Customized smartform decimal display error for USD currency

Hi All,
I have customized PO smartform. the vendor currency is USD and out of 4 po line items, only 1 Item is displaying wrong decimal.
Say: it should display 28,089.00 but that line item displaying 28.089,00.
But all other item are displaying correct decimals like 28,089.00.
Please advise.
ANu.

Check in debug mode what values are there in the internal table.Check the format. Plus lets say i have 2 line items of different currency and i am using the above mentioned steps then it can happen
Nabheet

Similar Messages

  • Editable alv: add custom validation and display "errors" in protocol list

    Hi,
    What I want to do:
    PAI validation of editable alv with displaying error's in the protocol list by adding custom entries to the existing protocol object.
    What is my problem:
    After registering "data_changed event", the protocol list don't appear.
    My understanding is, that the object "er_data_changed" is passed by the event "data_changed"
    an so I thought I can add some more entries to the protocol list.
    After "de-registering" the "data_changed" event, the protocol appears with the standard errros messages (e.g. "input to numeric" by enter charachters)
    One more hint:
    By creating a new object "er_data_changed" in the handler method the protocol list works, but I would like to append entries to the object that was passed with the event.
    Probably I've misunderstand something, please help !
    My coding:
    PAI:
    trigger event "data_changed" -> calls handler method
      CALL METHOD r_myalv->check_changed_data
        IMPORTING
          e_valid = is_valid.
    stop processing
      IF is_valid NE 'X'.
        MESSAGE 'invalid input' TYPE 'E' .
      ENDIF.
    handler method:
    handle_data_changed FOR EVENT data_changed  OF cl_gui_alv_grid  IMPORTING e_ucomm
                                                                                    er_data_changed.
    METHOD handle_data_changed.
        data: ls_mod_cell type lvc_s_modi.
         CALL METHOD er_data_changed->add_protocol_entry
                    EXPORTING
                           i_msgid     = 'SU'
                           i_msgty     = 'E'
                           i_msgno     = '000'
                           i_msgv1     = 'This is a test !'
                           i_fieldname = ls_mod_cell-fieldname.
         er_data_changed->refresh_protocol( ).
         er_data_changed->DISPLAY_PROTOCOL( ).
    ENDMETHOD.                    "handle_data_changed

    Dear Olaf,
        If understood correctly, you want to Edit an ALV and do some data validations when some data is changed in an ALV.   To do this follow the following steps:
    1.   Before displaying ALV, Register the edit event.
    * Set cell modified to trigger data_changed
    CALL METHOD go_alv_grid->register_edit_event
    EXPORTING
    i_event_id = cl_gui_alv_grid=>mc_evt_modified.
    2.  Register the event DATA_CHANGED of class CL_GUI_ALV_GRID & handle the event.
    SET HANDLER lo_event_receiver->handle_data_changed FOR go_alv_grid.
    The event DATA_CHANGED of class CL_GUI_ALV_GRID has a parameter ER_DATA_CHANGED which is of type CL_ALV_CHANGED_DATA_PROTOCOL.
    This er_data_changed has internal table MT_MOD_CELLS(contains index of records changed ) & MP_MOD_ROWS(contains the changed row), using these update your internal table accordingly.
    DATA : wa_mod_cell TYPE lvc_s_modi.
    FIELD-SYMBOLS: <fs> TYPE table.
    LOOP AT er_data_changed->mt_mod_cells INTO wa_mod_cell.
    ASSIGN er_data_changed->mp_mod_rows->* TO <fs>.
    READ TABLE <fs> INTO wa_output INDEX wa_mod_cell-tabix.
    MODIFY lt_output FROM wa_output INDEX wa_mod_cell-row_id.
    ENDLOOP.
    3.   Here it self you can do the required data validations(No need of any PAI modules) as below.
    IF wa_orders-zfstfirmtyp = c_9.
    MESSAGE s288(zcsp).
    DELETE er_data_changed->mt_mod_cells.
    EXIT.
    ENDIF.
    Regards
    Kesava

  • Extractor 0EC_PCA_1: incorrect value for BALANCE field for USD currency

    Hi Gurus/Experts,
    We have a standard extractor in ECC side: 0EC_PCA_1 wherein USD currency (CURRTYPE/Currecny type = 30) is giving out a sum value for Accumulated Balance field of -300,962.66 for Plant A. I checked on its corresponding EUR value (CURRTYPE/Currency type = 10) it is giving out a sum value of +4,060,629.43 as shown below.
    Plant
    Fiscal year/period
    Currency Key / Type
    Accumulated Bal(BALANCE)
    Plant A
    2011/005
    EUR / 10
    +4,060,629.43 <--Balance is summation value
    Plant A
    2011/005
    USD / 30
    -300,962.66 <--Balance is summation value
    Logically thinking, if we sum up all of the accumulated balance and result is +4,060,629.43 in Euro, it should appear also as +USD after summing up the accumulated balance in the corresponding currency. But given this scenario, we are getting a negative result for USD value. I already checked the exractor on how is the Accumulated balance is being populated on ECC side but unfortunately, did not find any luck. I was not able to validate the records of Accumulated balance with the source table GLPTC as I don't have that much experience on the ABAP side.
    As for my questions:
    1. How is the currency conversion works on this extractor for Accumulated Balance field?
    2. How is the value for Accumulated Balance derived?
    Please take note also that isue rises at ECC side so I did not include the data flow on BW side.
    Thanks!

    Decided to use Generic Extractor on GLPCA

  • Page cannot display error for external user(via aproxy server)

    When i click the self service web application via proxy server.
    Following error thorugh
    Error : Cannot Display Page
    You cannot complete this task because one of the following events caused a loss of page
    data:
    Your login session has expired.
    A system failure has occurred.
    To proceed, please select the Home link at the top of the application page to return to the
    main menu. Then, access this page again using the application's navigation controls (menu,
    links, and so on) instead of using the browser's navigation controls like Back and Forward.
    Intenally the self service web application is working , Only External(via proxy server(DMZ))
    user only not accesible.
    External user only got the error.
    Thanks
    M.Soundrapandian

    Hi,
    Please do the same practice after enabling debug, it should collect more information about the error.
    Note: 249669.1 - How To Collect Apache and Jserv Debugging Details For Applications 11i
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=249669.1
    Regards,
    Hussein

  • Error for hard currency

    Hi experts,
    I'm trying to create a new company and fixing the country Pakistan (PK), also select the currency PKR (Pakistani Rupees).
    When I try to save then I receive the error "Country PK does not store a hard currency".
    Can anybody let me know, what does it mean and how can I resolve it?
    Appreciate for your response.
    Thanks

    Country IN does not store a hard currency while editing company code data

  • "HDCP content won't play on this display" error for all purchased content after upgrading to Yosemite

    Using my 2013 Mac Pro with a 27" Cinema Display, I'm now getting an error that tells me that my display isn't authorized for HDCP content.
    This is the same machine I've been using right along to watch my iTunes content with no configuration or hardware changes... the only difference is the switch to Yosemite and the accompanying iTunes upgrade.
    I've tried the basics - rebooting, reconnecting the display etc - but based on the circumstances it feels more like a bug than something I'll be able to impact.
    Anyone?

    The issue is from Safari defaulting to HTML5 vs using Silverlight like it did in Mavericks.
    So the options are, if you want to use Safari goto your Netflix account, playback preferences and turn off HTML5. This will revert to Silverlight and will AirPlay fine*in Safari.
    If you want to use HTML5, just leave the setting for HTML5 on in Netflix and use Chrome, Firefox, etc.
    You can't currently have both Safari and HTML5 Netflix when using AirPlay. You'd think Safari would be a little bit more powerful with Apples stances on browser extensions.

  • How to display Error for a particular text box programaticaly

    Hello All,
    I have 5 text boxes in a form and I have a requirement where if user click on any of the text boxes then i need to pass the id to class A and show the error description related to that text box in faces message.
    I have created class A in which i need to pass the id and get the error description but the problem is that the error description is in array list so i have created list of type class B which contains description.
    Right now in class A I have :-
    id ||||||||| description <>
    it1-------1.Invalid number
    -------2.Number not in use
    -------3.Number is out of range
    it2------1.error1
    2.error2
    3.error3
    and so on.....
    *public class ClassA {*
    public String Id;
    public List<ClassB> desc = new ArrayList();
    *public ClassA() {*
    super();
    *public void setId(String Id) {*
    this.Id = Id;
    *public String getId() {*
    return Id;
    *public void setDesc(List<ClassB> desc) {*
    this.desc = desc;
    *public List<ClassB> getDesc() {*
    return desc;
    *public class ClassB {*
    public String Description;
    *public ClassB() {*
    super();
    *public void setDescription(String Description) {*
    this.Description = Description;
    *public String getDescription() {*
    return Description;
    How do I pass the id and get the description for eg:- If id is it1 then How would I show all the 3 errors in faces message on value change.
    Please Suggest.
    Thanks in advance.

    your case is not clear.
    but this link may help you
    http://mjabr.wordpress.com/2011/08/31/how-to-show-multi-lines-afmessage/

  • Automatic payment program for USD

    HI,
    Can any one share the steps to configure  automatic payment program for  USD currency.
    I have done APP for  advance pyment/ clearing invoice/Terms of payment.in INR ... but wanted to know  how to make the payment to customers
    what would be the scenario where we make the payments to customer.
    Regards,
    kamal

    Hi,
    First you have to define House Bank for USD payment and assign sub bank account id for House bank,
    2. The Payment method which you are using  for USD payment should tick as foreign currency allowed in payment method in company code.
    3. In 'Bank Determination' button   Please assign Ranking Order to payment method currency and house bank as per your organization's requirement.
    4. On Bank AccountsType in your House bank name and House bank Account id and G/L account for Bank sub-account
    5. On Available Amounts  provide details as required as per house bank and account id.
    It will solve your problems.
    Regards
    Pawan Gupta

  • For the currency code  ALE communication is not allowed

    Hi,
    I am executing the transaction for - International Payment Medium Payment orders by EDI .
    On executing this t-code I am getting this error "For the currency code  ALE communication is not allowed" .
    Please help me resolve this issue.
    Thanks.
    Hemanth

    Hi,
    Check if SAP Note 758433 can help?
    Regards

  • Error in customized smartform for goods recipt

    Hi experts
    I  have  created a customized smartform for goods recipt .
    I have used  form entry_we01 inside my zprogram and basically  fetching the material document no from  NAST-objky
    The problem is when i assign my program in TXN NACE
    it prevents the update of material document no MBLNR in the
    MSEG table .
    I get an express document as soon as I try to display the goods recipt stating " UPDATE HAS BEEN TERMINATED".
    and although material document has been generated it is not updated in the MSEG table.
    By the way this error does not happen when i use the standard driver program and standard form (SAPSCRIPT).
    Please suggest a solution

    Hi,
    Your problem may not be related with what you done in NACE.......Check for any other recent changes made in the System...

  • Do NOT display decimal points for 1 currency

    Dear Friends,
    i have a report which shows the revenue of all countries. we have a target currency (variable) in the report.if we give that target currency as EUR, it changes al currencies into EUR. similarly if we give USD, the report will change all currencies to USD with decimal points
    But the requirement here is, for all other countries, the decimal points shud get displayed for the revenue, but only for Korea curreny (WON) the decimal points shud not be dispayed.
    in the table TCURC, for Korea it is maintained as " whole numbers only ".
    is there a way to achieve this??
    Rgds.,
    ASha

    Hi Yogesh,
    Thank you for ur reply.
    in the report, i have 10 keyfigures. 4 are being picked up from the report and they have currency translation variable. The rest 6 are formulas. On these formulae, i restricted the decimal display to "nothing defined". it works fine for all the 6 formulae. for WON it does NOT show decimals and for the rest of the currencies, it shows decimals.
    but how this can be achieved on the 4 direct keyfigures??
    Rgds.,
    ASha

  • Display custom SMARTFORM(PDF) not Adobe Interactive on Portal.

    Hi All,
         I appreciate any direction that you are able to provide.
    The scenario is as follows:
    The client is currently running SAP R/3 ECC 6.0
    The client is implementing ESS/MSS.
    A custom SMARTFORM was created in SAP
    The question is:
    What is the necessary code required in the Model/Application to Display this form?
    I have searched the web and found some documentation, but it is incomplete and I receive errors in the NWDS.
    Thanks is advance!
    The following code was placed in the Init method.
    public void wdDoInit()
        //@@begin wdDoInit()    
        Ynag_Test_Pdf_1_Input input = new Ynag_Test_Pdf_Input();
        wdContext.nodeYnag_Test_Pdf_Input().bind(input);      
        try {                       
                wdContext.currentYnag_Test_Pdf_InputElement().modelObject().execute();
                } catch (WDDynamicRFCExecuteException e) {
                            e.printStackTrace();
                            wdContext.currentContextElement().setSdfgdsfsd(e.getMessage());
                }            wdContext.currentInternalElement().setUrl(convertXStringToUrl(wdContext.currentOutputElement().getBin_File()));          
        //@@end
      //@@begin others
      public String convertXStringToUrl(byte[] doc_content){
                String url = "";
                WDWebResourceType webResType = WDWebResourceType.PDF;
                IWDWebResource webResource = WDWebResource.getWebResource(doc_content, webResType);
                try {
                            url = webResource.getURL();
                } catch (WDURLException e) {
                            e.printStackTrace();
                return url;
      //@@end

    Hi Chintan,
         Good morning. Thank you for your time and advice. While I have been programming in ABAP for over 15 years, I have not had to write SAP style JAVA before. I have written JAVA programs, but not using the NWDS. So that would lead me to ask the next question.
    How would I do something like that?
    Please advise.
    Kind Regards,
    Daniel A. La Mendola

  • Help!!! - When Creating Customer  I get this ERROR "Provide a positive integer for minimum customer balance amount or percent when balance amount overdue type is amount or percent respectively."

    When Creating Customer  I get this ERROR "Provide a positive integer for minimum customer balance amount or percent when balance amount overdue type is amount or percent respectively."
    I tried troubleshooting when I saw the another post and created with a new customer profile class, but still getting an error, though I created another profile like below and attached this to another existing customer it worked, but when I tried creating a new customer it is still giving me the error. I am Using Oracle Applications R12.1.1
    Steps I followed in Creating a New customer Profile
    ==== Make sure the new Customer Profile class which you will create is in active state. Cross check below steps while defining a customer Profile class.. e.g. Name : DEFAULT (and it's active)
    *1) Profile Class Tab :*
    a) Balance FWD Billing : Not enabled
    b) Invoicing --> Tax Printing ( Summarize By Tax Name), Grouping Rule (DEFAULT)
    c) Set Terms as per ur requirement , do allow discount & Override terms
    d) Set Dunning as per your requirement,
    e) Filled in Collectors info as per your requirement with Credit Check enabled...
    f) Receipt --> Auto cash Rule set as 'Standard'..
    *2) Late Charge Profile* Set it as per requirement
    *3) Profile Class Amounts* e.g Say Currency set as "USD"
    a) Credit Limit : 100000
    b) Order Credit Limit : 100000
    c) Minimum Receipt Amount : 1.00
    d) Min statement amount : 1.00
    e) don't put any value in Exchange Rate type (e.g, monthly, Plan etc..)
    f) Minimum Customer Balance : Amount ------> Value: 5.00
    g) Minimum Invoice Balance : Amount ------> Value: 5.00
    h) Minimum Charge per invoice : 1, Maximum Charge per Invoice : 100 Under Interest Charge
    i) mention Type as Fixed Rate, Value : 10
    j) You can avoid setting the Penalty Charge for the time being..
    Step-2_ a) Open a customer ..*go to Bill to site details* --> Click on Profile Tab --> Under Profile Class field please include new profile class which is created by you (e.g DEFAULT) . b) Go to Profile Amounts Tab --> Click(Show) on Currency USD --> Verify the set up here as well   I could see this.
    When I tried creating an new Customer using the new profile, it's repeating the same error. Please help.

    Hi
    You get this error when profile class amounts are not set for all the currency.  Go back to your profile and ensure that the profile amounts are set for all the currencies found, whether you are using it or not.
    Regards

  • BDC  display Error while converting the Currency ..

    Hi,
    Using BDC i have to cal Transaction Vk15.
    In this we have a field KONP-kbetr, which is a currency feild, with 2 decimals.
    I have to converted the Currency to 'EUR' and has moved it in a variable "gv_char13".
    ______________+declaration part+_____________________
    Data :  gv_eurconv_vk(14)      TYPE rkb1k-exchr,
               gv_eurconv_vk       TYPE konp-kbetr,
                 gv_char13(14) TYPE c.
    _____________+Currency Conversion+________________
      CALL FUNCTION 'RKC_SINGLE_EXCHANGE_RATE_GET'
        EXPORTING
          datum               = gv_sydatum
          kurst               = 'P'
          ncurr               = 'EUR'
          vcurr               = 'CZK'
    IMPORTING
       exchr               = gv_exchr_vk
       EXCEPTIONS
         no_rate_found       = 1
         OTHERS              = 2
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      WRITE gv_exchr_vk  NO-GROUPING CURRENCY 'EUR'.
      MOVE gv_exchr_vk TO gv_eurconv_vk.
      CLEAR gv_char13.
      WRITE gv_eurconv_vk TO gv_char13.
    _________+Passing Value IN BDC VK15+__________
        wa_bdcdata_vk-fnam     = 'KONP-KBETR(01)'.
        wa_bdcdata_vk-fval     =  gv_char13.                     
        SHIFT  wa_bdcdata_vk-fval LEFT DELETING LEADING space.
        APPEND wa_bdcdata_vk TO gt_bdcdata_vk.
        CLEAR wa_bdcdata_vk.
    ----------+Calling the Transaction VK15+____
      CALL TRANSACTION 'VK15' USING gt_bdcdata_vk  MODE 'E' MESSAGES INTO gt_bdcmsg_vk.
    **--Display the error message if the call transaction fails--**
        IF sy-subrc EQ 0.
          IF NOT gt_bdcmsg_vk IS INITIAL.
            READ TABLE gt_bdcmsg_vk INTO wa_bdcmsg_vk INDEX sy-index.
            CALL FUNCTION 'FORMAT_MESSAGE'
              EXPORTING
                id     = wa_bdcmsg_vk-msgid
                lang   = 'EN'
                no     = wa_bdcmsg_vk-msgnr
                v1     = wa_bdcmsg_vk-msgv1
                v2     = wa_bdcmsg_vk-msgv2
                v3     = wa_bdcmsg_vk-msgv3
                v4     = wa_bdcmsg_vk-msgv4
              IMPORTING
                msg    = gv_text_vk
              EXCEPTIONS
                OTHERS = 0.
            IF sy-subrc EQ 0.
              APPEND  gv_text_vk TO gt_mess_vk.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDLOOP.
    **--Display the error message on the screen--**
      IF NOT gt_mess_vk[] IS INITIAL.
        LOOP AT gt_mess_vk INTO wa_mess_vk.
          WRITE:/ wa_mess_vk.
          CLEAR wa_mess_vk.
        ENDLOOP.
      ENDIF.
    In the dispaly tabkle for error message "gt_bdcmsg_vk" we get the sucess message and in table "gt_mess_vk" we get the message as the "Condition records Saved."
    The problem is when this report is executed it displayes the converted currency Value and in next line it dispalyes the ""Condition records Saved".
    But idealy the converted currency value should not be dispalyed.
    Actual Sample display:(shuld be this ):
    xyz.. message
    Condition Record Saved.
    Sample display (Error Dispaly ):
    xyz.. message
      3,14E-02 -
    (This shuold not be dispalyed)
    Condition Record Saved.

    Use modified code...
    *______________declaration part_____________________
    Data :  gv_eurconv_vk(14)      TYPE rkb1k-exchr,
              gv_eurconv_vk       TYPE konp-kbetr,
                 gv_eurconv_vk TYPE p DECIMALS 2,
                 gv_char13(14) TYPE c.
    *_____________Currency Conversion________________
      CALL FUNCTION 'RKC_SINGLE_EXCHANGE_RATE_GET'
        EXPORTING
          datum               = gv_sydatum
          kurst               = 'P'
          ncurr               = 'EUR'
          vcurr               = 'CZK'
    IMPORTING
       exchr               = gv_exchr_vk
       EXCEPTIONS
         no_rate_found       = 1
         OTHERS              = 2
      IF sy-subrc  <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    WRITE gv_exchr_vk  NO-GROUPING CURRENCY 'EUR'.
    MOVE gv_exchr_vk TO gv_eurconv_vk.
      gv_eurconv_vk = gv_exchr_vk.    
      CLEAR gv_char13.
      WRITE gv_eurconv_vk TO gv_char13.
    *_________Passing Value IN BDC VK15__________
        wa_bdcdata_vk-fnam     = 'KONP-KBETR(01)'.
        wa_bdcdata_vk-fval     =  gv_char13.                     
        SHIFT  wa_bdcdata_vk-fval LEFT DELETING LEADING space.
        APPEND wa_bdcdata_vk TO gt_bdcdata_vk.
        CLEAR wa_bdcdata_vk.
    Calling the Transaction VK15____
      CALL TRANSACTION 'VK15' USING gt_bdcdata_vk  MODE 'E' MESSAGES INTO gt_bdcmsg_vk.
    *Display the error message if the call transaction fails*
        IF sy-subrc EQ 0.
          IF NOT gt_bdcmsg_vk IS INITIAL.
            READ TABLE gt_bdcmsg_vk INTO wa_bdcmsg_vk INDEX sy-index.
            CALL FUNCTION 'FORMAT_MESSAGE'
              EXPORTING
                id     = wa_bdcmsg_vk-msgid
                lang   = 'EN'
                no     = wa_bdcmsg_vk-msgnr
                v1     = wa_bdcmsg_vk-msgv1
                v2     = wa_bdcmsg_vk-msgv2
                v3     = wa_bdcmsg_vk-msgv3
                v4     = wa_bdcmsg_vk-msgv4
              IMPORTING
                msg    = gv_text_vk
              EXCEPTIONS
                OTHERS = 0.
            IF sy-subrc EQ 0.
              APPEND  gv_text_vk TO gt_mess_vk.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDLOOP.
    *Display the error message on the screen*
      IF NOT gt_mess_vk[] IS INITIAL.
        LOOP AT gt_mess_vk INTO wa_mess_vk.
          WRITE:/ wa_mess_vk.
          CLEAR wa_mess_vk.
        ENDLOOP.
      ENDIF.

  • Sales Order form error  "Not able to retrieve Display values for Service"

    Hi,
    Few of our orders flash the below error message when the order is queried
    "Not able to retrieve Display values for Service"
    Below are the points I observed
    1.The orders I am referring to are imported order via EDI interface.
    2.The service reference type code has value of ORDER, however no other service related fields (like service reference line id) have any values.
    3. The item is not a service item (service tab in Item setup is disabled)
    4. Same item when imported with value of "Customer Ordered" in "service reference type code" field, does not throw an error.
    5. If I update "service reference type code" with value null or change it to CUSTOMER_PRODUCT, the error disappears.
    Can someone explain the significance of this column value and what could have been causing this error message?
    May be there are some dependent fields/setups which must have a value when service reference type code =ORDER.
    Thanks in advance,
    JC
    Edited by: user10174990 on Oct 25, 2012 10:58 AM

    Hi,
    Maintain the dafault values using Tcode OISF with respective to Planning Plant you have to maintain the following values like Order Type, Main Work Center, Maint. Plant,Group,Group Counter,Business Area & Task List type.
    or
    Apply these OSS note 150732 / 195993.
    regards,
    Venkatesan Anandan

Maybe you are looking for

  • How to place a tone into the Alert (text) Tone folder iOS7?

    I made a custom tone that I want to use for as a new alert tone on my iPhone. I got it formatted and into my tones in itunes and synced it up. The new tone gets put under ringtones vs alert tone. Is there a way to get that tone to be place into the c

  • Why can't i convert itunes into an mp3 format?

    I looked on Apple's website for information on how to convert itunes into a mp3 format on your windows pc. I followed each step. I clicked on Edit and Preferences and set it to Mp3 converter. I then selected the songs I wanted to convert into. Then I

  • Is there a way to download data into CSV format?

    Is there a way to download data into CSV format? I can't do this using delimiter as ',' because user wants the decimal format in the ','s only. Any suggestions?

  • Button in standard selection screen...

    hello All, I am using PNP logical database and i have modified the standard selection screen for PNP. But now there is a button that appears , although the rest is supressed as i wanted it to. Our forums active contrubutor suresh datti has provided m

  • Needed classes for sap connector framework

    Hello, when i installed sap netweaver developer studio 2.0.5 i become all needed classes for sap connector framework? Or i have to install the pdk? What are in the pdk for developer studio because the needed wizards are there (portal, sap connector .