Customize Error Code

If there is an error in my subvi, in the error cluster, I would change the status to True and the source to my error message.  I usually don't change the error code at all.  What are the advantages of using error code?  If I have multiple drivers and they all have etheir own error code, won't there be a conflict?
Kudos and Accepted as Solution are welcome!

jyang72211 wrote:
How does the code givesextra enough if I put all the error information in the source entry of the error cluster?
Let say I have 3 seperate drivers, and each driver uses errro 5001, 5002, and 5003.  Won't that be a conflict? 
Usually the error message displays all the possible causes. In your case, if you get error 5001 it will list the 3 messages.
As an example: here two possible causes are listed for an error 5000
Ben64

Similar Messages

  • SAP Error code- How to find possible errors

    Hi,
    Please advise is there any way to identify the possible errors in data or in config using error codes displayed by the sap system. Any such procedure to trace the possible mistakes. please guide me.

    dear friend,
    one of the approaches as follows ( technical , not functional): on your error screen goto System-Status, double click on Program (screen)
    and in this ABAP editor you could try to find out the place with that particular error code/number.
    then to analyse the code (why this message is called).
    to use this method you need to be able understand abap.
    just in case, all messages exist in standard table T100, so you can search there by text error or message number.
    from functional point of view you could try to find out the place in config (spro) where you can customize that particular message , say , error, or warning, or just skip. But this doesn't work always! Some of system messages are not configurable.
    depends on module and etc..
    good luck!

  • Customize error-pages in portal

    Hello!
    How to customize error-pages (e.g. error 500, 404, 403...) in an application
    running within the portal (e.g. BEx Web Analyzer) ?
    Via the visual administrator it is possible to customize error-pages for
    a single applications (=> Server => Services => Web Container => choose an
    application => Btn. View => Tab. Pages => Tab. Error Pages)
    - but how to costomize all error-pages for all applications running within the portal ?
    Greetings
    Frank Ruggaber

    Hi madhvika,
    One way you can modify the standard error msgs is using Custom Error msgs which you can define in the web.xml deployment descriptor of your application.
    (/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-infweb.xml):
    Check [custom error pages|http://help.sap.com/saphelp_nw04/helpdata/en/9a/e74d426332bd30e10000000a155106/frameset.htm
    you can use the first method - Error msgs mapped to error codes.You can create your own static html and write your own customised error msg in that instead of the usual 404 error : Resource not found.
    I think the standard error msgs are not stored in portal...not sure though.I think they are defined in the J2EE engine as parameters.Have to chek on that once.
    Or probably if u have KM installed then these error msgs can be directed to a file stored in KM and the respective msg can be displayed.....again storing as static html.
    Reward points if useful.
    Cheers,
    Abhishek
    P.S: How are you?

  • Custom Odbc error code

    Hi All,
    I want to know if there is any way where we can customize the odbc error code whenever a error is displayed in presentation services.
    Thanks in Advance!!!

    I have lloked into custommessages.xml but i figured out that we can change or custom the message but not sure error code asscociated the message.
    please let me know about this

  • The Network Adapter could not establish the connection Error Code: 17002

    Hi,
    after upgrade b41 to b49, I get error from subject, without any changes in my app.
    This occurs only on Oracle AS, on standalone OC4J application works OK.
    I use connection defined in persistence.xml:
    <non-jta-data-source>jdbc/MyAppDS</non-jta-data-source>
    and can successfully test this connection in Enterprise manager.
    Also, I tried all tricks mentioned here:
    http://www.websina.com/bugzero/kb/oracle-connection.html
    I know, that this is JDBC layer problem, but I am sure, that my connection is OK, and
    after downgrade to b48 this problem fall away.
    Bye,
    Lumir

    Could you provide the full stack trace to the exception.Exception [TOPLINK-4002] (Oracle TopLink Essentials - 2.0 (Build b50-beta3 (06/07/2007))): oracle.toplink.essentials.exceptions.DatabaseException
    Internal Exception: java.sql.SQLException: Výjimka vstupu/výstupu: The Network Adapter could not establish the connection
    Error Code: 17002
         at oracle.toplink.essentials.exceptions.DatabaseException.sqlException(DatabaseException.java:305)
         at oracle.toplink.essentials.jndi.JNDIConnector.connect(JNDIConnector.java:150)
         at oracle.toplink.essentials.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:185)
         at oracle.toplink.essentials.internal.databaseaccess.DatasourceAccessor.connect(DatasourceAccessor.java:233)
         at oracle.toplink.essentials.internal.databaseaccess.DatabaseAccessor.connect(DatabaseAccessor.java:242)
         at oracle.toplink.essentials.internal.databaseaccess.DatasourceAccessor.connect(DatasourceAccessor.java:309)
         at oracle.toplink.essentials.threetier.ConnectionPool.buildConnection(ConnectionPool.java:117)
         at oracle.toplink.essentials.threetier.ExternalConnectionPool.startUp(ExternalConnectionPool.java:135)
         at oracle.toplink.essentials.threetier.ServerSession.connect(ServerSession.java:458)
         at oracle.toplink.essentials.internal.sessions.DatabaseSessionImpl.login(DatabaseSessionImpl.java:586)
         at oracle.toplink.essentials.ejb.cmp3.EntityManagerFactoryProvider.login(EntityManagerFactoryProvider.java:235)
         at oracle.toplink.essentials.internal.ejb.cmp3.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:227)
         at oracle.toplink.essentials.internal.ejb.cmp3.base.EntityManagerFactoryImpl.getServerSession(EntityManagerFactoryImpl.java:93)
         at oracle.toplink.essentials.internal.ejb.cmp3.base.EntityManagerFactoryImpl.createEntityManagerImpl(EntityManagerFactoryImpl.java:126)
         at oracle.toplink.essentials.internal.ejb.cmp3.base.EntityManagerFactoryImpl.createEntityManagerImpl(EntityManagerFactoryImpl.java:120)
         at oracle.toplink.essentials.internal.ejb.cmp3.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:91)
         at idea.isko.db.service.impl.AbstractServiceImpl.createEntityManager(AbstractServiceImpl.java:77)
    How have you deployed your application exactly, i.e. what is the structure of your ear. I use standard war for deploy.
    Is the DataSource defined in your server, or your application? Defined on server, test on Enterprise manager passed successfully.
    Try using a direct JDBC connection in your persistence.xml (driver/url), does this work?Not work, this same exception.
    How do you access your entity manager? (managed, non-managed, jta, non-jta?)non-managed, non-jta.
    FYI, I make downgrade to build 48, and this works - it is last version without this problem.
    I added some tracing code to my SessionCustomizer:customize():
    DatabaseLogin login = session.getLogin();
    logger.fine("URL is :" + login.getDatabaseURL());
    With build 48, connection defined using toplink.jdbc.* , the output is:
    07/06/11 10:04:36.218 10.1.3.1.0 Started
    07/06/11 10:04:43.593 MyApp: 10.1.3.1.0 Started
    07/06/11 10:05:18.578 MyApp: FINE - Customizing session - directProperties
    07/06/11 10:05:18.578 MyApp: FINE - URL is :jdbc:oracle:thin:@(DESCRIPTION ... (cut)
    07/06/11 10:07:16.875 MyApp: 10.1.3.1.0 Stopped
    And after upgrade to build 50:
    07/06/11 10:10:12.703 10.1.3.1.0 Started
    07/06/11 10:10:30.953 MyApp: 10.1.3.1.0 Started
    07/06/11 10:10:52.281 MyApp: FINE - Customizing session - directProperties
    07/06/11 10:10:52.296 MyApp: FINER - THROW
    Local Exception Stack:
    Exception [TOPLINK-28014] (Oracle TopLink Essentials - 2.0 (Build b50-beta3 (06/07/2007))): oracle.toplink.essentials.exceptions.EntityManagerSetupException
    Exception Description: Exception was thrown while processing property [toplink.session.customizer] with value [idea.jpa.util.ToplinkSessionCustomizer].
    Internal Exception: Exception [TOPLINK-7058] (Oracle TopLink Essentials - 2.0 (Build b50-beta3 (06/07/2007))): oracle.toplink.essentials.exceptions.ValidationException
    Exception Description: Invalid Connector [JNDIConnectordatasource name=>null] (must be of type DefaultConnector).
    It seems to me, that Login is not properly initialized when app. run in Oracle AS.
    Bye,
    Lumir

  • Error Code 2STF/8/3:ATA-100 ata-6-Master

    Hello,
    I've been working with my ailing eMac G4 for a couple weeks now. Nothing is working. When I run Quick Test on the Apple Hardware Test (after booting off the Install and Restore Disk) I get an "everything is fine" message. Then, when I run the extended test, I get the following error code: 2STF/8/3:ATA-100 ata-6-Master.
    Does anyone know what this means?
    Thanks.

    steve:
    Supposing that you HDD is sound, and I am a bit unsure, try reformatting and installing as per step-by-step directions here:
    Formatting, Partitioning Zeroing a Hard Disk Drive
    Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
    Boot from the install CD holding down the "C" key.
    Select language
    Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
    Select your HDD (manufacturer ID) in left side bar.
    Select Partition tab in main panel. (You are about to create a single partition volume.)
    Select number of partition in pull-down menu above Volume diagram.
    (Note 1: One partition is normally preferable for an internal HDD.)
    Type in name in Name field (usually Macintosh HD)
    Select Volume Format as Mac OS Extended (Journaled)
    Click Partition button at bottom of panel.
    Select Erase tab
    Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
    Check to be sure your Volume Name and Volume Format are correct.
    Optional: Select on Security Options button (Tiger) Options button (Panther & earlier).
    Select Zero all data. (This process will map out bad blocks on your HDD. However, it could take several hours. If you want a quicker method, don't go to Security Options and just click the Erase button.)
    Click OK.
    Click Erase button
    Quit Disk Utility.
    Open installer and begin installation process.
    Installation Process
    Choose to Customize and deselect Foreign Language Translations and Additional Printer drivers.
    Check box to install X11 (Tiger) BSD Subsystems (Panther & earlier).
    Proceed with installation.
    After installation computer will restart for setup.
    After setup, reboot computer.
    Go to Applications > Utilities > Disk Utility.
    Select your HDD (manufacturer ID) in left side bar.
    Select First Aid in main panel.
    Click Repair Disk Permissions.
    Connect to Internet.
    Download and install 10.3.9 Combo Update
    Computer will restart after updates.
    Go to Applications > Utilities > Disk Utility.
    Select your HDD (manufacturer ID) in left side bar.
    Select First Aid in main panel.
    Click Repair Disk Permissions.
    Please let me know how this goes for you.
    Good luck.
    cornelius

  • Cannot delete file from external hard drive (error code 36) in Finder, but Terminal is ok

    I have a relatively new Macbook Pro Retina 15" and have a Western Digital 1 TB Passport.  I've been using the passport for about a year now without any problems on older Macbooks in my house.  I used to be able to read and write to this drive no problem.  I am using the Paragon NTFS for Mac software in order to read and write to the NTFS drive.  When I navigate through the drive in Finder, if I try to create a new folder, I do not have a problem.  If I try to delete that folder I just created, I get this error:
    The Finder can’t complete the operation because some data in “untitled folder” can’t be read or written.
    (Error code -36)
    The folder has nothing in it whatsoever.  I just created it.  But if I go to Terminal and I run
    rm -rf "untitled folder"
    This works fine.  Why is Terminal acting different than Finder?  This does not happen on my other Macbooks.  Thanks in advance.

    Thanx for such qucik reply!!! The pages were great, it had an answer for my problem, but unfortunately it also involved me dealing with it only on the MacIntosh HD itself, not on mounted external drive I suppose... So it didn't work they say that there is an icon in the left corner indicating locked folder - I don't see any icon on it. It says you can untick the box to unlock the folder - there is no tick to be unticked. Finally, they say that if I don't have permition or rights I cannot delete it. But how do i change permittion which already says that i can read and write in it? So everything appears to be normal only I cannot delete it. there is not even any warnig telling me I don't have enough rights, it just requires the password and after me typing it in it makes the sound of scraping paper but does nothing more. I aslo had some problems with emptying Trash after being seemingly succesful with one file and had got so far to have them appear in the Trash (no clue how this one actully got there though..) I followd the advice and emptied the Trash with Terminal. The Folder is still there but it shows 0 Kb... So far so good BUT: It is still on the external drive, so I obviously only managed to copy it into the Trash!!! Phew, innit a bit too tight to poor owners, this macbook?? I want my rights back!

  • Report generation failed----​error code:-1720​5; Access Denied.

    Hi, All
        i have a trouble about report generation.it seems the error happened at the "write UUT report"--this step is teststand report generation'DLL.
        detail:
        An error occurred calling 'Save' in 'Report' of 'NI TestStand 2010 SP1 API'
    Access Denied.. Error writing to file 'D:\program\seq\xxx.xml'.
    The file might be open in another application. If file access is intermittently denied, you should try disabling the Microsoft FindFast utility. 
        error code:-17205; Access Denied.
        locationtep 'Write UUT Report' of sequence 'Single Pass' in 'SequentialModel.Seq'
        How to fix it?
        Thanks a lot.
    BR

    Hm, it looks like the file might be open in another application. If you see that file accesss is intermittently denied, you should try disabling the Microsoft FindFast utility.
    CTA, CLA, MTFBWY

  • There was a recent upadate on my PC, however it does not work. A error code comes up which says, min version is not compatible with max version. And I caanot open my browser. Please help.

    I do a system restore which allows me to open my browser. Without this I cannot open my browser - the error code comes up every time.

    Do a clean (re)install
    * Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Don't remove personal data when uninstalling.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    From https://support.mozilla.com/en-US/questions/764376

  • My ipod touch is not list as a device on itunes.  When I tried do update itunes, I get a ox8007054f error code and the update will not complete.

    My ipod touch is not listed as a device when connected to my computer.  As suggested I attempted to download the latest of itunes.  I got an
    ox8007054f error code and the down load will not complete.  I have also tried to restore my computer to an earlier setting, but it will
    not accept the change.

    Have you looked at this completed previos discussion. It discusses 0x8007054F.
    Re: Error message when trying to install iTunes

  • Capturing oracle error codes into a variable

    Hi
    Can someone show me how it is possible to save an Oracle defined error code into a variable? What I am trying to do is when a stored procedure fails an Oracle error is raised, such as ORA-xxxx, then pass this code into variable to be saved into a log.
    How do I achieve this?

    user633278 wrote:
    How do I achieve this?Function SQLCODE in PL/SQL exception handler returns error code. SQLERRM returns message:
    SQL> declare
      2      x number;
      3  begin
      4      x := 1/0;
      5    exception
      6      when others
      7        then
      8          dbms_output.put_line('Error code: ' || SQLCODE);
      9          dbms_output.put_line('Error message: ' || SQLERRM);
    10  end;
    11  /
    Error code: -1476
    Error message: ORA-01476: divisor is equal to zero
    PL/SQL procedure successfully completed.
    SQL> SY.

  • Error Code:942 While Scheduling a report in BI Publisher

    Hi All,
    I am trying to schedule one report in BI Publisher.
    After Clicking Submit Button while scheduling report,i get following error:
    Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.0.0) (Build 080319)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: ORA-00942: table or view does not exist Error Code: 942 Call: UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + 50 WHERE SEQ_NAME = 'JOB_ID_SEQ' Query: DataModifyQuery()
    Kindly Help me in resolving this issue
    Regards
    Amrita Singh

    i know the issue,i can give quick fix, but in-order to make sure you don't get another glitch like this.
    I would recommend, you to install the scheduler in another schema or another db.
    Re-installing the scheduler schema tables will fix this.

  • ORA-00600: internal error code, arguments: [ktsircinfo_num1]

    While taking export of a table received EXP error and while dropping/selecting the same gor ora-600 errors.
    . . exporting table TEST4
    EXP-00003: no storage definition found for segment(29, 371385)
    SQL >Drop table test4 cascade;
    ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
    sql> Desc test4;
    ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
    I dont want to log TAR with oracle right now... I tried dropping and recreating Undo tablespace but still did not help much . Database version is 9204

    hi
    read metalink ID - 153788.1
    CHeers

  • Transport control program tp ended with error code 0212

    Hi all,
    I have created a two system landscape of development & production server. But while I am releasing any request from develpoment server a error is showing: " Transport control program tp ended with error code 0212 Errors: could not access file as supposed (see dev_tp or S".I have chosen development server as domain controller. TMS alert viewer error message also contains the following information------>command: TMS_MGR_READ_TRANSPORT_QUEUE
                                                                           service: transport service
                                                                           start : online
                                                                           Function: TMS_TP_SHOW_BUFFER
                                                                           message: TP_REPORTED_ERROR
    In import monitor it's showing : "tp finished: could not access file as supposed (see dev_tp or SLOG1113.K"
    Can you tell me how to resolve this issue?

    dev_tp contains:    
    This is R3trans.exe version 6.14 (release 700 - 09.04.10 - 11:26:00).
    unicode enabled version
    usage: R3trans.exe [<options>] <control_file>
    The control_file describes what R3trans has to do.
    The following options are possible:
    -c f1 f2 : Copy file f1 to f2 with character set conversion.
    -d       : DB connect. Test if SAP database is available.
    -i file  : Import from file without using a control file.
    -l file  : List the contents of file to the log file.
    -m file  : List the contents of file to allow tp to create a cofile.
    -t       : Test. All database changes are rolled back.
    -t4      : Trace level 4. Switch on developer trace.
    -u <int> : Unconditional modes. See below.
    -v       : Verbose. Write more details to the log file.
    -w file  : Log file. The default log file is 'trans.log'.
    -x       : DB connect without access on any SAP table.
    R3trans.exe finished (0012).
    & the slog file is not there in the trans/log directory

  • While activating a request in DSO getting error code 10

    While activating a request in DSO getting error code 10
    Hi All,
    I am trying to load data into Billing: Condition Data (0SD_O06) using 2LIS_13_VDKON. First while loading data I am getting error
    Record 8778 :InfoObject SOLD_TO does not contain alpa-conforming value 100000 which I changed manually in PSA maintenence and tried to load data again and now I am getting an error (Error 10 in the update) ID:RSAR No119.
    I have checked the formula in Transformation and it works fine. Still I am not able to load data.
    Please help.
    Thanks and regards
    Vishal Pardeshi

    Check the log for the request from the manage screen of the DSO, it will be there next to the monitor button.
    Otherwise you can check the error from the monitor screen of the request in Details tab.
    Veerendra.

Maybe you are looking for