Customer Refund without VAT

Hi Friends,
we have a requirement, My Client want to refund Amount to Customer but with Out VAT.
For Example : Received : $1100 (1000+ 100 VA at 10%)
goods Delivered worth $600
Now we have to refund to customer $400.
But when ever i am trying to post $400 system automatically calculating VAT also which we don not want..
Can anybody help me on this..
Regards,
Satya

Friends Can anybody help me on this..
Edited by: Satyam on Mar 17, 2010 5:57 AM

Similar Messages

  • VA01: Creation of SD order with several material codes,with and without VAT

    hi guys,
    could someone tell me how to set up the system to not be able to create an SD orders with a mix of VAT condition?
    We don't want a sales order with an combination with and without VAT.
    Pls advise. Thanks.

    could someone tell me how to set up the system to not be able to create an SD orders with a mix of VAT condition?
    We don't want a sales order with an combination with and without VAT.
    H i
    1.The Vat ( Tax ) is applicable on basis of Customer and Mareial Tax classification.
    2. So as far as material is concerned , group all VAT applicable material in One Division
    Say in FMCG Company
    Divisions are Soaps , Skin Care , Shampoo etc
    Create Sub Divsions say for Eg Soaps-------Soaps 1( Taxable) & Soaps 2 .( Non Taxable ) and acordingly for other divisions
    And then Create Sales Areas accordingly.
    All this will need Reorganisation of your Sales Area
    Regards
    Rohit

  • Down payment without VAT

    Dear All,
    I have a question u2013 is it possible to post down payment without VAT posting?
    Currently our Vendor/Customer down payments produce VAT postings and when are cleared with final invoice. But according local requirements VAT posting must be done and VAT receivable can be reported only then final invoice is produced. There is not possible change tax code in down payment requests from SD or MM.
    Do you have any suggestions?
    Thanks in advance!

    Hi Ravindra
    If we remove the tax category, then the problem is when we create a down payment request and do billing where tax rate is applicable, Entry will not happen in Accounting.
    Only thing which I need is that at time of clearing the down payment request, putting tax code should not be mandatory.Just like when I am clearing a normal invoice (Inv. and incoming payment) no tax code is required.
    Rgds

  • How can i view and apply new custom patterns without going to preset manager? i had this facility but have now lost it

    how can i view and apply new custom patterns without going to preset manager? i had this facility but have now lost it.  i design patterns but am fairly new to photoshop. i used to be able to click on the drop down menu in patterns in the 'fill' box but cannot now do this.  have i inadvertently clicked on something to turn this facility off?  i now have to go to 'preset manager' and manually move my new design to the first box and click 'done' so that i can use it.

    Which version of photoshop are you using?
    After you define a custom pattern it should be added to the bottom of whatever patterns are already loaded.
    For example, if you define a custom pattern and then go to Edit>Fill>Pattern, the newly defined pattern should have been added to the existing loaded patterns.

  • Vendor down payment clearing without VAT posting.

    Hello SAP Gurus,
    I have following issue:
    Currently our Vendor down payments produce VAT postings when clearing with final invoice, which is correct.
    But we have some old vendor down payments which does not include VAT and needs to be cleared without any impact to VAT postings.
    User is using F-44 transaction and can not define any tax code for postings, system calculates it automatically.
    It is not possible to make VAT posting happen and then make reversal postings fot VAT accounts as well.I tried to check flag 'Posting without tax allowed' and uncheck 'Post automatically only' in account master data. And then make manual posting using that account via FB01 but system still requires tax code to be entered because Tax category in account master data is set to '<' I'nput Tax Account'. It is impossible to change Tax category let's say to ' * ' because account have balances on it.
    Could anyone advice how can I clear these downpayments without VAT posting?
    Thank you,

    I have tried to enter 0% input tax code, but still I'm not able to post document because of error msg:
    Tax entry not possible in this item
    Message no. FF724
    Diagnosis
    You can not enter a tax amount in this item since, due to the posting amount entered and the tax code, a total tax amount of zero has been calculated.
    This could either be due to the fact that the tax code has been defined with a value of 0%, or because the posting amount entered (that is, the tax base) is too small.
    Example:
    With a tax rate of 15%, a tax amount greater than zero will only be achieved with a base amount greater than 0.04. With values of 0.03 and less, it is therefore not possible to enter a tax amount.
    Procedure
    Only enter tax amounts in conjunction with tax codes for which a percentage rate not equal to zero has been defined. Make sure that in documents with several G/L account items you enter the total tax amount in an item with a sufficiently high posting amount.

  • MM Purchase order amount is without VAT amount in Cash management

    Hello colleagues!
    SAP says (note 009161) that PO amounts can be updated manually. But it is to much manual work. Is there some other solution for on line updating PO inclusive TVA?
    Please help!

    Thanks for your response. I have read 9859 note. Here is the explanation how integration of MM/SD and CM is realized.
    But the question is:
    PO data is updated in the CM. Data of PO positions appear in CM. If in PO position VAT deductible is selected amount without VAT appears in the CM. But the outflow cash planning we should do with Amount + VAT.
    The note 9861 says how this problem can be solved. But it is not good solution (much manual work). It should be updated correctly during PO saving. I do not know, my be somewhere in the Functional models (mentioned in 9859 note). But it is not possible without crushing standard system.

  • Customer Refunds.

    Hi All,
    I want to make Customer Refunds using F110 - Automatic Payment Run. But my problem is I have two company codes 1) ABC and 2) XYZ. ABC is only a selling entity and where as XYZ is a buying entity (Only Vendor Payments). So, for one of the customer in my ABC company have to make Customer Refund's. But whereas ABC co.code has no FBZP setup. Now I want to use XYZ Payment Bank Account for ABC because XYZ has already configured with FBZP.
    My question is what all the required customization activities required to make Intercompany payments for Automatic Payment Run.
    Do we require Cross-co.code clearing accounts ? Tell me what other actions have to be carried.
    Regards,
    Santosh.

    Hi Santosh,
    In FBZP, click on ALL COMPANY CODES tab
    Hope you should be having the settings already maintained for the company XYZ.
    Copy the same and create a new one for ABC.
    In the sending company code, it should be ABC and the paying company code should be XYZ
    I presume that you had maintained the settings for intercompany transactions at OBYA.
    Make sure the customer master/ credit memo document has the appropriate payment methods and payment terms.
    Execute F110 with the parameters as company code ABC and the relevant customer number.
    Regards,
    Mike

  • Customer refund paid using F110 for which check is not generated

    Hi,
    A customer refund is paid using the transaction F110. Payment document got generated and successfully posted. But the check number is not allotted for that document and checks are not printed. In the same payment run payment is made to the vendors for which checks got generated. I had checked customer master data and payment method settings and not able to figure out what is the exact reason.
    Please respond
    Regards
    Srinivas

    Hi,
    System thinks Check should be issued to vendors and collected from customer so check creation refer to the field LFA1-LIFNR, name written here is used for Check creation. Does customer name lie in to LFA1-LIFNR. This is the reason check issued for customer is not created. If you want then get the check printing form analyzed by an ABAPer to modify, if any.
    Regards,
    Chintan Joshi.

  • Vendor Turnover report without VAT

    Dear All,
    Is there any vendor turnover report exists which shows VAT not included.
    I checked S_ALR_87012093 but this without VAT. Is there any other report exists.
    Regards,
    Syed Hussain.

    Hi Syed,
    Check  if program J3RFKSLD - Vendor Turnover Balance Sheet (Russia)
    serves your purpose
    Regards
    Dheeraj

  • The payment method for me is it vat/tax included or without vat/tax .

    Hy you bypass to answer my question ! I ask you a simple question that " I am a non-Malaysian person &amp; within a few day I will go to Malaysia for official purpose &amp; I want to by a MacBook air Malaysia so what's the payment method for me is it vat/tax included or without vat/tax . I have no need to know how I use my credit card from you . Please answer my simple question .
    Best regards

    This has happened to me, did you fix it ?? If so how ???

  • Customer refund urgent,

    Hi Gurus
    Client has the requirement that they dont want to send their customer refunds if item is still at customers home.
    Please guide me how to configure this. thanks
    points will be awarded
    Nik
    Edited by: Nik Wallace on May 15, 2008 10:57 AM

    Hi,
       To use a different Bank Account -
        In the Customer Master , add the additional Bank details and make an entry for both Banks in the Field Bk.Typ.
        In the line item that is to be paid enter the value of the corresponding Bk.Typ in the field "Part.bank type"
    The default is to use the first listed bank account.
    Kind regards

  • Customer Refund - Customer Deposit

    Dear Experts,
    Here we have one scenario - We received 25000 INR Advance from Customer and Recorded Deposit, Customer used 20000 INR from Deposit, Now we have to refund 5000 INR to Customer what is the detail process we have to follow to do Customer Refund when Deposit is existed
    Please help me on this..
    Thanks in Advance..

    Hi,
    assuming that you are in version R12, you have to create a receivable activity for refund ....
    Now query the receipt which has 5000 INR as on-account or unapplied, apply it to the value called Refund ...
    and state the receivable activity ...
    Now system creates an invoice in payables for this customer automatically, which you can pay ...
    Regards,
    Ivruksha

  • Close of Customer Project without Settlement

    Hi All,
    Is it necessary to have Settlement rules for the Projects that are Subject to Result Analysis.
    We want to Close the Customer Project without settlment, Since the RA has been carried out for this project.
    When we are trying to Close the Project.Error Message.Still WIP Exists for this Project.
    Please suggest what is the best way to close the Project without carrying settlement Run.
    Regards,

    Try this,
    Create a settlement profile as "Not for Settlement", check the radio button for "Not for Settlement" and in the valid receivers maintain the option in the dropdown as Settlement optional or Settlement Not Required. Assign this Settlement profile to the project profile as well as maintain it in the settlement strategy for the respective Object.
    Once you are done with this, run your usual scenario and then try to close the project without running settlement. See what happens and revert with your findings.
    Regards,
    Gokul

  • Customer returns without billing reference

    Dear all,
    What is process for customer returns without billing reference document ?
    Jeyakanthan

    Hello,
    The best process for setting up the process of RETURN without referrence is as follows:
    1. Create a New Sales Order type ZRE with referrence to Order type RE. Please use the same pricing procedure as used for order. And for referrence field, use it as blank. Maintain Delivery type too.
    2. Create Delivery document in VL01N and also ensure to maintain the copying control of this to ensure smooth flowing of data.
    3. Create PGR process for the Delivery document to allow the return of goods in the inventory for Quality inspections and evalution.
    4. Create a Credit memo request which settles material to balance the value of the complaint delivery and atlast create Credit memo.
    Regards,
    Sarthak

  • Developing a custom AuthenticationProvider without idstore or credentials

    From the thread: How to integrate a SSO based in cookie with ADF Security
    ==========================================================
    At work they asked me to integrate a existing SSO based in cookie with the new ADF + Jdeveloper 11g + WLS. After google for days and read a lot of blogs and official documentation I've made a custom LoginModule. I made it very simple, it's just an "if" inside the login() function with the username, if the username is "john" I put to the Subject some Principals. My steps are:
    1- Create a new app based on "Fusion application" template.
    2- Make a new ADF Taskflow with only one view inside (the entry point of the taskflow). The jspx only contains a welcome message.
    3- Run the ADF Security wizard, all the steps with the default option, I don't change anything.
    4- Put some users and some roles in jazn-data.xml, and maping them to an application role. Then I grant permissions to the application role to view the previous task flow.
    At this point everything is ok. I run the taskflow and a basic login popup prompts me to write my username and password. Now I try to remove everything useless for me, like idstore, credentials, anonymous, etc. I only want a LoginModule that get the HttpRequest and passes it to an already done class that returns a true/false depending if the cookie is correct or not but, as I said before, my LoginModule is so simple now and even didn't try to do something more complicated than an if. The steps I try are:
    in jps-config.xml
    5- Remove idstore.xml and credentials.
    6- (loginmodule tab) Make a new login module, and put here my class. The class is in the ViewController project and JDeveloper find it navigating through the heriarchy, so I have visibility. I put REQUIRE flag, add all roles and debug mode.
    7- In the security context unmark the idstore.loginmodule and mark myLoginModule. Also delete the anonymous security context.
    All that I got until now is a 500 error (Internal server error - Authorization Exception). Sometimes (the close i've ever been to do something correct) the browser ask me for user/password but then only recognizes the users that already are in WLS (idstore from previous tests), but NOT the "john" user that is inside my custom LoginModule. Even more, if I run the WLS from JDeveloper 11g in debug mode, the runtime never stops at breakpoints inside my custom login module. It seems that my LoginModule isn't deployed or I made some error maping the roles.
    So, my questions are:
    - I'm in the good way? If I want an authentication based in cookie/httprequest I have to do a custom LoginModule? My goal is to do a re-usable code, and re-use the code that my co-workers have done. They have a class that with only the HttpRequest determines if a user is logged or not.
    - If I'm in the good way... how can I put my custom LoginModule in the WLS? I tried to search something in the Administration Panel (localhost:7101/console) but I did'nt find nothing.
    - In case I'd got the custom LoginModule working fine in WLS... how can I get a HttpRequest from a LoginModule and avoid the username/password dialog? I've to make a filter and pass it to the my LoginModule? If it's correct... how?
    I don't post my code because is so simple, it's based on DBTableLoginModule but without all the database access code.
    Thanks to all!
    P.D.: If this message isn't in the correct forum, I'm sorry. Feel free to move it.
    P.D.2: Sorry about my english, I'm spanish. I know i've to practise a lot :)
    ===========================================================
    After a week working in the problem I didn't solved it. I managed to write an AuthenticationProvider, a LoginModule and a Principal classes and I've put them into WLS, so "myAuthenticator" shows in the combo box ready to be used. But it doesn't work :( The server always shows me an exception (the last one tells me my class isn't a valid JAAS authenticator, but the MBean maker didn't complain). Is there any way to implement an Authenticator that doesn't use any credentials, idstore or callbacks? For example, can I implement an AuthenticatorProvider that grants me Principals only based in the hour of the day, or based in a boolean returned from a custom class, without any interaction with the user? It's really a must to have the user in the weblogic embedded LDAP or can I read the username from a cookie like in my case? Any advice will be very helpful, or some code would be awesome.
    Another question related: Why the ADF Security wizard doesn't deploy well with the embedded WLS? The wizard lets me create a custom LoginModule and add it with the "+" button, but it simply doesn't deploy. Will be fixed in future releases or I'm doing something wrong?
    Thanks to all.
    Riveck.

    So, since the ADF application is just using WLS Authentication, you're on the right path with the Authentication Provider.
    What you need though, is an IdentityAsserter. The identity asserter tells the container you want to authenticate, but you don't have a password, you have a token...in your case some HTTP Header foo=john.
    The good news is that there is already an identity asserter that you can use to start with...the SimpleSampleIdentityAsserter.
    [https://codesamples.samplecode.oracle.com/servlets/tracking?id=S224]
    This is the link to the samples.
    I think what you want to do, is configure your LoginModule to be called when the IdentityAsserter gets called...this can be done in the getAssertionModuleConfiguration() method. Return an AppConfigurationEntry that references your login module.
    Once you've got your identity asserter configured, what should happen is that when you access a protected page in ADF, JEE security will get triggered and the IdentityAsserter should get called, if you configure the login-method in web.xml to CLIENT_CERT.
    JB

Maybe you are looking for