Customise MCBE (TOTAL STOCK LEDGER)_For long  material description

Dear All,
I have to chage short text(material description) into  long  Material description.
I copped RMCB0300 (Tc-MCBE)  into ZRMCB0300
I run ZRMCB0300
  and  I clicked Switch drilldown  ->radio button are not coming(where i have to select material radio button).
Kindely suggest me solution.
With regard,
Jyoti prakash

hi,
In standard code material description is coming 40 charecter But requirement is 80
for material description.
If you go mm02  -basic data 1
Long material descr is availble 
I have to display in MCBE.
With regrads
jyoti prakash

Similar Messages

  • Long material description in PI-sheet (XSteps)

    Hello,
    I have read somewhere one can have long material descriptions in PI-sheet.
    I am not able to find this information as the solution wa described there as well.
    PPPI_MATERIAL_SHORT_TEXT as I am using now does not give full length.
    Please advice!
    Chistmas Greetings!
    Best regards,
    Tor

    Tor, please check here:
    http://help.sap.com/saphelp_47x200/helpdata/en/7e/f48b018aae4c4993c363c5e116440f/frameset.htm
    and just in case here:
    http://help.sap.com/saphelp_47x200/helpdata/en/89/a42870461e11d182b50000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/89/a439ac461e11d182b50000e829fbfe/frameset.htm

  • How to print total stock in smartform by material wise

    Dear Experts,
    I am trying to print total material stock which is issued and receipt during entered date in a smartform ,Here  I want to print totatl stock issued n receipt by material wise in seperate line .For that I fetch alldata and put into one internal table .In smartform I am using table for printing data.
    Edited by: BharatRathod on Mar 8, 2010 11:43 AM
    Edited by: BharatRathod on Mar 8, 2010 11:46 AM

    Hi,
    Try using the CALCULATIONS tab in the tables for printing the total stock in smartforms.
    Regards,
    Sharin.

  • Un-restricted total stock for Plant/Material/StLoc combo, Split-val & WBS

    Hi
    Users need  Un-restricted total stock for combination Plant/Material/StLoc combination ; we have MARD-LABST.
    Further, needs WBS & split -Valuation materials stock in the same report or SQVI. I tried to create SQVI, but it`s giving WBS stock as multiple times for SLocs.
    I`m using tables QBEW,MSPR,MCHB in the table join.
    Pls advise me suitable solution as Std SAP report or SQVI.
    Thanks,
    Ganesh

    Thanks for reply.
    But, I need unstricted stock for Mat/Plant/StLoc also to be displayed in the same report .i.e. MARD-LABST.
    The MBBS gives stock at Plant level for WBS.
    Can both be clubbed? Or need to get from separate reports?
    Rgds,
    Ganesh

  • Stock ledger group

    hi all,
    Can you please let me know on what basis Stock ledger group is assigned to material document.
    I can see the Stock ledger group assigned to amt doc  in the table -  l/BEV2/EDMSE.
    But from where it is assigned and on what basis ?
    Regards,
    Chandan

    Hi,
    During document selection, the system processes and evaluates each material document item. The system uses the following step to select the documents:
            The system assigns the material document items to the relevant tax type.
    ·        The system assigns the material document items to a stock ledger group.
    You can modify the assignment to a stock ledger group for specific customers. To do this you use reference stock ledger groups. You can also replace stock ledger groups (Customizing table Replace Stock Leger Groups).
    Basis for the assignment of stock ledger group to material document:
    Based on the data from the order/goods issue, purchase order/goods receipt, material, storage locations, and other movement data, the system assigns the material document to a stock ledger division u2013 and a stock ledger sub-division if necessary u2013 and to a stock ledger group. The previously determined ED movement category ascertains the analysis method.
    The system assigns reversal postings and original movements to the same stock ledger group. The quantity is simply entered with a different +/- sign than the original movement. For more clarity please follow below link. I hope this will resolve your issue. Thanking you.
    http://help.sap.com/saphelp_afs63/helpdata/ru/d8/a49b3cbe4ca00ee10000000a11405a/content.htm

  • Received qty valuated stock(0RECVALSTCK) and received qty total stock(0RECTOTSTCK) for 0IC_C03

    Hi Team,
    What is difference between received qty valuated stock and received qty total stock?
    According to me received qty total stock would be entire stock ie.received qty - block stock , received qty into consignment stock etc
    Please revert
    Regards

    Hi Phani,
    Thanks for the reply.
    Yes total stock would be consignment +quality inspection+blocked stock etc....
    But valuated would be something where there is costing or valuation ie we will have GL account hit.
    For eg Returnable material would be in total stock but not in valuated stock.
    Thanks

  • How to find total stock in a plant

    Hi.
    iam an abap developer i need to print a report which shows material and  total stock in plant.tell me filed name which display total stock
    Thank you,
    madhu

    Hi
    The plant stocks are stored in these tables
    MARD Storage Location Data for Material
    MCHB Batch Stocks
    MKOL Special Stocks from Vendor
    MSKA Sales Order Stock
    MSKU Special Stocks with Customer
    MSLB Special Stocks with Vendor
    MSPR Project Stock
    you can get the Stokc filed from the tables.
    Thanks & Regards
    Kishore

  • Inventory:Transaction in ECC for displaying Total Stock and Stock value

    Hello Experts,
    I have ran the report on BW side which gives me Inventory's Total Stock (ZTOTALST) & Stock Value(ZSTDPRICE) period wise.
    I want to reconsile data between ECC & BW for these two fields, please provide me trasactions for the same.
    I have material num & Plant for input.
    I want  to see the ZTOTALST & ZSTDPRICE value period wise in ECC.
    Thanks in Advance.
    Regards,
    Yash.

    Hi,
    Check in MB5B and MC.9 Tcodes in ECC.
    Note: select Valuated Stock in ECC and gibe Date Ranges also
    Thanks
    Reddy

  • MAP and Total stock in 1 report

    Hi,
    For one of the reporting requirement i need to show Moving average Price & Total stock in single report. MAP is saved in cube 0COPC_C04 and Stock in cube 0IC_C03.
    So i created a multiprovider on them. My report layout is bel;ow
    Material   Plant   Storage location MAP total stock
    Issue is that MAP is stored only at MAterial level and Plant level but not at storage location level.
    and stock is at all level.
    I am getting output like this:
    Material   Plant   Storage location MAP  total stock
    MAT1      PL1    #                          10     -
    MAT1      PL1     ST1                     -       20
    MAT1      PL1     ST1                     -       30
    User wants that MAP is same at different storage locations in a plant so MAP value should be repeated even if its same.
    MAT1   PL1    #        10  -
    MAT1   PL1     ST1   10    20
    MAT1   PL1     ST1   10    30
    How can i achieve the same....
    Thanks
    Dipika

    You could create a characteristic hierarchy with Plant as the parent node of storage location.
    Or create a structure in the query and define a cell restriction to keep the Plant MAP value against the Storage Location cells.

  • Stock Ledger Report

    HI,
    There is any Stock Ledger Report material Wise and Date Wise with Opening , issue, Receipt & Closing Qt available.
    With details Shown Below
    Material Code, Date, Material Document, Goods Movement Qty, Opening stock, receipt, Issues, Closing Stock.
    if useful, rewards points will be given.
    Regards
    Mani.

    Dear Vishal,
    Thank You for your response.
    But MB5B is Stock Statement and am looking for date wise, Material document wise, Opening, Receipt, Issues and Closing stock for the paricular material.
    i hope you can understand my requirement.
    Rgards
    Mani

  • Make to order and stock both in one material with consignment

    Hi Seniors
    FERT Material = XYZ which is being used for Make to Order and Make to stock both.
    In case of make to stock  scenario from GR u2013 101 and PGI made @ std price. At the time of Consignment 631 mvt. No accounting document is generated. As per my knowledge its fine. No issue.
    In case of Make to order scenario for above material.
    Q.1   At the time of goods receipt (101 Mvt) from production order,  accounting document is generated at the rate of Per unit target cost of production order and no variance shown on production order. Why not accounting document is created at Std price of Material?
    Q.2 At the the time of consignment an accounting document generated with following entry.
        Finished Goods Inventory      Dr
        Price difference                   Dr             
                        Finish Goods Inventory Cr
    Why accounting document is generated at the time of consignment in case of make to order scenario?  Pls confirm is this a sap standard behavour or anything wrong with me. As I told earlier that in case of make to stock when we make 631 mvt there is no accounting document generated.
    Note: My standard price is on the base of mix costing using two production versions.  Every time we create production order in each version.
    Regards
    Imdad

    Hi Imdad
    Q1: Why not accounting document is created at Std price of Material?
    Check your req class... There is a Field called "Valuation"... your valuation depends on whether you select M or A there... You can decide to valuate based on CK11N std cost estimate or based on Sales order cost estimate / Prod order cost estimate
    So, in a nut shell, you can configure the system to generate acc doc at CK11N Std cost also
    Q2. Why accounting document is generated at the time of consignment in case of make to order scenario?
    In my opinion, your MTO stock is maintained in Table EBEW.. Pls check that... WHen you do GR from Prod order, it resides in EBEW table..
    However, when you send it as a cons stock, the link to sales order is lost and your stock is no longer a MTO stock.. Hence, it is valuated at CK11N Std Cost.... If there is a diff between CK11N cost and GR Price, then PRD is generated... Thats why you are seeing PRD in your case
    BR, Ajay M

  • How to find Blocked Stock Value for a Material Division

    Hi Every Body,
    I have gone through the notes 589024,637927 to find out Blocked Stock value for a Particular Material at different plants . But I have to get Blocked Stock value at each Material Division . Kindly give some light on it to get it.
    The steps are same for finding the Consignment stock value and Transit Stock value. So kindly help me if any body has already worked on it.
    With rgds,
    Anil Kumar Sharma .P

    Hi Anil,
    well these notes work but they're prerequisites that have bothered me and unabled me to fulfill our requirement, for instance, having the material number in the drilldown and so on in order to perform the calculation during query execution.
    I believe there is not much more alternative if you still want to calculate valuations accurately at SLOC or any other stock indicator during query execution...
    I started from the basic fact that valuation of material underneath the plant/valuation area  (in my case 1 PLANT = 1 VALAREA).; precisely because all movements doens't carry all information as per the note explanation.
    So what we have done is to pull a cube with all Article/Sites MAP values; this can be done in several ways; MBEW/MBEWH are holding MAP values per fiscal periods; it has sufficient for us until now: our operations are asking to track MAP values more frequently.... So I am investigating how to work this out and have several alternatives:
    - MSEG has additional fields (available in the extract structures) like Total Stock Qty/Value PRIOR the posting. There is as well an indicator telling if the posting is relevant for the valuation (if it is going to affect the Qty/MAP or not). So it is possible to get the MAP after the posting for each material movement.
    - Create a change pointer on MBEW/MBEWH.
    - MKPF has two convenient fields (CPUDATE and CPUTIM) from which we could build our own delta extractor tracking MAP changes
    In BW the Idea  is to have a cube registering the Article/Plant valuation in time (non-cumulative) and then fulfill our queries via a multicube...
    hoping this will help you in solving your issue; I am of course following any topic in this matter so would appreciate your input....
    Olivier.

  • Quantity Total Stock is incorrect in the report

    0TOTALSTCK (Quantity Total Stock) is a non-cumulative key figure in the standard cube 0IC_C03 (Material Movements). The user is running a report for September month (01.09.2008 to 30.09.2008). At the end of the month i.e., 30.09.2008 the total stock is 0 in R/3, But in the BW reoprt it is showing as -19,000 which is incorrect.
    How can I check how the that value is calculated in the report? I can't see that key figure in the Infocube content preselection screen. In the definition of key figure,  it is calculated throgh Inflow and Outflow and mentioned arregation as Summation and Exception aggregation as Last Value. Is it correct? It should be linked with 0CALDAY for checking the stock day by day. How does it know?
    Any setting has to be done in the Report in order to get the correct values for the total stock qty?
    Please reply asap.

    Shiva,
    Inventory is calculated as a non cumulated KF which is aggregated based on stock receipts and stock outflows based on an opening stock marker. Think of this as something like a bank passbook where only debits and credits are entered and accordingly the balance is calculated. The Brought Forward line on your passbook is similar to the marker where once a page is completed the last available balance is updated.....
    only things which are not to be done in MM are :
    1. Compression without marker update - this corrupts the MM stock values.
    Also make sure you update the marker properly. The only solution to your case would be to do a full recon between the cube / R/3 and accordingly re-init / update the marker etc.
    Arun

  • Inventory - Quantity Total Stock

    Hello Experts,
    We recently loaded the data to 0IC_C03 using 2LIS_03_BF, 2LIS_03_UM. Quantity total stock, amounts are not matching between MCBA transaction and BI cube. Please let me know how can we proceed.
    Regards,
    Jyoti

    Hi,
    Step by Step Loading Data to Inventory Cube , Please verify your steps here,
    1. Ensure Cube contents are deleted 
    2. In R/3 go to T- code LBWG and delete contents of set-up table. Choose the correct application area 03 
    3. Ensure all other users except self and ALEREMOTE or BW RFC users are locked out. ( you need an outage time in R/3 when you are loading data from R/3) 
    4. Run T-Code MCNB to set - up stocks. DataSource 2LIS_03_BX, all materials including non-valuated stock 
    5. Load the set - up table with history data if needed. 
    - T-Code OLI1BW for Material Movements 
    - T-Code OLIZBW for Revaluations 
    6. From BW load initialisation for 2LIS_03_BX to set the initial stock. Compress this load with a marker update 
    7. Run an initialisation without data transfer from BW for DataSource 2LIS_03_BF and 2LIS_03_UM 
    8. Load the historical data as full updates for 2LIS_03_BF and 2LIS_03_UM into the cube. Compress these two loads without a marker update. 
    9. Make sure that, Job control has already been set - up in R/3. 
    Hope this helps
    Sukhi

  • MM Audits - What to report on to ensure total stock optimisation

    Evening,
    wondering if you guys can help out here. I have recently started a new position (Inventory Controller in Oil and Gas Industry) and i am only just beginning to understand the MM module in SAP. I have been involved in the RLM module in the past with other Oil and Gas companies. I also manage MRP and release reqs in ME55, follow the RFQ piece and ultimately, create and release PO's.
    What i was looking to do was ensure that the inventory that is held matches what SAP says. Stock checks are the obvious solution but, i believe other areas in SAP that auditors pick up on also need some close attention. I have been reporting on the following:
    Excess stock
    Review of Critical Spares
    PD/ND review (Ensuring that an MRP [PD] stock type is changed to ND when the materials have been consumed)
    Disposals
    Total Stock Value
    Stock Issues and Receipts.
    The question for you guys is: Is there anything else that can be reported to ensure total stock optimisation.
    Appreciate any tips that the Auditors are likely to pick up on too.
    P

    Hi,
    ABC analysis
    Special stocks (project, consignement ETC)
    Stock monitoring for subcontracting vendors
    Slow moving/Non moving
    Handling of rejected materials
    Returned material by customer
    Vendor returns
    Sachin

Maybe you are looking for