Customize no-permissions error msg
If I set the Everyone group to essentially have no access to answers/dashboards/delivers and someone tries to sign in, I get an error message with the following:
Access Prohibited
You are not currently authorized to use Oracle BI Delivers
If you would like to use the powerful capability, please contact this site's administrator.
HOW CAN I EDIT THIS MESSAGE?
You can edit the deliverssysmessages.xml which can be found in the \OracleBI\web\msgdb\l_en\messages folder.
In there you can find this WebMessage:
<WebMessage name="kmsgDeliversNotCurrentlyAuthorized"><HTML>You are not currently authorized to use <sawm:messageRef name="kmsgProductDelivers"/>.
If you would like to use this powerful capability, please contact this site's administrator.
</HTML></WebMessage>
Regards,
Stijn
Similar Messages
-
Repairing permissions (Error msg. not understood)
Good evening,
So far my erase all/install of Leopard has gone smoothly on my 2Ghz Duo macbook, however I recently went in to Disk Utility to repair permissions and this popped up after it completed. (As a side note, repairing the permissions didn't take nearly as long on Tiger, not did it cause the fan to go into overdrive?)
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
What does this mean, and is it a a possible problem? I don't understand.
Thanks in advanceThere are a couple of other threads about this already. Search discussions using these words: Permissions Warning
You'll see a bunch of threads about the same thing.
Basically, I think I remember something being mentioned about Apple Script. Incidentally, I had the same problem. -
Editing a pdf form that I created. Adding header, currently the header only appears on page 1 of a 3 page pdf form. I want it to appear on each page. I am receiving the error msg "do not have sufficient permissions to perform this task"
In Adobe Acrobat use a Action for this.
-
You don't have Add and Customize Pages permissions required to perform this action - but i do!
Hello.
I am having a similar problem to the one described by this post here:
http://kiruthik.com/2010/10/05/YouDontHaveAddAndCustomizePagesPermissionsRequiredToPerformThisAction.aspx
However, his resolution of changing web.config under wwwroot did not fix my issue.
Here is the situation on a recently upgraded SP2010.
1) Create a document library. Set the document template to "basic page"
2) give a user full control on the document library.
3) Go, under that users credentials, to the document library and create a new document.
4) Name the document whatever and hit create
5) a page is displayed which says the following: "Web Part Error:
A Web Part or Web Form Control on this Page cannot be displayed or imported. You don't have Add and Customize Pages permissions required to perform this action."
6) Become confused as giving someone "full control" on the library should obviously inherit the permissions to when they create a document and try and edit it.
If i give the user "full control" on the entire site (site actions -> site permissions), then the document pops open an editor which would allow you to add content to the basic page. Obviously, i do not want to give users full control to the
entire site :)
Giving the user "Add and Customize Pages" permissions on the entire SITE allows them to edit get the popup to edit the file, but this is not desireable either since then they could "Add, change, or delete HTML pages or Web Part pages,
and edit the Web site using a Windows SharePoint Services-compatible editor.". I do not want them to edit any web pages, i just want them to edit a particular lists webpage!
Things i have tried:
- Set the permissions on the "MSContentEditor" webpart to have the user have full control of the web part.
- set the permissions on ALL the web parts to have the user have full control (permissions on the web parts list)
- Edited web.config to add a line to mark "contentEditorWebPart" as safe, and then restarted IIS.
- Recreated test lists and was able to duplicate the behaviour
So I am wondering, is this a sharepoint bug or what? Should a web part not inherit the permissions of the list it is working in? if not, what are the exact items i need to set permissions on to get this webpart to display correctly?
Setting global site permissions is not an option.
Another workaround is to make a "wiki page library" which allows you to copy and paste text into a static page, and also edit that text. I can move all the content over to a "wiki page library", and thats what i probably will end up doing
in the end, but its annoying because there is alot of content to move, and it all has to be done by hand as you cannot upload documents to a wiki afaik. Also the wiki uses a different editor, its inline instead of a popup in IE which is probably why it is
working.
This may not be a bug and could be a simple permissions problem or something else, but i have been looking at this for hours and it doesnt make any sense to me.
Any help appreciated thanks!Hi,
Yes, you must have “Add and Customize Pages” permission
from site level to perform this action, the permission is not in list permission level.
You can add a new permission level which only includes “Add and Customize Pages” permission, and then create new SharePoint group with this permission
level.
Add the users into the SharePoint group and these users will get the “Add and Customize Pages” permission
from site level.(site permissions)
Additionally to add/edit page, the users also need the permission level “Contributor” in list permission level.
(you should know when you grant the full control to the users in list permission level, the users won’t get the permission from site level)
If you need further help, please let me know.
Hope this helps
Thanks!
Stanfford
Everything will be fine. -
JVM CRASH with the error msg An unexpected error has been detected by HotS
Iam using Jboss 4.2.2 for my application
the JVM is crashing with the following msg when i call a function in a DLL (JNI)
the error msg :
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d963733, pid=3356, tid=3544
# Java VM: Java HotSpot(TM) Server VM (1.5.0_07-b03 mixed mode)
# Problematic frame:
# V [jvm.dll+0x93733]
# An error report file with more information is saved as hs_err_pid3356.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
Press any key to continue . . .
and the log file generated:
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d963733, pid=3356, tid=3544
# Java VM: Java HotSpot(TM) Server VM (1.5.0_07-b03 mixed mode)
# Problematic frame:
# V [jvm.dll+0x93733]
--------------- T H R E A D ---------------
Current thread (0x00991488): VMThread [id=3544]
siginfo: ExceptionCode=0xc0000005, reading address 0x00000440
Registers:
EAX=0x00000440, EBX=0x48284758, ECX=0x2cbefa5c, EDX=0x6dbcd170
ESP=0x2cbef9c4, EBP=0x000001c4, ESI=0x3800d3a4, EDI=0x2cbefa5c
EIP=0x6d963733, EFLAGS=0x00010283
Top of Stack: (sp=0x2cbef9c4)
0x2cbef9c4: 2cbefa5c 3800d3a0 6d982aab 3800d3a4
0x2cbef9d4: 2cbefa5c 2cbefa5c 0092a538 0092a538
0x2cbef9e4: 009449d0 6db4ff25 2cbefa5c 0092a7d0
0x2cbef9f4: 6d995c41 2cbefa5c 0092a538 0092a7d0
0x2cbefa04: 00000000 0092a538 6d964252 00000000
0x2cbefa14: 00000001 00000000 00000001 2cbefaa8
0x2cbefa24: 2cbefa5c 0092a538 0092a580 2cbefbfc
0x2cbefa34: 00990b70 0003f758 08bdef90 6dbcd110
Instructions: (pc=0x6d963733)
0x6d963723: 24 08 57 8b f9 8b 06 85 c0 74 3e 3b 47 1c 73 39
0x6d963733: 8b 08 83 e1 03 80 f9 03 75 06 8b 00 24 fc eb 0a
Stack: [0x2bcf0000,0x2cbf0000), sp=0x2cbef9c4, free space=15358k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
V [jvm.dll+0x93733]
[error occurred during error reporting, step 120, id 0xc0000005]
VM_Operation (0x65dbee54): generation collection for allocation, mode: safepoint, requested by thread 0x496f2dd0
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x35f27498 JavaThread "AWT-Windows" daemon [_thread_in_native, id=3508]
0x3178fde8 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=748]
0x496f2dd0 JavaThread "http-0.0.0.0-8080-3" daemon [_thread_blocked, id=3044]
0x356c4008 JavaThread "IdleRemover" daemon [_thread_blocked, id=2832]
0x496bdae0 JavaThread "http-0.0.0.0-8080-2" daemon [_thread_blocked, id=2452]
0x31713dc0 JavaThread "http-0.0.0.0-8080-1" daemon [_thread_blocked, id=2740]
0x49538008 JavaThread "Thread-6" [_thread_blocked, id=752]
0x485d4008 JavaThread "ajp-0.0.0.0-8009-Acceptor-0" daemon [_thread_in_native, id=1548]
0x498b6dd0 JavaThread "http-0.0.0.0-8080-Acceptor-0" daemon [_thread_blocked, id=3892]
0x493eb008 JavaThread "JBossLifeThread" [_thread_blocked, id=3392]
0x3827f260 JavaThread "UILServerILService Accept Thread" [_thread_in_native, id=1900]
0x388c9758 JavaThread "TimeoutFactory-0" daemon [_thread_blocked, id=1996]
0x35a187b0 JavaThread "JCA PoolFiller" [_thread_blocked, id=2460]
0x4948c448 JavaThread "Timer-2" daemon [_thread_blocked, id=3816]
0x48712e80 JavaThread "HSQLDB Timer @9db0ad" daemon [_thread_blocked, id=2456]
0x35706d30 JavaThread "DefaultQuartzScheduler_QuartzSchedulerThread" [_thread_blocked, id=3088]
0x385ed548 JavaThread "DefaultQuartzScheduler_Worker-9" [_thread_blocked, id=2876]
0x38282e60 JavaThread "DefaultQuartzScheduler_Worker-8" [_thread_blocked, id=2916]
0x38282708 JavaThread "DefaultQuartzScheduler_Worker-7" [_thread_blocked, id=2172]
0x36061c68 JavaThread "DefaultQuartzScheduler_Worker-6" [_thread_blocked, id=2680]
0x31865dd8 JavaThread "DefaultQuartzScheduler_Worker-5" [_thread_blocked, id=3868]
0x483a8d48 JavaThread "DefaultQuartzScheduler_Worker-4" [_thread_blocked, id=3208]
0x483a8a90 JavaThread "DefaultQuartzScheduler_Worker-3" [_thread_blocked, id=4000]
0x355bcd90 JavaThread "DefaultQuartzScheduler_Worker-2" [_thread_blocked, id=1056]
0x48998d38 JavaThread "DefaultQuartzScheduler_Worker-1" [_thread_blocked, id=1712]
0x383e7d58 JavaThread "DefaultQuartzScheduler_Worker-0" [_thread_blocked, id=3752]
0x485e6ed0 JavaThread "WorkManager(2)-1" daemon [_thread_blocked, id=3448]
0x488a0008 JavaThread "Thread-7" daemon [_thread_blocked, id=3620]
0x38410008 JavaThread "JBossMQ Cache Reference Softner" daemon [_thread_blocked, id=928]
0x382d1bf0 JavaThread "ContainerBackgroundProcessor[StandardEngine[jboss.web]]" daemon [_thread_blocked, id=3116]
0x37fb6de0 JavaThread "SubscriptionWatchDog" [_thread_blocked, id=3512]
0x357e78c8 JavaThread "ServerSocketRefresh" daemon [_thread_blocked, id=1128]
0x381fb310 JavaThread "AcceptorThread#0:3873" [_thread_in_native, id=3096]
0x381e33b0 JavaThread "ServerSocketRefresh" daemon [_thread_blocked, id=1076]
0x318e5d90 JavaThread "AcceptorThread#0:4446" [_thread_in_native, id=2340]
0x35d15b80 JavaThread "PooledInvokerAcceptor#0-4445" [_thread_in_native, id=2332]
0x35fa1c98 JavaThread "RMI TCP Accept-4444" daemon [_thread_in_native, id=164]
0x35d15df0 JavaThread "Listener:2365" daemon [_thread_in_native, id=3408]
0x35d13dc8 JavaThread "Thread-5" daemon [_thread_blocked, id=1928]
0x35f35c60 JavaThread "Thread-4" daemon [_thread_blocked, id=4032]
0x35d66db0 JavaThread "Listener:2361" daemon [_thread_in_native, id=2168]
0x3828dd90 JavaThread "JBoss System Threads(1)-2" daemon [_thread_in_native, id=3052]
0x35da8ab0 JavaThread "GC Daemon" daemon [_thread_blocked, id=2028]
0x35d390c8 JavaThread "RMI Reaper" [_thread_blocked, id=488]
0x35cedaa8 JavaThread "Timer-1" daemon [_thread_blocked, id=2900]
0x35ced920 JavaThread "RMI TCP Accept-1098" daemon [_thread_in_native, id=3908]
0x35dd35a0 JavaThread "JBoss System Threads(1)-1" daemon [_thread_in_native, id=872]
0x35e42e48 JavaThread "ScannerThread" daemon [_thread_blocked, id=168]
0x31895da8 JavaThread "Timer-0" daemon [_thread_blocked, id=3324]
0x00037aa0 JavaThread "DestroyJavaVM" [_thread_blocked, id=1244]
0x316f0c48 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=3904]
0x0099f900 JavaThread "CompilerThread1" daemon [_thread_blocked, id=228]
0x0099ea98 JavaThread "CompilerThread0" daemon [_thread_blocked, id=2696]
0x0099dbf0 JavaThread "AdapterThread" daemon [_thread_blocked, id=3360]
0x0099cf10 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=892]
0x00993968 JavaThread "Finalizer" daemon [_thread_blocked, id=2776]
0x00993620 JavaThread "Reference Handler" daemon [_thread_blocked, id=1348]
Other Threads:
=>0x00991488 VMThread [id=3544]
0x316f1f58 WatcherThread [id=3288]
VM state:at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: ([mutex/lock_event])
[0x00037158/0x0000071c] Threads_lock - owner thread: 0x00991488
[0x000372d8/0x000006e0] Heap_lock - owner thread: 0x496f2dd0
Heap
def new generation total 20736K, used 17960K [0x03a60000, 0x050e0000, 0x07340000)
eden space 18432K, 97% used [0x03a60000, 0x04be8eb0, 0x04c60000)
from space 2304K, 0% used [0x04ea0000, 0x04ea1350, 0x050e0000)
to space 2304K, 0% used [0x04c60000, 0x04c605b0, 0x04ea0000)
tenured generation total 183196K, used 125267K [0x07340000, 0x12627000, 0x23a60000)
the space 183196K, 68% used [0x07340000, 0x0ed94d90, 0x0ed94e00, 0x12627000)
compacting perm gen total 131072K, used 39965K [0x23a60000, 0x2ba60000, 0x2ba60000)
the space 131072K, 30% used [0x23a60000, 0x261677a8, 0x26167800, 0x2ba60000)
No shared spaces configured.
Dynamic libraries:
0x00400000 - 0x0040d000 F:\Java\jdk1.5.0_07\bin\java.exe
0x7c900000 - 0x7c9b0000 C:\WINDOWS\system32\ntdll.dll
0x7c800000 - 0x7c8f5000 C:\WINDOWS\system32\kernel32.dll
0x77dd0000 - 0x77e6b000 C:\WINDOWS\system32\ADVAPI32.dll
0x77e70000 - 0x77f01000 C:\WINDOWS\system32\RPCRT4.dll
0x77c10000 - 0x77c68000 C:\WINDOWS\system32\MSVCRT.dll
0x6d8d0000 - 0x6dc85000 F:\Java\jdk1.5.0_07\jre\bin\server\jvm.dll
0x7e410000 - 0x7e4a0000 C:\WINDOWS\system32\USER32.dll
0x77f10000 - 0x77f57000 C:\WINDOWS\system32\GDI32.dll
0x76b40000 - 0x76b6d000 C:\WINDOWS\system32\WINMM.dll
0x76390000 - 0x763ad000 C:\WINDOWS\system32\IMM32.DLL
0x6d2f0000 - 0x6d2f8000 F:\Java\jdk1.5.0_07\jre\bin\hpi.dll
0x76bf0000 - 0x76bfb000 C:\WINDOWS\system32\PSAPI.DLL
0x6d700000 - 0x6d70c000 F:\Java\jdk1.5.0_07\jre\bin\verify.dll
0x6d370000 - 0x6d38d000 F:\Java\jdk1.5.0_07\jre\bin\java.dll
0x6d720000 - 0x6d72f000 F:\Java\jdk1.5.0_07\jre\bin\zip.dll
0x6d530000 - 0x6d543000 F:\Java\jdk1.5.0_07\jre\bin\net.dll
0x71ab0000 - 0x71ac7000 C:\WINDOWS\system32\WS2_32.dll
0x71aa0000 - 0x71aa8000 C:\WINDOWS\system32\WS2HELP.dll
0x71a50000 - 0x71a8f000 C:\WINDOWS\System32\mswsock.dll
0x76f20000 - 0x76f47000 C:\WINDOWS\system32\DNSAPI.dll
0x76fb0000 - 0x76fb8000 C:\WINDOWS\System32\winrnr.dll
0x76f60000 - 0x76f8c000 C:\WINDOWS\system32\WLDAP32.dll
0x76fc0000 - 0x76fc6000 C:\WINDOWS\system32\rasadhlp.dll
0x6d520000 - 0x6d528000 F:\Java\jdk1.5.0_07\jre\bin\management.dll
0x662b0000 - 0x66308000 C:\WINDOWS\system32\hnetcfg.dll
0x71a90000 - 0x71a98000 C:\WINDOWS\System32\wshtcpip.dll
0x39e60000 - 0x39e88000 C:\WINDOWS\system32\rsaenh.dll
0x769c0000 - 0x76a73000 C:\WINDOWS\system32\USERENV.dll
0x5b860000 - 0x5b8b4000 C:\WINDOWS\system32\netapi32.dll
0x6d550000 - 0x6d559000 F:\Java\jdk1.5.0_07\jre\bin\nio.dll
0x6d070000 - 0x6d1d7000 F:\Java\jdk1.5.0_07\jre\bin\awt.dll
0x73000000 - 0x73026000 C:\WINDOWS\system32\WINSPOOL.DRV
0x774e0000 - 0x7761d000 C:\WINDOWS\system32\ole32.dll
0x462a0000 - 0x462d8000 C:\WINDOWS\system32\uxtheme.dll
0x73760000 - 0x737a9000 C:\WINDOWS\system32\ddraw.dll
0x73bc0000 - 0x73bc6000 C:\WINDOWS\system32\DCIMAN32.dll
0x73940000 - 0x73a10000 C:\WINDOWS\system32\D3DIM700.DLL
0x6d2b0000 - 0x6d2ef000 F:\Java\jdk1.5.0_07\jre\bin\fontmanager.dll
0x74720000 - 0x7476b000 C:\WINDOWS\system32\MSCTF.dll
0x755c0000 - 0x755ee000 C:\WINDOWS\system32\msctfime.ime
0x6d430000 - 0x6d44f000 F:\Java\jdk1.5.0_07\jre\bin\jpeg.dll
0x47290000 - 0x472a3000 F:\jboss-4.2.2.GA\bin\locateprintsdll.dll
0x73dd0000 - 0x73ece000 C:\WINDOWS\system32\MFC42.DLL
0x472b0000 - 0x472bd000 C:\WINDOWS\system32\MFC42LOC.DLL
VM Arguments:
jvm_args: -Dprogram.name=run.bat -Dreports.configDir=F:/jboss-4.2.2.GA/server/default/conf/ -XX:PermSize=128m -Xms128m -Xmx512m -Xss15m -Dsun.rmi.dgc.client.gcInterval=3600000 -Dsun.rmi.dgc.server.gcInterval=3600000 -Dsun.rmi.dgc.client.gcInterval=3600000 -Dsun.rmi.dgc.server.gcInterval=3600000 -Djava.endorsed.dirs=F:\jboss-4.2.2.GA\lib\endorsed
java_command: org.jboss.Main -b 0.0.0.0
Launcher Type: SUN_STANDARD
Environment Variables:
JAVA_HOME=F:\Java\jdk1.5.0_07
CLASSPATH=F:\Tomcat 5.5\webapps\IWS\WEB-INF\lib\servlet-api.jar;.
PATH=D:\oracle\ora92\bin;C:\Program Files\PC Connectivity Solution\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\ATI Technologies\ATI.ACE\;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\PROGRA~1\CA\SHARED~1\SCANEN~1;C:\PROGRA~1\CA\ETRUST~1;C:\Program Files\Rational\common;F:\Java\jdk1.5.0_07\bin;F:\Java\jre1.5.0_07\bin;F:\jboss-4.2.2.GA\DLLs;
USERNAME=Arun
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 15 Model 6 Stepping 5, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 2
CPU:total 2 family 15, cmov, cx8, fxsr, mmx, sse, sse2, ht
Memory: 4k page, physical 1013660k(193696k free), swap 2444544k(642724k free)
vm_info: Java HotSpot(TM) Server VM (1.5.0_07-b03) for windows-x86, built on May 3 2006 00:45:13 by "java_re" with MS VC++ 6.0
pls help me ...
thanks in advanceIam using Jboss 4.2.2 for my application
the JVM is crashing with the following msg when i call a function in a DLL (JNI)
the error msg :
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d963733, pid=3356, tid=3544
# Java VM: Java HotSpot(TM) Server VM (1.5.0_07-b03 mixed mode)
# Problematic frame:
# V [jvm.dll+0x93733]
# An error report file with more information is saved as hs_err_pid3356.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
Press any key to continue . . .
and the log file generated:
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d963733, pid=3356, tid=3544
# Java VM: Java HotSpot(TM) Server VM (1.5.0_07-b03 mixed mode)
# Problematic frame:
# V [jvm.dll+0x93733]
--------------- T H R E A D ---------------
Current thread (0x00991488): VMThread [id=3544]
siginfo: ExceptionCode=0xc0000005, reading address 0x00000440
Registers:
EAX=0x00000440, EBX=0x48284758, ECX=0x2cbefa5c, EDX=0x6dbcd170
ESP=0x2cbef9c4, EBP=0x000001c4, ESI=0x3800d3a4, EDI=0x2cbefa5c
EIP=0x6d963733, EFLAGS=0x00010283
Top of Stack: (sp=0x2cbef9c4)
0x2cbef9c4: 2cbefa5c 3800d3a0 6d982aab 3800d3a4
0x2cbef9d4: 2cbefa5c 2cbefa5c 0092a538 0092a538
0x2cbef9e4: 009449d0 6db4ff25 2cbefa5c 0092a7d0
0x2cbef9f4: 6d995c41 2cbefa5c 0092a538 0092a7d0
0x2cbefa04: 00000000 0092a538 6d964252 00000000
0x2cbefa14: 00000001 00000000 00000001 2cbefaa8
0x2cbefa24: 2cbefa5c 0092a538 0092a580 2cbefbfc
0x2cbefa34: 00990b70 0003f758 08bdef90 6dbcd110
Instructions: (pc=0x6d963733)
0x6d963723: 24 08 57 8b f9 8b 06 85 c0 74 3e 3b 47 1c 73 39
0x6d963733: 8b 08 83 e1 03 80 f9 03 75 06 8b 00 24 fc eb 0a
Stack: [0x2bcf0000,0x2cbf0000), sp=0x2cbef9c4, free space=15358k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
V [jvm.dll+0x93733]
[error occurred during error reporting, step 120, id 0xc0000005]
VM_Operation (0x65dbee54): generation collection for allocation, mode: safepoint, requested by thread 0x496f2dd0
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x35f27498 JavaThread "AWT-Windows" daemon [_thread_in_native, id=3508]
0x3178fde8 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=748]
0x496f2dd0 JavaThread "http-0.0.0.0-8080-3" daemon [_thread_blocked, id=3044]
0x356c4008 JavaThread "IdleRemover" daemon [_thread_blocked, id=2832]
0x496bdae0 JavaThread "http-0.0.0.0-8080-2" daemon [_thread_blocked, id=2452]
0x31713dc0 JavaThread "http-0.0.0.0-8080-1" daemon [_thread_blocked, id=2740]
0x49538008 JavaThread "Thread-6" [_thread_blocked, id=752]
0x485d4008 JavaThread "ajp-0.0.0.0-8009-Acceptor-0" daemon [_thread_in_native, id=1548]
0x498b6dd0 JavaThread "http-0.0.0.0-8080-Acceptor-0" daemon [_thread_blocked, id=3892]
0x493eb008 JavaThread "JBossLifeThread" [_thread_blocked, id=3392]
0x3827f260 JavaThread "UILServerILService Accept Thread" [_thread_in_native, id=1900]
0x388c9758 JavaThread "TimeoutFactory-0" daemon [_thread_blocked, id=1996]
0x35a187b0 JavaThread "JCA PoolFiller" [_thread_blocked, id=2460]
0x4948c448 JavaThread "Timer-2" daemon [_thread_blocked, id=3816]
0x48712e80 JavaThread "HSQLDB Timer @9db0ad" daemon [_thread_blocked, id=2456]
0x35706d30 JavaThread "DefaultQuartzScheduler_QuartzSchedulerThread" [_thread_blocked, id=3088]
0x385ed548 JavaThread "DefaultQuartzScheduler_Worker-9" [_thread_blocked, id=2876]
0x38282e60 JavaThread "DefaultQuartzScheduler_Worker-8" [_thread_blocked, id=2916]
0x38282708 JavaThread "DefaultQuartzScheduler_Worker-7" [_thread_blocked, id=2172]
0x36061c68 JavaThread "DefaultQuartzScheduler_Worker-6" [_thread_blocked, id=2680]
0x31865dd8 JavaThread "DefaultQuartzScheduler_Worker-5" [_thread_blocked, id=3868]
0x483a8d48 JavaThread "DefaultQuartzScheduler_Worker-4" [_thread_blocked, id=3208]
0x483a8a90 JavaThread "DefaultQuartzScheduler_Worker-3" [_thread_blocked, id=4000]
0x355bcd90 JavaThread "DefaultQuartzScheduler_Worker-2" [_thread_blocked, id=1056]
0x48998d38 JavaThread "DefaultQuartzScheduler_Worker-1" [_thread_blocked, id=1712]
0x383e7d58 JavaThread "DefaultQuartzScheduler_Worker-0" [_thread_blocked, id=3752]
0x485e6ed0 JavaThread "WorkManager(2)-1" daemon [_thread_blocked, id=3448]
0x488a0008 JavaThread "Thread-7" daemon [_thread_blocked, id=3620]
0x38410008 JavaThread "JBossMQ Cache Reference Softner" daemon [_thread_blocked, id=928]
0x382d1bf0 JavaThread "ContainerBackgroundProcessor[StandardEngine[jboss.web]]" daemon [_thread_blocked, id=3116]
0x37fb6de0 JavaThread "SubscriptionWatchDog" [_thread_blocked, id=3512]
0x357e78c8 JavaThread "ServerSocketRefresh" daemon [_thread_blocked, id=1128]
0x381fb310 JavaThread "AcceptorThread#0:3873" [_thread_in_native, id=3096]
0x381e33b0 JavaThread "ServerSocketRefresh" daemon [_thread_blocked, id=1076]
0x318e5d90 JavaThread "AcceptorThread#0:4446" [_thread_in_native, id=2340]
0x35d15b80 JavaThread "PooledInvokerAcceptor#0-4445" [_thread_in_native, id=2332]
0x35fa1c98 JavaThread "RMI TCP Accept-4444" daemon [_thread_in_native, id=164]
0x35d15df0 JavaThread "Listener:2365" daemon [_thread_in_native, id=3408]
0x35d13dc8 JavaThread "Thread-5" daemon [_thread_blocked, id=1928]
0x35f35c60 JavaThread "Thread-4" daemon [_thread_blocked, id=4032]
0x35d66db0 JavaThread "Listener:2361" daemon [_thread_in_native, id=2168]
0x3828dd90 JavaThread "JBoss System Threads(1)-2" daemon [_thread_in_native, id=3052]
0x35da8ab0 JavaThread "GC Daemon" daemon [_thread_blocked, id=2028]
0x35d390c8 JavaThread "RMI Reaper" [_thread_blocked, id=488]
0x35cedaa8 JavaThread "Timer-1" daemon [_thread_blocked, id=2900]
0x35ced920 JavaThread "RMI TCP Accept-1098" daemon [_thread_in_native, id=3908]
0x35dd35a0 JavaThread "JBoss System Threads(1)-1" daemon [_thread_in_native, id=872]
0x35e42e48 JavaThread "ScannerThread" daemon [_thread_blocked, id=168]
0x31895da8 JavaThread "Timer-0" daemon [_thread_blocked, id=3324]
0x00037aa0 JavaThread "DestroyJavaVM" [_thread_blocked, id=1244]
0x316f0c48 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=3904]
0x0099f900 JavaThread "CompilerThread1" daemon [_thread_blocked, id=228]
0x0099ea98 JavaThread "CompilerThread0" daemon [_thread_blocked, id=2696]
0x0099dbf0 JavaThread "AdapterThread" daemon [_thread_blocked, id=3360]
0x0099cf10 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=892]
0x00993968 JavaThread "Finalizer" daemon [_thread_blocked, id=2776]
0x00993620 JavaThread "Reference Handler" daemon [_thread_blocked, id=1348]
Other Threads:
=>0x00991488 VMThread [id=3544]
0x316f1f58 WatcherThread [id=3288]
VM state:at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: ([mutex/lock_event])
[0x00037158/0x0000071c] Threads_lock - owner thread: 0x00991488
[0x000372d8/0x000006e0] Heap_lock - owner thread: 0x496f2dd0
Heap
def new generation total 20736K, used 17960K [0x03a60000, 0x050e0000, 0x07340000)
eden space 18432K, 97% used [0x03a60000, 0x04be8eb0, 0x04c60000)
from space 2304K, 0% used [0x04ea0000, 0x04ea1350, 0x050e0000)
to space 2304K, 0% used [0x04c60000, 0x04c605b0, 0x04ea0000)
tenured generation total 183196K, used 125267K [0x07340000, 0x12627000, 0x23a60000)
the space 183196K, 68% used [0x07340000, 0x0ed94d90, 0x0ed94e00, 0x12627000)
compacting perm gen total 131072K, used 39965K [0x23a60000, 0x2ba60000, 0x2ba60000)
the space 131072K, 30% used [0x23a60000, 0x261677a8, 0x26167800, 0x2ba60000)
No shared spaces configured.
Dynamic libraries:
0x00400000 - 0x0040d000 F:\Java\jdk1.5.0_07\bin\java.exe
0x7c900000 - 0x7c9b0000 C:\WINDOWS\system32\ntdll.dll
0x7c800000 - 0x7c8f5000 C:\WINDOWS\system32\kernel32.dll
0x77dd0000 - 0x77e6b000 C:\WINDOWS\system32\ADVAPI32.dll
0x77e70000 - 0x77f01000 C:\WINDOWS\system32\RPCRT4.dll
0x77c10000 - 0x77c68000 C:\WINDOWS\system32\MSVCRT.dll
0x6d8d0000 - 0x6dc85000 F:\Java\jdk1.5.0_07\jre\bin\server\jvm.dll
0x7e410000 - 0x7e4a0000 C:\WINDOWS\system32\USER32.dll
0x77f10000 - 0x77f57000 C:\WINDOWS\system32\GDI32.dll
0x76b40000 - 0x76b6d000 C:\WINDOWS\system32\WINMM.dll
0x76390000 - 0x763ad000 C:\WINDOWS\system32\IMM32.DLL
0x6d2f0000 - 0x6d2f8000 F:\Java\jdk1.5.0_07\jre\bin\hpi.dll
0x76bf0000 - 0x76bfb000 C:\WINDOWS\system32\PSAPI.DLL
0x6d700000 - 0x6d70c000 F:\Java\jdk1.5.0_07\jre\bin\verify.dll
0x6d370000 - 0x6d38d000 F:\Java\jdk1.5.0_07\jre\bin\java.dll
0x6d720000 - 0x6d72f000 F:\Java\jdk1.5.0_07\jre\bin\zip.dll
0x6d530000 - 0x6d543000 F:\Java\jdk1.5.0_07\jre\bin\net.dll
0x71ab0000 - 0x71ac7000 C:\WINDOWS\system32\WS2_32.dll
0x71aa0000 - 0x71aa8000 C:\WINDOWS\system32\WS2HELP.dll
0x71a50000 - 0x71a8f000 C:\WINDOWS\System32\mswsock.dll
0x76f20000 - 0x76f47000 C:\WINDOWS\system32\DNSAPI.dll
0x76fb0000 - 0x76fb8000 C:\WINDOWS\System32\winrnr.dll
0x76f60000 - 0x76f8c000 C:\WINDOWS\system32\WLDAP32.dll
0x76fc0000 - 0x76fc6000 C:\WINDOWS\system32\rasadhlp.dll
0x6d520000 - 0x6d528000 F:\Java\jdk1.5.0_07\jre\bin\management.dll
0x662b0000 - 0x66308000 C:\WINDOWS\system32\hnetcfg.dll
0x71a90000 - 0x71a98000 C:\WINDOWS\System32\wshtcpip.dll
0x39e60000 - 0x39e88000 C:\WINDOWS\system32\rsaenh.dll
0x769c0000 - 0x76a73000 C:\WINDOWS\system32\USERENV.dll
0x5b860000 - 0x5b8b4000 C:\WINDOWS\system32\netapi32.dll
0x6d550000 - 0x6d559000 F:\Java\jdk1.5.0_07\jre\bin\nio.dll
0x6d070000 - 0x6d1d7000 F:\Java\jdk1.5.0_07\jre\bin\awt.dll
0x73000000 - 0x73026000 C:\WINDOWS\system32\WINSPOOL.DRV
0x774e0000 - 0x7761d000 C:\WINDOWS\system32\ole32.dll
0x462a0000 - 0x462d8000 C:\WINDOWS\system32\uxtheme.dll
0x73760000 - 0x737a9000 C:\WINDOWS\system32\ddraw.dll
0x73bc0000 - 0x73bc6000 C:\WINDOWS\system32\DCIMAN32.dll
0x73940000 - 0x73a10000 C:\WINDOWS\system32\D3DIM700.DLL
0x6d2b0000 - 0x6d2ef000 F:\Java\jdk1.5.0_07\jre\bin\fontmanager.dll
0x74720000 - 0x7476b000 C:\WINDOWS\system32\MSCTF.dll
0x755c0000 - 0x755ee000 C:\WINDOWS\system32\msctfime.ime
0x6d430000 - 0x6d44f000 F:\Java\jdk1.5.0_07\jre\bin\jpeg.dll
0x47290000 - 0x472a3000 F:\jboss-4.2.2.GA\bin\locateprintsdll.dll
0x73dd0000 - 0x73ece000 C:\WINDOWS\system32\MFC42.DLL
0x472b0000 - 0x472bd000 C:\WINDOWS\system32\MFC42LOC.DLL
VM Arguments:
jvm_args: -Dprogram.name=run.bat -Dreports.configDir=F:/jboss-4.2.2.GA/server/default/conf/ -XX:PermSize=128m -Xms128m -Xmx512m -Xss15m -Dsun.rmi.dgc.client.gcInterval=3600000 -Dsun.rmi.dgc.server.gcInterval=3600000 -Dsun.rmi.dgc.client.gcInterval=3600000 -Dsun.rmi.dgc.server.gcInterval=3600000 -Djava.endorsed.dirs=F:\jboss-4.2.2.GA\lib\endorsed
java_command: org.jboss.Main -b 0.0.0.0
Launcher Type: SUN_STANDARD
Environment Variables:
JAVA_HOME=F:\Java\jdk1.5.0_07
CLASSPATH=F:\Tomcat 5.5\webapps\IWS\WEB-INF\lib\servlet-api.jar;.
PATH=D:\oracle\ora92\bin;C:\Program Files\PC Connectivity Solution\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\ATI Technologies\ATI.ACE\;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\PROGRA~1\CA\SHARED~1\SCANEN~1;C:\PROGRA~1\CA\ETRUST~1;C:\Program Files\Rational\common;F:\Java\jdk1.5.0_07\bin;F:\Java\jre1.5.0_07\bin;F:\jboss-4.2.2.GA\DLLs;
USERNAME=Arun
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 15 Model 6 Stepping 5, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 2
CPU:total 2 family 15, cmov, cx8, fxsr, mmx, sse, sse2, ht
Memory: 4k page, physical 1013660k(193696k free), swap 2444544k(642724k free)
vm_info: Java HotSpot(TM) Server VM (1.5.0_07-b03) for windows-x86, built on May 3 2006 00:45:13 by "java_re" with MS VC++ 6.0
pls help me ...
thanks in advance -
Unusual permissions repair msg on Leopard
After a couple bumpy weeks on Leopard it's finally stabilizing... but I do need to repair permissions about once per week due to sluggishness after installing new software... and the last two times I've received the same error msg:
Repairing permissions for “TCR 40G”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
This looks bad to me. Can anyone please advise? I used DiskWarrior in between these last two permission repairs so I was surprised to get the same msg.Don't worry about this--it is a known issue:
http://docs.info.apple.com/article.html?artnum=306925
If you do the combo update 10.5.1 from the Apple site, it will get rid of all but one of the SUID warnings. The 10.5.2 update just came out, and it might get rid of the last one--don't know because I haven't downloaded it yet. But you do want to do the combo update from the Apple site rather than using Software Update.
Good luck! -
SQL 2012 Cluster install - error msg
Hi
I am in the process of installing SQL server 2012 cluster, on the Instance configuration page where i gave "SQL Server Network Name" as "appsqlclsA" and the "Named Instance" as "Ins01". I am getting the below
error msg, i am not sure exactly what permissions i need.
"The SQL Server failover cluster network name "appsqlclsA" is not valid. The name must be a valid DNS and Wins name.
So what i understand is i do not have permission to create the virtual sql name account "appsqlclsA"" in the AD.
But i need help finding exactly what permission i need.
Thank you for your helpTake a look at this
TechNet article for assigning permissions in Active Directory to create the virtual computer object. Either you are granted the appropriate permissions or the virtual computer object be pre-staged prior to installation
Edwin Sarmiento SQL Server MVP | Microsoft Certified Master
Blog |
Twitter | LinkedIn
SQL Server High Availability and Disaster Recover Deep Dive Course -
What to do about error msg in Disk Utility on MacBook Air:
Warning: SUID file “System/Library/Core/Services/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDA gent"has been modified and will not be repaired.”As long as the report ends up with 'Permissions repair complete' then, as far as permissions go, you are fine. You can ignore the various statements in the report:
Permissions you can ignore on 10.5 onwards:
http://support.apple.com/kb/TS1448
Using 'should be -rw-r--r-- , they are lrw-r--r--' as an example, you will see the that the permissions are not changed, but the | indicates a different location. This is because an update to Leopard onwards changed the location of a number of system components.
Poster rccharles has provided this description of what it all means:
drwxrwxrwx
d = directory
r = read
w = write
x = executeable program
drwxrwxrwx
| | |
| | all other users not in first two types
| |
| group
|
owner -
Windows 7 PC error msg when trying to (re)install Adobe Reader
After manually cleaning up my HD to make room, I'm thinking that could be the reason, but I don't remember uninstalling any Adobe products. The error msg is as follows: "Windows installer does not permit updating of managed advertised products. At least one feature of the product must be installed before applying the update". Please help me workaround this to install it properly. Thx
I suggest that you uninstall any remains of existing Reader versions using http://labs.adobe.com/downloads/acrobatcleaner.html then download and run the installer from http://get.adobe.com/reader/enterprise/
-
Plz help
My mac won't boot up it goes to a apple sign then the spin thing then gives me a error msg on a 10.5.8 imac what do I do?Hi LIsa,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Or..
Tough without the Install Disk problems, but try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup.
Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
(SPACE between fsck AND -fy important)
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
The volume (name_of_volume) appears to be OK
If fsck found issues and has altered, repaired, or fixed anything, it will display this message:
***** FILE SYSTEM WAS MODIFIED *****
Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return. -
Error converting image get error msg when trying to display thumbnail
Hi there
Me again
I am having some problems displaying thumbnails
I keep getting the error
Error converting image (create thumbnail). The "...........public_html/productimages/thumbnails/" folder has no write permissions.
So I go to my host and change write permissions on the files to 755 and try again and get the same msg
Then I contacted my host and changed the permissions to 777 and I went to the includes config file and changed the permissions to 777 too and still does not work
So I go to my cpanel and check all the files are set to 777 I make a new test page with a dynamic table and show thumbnail behavior and get the same error msgs
So I close DW restart and try again and get the same msg.......
So then I check the file permissions in the DW split screen window when connected to server..... I right click on some files on my server.... namely the 'thumbnails' file and check its permission and it is only set to 755 but in my host it is set to 777
So I try to change ppermissions from DW and get the
"setting access properties failed for: ' error
So what is the correct permissiion..... 755 or 777?
I have read two other posts on this forum and I still cant get to work
Does anyone have any ideas
I have used up all my options and most of my patience
I hope I can get this working asap....
Have a nice dayTry going through the steps in this document:
http://support.apple.com/kb/TS1539
CG -
Permissions error during Cross-Forest Cert enrollment
Hello,
When attempting to manually enroll for a Cert on a 2012 R2 server, I get the 'Certificate types are not available' msg with the 'You cannot request a cert at this time because no certificate types are available' msg. When I click the 'Show all templates'
box, all the cert types are shown with a Status: Unavailable and the msg 'The permissions on the certificate template do not allow the current user to enroll for this type of cert'.
In this instance, the CA infrastructure is in the Resource forest with the server attempting a cert enroll in the Account forest. Both Forests are 2008 R2 with a two-way Forest Trust. We followed all steps in the 'Cross-forest Certificate Enrollment
with Windows Server 2008 R2' doc published by Microsoft with no issues. The PKISync worked fine and we do see the Root and SubCA1 certs on the machine we are trying to manually enroll a cert on. We implemented all the steps to ensure this machine
receives a cert the same way machines in the Resource forest receive certs. We've validated the base Trust/Network infrastructure and all checks out. However, the Resource root forest and domain is all one and on the same domain controllers whereas
the Account forest has the classical Forest root with two separate domain controllers and then a child domain with a number of domain controllers. The child domain is where the server lives which we are trying to manually enroll a cert.
As a point of clarification, the server computer account was added to a Global Security group in the Account Forest. This group was added to a Domain Local Security group in the Resource Forest which has the Read/Enroll/AutoEnroll permissions on the
Cert Template.
Any suggestions on what could be causing the permissions errors?
Thanks for your help! SdeDotCertificate Template permissions can never be assigned to a Domain Local group, only to Universal or Global groups.
The correct strategy in a multi-forest scenario is the following:
1) Create a universal group for the certificate template in the account forest (say
Accountdomain\pki-authcert-u)
2) Create a universal group for the certificate template in the resource forest (say Resourcedomain\pki-authcert-u)
3) Create multiple global groups in each domain in the account forest (if three domains in the forest, create three global groups - one in each domain). Then add the user accounts to the global group in the same domain)
4) Create multiple global groups in each domain in the resource forest (if three domains in the forest, create three global groups - one in each domain). Then add the user accounts to the global group in the same domain)
5) On the certificate template, assign the two universal groups Read, Enroll, (and Autoenroll) permissions. That is both Accountdomain\pki-authcert-u and Resourcedomain\pki-authcert-u
6) Run the pkisync.ps script again to replicate the new permissions
The reason you cannot use domain local groups is that the certificate template is stored in the Configuration naming context which is replicated to each domain in the forest (account or resource in your case).
A domain local group can only be used in the domain where the group exists (not good for PKI objects in the configuration NC.
Brian -
Hi All,
Since I upgraded to ML, I keep getting error msg. 4 my lacie external drive that it unexpectedly quit. It then proceeds to go away and reappear again a few mins. will appear. It also mentions this ejection could destroy my data. I've already updated the Driver to the most current one ta LaCie had for my 500 GB Rikki External. That didn't help. I also tried Disk Utility to repair permissions No Help! Suggestions?That would be highly unusual, since the Apple ID is almost always the email address, unless it's changed later, and normally has to be unique to set up a new Apple ID. In any case, if you have two Apple IDs (or more), you probably need to authorize the computer using both.
Regards. -
Permissions Error if Script is run more than once with out closing Diadem
I am in a REAL pickle here and need some HELP......
I get a permissions error message when I try and run my scripts more than once with out closing Diadem 2011.
Call scriptinclude ("D:\_Calterm_Configuration_Files\Technical_Information\DIAdem_Scripts\Importing Multiple Data Logs_CaltermIII_Local.VBS")
Error is around this portion of script:
'******* GetFilePaths() *** *** NEW Function ***
Function GetFilePaths(DefaultDir, ExtFilter, MultipleDir, Msg)
Dim i, k, f, fso, iMax, FileListPath, StartIdx, CurrFiles, FileList
' Promt the User to select the ASCII files to load with a File Dialog
FileListPath = AutoActPath & "FileDlgList.asc"
Set fso = CreateObject("Scripting.FileSystemObject")
StartIdx = 0
ReDim FileList(0)
Do ' Until (DlgState = "IDCancel")
Call FileNameGet("ANY", "FileRead", DefaultDir, ExtFilter, FileListPath, 1, Msg)
IF (DlgState = "IDCancel") THEN Exit Do
' Read in the saved list of file(s) selected in the File Dialog into FileList()
**** This next line is where the ERROR happens *******
Set f = fso.OpenTextFile(FileListPath, 1, True) ' f.ReadAll returns file contents
CurrFiles = Split(vbCRLF & f.ReadAll, vbCRLF) ' turn file lines into an array
f.Close ' close the file
iMax = UBound(CurrFiles)
IF iMax > 0 AND Trim(CurrFiles(iMax)) = "" THEN
iMax = iMax - 1
ReDim Preserve CurrFiles(iMax)
END IF
Call BubbleSort(CurrFiles) ' sort the array of file names alphabetically
' Append current file dialog selection(s) to any previous file dialog selection(s)
IF iMax < 1 THEN iMax = 0
ReDim Preserve FileList(k + iMax)
FOR i = 1 TO iMax
k = k + 1
FileList(k) = CurrFiles(i)
NEXT ' i
IF MultipleDir <> TRUE THEN Exit Do ' forces only 1 dialog, good if all desired files are in the same folder
Loop ' Until (DlgState = "IDCancel")
GetFilePaths = FileList
End Function ' GetFilePaths()
266 6:18:34 PM Error:
Error in <NoName(1).VBS> (Line: 8, Column: 1):
Error in <Importing Multiple Data Logs_CaltermIII_Local.VBS> (Line: 140, Column: 5):
Permission denied
I can send the script and file I am loading if that would help.
Solved!
Go to Solution.Jcheese,
I understood that if you call this script within DIAdem you don't get any error, however, when you run that script from another source (with DIAdem opened) for the second time you get the error, right?
If this is the case, I think it might be that the file haven't close correctly in the script. Could you upload the script file?
Carmen C. -
Cannot access desktop/finder/trash... itunes locked error msg?
I suddenly can't access these 4 things: desktop/finder/trash/itunes.
I was throwing away files, and wonder if I accidentally threw something important away?
With itunes, i get an error msg saying:
"The iTunes Library file is locked, on a locked disk, or you do not have write permission for this file."
No idea.Try running Repair Permissions in Disk Utility.
Maybe you are looking for
-
CM Services stand alone (Unknown session NWDI and grey components in NWDS)
Hello. We are trying to configure NWDI in portal 7.3 using the following document http://scn.sap.com/docs/DOC-14706 however when Im trying the syncrhonize step (page 22) it shows me an error HTTP 400 Unknown session wherever I click in the sync pag
-
HOw to assign keyword to a group of photos
Apple Pro training series advises to assign keywords to multiple photos, to simply use CMD A to select all photos, then drag keyword over one of the photos and it should be assigned to all. When I do that the keyword is only assigned to the one phot
-
New Parallels Release Corrupted prop sys.dll--Can't logon to Win7 now.
Yesterday I downloaded and installed the latest Parallels 9 release. Afterwards, I got an error on Win7 login that said "C:\Windows\System32\PropSys.dll is either not designed to run on Windows or it contains an error". The login screen for Win7 wo
-
Calling a Function node in a DLL to give force-feedback effect to a joystick (using DirectInput)
Hello, I have been working for a couple of weeks on writing a DLL in Visual C++ Studio. My intention is to write an exported function in the DLL to initialize a Logitech Force3Dpro joystick, setup a force feedback effect and run it using DirectInput.
-
Jboss compatibility with Solaris 10
Hi, Did anyone install Jboss 3.2.6. on Solaris 10? I still did not decide whether should I install this version or the newest.