Sales Order form error "Not able to retrieve Display values for Service"

Hi,
Few of our orders flash the below error message when the order is queried
"Not able to retrieve Display values for Service"
Below are the points I observed
1.The orders I am referring to are imported order via EDI interface.
2.The service reference type code has value of ORDER, however no other service related fields (like service reference line id) have any values.
3. The item is not a service item (service tab in Item setup is disabled)
4. Same item when imported with value of "Customer Ordered" in "service reference type code" field, does not throw an error.
5. If I update "service reference type code" with value null or change it to CUSTOMER_PRODUCT, the error disappears.
Can someone explain the significance of this column value and what could have been causing this error message?
May be there are some dependent fields/setups which must have a value when service reference type code =ORDER.
Thanks in advance,
JC
Edited by: user10174990 on Oct 25, 2012 10:58 AM

Hi,
Maintain the dafault values using Tcode OISF with respective to Planning Plant you have to maintain the following values like Order Type, Main Work Center, Maint. Plant,Group,Group Counter,Business Area & Task List type.
or
Apply these OSS note 150732 / 195993.
regards,
Venkatesan Anandan

Similar Messages

Restricting Sales Order Form header notes appearing on delivery header

Hi,
Can someone please advice as to how to we can restrict the sales order form header text appearing on the delivery header?
Thanks
Keshi

Dear Keshi
In VOTX find out the procedure for your sales order header and Delivery header
Go to delivery procedure for header you will find Text Id (which you want to remove in delivery header) which is also present in sales order header.
Remove that text id from the procedure .
Please check if that procedure is not used for other deliveries, if it is used than define new procedure for your deliveries.
Regards
Jitesh

NOt able to get text value for 0calmonth in the query

hi,
I am not able to get the test for the calmonth in the selection screen of the Query.
i.e If the user enter the value 01/2010 as input in the selection screen. I am not able to get its text Janurary 2010 displayed in the selection screen of the query.
please let me know what could be the reason for this.
regards,
Mahesh

Hi Mahesh,
I regret to inform you there is no option to display the month text.
The system works as designed. The "Key and text" option for the
infoObject is for display the technical name and the description.
I found a customer on SDN which the same doubt and the answer for your
question. Please, check the link below:
0calday text variable
Best Regards,
Des

Hi There, I'm not able to Get the value for echo %cust_top% for custom dev

Hi,
Before doing any thing in dos usually i run envshell
Which let me to switch to product specific location through Appl_top, au_top etc
I'm Sending Out Put At cmd Prompt Please Check
D:\oracle\visappl>echo %ar_top%
d:\oracle\visappl\ar\11.5.0
but not able to work for custom development.
D:\oracle\visappl>echo %cust_top%
%cust_top%
D:\oracle\visappl>
Why it's so?
Bachan.

Hi There,
I got document, but not able to understand 2nd step i.e
"2) Add the custom module into the environment
Apply ADX.E.1 and add the entry to topfile.txt as a standard product top entry (follow the existing model in the file)
Customised environment variables can be added to AutoConfig by using the filename specificed by s_custom_file, which is then called from the APPSORA.env file.
If using Forms Listener Servlet, you may also need to add $CUSTOM_TOP to formsservlet.ini in $APACHE_TOP/Jserv/etc"
1. What is ment by ADX.E.1 and topfile.txt ?
2. And How can i add to "AutoConfig by using the filename specificed by s_custom_file, which is then called from the APPSORA.env file. " ?
3. And agin What is ment by "If using Forms Listener Servlet, you may also need to add $CUSTOM_TOP to formsservlet.ini in $APACHE_TOP/Jserv/etc"
Please Give a breaf note on this Question's.
Thanks Bachan

Item should not duplicate in sales order form in line tab ..

Hi All,
Not very sure this is the right forum for this if not please tell me the correct forum to post this.
We have a requirement(11.5.9) which we have to achieve it using custom.pll, as I am very much new to use it need help on this.
In Sales Order form once we enter in Lines Information TAB,
For example we will enter Item 'ABCD' at Line 1.1 then again at Line 2.1 if I try to enter the same item 'ABCD' it should pop up a message saying "Item Already Entered" once we press Tab on Ordered Item Field.
If we enter a different Item it should take as usual.
I will appreciate if some body posts the code for the same which we can do it using CUSTOM.pll
Thanks in Advance
Devender

If you are in the WHEN-VALIDATE-ITEM trigger, you cannot navigate back through the list of already entered records (especially if record you are in is not complete). It does delay the validation, but duplicate checks are typically done by querying the database on both WHEN-VALIDATE-ITEM and PRE-INSERT/PRE-UPDATE triggers. This means when entering a new Sales Order, you won't be warned that Line 2 has the same item as Line 1 until you save, but there are no navigation required to avoid issues such as trying to leave the current record before it is valid.

Issue while updating(Changing) quantity on line at quick sales order form

Hi,
I am facing a issue while changing quantity ordered on the order line in quick sales order form. (R12.1.3)
Although the same logic works exactly as required in 11.5.9.
There is a custom logic, post booking line status is Awaiting Shipping.
Now when quantity is changed +(Saved), the status changes to a custom state but at the same time a new row is created with the same line id but different reservation id in the MTL_RESERVATIONS.
The quantity here is the difference between the original quantity and the new entered quantity.
And post completion of the custom logic the original row is updated, but being there a additional row the quantity reserved at the shipping tab comes wrong.
Our requirement is of update which is happening but not the additional insert which is going into MTL_RESERVATIONS.
The logic is perfect in 11.5.9 and no additional insert is being made.
Kindly help and give some ideas for the possible reason the issue.
Please ask for more information if required.
Thanks,
Vishal

Hi Mahendra,
I have gone through the note id that you have given. sorry to say that, that is refering to diffrent issue.
Actually what i did is, At form header level, I have hide the fileds using the folder options. once after changes I have closed the form and re-opened it. by that time I can see that Button names got changed in bottom of the "Quick sales order form". Not sure how it become changed. there five buttons over the form, only two button names got changed.
Kindly suggest any other options.

When reducing qty in quick sales order form, reason field is non enterable

Hi,
When I am reducing the quantity of a booked sales order, its giving me message that "You must specify reason for the change" but reason field in quick sales order form is not editable. The same functionality is working fine in standard sales order form.

Check if 'Audit Trail' is setup in OM Parameters for the OU.
Also check if "Processing Constraints" are setup correctly.
For Qty reduction we need to add a new row called "delete".
Thanks
-Arif.

In Sales Order form Freight Charges form is not updating Freight

Hi,
In SAP BusinessOne(8.82) sales order form -> freight charges form not updating(filling) the freight in amount field.
It is working on 2007 version . can any one tell which tables to use to update the Feight .
Thanks,
Y.

Hi Yugandar.....
Update Freight means what?
Are you not able to put the freight charges manually?
Or you are trying to fill it programatically?
Regards,
Rahul

Value Set error msg when opening sales order Form

Hi
I created a value Set(where the values are populated at run time based on a view) which is attached to DFF (column eg Attribute13),The Value set would get value populated only if any sales order lines are cancelled, as the value of Attribute13 on cancelled line would be inserted to new Order Line.
The Problem is when ever the Sales order Form is opened it throws the error message
"Value XX For the FlexField Segment dosent not exists in the valueset (Valueset name)" as the oe_order_lines_all.attribute13 has value and the value set has null, it matches it and throw the above error.
Could you guys give any suggestion how to avoid it, or is there any workarould , Thanks
Thanks

This tells me that the same attribute is used for something else and there is a value in that the column that is not your table which you are validating against. Or the value you are setting is not in that table.
About the context: If the same attribute is used under a different context AND if that context gets set when you open the sales order AND if the validation type is different under that context for attribute13, you will get this error.
Thanks
Nagamohan

Release Sales Order form not functioning occasionally..

Hi All,
I regularly perform 'Launch Pck Release' for an order from Relaes Sales Order Screen in shipping. But some times I am not able to perform this transaction from this form. I have to navigate to 'Shipping Transaction' form and Launch Pick Release every single line.
This does not happen regularly and happens occasionally. There is no particular issue with Order Type or Part number. Please help me on identifying the cause of the issue.
Thanks,
user8956008.

Hi,
Your question : What is the difference between Release Sales Order Form & Shipping Transaction Form?
In Apps, Release Sales Order Form is basically used to move Material from Inventory to your staging area e.g stock yard (pick release activity), at this point the material is still inside your premises..
Shipping Transaction Form is basically used to move material from staging area to customer site..
Your 2nd question is : Pick Release can be done from both the forms.What is the difference.??
Through Pick release form you can do pick release where you don't need any grants... and to do the same through Shipping Transaction form you need to have access rights to do ship confirm and pick release.. In other words, Through Shipping Transaction form you can restrict/allow user to do pick release where as in Pick release form no such restrictions are there..
Shipping Transaction form is basically a combo package :) through which you can control Pick release, Ship confirm, Delivery etc..
For the Grants and Role you can check details under : Setup --> Grants and Role Definitions --> check Grants & Define Roles form..
Roles form will let you what are the actvities can be done and can be assigned to users..
Hope this will help...
Regards
S.P DASH
Edited by: spdash12 on Oct 27, 2009 10:43 PM

Error in Sales order - Consumption account not found

Hi Gurus,
I am facing an error in Sales order - 'Consumption account not found'. The scenario is third party. In sales order, it says 'Consumption account not found'. the item category is TAS and scedule line category has general modification key 'VKA'. And as it is third party, thr is no movement type for the schedule line category. The valuation class of the material is 3334 (software services). I was thinking In OBYC, under GBB key, this combination of my val. grping code+ 3334 + VKA and relevant GLs shud exist.
But in my development client, i dont get any error for the same material. And in thr also, thr is no mention of entry like above combination in OBYC. So its making me think that its not config error. But its an issue of master data or GL data.
Please help me . This is critical.
-Prashant

Hi,
Your observation is perfectly write, the possible errors are
1. Check the combination of Account modifier of Purchase order account assignmnet or PR. Based on the modifier and check the relevent combination in OBYC
Valuation ClassAccount ModifierIf Groups is there + Transaction Event Key + Gl Accounts
2. If GL Account is available then check the GL Master through FS00 for validation of mandatory consumption is required and i feel there is no issue with material master.
Rewards if it helps
Regards
Goutham

Change in an LOV query of Sales Order Form not working

Hi,
I wish to change the the Order Type (in the Sales Header) displayed in the Sales Order Form when viewed from a particular Responsibility.(11i Instance)
To be specific only certain order types should be displayed in the LOV when the User tries to create Order from that Responsibility.
In that process I created an FP with Action --> Builtin -->Create Record Group From Query
Then in Property-->Object Type-->LOV and Target Object -->ORDER_TYPE Value-->Name of my Query Group
I downloaded the Sales Order Form and modified the Query of the Group keeping the columns selected and the view used same and added in the Group I created.
But it didn't work out.
I tried out by changing my Target Object to SRV_ORDER_TYPE and its corresponding query from the Oracle Form.
But still it didn't work.
Please tell me where I'm going wrong.
Am I not choosing the correct target record group LOV?

Hi Robert,
I have successfully accessed a matrix using Visual Basic .Net. It has been quite a challenge while I was at it.
One important thing to understand is that (unless you access the datasource) in order to access a particular control in a matrix object, this control needs to be visible and enabled. It is like simulating a user accessing the matrix via GUI... if a control is not enabled, you cannot access it (as said via control). That might explain question 1.
Short sample on matrix handling is here:
http://www.itwiki.net/ow.asp?SboHowToReadFromAndWriteIntoMatrix
<b>Q2 - Cell count:</b>
I have personally never used the Cells count method. It should always return the number of rows. My only guess here is that you are using an old reference on the matrix object in which the rows are not there yet.
Dim oMatrix As SAPbouiCOM.Matrix
Dim oColumn As SAPbouiCOM.Column
Dim oEditText as SAPbouiCOM.EditText
oMatrix=YourSboForm.Items.Item(38).Specific
oColumn=oMatrix.columns.item(strColumnname).specific
oEditText=oColumn.items.Item(1).specific
Msgbox(oEditText.String)
The above code should get you the first cell of the first row of the given matrix.
HTH Lutz Morrien
P.S.: If you need any more sample code, check with the SAP matrix sample or send me a mail (adress see Http://www.itwiki.net)

Sales order stock does not exist error during PGI

dear sir,
we have two plants 1010 and 1020,we are using variant configuration for our finished goods
we want to make the sales orders in 1010 plant and we manufacture the machine in 1020 plant.
so we want to dispatch machine from 1020 plant (shipping point),eventhough we make sale order in 1010 plant.
but while doing PGI ,system shows one error message "Sales order stock does not exist" message 184,area M7.
if we see in MMBE stock of finished good is available in 1020(made 412 E movement)
how to resolve this
thanks and regards
srinivas pai

There can be two reasons for these kind of error
- Your sales doc while creating this order & your item category is marked with special stock indicator as E and after this order is created you have not reserved stocks in your plant against this order. This reservation can be done in tcode MB1B movement type 412 E.
- Let say, if it is reserved then check the same in tcode MMBE stocks reserved for your sales order.
Otherwise reservation you may have done properly with correct movement types with special stock indicator E. But while creating the your sales order with item category may not have been marked with special stock indicator E. In this case even though the system has stocks reserved for that order and that order when comes for PGI system doesn't sense.
In either of the case, you have to again do the process.
Hope it can assist you.
Thanks & Regards
JP

Adding Quantity in Sales Order form in 11i

I am trying to use forms personalization (under 11i) to add-up order quantity of multiple item lines to check against certain value. if it is less then let the order be booked, if it isn't then give error and stop processing. Will appreciate if someone can help, urgently.
I am able to check the quantity and preform the check at each line level but not able to figure out how to add up the quantity if there are multiple lines.
This is to be done in Sales Order form under Order Management.
Thnx
Suhail

Hi;
For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Application Development in PL/SQL » Forms which you can get more quick response
Regard
Helios

Pricing, Modifiers in Sales Order Form

Hi Gurus,
Please help me to resolve the issue with Pricing, Modifier to Sales Order:
I have created Master price List for Item A - $40
Modifer 1 - Dealer Discount Price is 20% (Created Modifier as Dealer Discount - 20%)
Modifer 2 - Order Header discount is 10% on total Order Value (Created Modifer with Discount : Level - Order; Modifer Type - Discount; Pricing Phase - Header Level Adjustments, Application Method - Percentage; Value - 10%
Assgined to respective Qualifers (Customers), set as Automatic
Ran Build Attribute mapping values concurrent program in Pricing Module. Status : sucess
After doing All above steps created Sales order for respective Customer, system is applying Modifer 1 Automatically but MODIFIER 2 not able to apply at order header leverl, Not able to see this Modifier list under SO form
Action->View Adjustment.
Can you please check and let me know the problem to achieve this issue.
Highly appreciate your response.
Regards
AK

Check below options in sequence
1) Is your order qualifies for both the modifiers ?
2) If you need to apply both modifiers put them in different incompatibility level.

Sales Order form error "Not able to retrieve Display values for Service"

Similar Messages

Maybe you are looking for