SAP Error code- How to find possible errors

Hi,
Please advise is there any way to identify the possible errors in data or in config using error codes displayed by the sap system. Any such procedure to trace the possible mistakes. please guide me.

dear friend,
one of the approaches as follows ( technical , not functional): on your error screen goto System-Status, double click on Program (screen)
and in this ABAP editor you could try to find out the place with that particular error code/number.
then to analyse the code (why this message is called).
to use this method you need to be able understand abap.
just in case, all messages exist in standard table T100, so you can search there by text error or message number.
from functional point of view you could try to find out the place in config (spro) where you can customize that particular message , say , error, or warning, or just skip. But this doesn't work always! Some of system messages are not configurable.
depends on module and etc..
good luck!

Similar Messages

  • Error code: 2147778144 Cannot find the QE property.

    I have been working to get Coldfusion 8 and Crystal Enterprise 10 to work together.  The following were two approaches I knew of to try:
    1) using Crystal "unmanaged URL reporting":
    a href="AOC_Summary.rpt?prompt0=#variables.Record_Month#&prompt1=#variables.Fiscal_Year#&user0=userid&password0=pswdn">AOC SUMMARY</a>
    2) using  the Coldfusion <cfreport> tag:
    <cfreport report = "AOC_Summary.rpt"  
    dataSource = "#variables.dsn#"  
    username = "userid" 
    password = "pswd">
    {AB145_AMTS.REC_MONTH} = 5 and
    {AB145_AMTS.FISCAL_YEAR} = 8
    </cfreport>
    I got the CFREPORT tag to work but was disappointed to find that it only rendered the report in HTML.  The reports we have been producing with our current configuration of CF4.5 & CR 8.5 can be saved as PDF's.  So I abandoned the Coldfusion <cfreport> tag to see if I could get the Crystal "unmanaged URL reporting" to work.  This included me trying to find any documentation anywhere to guide me along with going into Crystal Admin and 'experimenting' to see if there was anything I needed to do there to make the unmanaged URL reporting work.
    Management is now telling me that producing the report in HTML is acceptable.  I am now trying to set up a demo for management.  When I went back into my CF code and uncommented the work I had done with the CFREPORT tag (which had been working at the time I commented it out), I receive the following error code.
    CrystalReport Integration Exception.
    Error code: 2147778144 Cannot find the QE property.
    Error source: Crystal Reports ActiveX Designer 
    I have tried searching the SAP site to find more information on this error message to no avail.   Any guidance would be greatly appreciated.
    Regards,
    :)mary
    Edited by: Mary Fowler on Aug 21, 2008 7:21 PM

    I found my mistake.  Used wrong .rpt file.  (head drooped, tail between the legs)
    Thank you for being here!
    :)mary

  • Error Code -36 in Finder

    Ok, first of all the following issue is NOT fixed by doing dot_clean <path name> in Terminal, as suggested by Googling. I've had that issue before with FAT memory sticks, and it works, but it does NOT solve the following issue (that issue was solved in 10.6.3 anyway, and my problem below is happening in 10.6.3 and 10.6.4).
    Basically I have 17 mkv video files in my downloads folder, all 4.7GB each. I tried to move them to my external HD (connected to another Mac) over the network, as I always do when putting media on my Mac Mini, and it failed on the first one at 2.08GB with Error Code -36, full error:
    "The Finder can’t complete the operation because some data in “filename.mkv” can’t be read or written.
    (Error code -36)"
    The same thing happened with files 4 and 9 (not at 2.08GB, but at some other point), but 2, 3, etc and the rest all moved just fine.
    I tried copying them instead of moving them, exact same problem.
    I tried using Terminal to copy then using the cp command, same problem (wasn't Error Code -36, but "Input/Output Error", but according to Google it's the same thing)
    I tried putting them into a sub folder within Downloads and using cp -r to copy the whole folder, same problem.
    I tried connecting the external USB drive (it's Mac OS Journaled by the way) directly to my MacBook Pro and copying them, same problem.
    I can't even copy/paste them where they are (i.e. if I just select the first one and do Cmd-C, Cmd-V to make a copy in the source folder), I get the exact same problem.
    I even booted into Windows 7 through Parallels and tried using Windows to copy them to the external HD, same problem (again, not Error Code -36, but some generic I/O error).
    What I CAN seem to be able to do without error is move them around my MacBook Pro hard drive (not copy, but move).
    Any ideas?
    Thanks

    If you are trying to write to a FAT formatted volume then the error is produced because you are trying to transfer files that exceed the 4 GB file limit of the FAT32 filesystem.
    Otherwise the problem may be due to actual file corruption, filenames that are too long, or filenames with illegal characters. If you are trying to transfer a folder containing the files, then you should try copying each file individually which sometimes works.
    Search the forums for other discussions of the problem as well as additional Google searching. There's a wealth of discussion on the topic. There are many different causes of the error as well as solutions.
    Also see this article which is tangentially related: Troubleshooting iDisk connection issues.
    Message was edited by: Kappy
    Message was edited by: Kappy

  • How to find disk error.

    How to find disk error, i tried iostat -En , /var/adm/messages,and prtdiag -v . is there anyother way to find the hardware error.

    If theres nothing in /var/adm/messages and iostat -En isnt showing a problem.
    What makes you think there is a disk error?

  • How to find flatfile errors while uploading data

    hi all,
    i hava a question...  when i am uploading large amount of data (ex:1 lac records) in that 100 records are error records .. how to find the error records in flatfile before uploading.
    regards shree.

    Hi,
    The only way to find out errors is to open the file from abap read through each record and validate it.
    However , my approach would be to read through each record, validate it, if valid process it otherwise collect it in another auxilary internal table and then in the end log the errors for later processing.
    regards,
    Advait

  • I am trying to update PR and PS and get error code A12E3. cannot find solution.

    I am trying to update PR and PS and get error code A12E3. cannot find solution.

    " The feature you are trying to use is on a network resource that is unavailable. I tried to uninstall iTunes, and it would not uninstall. It gave me the following message " The path C:\documents and settings\network service\local settings\application data\apple\apple software update\iTunes.msi cannot be found.
    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Error code 3150 - Cannot find output destination. Need help to resolve

    I just installed a new router running DHCP and now I'm unable to reach my printer from all computers. The error code says "Cannot find output destination. Check the printer power connection, make sure the printer is switched on, and then try again.: -3150
    The printer is obviously powered on and connected to the LAN. There is an apparent IP address problem, however, I can ping the IP that seems to be loaded in the printer.
    I'm using Mac computers and I seem to have recurring IP issues with this printer.
    Thanks for any help.

    i am having the same issue as well.

  • Oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters

    Dear Guru's,
    I am not able to solve the above issue for last couple of days.
    I am newbie to the webservice
    My Issue...
    I am using Jdeveloper 11.1.2.4.0 Release 2
    1. Using Jdev I built one small Web Service with two methods.
            While testing the Webservice...
                   I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
    2. I created another application to consume the web service i created.
                   1. I added the webservice SOAP and added the method.
                   2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
    3. While executing the created jsf page I received the error message as below
    "oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
    Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
    Can anybody help to solve this issue.
    Thanks and Regards,
    Durai S E

    Dear Guru's,
    I am not able to solve the above issue for last couple of days.
    I am newbie to the webservice
    My Issue...
    I am using Jdeveloper 11.1.2.4.0 Release 2
    1. Using Jdev I built one small Web Service with two methods.
            While testing the Webservice...
                   I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
    2. I created another application to consume the web service i created.
                   1. I added the webservice SOAP and added the method.
                   2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
    3. While executing the created jsf page I received the error message as below
    "oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
    Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
    Can anybody help to solve this issue.
    Thanks and Regards,
    Durai S E

  • We have only GL SAP document number. how to find Vendor clearing document by these GL Document number please suggest and suggest Tcode.

    We have only GL SAP document number. how to find Vendor clearing document by these GL Document number please suggest and suggest Tcode.

    Hi Mahesh,
    To display a document, proceed as follows:
    Tcode : FBL1N (Vendor Line Item Display)
    1-Select option's.
    2- List
    Regard's.
    Cem Ates

  • Oracle Error code: 1116, message: ORA-01116: error in opening database file

    Hi ,
    Please advise on this error message
    Oracle Error code: 1116, message: ORA-01116: error in opening database file 202 ORA-01110: data file 202: '/u02/app/oracle/oradata/ubidev12/dbf/temp02.dbf'
    All these while, the dashboard working well in my local computer application with server database.
    Just discovered this error when I refresh the data.
    Kindly advise.
    Thanks,
    Kim Yoke

    the more detail error is
    Oracle Error code: 1116, message: ORA-01116: error in opening database file 203 ORA-01110: data file 203: '/u02/app/oracle/oradata/ubidev12/dbf/temp03.dbf' ORA-27041: unable to open file SVR4 Error: 2: No such file or directory Additional information

  • I bought the APP Sasol Birds. 146MB of the 147,5MB downloaded without any problem. The download stopped and first the error code 3259 and later the error code 8012 appeared. Can someone help? I want the download to be completed. Thank you. Pieter Strobos

    I bought the APP Sasol Birds. 146MB of the 147,5MB downloaded without any problem. The download stopped and first the error code 3259 and later the error code 8012 appeared. Can someone help? I want the download to be completed. Thank you. Pieter Strobos

    Maybe your firewall or security software are preventing the download from finishing. You could try disabling them until you finish the download

  • Is there a range of error codes reserved for user defined error codes?

    I would like to create my own error codes for a CVI dll but I want to make sure I don't use error codes already defined for something else. Is there a range reserved for such use?
    Samee thing for warnings (errorcode > 0)
    Thanks

    I have never found a positive mention of a "safe" range of error codes available for user-defined error conditions, but I can suggest you some source of informations.
    First of all, every library has its specific list of error codes, usually listed in the relative include file. All these error codes are listed in the online help too (search for "error codes" in the index tab of the help).
    Second, GetGeneralErrorString () is a function that can be used to trap errors of the following libraries with a unique error function:
    User Interface Library
    Easy I/O instrument driver
    Toolbox instrument driver
    ActiveX Library
    DIAdem Connectivity Library
    .NET Library
    DataSocket instrument driver
    Network Variable Library
    Real-Time Utility Library
    TDM Streaming Library
    UDP Support Library
    This means that the error codes from this libraries do not overlap, so you could derive from its code some ranges not used by these libraries.
    Nevertheless, there is not a single function for error trapping: every library has its proper list of error codes and a function to decode them in human readable form, andthere is no guarantee that these ranges does not overlap. It's up to you to trap errors from every function in the proper way.
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • Rerouting on error code Cause i = 0x80FF - Interworking error; unspecified

    Hi,
    I have a problem with my operator. It has a regional crash ant I received this error code
    Cause i = 0x80FF - Interworking error; unspecified
    I have BRI backup with an other operator but the call manager does not reroute the call.
    I try to put the BRI in the same route group or in an another route group but in the same rout list.
    *Feb 25 09:20:00.355: ISDN Se0/0/1:15 Q931: TX -> SETUP pd = 8  callref = 0x1A99
            Sending Complete
            Bearer Capability i = 0x8090A3
                    Standard = CCITT
                    Transfer Capability = Speech
                    Transfer Mode = Circuit
                    Transfer Rate = 64 kbit/s
            Channel ID i = 0xA9839F
                    Exclusive, Channel 31
            Calling Party Number i = 0x0081, '565552838'
                    Plan:Unknown, Type:Unknown
            Called Party Number i = 0x80, '0615405708'
                    Plan:Unknown, Type:Unknown
    *Feb 25 09:20:00.375: ISDN Se0/0/1:15 Q931: RX <- CALL_PROC pd = 8  callref = 0x9A99
            Channel ID i = 0xA9839F
                    Exclusive, Channel 31
    *Feb 25 09:20:00.423: ISDN Se0/0/1:15 Q931: RX <- DISCONNECT pd = 8  callref = 0x9A99
            Cause i = 0x80FF - Interworking error; unspecified
    *Feb 25 09:20:00.447: ISDN Se0/0/1:15 Q931: TX -> RELEASE pd = 8  callref = 0x1A99
    *Feb 25 09:20:00.455: ISDN Se0/0/1:15 Q931: RX <- RELEASE_COMP pd = 8  callref = 0x9A99
    I need help please.
    Pierre

    Here is a similar Thread...
    https://supportforums.cisco.com/message/3927483#3927483
    https://supportforums.cisco.com/message/4004578#4004578
    Use can use the work around,..,
    Remove the BR1 from the route group, reset the Route lists and re-add the BR1 back and test again
    Please rate all useful posts
    "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"

  • HT4061 I have an iphone  5s, does not boot, blinking white screen with black logo, when trying itunes restore from mac and pc, error code 4013 which is usb error, any ideas?

    I have an iphone  5s, does not boot, blinking white screen with black logo, when trying itunes restore from mac and pc, error code 4013 which is usb error, any ideas?  Does a totally dead battery have that effect?  I have had it plugged in to a computer overnight, but maybe does not charge when totally dead?
    Please help, thanks in advance all1

    Hi eggroll77,
    Welcome to Apple Support Communities.
    That alert codes does suggest there is a USB related issue. If you haven’t already, try the troubleshooting suggestions in the article linked below.
    iOS: Restore errors 4005, 4013, and 4014
    I hope this helps.
    -Jason

  • Cannot delete file from external hard drive (error code 36) in Finder, but Terminal is ok

    I have a relatively new Macbook Pro Retina 15" and have a Western Digital 1 TB Passport.  I've been using the passport for about a year now without any problems on older Macbooks in my house.  I used to be able to read and write to this drive no problem.  I am using the Paragon NTFS for Mac software in order to read and write to the NTFS drive.  When I navigate through the drive in Finder, if I try to create a new folder, I do not have a problem.  If I try to delete that folder I just created, I get this error:
    The Finder can’t complete the operation because some data in “untitled folder” can’t be read or written.
    (Error code -36)
    The folder has nothing in it whatsoever.  I just created it.  But if I go to Terminal and I run
    rm -rf "untitled folder"
    This works fine.  Why is Terminal acting different than Finder?  This does not happen on my other Macbooks.  Thanks in advance.

    Thanx for such qucik reply!!! The pages were great, it had an answer for my problem, but unfortunately it also involved me dealing with it only on the MacIntosh HD itself, not on mounted external drive I suppose... So it didn't work they say that there is an icon in the left corner indicating locked folder - I don't see any icon on it. It says you can untick the box to unlock the folder - there is no tick to be unticked. Finally, they say that if I don't have permition or rights I cannot delete it. But how do i change permittion which already says that i can read and write in it? So everything appears to be normal only I cannot delete it. there is not even any warnig telling me I don't have enough rights, it just requires the password and after me typing it in it makes the sound of scraping paper but does nothing more. I aslo had some problems with emptying Trash after being seemingly succesful with one file and had got so far to have them appear in the Trash (no clue how this one actully got there though..) I followd the advice and emptied the Trash with Terminal. The Folder is still there but it shows 0 Kb... So far so good BUT: It is still on the external drive, so I obviously only managed to copy it into the Trash!!! Phew, innit a bit too tight to poor owners, this macbook?? I want my rights back!

Maybe you are looking for