating the customer master data.
Hi,
I am in xd03 mode displaying the customer master data. I want to know the ACCOUNT GROUP which was used while create this customer. How can i find it? Can any one tell me the process to find the account group?
Thanks in advance.Enter the customer number in XD03 and click enter. Once the screen displays the customer name go to dropdown extras--> Administrative Data. This will give you the account group and the creation date of the customer. The same is stored in KNA1- KTOKD.
Thanks
Indranil -
Loading customer master data using lsmw and bdc
Hi all..
Iam a beginner in sap world and my first project is to load the customer master data from mainframes into sap.
Can anyone guide me how to approach to this project and what are the best materials to go through. Also can any one send some sample programs related to these..
It would be a great help of you guys for a beginner like me..
Thanks,
mahiMessage type DEBMAS
Idoc type DEBMAS** where ** is highest number available in your system (check via WE30). e.g. DEBMAS06 -
What is the difference of customer master data between CRM and ECC
Dear all,
We are helping customer to evaluate using CRM or ECC to manage there customer master data, focusing on the benefit of using CRM system.
Can any one help to compare the difference between these two system?
some tips in my mind are:
1. CRM has a friendly user interface for user to adjust the layout, hide/display favourite information according to actuall req.
2. In CRM, user can change the field/assignment block description easilly
3. in CRM7.0, user can add new customzing field easilly via AET
4. CRM has a good any analysis platform to provide pie chart analytic
5. CRM store more customer infor. than ECC, such as Marketing attribute, account classfication...anything else?
any other benefit to use CRM for customer master data? Pls help!!!
Thanks very much!!
BR,
HedyI would agree with most of the topics you mentioned. Just one remark to topic number 5. Business partner doesn't have more data than erp. It has some more marketing oriented data, but on other hand doesn't have all finincial and credit data that are relevant for erp financial transactions.
In our company we have the following scenario: all business partners are created in crm (because there the sales activities are started and because we don' clasify at the begining all partners as customers but as prospects. and of course it has nicer user interface). but when we are closing the deals (ordreds are transfered to erp), we fill some additional (financial) data of that partner on erp side and clasify partners as customers.
Regards. -
Customer master data, Materials master data integration Integration in XI
Dear Experts,
I need your help in the following cases
We are integrating MDM 5.5 to ECC6.0 via XI 3.0.
1. I am not able to understand exactly what interfaces, mappings, integration scenarios from sap delivered MDM Business Content need to use for integrating customer master data , Materials from MDM 5.5 to ECC 6, As we are using standard content.
2. What idoc types needs to be created in ECC for these two scenarios ( customer, material /products).
3. Is there any way to see the field mappings easily in XI , as the MDM standard business content for XI used xslt mapping programs .
Could you please give helping hand with step by step procedure for customer, material integration in XI.
Help is rewarded and greatly appreciated.
Best Regards.
nag.Hello Nag,
1. I am not able to understand exactly what interfaces, mappings, integration scenarios from sap delivered MDM Business Content need to use for integrating customer master data , Materials from MDM 5.5 to ECC 6, As we are using standard content.
If you import Business Content of MDM 5.5. You should easily figure out that by looking at the Message Mapping for DEBMAS03 IDoc.
.2. What idoc types needs to be created in ECC for these two scenarios ( customer, material /products).
No need to create any Master IDocs in SAP system. You can find them with the name DEBMAS (For Customer) and MATMAS (Material).
3. Is there any way to see the field mappings easily in XI , as the MDM standard business content for XI used xslt mapping programs .
If you really want to know how the XSL Mapping is programmed. You can export the XSL from XI and open it in standard XML /XSL editor (say Stylus Studio ) to see how the output is programmed
Regards,
Ashwin M
Dont forget to mark helpful answers -
Demo - Extraction of Customer Master Data from SAP R/3 ECC6 to MDM5.5
Hello,
I am new to MDM . Would appreciate if someone can give a solution to the below request.
We are doing a demo project in our Company to extract all the master data related to SALES cycle. We are doing an extraction of Customer Master Data. Currently we have the unlicensed version of MDM and very soon we will get the licensed version.
We have the Customer Master Repository created in MDM Console. The IDOC type we are using is DEBMDM05.
Is there a easy way to map the fields of IDOC to the MDM Repository. Right now we are doing a manual process of comparing the IDOC fields and MDM Repo in an excel but this is tedious and time consuming.
Can anyone suggest an easier way to identify so that we know which fields match correctly.
Thanks
LeenaHi Leena,
First of all you have 2 options to generate IDOCs from SAP R/3 system
1.mdmgx>one IDoc per record
2.mdm_clnt_extr>for generating single IDoc having entire set of records.
Secondly,if you want to get the data mapped automatically,you should use standard maps provided by SAP(Business Content).
If at all you have created new fields then you should manually map those fields.
If any other queries pl ask
Reward points if found useful
Regards,
Pramod. -
Retrieving Dunning Clerk's name from Customer master data
Hi all,
I have to retrieve the dunning clerk's name in report ZRSD0001 (Customer Master Data Report).
There are standard methods to call the subroutine to retrieve the texts for some field like the bank statement text:
PERFORM TEXTFIELD_CALL(RSAQEXCE) USING KNB1 'KNB1' 'XAUSZ' TEXT_KNB1_XAUSZ.
This works perfectly. But it fails when I use the same method to retrieve the dunning clerk's name:
PERFORM TEXTFIELD_CALL(RSAQEXCE) USING KNB5 'KNB5' 'BUSAB' TEXT_KNB5_BUSAB.
So any other standard subroutine that I can use instead of using a sql statement myself ?
Thanks.Hi,
Why do you want to use a standard routine for this?? If you know the customer number(KUNNR), Company Code(BUKRS) and Dunning Area(MABER) You can get Dunning clerk(BUSAB) from KNB5 and using this BUSAB and BUKRS you can go to table T001S to get the SNAME which is Dunning Clerk's name.
Thanks,
Kavitha -
Query in customer master data upload ....?
Hi Guru's,
I am uploading the customer master data from presentaion server to customer tables using functional module SD_CUSTOMER_MAINTAIN_ALL.
while check the Function module separatly and it working properley and i am able to ctere customer...
and i am using the same function module in the program i am unable to upload ..could please check and let me know where i am doing mistake in the below program logis..and values also moving properly before calling function module..while calling the functinal module the controle comming out of the loop and program went to dump i am able to see the message in dump as like this(it may helpfull for resolve):
Name of function module...............: "SD_CUSTOMER_MAINTAIN_ALL"
Name of formal parameter..............: "O_KNA1"
Technical type of actual parameter....: "C"
Technical length of actual parameter..: 20 bytes
Technical type of formal parameter....: "u"
Technical length of formal parameter..: 3634 bytes
Name of formal parameter at caller....: "O_KNA1"
*& Report ZERP_CUSTOMER_CREATE_UPLOAD
REPORT zerp_customer_create_upload.
PARAMETERS:p_files TYPE string.
*DATA :xkunnr(10) LIKE kna1-kunnr. "unique KUNNR
DATA: gs_i_kna1 TYPE kna1,
gs_i_knb1 TYPE knb1,
gs_i_knvv TYPE knvv,
gs_return TYPE bapireturn1,
gs_i_bapiaddr1 TYPE bapiaddr1,
gt_t_xknvi TYPE STANDARD TABLE OF fknvi,
gwa_t_xknvi TYPE fknvi,
gt_t_xknbk TYPE STANDARD TABLE OF fknbk,
gwa_t_xknbk TYPE fknbk,
gt_t_yknvp TYPE STANDARD TABLE OF fknvp,
gwa_t_xknvp TYPE fknvp.
TYPES:BEGIN OF gty_itab1,
abc(305),
END OF gty_itab1.
DATA: gt_itab1 TYPE STANDARD TABLE OF gty_itab1,
gwa_itab1 TYPE gty_itab1.
TYPES :BEGIN OF gty_itab2,
ktokd(4), "customer account grp kna1
kunnr(10), "customer kna1
name1(35), "name1 kna1
sortl(10), "sort filed kna1
stras(35), "house number and adres kna1
pstlz(10), "postal code kna1
ort01(35), "city kna1
land1(3), "country kna1
telf1(16), "tele phone no kna1
telfx(31), "fax num kna1
kukla(2), "cust classificaion kna1
bukrs(4), "company code knb1
akont(10), "reconcilation acct knb1
vkorg(4), "sales org knvv
vtweg(2), "distr chan knvv
spart(2), "division knvv
zterm(4), "terms of payment knvv
bzirk(6), "sales district knvv
vkbur(4), "sales office knvv
vkgrp(3), "sales grp knvv
kdgrp(2), "cust grp knvv
waers(5), "currency knvv
konda(2), "price grp knvv
kalks(1), "pricing procedure assign knvv
lprio(2), "delivery plant knvv
vsbed(2), "shipping conditions knvv
vwerk(4), "delivering plant knvv
inco1(3), "inco1 knvv
inco2(28), "inco2 knvv
kkber(4), "cred control area knvv
ktgrd(2), "acc assgn grp knvv
taxkd(1), "tax classification 4 cust knvi
bankn(18), "bank account number knbk -
xkunnr(10),
END OF gty_itab2.
DATA: gt_itab2 TYPE STANDARD TABLE OF gty_itab2,
gwa_itab2 TYPE gty_itab2.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_files
filetype = 'ASC'
TABLES
data_tab = gt_itab1
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT gt_itab1 INTO gwa_itab1.
gwa_itab2 = gwa_itab1-abc(305).
APPEND gwa_itab2 TO gt_itab2.
ENDLOOP.
LOOP AT gt_itab2 INTO gwa_itab2.
SPLIT gwa_itab2 AT ',' INTO gwa_itab2-ktokd
gwa_itab2-kunnr
gwa_itab2-name1 gwa_itab2-sortl
gwa_itab2-stras gwa_itab2-pstlz
gwa_itab2-ort01 gwa_itab2-land1
gwa_itab2-telf1 gwa_itab2-telfx
gwa_itab2-kukla gwa_itab2-bukrs
gwa_itab2-akont gwa_itab2-vkorg
gwa_itab2-vtweg gwa_itab2-spart
gwa_itab2-zterm gwa_itab2-bzirk
gwa_itab2-vkbur gwa_itab2-vkgrp
gwa_itab2-kdgrp gwa_itab2-waers
gwa_itab2-konda gwa_itab2-kalks
gwa_itab2-lprio gwa_itab2-vsbed
gwa_itab2-vwerk gwa_itab2-inco1
gwa_itab2-inco2 gwa_itab2-kkber
gwa_itab2-ktgrd
gwa_itab2-taxkd
gwa_itab2-bankn.
*moving files values from ITAB2 work area to global structure related to FM.
gs_i_kna1-ktokd = gwa_itab2-ktokd.
gs_i_kna1-kunnr = gwa_itab2-kunnr.
gs_i_kna1-name1 = gwa_itab2-name1.
gs_i_kna1-sortl = gwa_itab2-sortl.
gs_i_kna1-stras = gwa_itab2-stras.
gs_i_kna1-pstlz = gwa_itab2-pstlz.
gs_i_kna1-ort01 = gwa_itab2-ort01.
gs_i_kna1-regio = gwa_itab2-land1.
gs_i_kna1-telf1 = gwa_itab2-telf1.
gs_i_kna1-telfx = gwa_itab2-telfx.
gs_i_kna1-kukla = gwa_itab2-kukla.
gs_i_knb1-bukrs = gwa_itab2-bukrs.
gs_i_knb1-akont = gwa_itab2-akont.
*I FOR GOT TO INCLUDE THE ZTERM VALUE IN EXCELL SHEET SO INCLUDED HARD CODE HERE
gs_i_knb1-zterm = '0001'.
gs_i_knvv-vkorg = gwa_itab2-vkorg.
gs_i_knvv-vtweg = gwa_itab2-vtweg.
gs_i_knvv-spart = gwa_itab2-spart.
gs_i_knvv-zterm = gwa_itab2-zterm.
gs_i_knvv-bzirk = gwa_itab2-bzirk.
gs_i_knvv-vkbur = gwa_itab2-vkbur.
gs_i_knvv-vkgrp = gwa_itab2-vkgrp.
gs_i_knvv-kdgrp = gwa_itab2-kdgrp.
gs_i_knvv-waers = gwa_itab2-waers.
gs_i_knvv-konda = gwa_itab2-konda.
gs_i_knvv-kalks = gwa_itab2-kalks.
gs_i_knvv-lprio = '02'. "gwa_itab2-lprio.
gs_i_knvv-vsbed = gwa_itab2-vsbed.
gs_i_knvv-vwerk = gwa_itab2-vwerk.
gs_i_knvv-inco1 = gwa_itab2-inco1.
gs_i_knvv-inco2 = gwa_itab2-inco2.
gs_i_knvv-kkber = gwa_itab2-kkber.
gs_i_knvv-ktgrd = gwa_itab2-ktgrd.
gwa_t_xknvi-tatyp = 'UTXJ'. "HARD CODE
gwa_t_xknvi-aland = 'US'. "HARD CODED
gwa_t_xknvi-kz = '0'. "HADR CODE
gwa_t_xknvi-taxkd = '0'. "gwa_itab2-taxkd.
APPEND gwa_t_xknvi TO gt_t_xknvi.
gwa_t_xknbk-bankn = gwa_itab2-bankn.
APPEND gwa_t_xknbk TO gt_t_xknbk.
gs_i_knb1-lockb = 'X'.
gs_i_knvv-kzazu = 'X'.
gs_i_knvv-kztlf = 'X'.
gs_i_knvv-perfk = 'X'.
gs_i_knvv-prfre = 'X'.
gs_i_kna1-spras = 'EN'.
CALL FUNCTION 'SD_CUSTOMER_MAINTAIN_ALL'
EXPORTING
i_kna1 = gs_i_kna1
i_knb1 = gs_i_knb1
i_knvv = gs_i_knvv
I_BAPIADDR1 =
I_BAPIADDR2 =
I_MAINTAIN_ADDRESS_BY_KNA1 = ' '
I_KNB1_REFERENCE = ' '
I_FORCE_EXTERNAL_NUMBER_RANGE = ' '
I_NO_BANK_MASTER_UPDATE = ' '
I_CUSTOMER_IS_CONSUMER = ' '
I_RAISE_NO_BTE = ' '
PI_POSTFLAG = ' '
PI_CAM_CHANGED = ' '
PI_ADD_ON_DATA =
I_FROM_CUSTOMERMASTER = ' '
IMPORTING
e_kunnr = xkunnr
o_kna1 = xkunnr
E_SD_CUST_1321_DONE =
TABLES
T_XKNAS =
t_xknbk = gt_t_xknbk
T_XKNB5 =
T_XKNEX =
T_XKNVA =
T_XKNVD =
t_xknvi = gt_t_xknvi
T_XKNVK =
T_XKNVL =
T_XKNVP =
T_XKNZA =
T_YKNAS =
T_YKNBK =
T_YKNB5 =
T_YKNEX =
T_YKNVA =
T_YKNVD =
T_YKNVI =
T_YKNVK =
T_YKNVL =
t_yknvp = gt_t_yknvp
T_YKNZA =
T_UPD_TXT =
EXCEPTIONS
client_error = 1
kna1_incomplete = 2
knb1_incomplete = 3
knb5_incomplete = 4
knvv_incomplete = 5
kunnr_not_unique = 6
sales_area_not_unique = 7
sales_area_not_valid = 8
insert_update_conflict = 9
number_assignment_error = 10
number_not_in_range = 11
number_range_not_extern = 12
number_range_not_intern = 13
account_group_not_valid = 14
parnr_invalid = 15
bank_address_invalid = 16
tax_data_not_valid = 17
no_authority = 18
company_code_not_unique = 19
dunning_data_not_valid = 20
knb1_reference_invalid = 21
cam_error = 22
OTHERS = 23.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF sy-subrc EQ 0.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
WRITE: / 'Error Message:', 'error in creation'.
ELSE.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE: / 'costomer', gwa_itab2-kunnr, 'created'.
ENDIF.
ENDLOOP.please let me know if my qestion is not clear...
and please cinfirm me ..that can i use the function module (SD_CUSTOMER_MAINTAIN_ALL) instead of BAPI (BAPI_CUSTOMER_CREATEFROMDATA1) for uploading customer master data.
please respond me ASAP.
thanks in advance and will give full points
thanks®ards
Srinivas. -
XD01 assertion failed error while updating customer master data
Hi Guys,
This is an error when I use transaction XD01 to create customers accounts, If you have any ideas do let me and we'll try it....
The error does not let an BDC or LSMW progress as well. There are also no recent sap notes on the same.
The error is as follow
ASSERTION_FAILED
Short text
The ASSERT condition was violated.
What happened?
In the running application program, the ASSERT statement recognized a
situation that should not have occurred.
The runtime error was triggered for one of these reasons:
- For the checkpoint group specified with the ASSERT statement, the
activation mode is set to "abort".
- Via a system variant, the activation mode is globally set to "abort"
for checkpoint groups in this system.
- The activation mode is set to "abort" on program level.
- The ASSERT statement is not assigned to any checkpoint group.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following checkpoint group was used: "No checkpoint group specified"
If in the ASSERT statement the addition FIELDS was used, you can find
the content of the first 8 specified fields in the following overview:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
I have a company code CG01 with sales organization CTS0 and I want to transfer or extend all the customer master data to another company code CG03 with the sales organization CTS0
The things that I have tried and not work
using xd01, fd15, fd16, fd01, does not wok and gives the error as above
The things that I have tried and it works
Change the sales organization from CTS0 to CTS1 I am able to post the customer master data, using any of the above tcodes and it does not give any error, however the client wants to sales organization to remain CTS0
So please give me any ideas as per your experience as this transfer of master data has to happen by Monday, else I'll be fried by my boss
My number is 9820029197
Will also keep you'll posted on any developments on this case,
Ronan Pinto>
> Firstly I am from SAP FI, so totally new to SAP SD
>
Then you are best person to explain the reason on why the same sales organization, can't be assigned to different company codes. When a sales is done through one sales organization, then will the profit/loss be accounted in different company codes. Is it legally allowed in the country, where your customer is doing business? How you are going to develop the balance sheet? Again being the FI person, you are best judge to provide the details to your customer and not a SD guy.
>
> 1) How did the system not give an error while putting the data inside CG02 with sales organisaton same as CST0 same as in company code CG01.
>
I dont see any other method than removing the assignments in the backend and uploading the data. You can consult a Basis person to find the change logs for the assignment table. In my opinion, removing the sales organization from a company code assignment just for loading a customer master data and then reassigning to original sales org is a crooked method and/or not a professional method.
>
> 2) Since I have limited experience of SD, If I have to convince my client about the use of CTS1 sales organisation or a unique sales organisation against his argument that it worked for company code CG02, how should I do it.......
>
As explained above, how the sales will be accounted in different company codes (even if the system allows to assign the same sales org to different company codes)?
I would recommend you to post this question in FI forum (after closing here) to check what are the legal implications for this scenario.
Regards,
Maybe you are looking for
-
Creating new graphics object from a existing one and sending it for print
Hello, i have a graphics object which is big in size, I am creating a new graphics object from the existing one as given below //map is a graphic object Graphic g1 = (Graphic)map.create(x,y,width,height); Graphic g2 = (Graphic)map.create(x,y,width1,h
-
Using a Separator in a Repeating Frame - Solved (Sort of...)
Hi Folks, I've got a report with a repeating frame going across it. I want to put a slash ('/') between the entries but NOT at the start or end so it looks like: Acceptance Test/Before Use Test/After Use Test Is this possible in Reports and, if so, h
-
No output Spool for my Z-program in Background
Hi All, The custom program which I developed giving the following Error message (The program getting executed successfully in Background but without the Output Spool ) : ' There is no list No. BT175 message diagnosis Spool No order has been found for
-
Is it possible ? Text Object
to programmatically reduce text inputed via xml to its bitmap primative ?
-
OEM12c agent after successfull installation with agent_port firewalled!
It is possible to install OEM 12c agent on a host where the agent_port has been firewalled. The agent installs successfully, but agent details aren't known to OMS. After unblocking the port agent and oms can communicate. The agent has no targets list