Cycle between patches

So this might be an obvious question, but I can't tell. I have mainstage set up to where I have a set for each song. I'm also using mainstage as a guitar rig, so each set has 2 patches in it, one for clean guitar, and one for distorted guitar. Then those patches are going through an aux channel with all of my effects. Each set also has a playback set up with backing tracks for that song. The problem I'm having is I'm using an FCB1010 foot controller to trigger the playback, as well as switch in between the patches. I will sometimes accidentally press patch up instead of patch down on the foot controller, and instead of cycling between the two patches in the set, it will go to the patch in the set above. This will immediately stop the playback and ruin the song. This has turned into a huge problem for me, and I'm wondering if there's any way to set it up so if I press patch up instead of patch down, instead of going up to the patch in the next set, it will just cycle between the two in the set I'm in. Anybody know how I can do this? Any help is greatly appreciated. Thanks.

I can't think of any clean way to do this within MainStage alone. You would really need to intercept incoming program changes, perform arithmetic to determine what to do with an incoming program change value and then send the appropriate program change into MainStage. For example, since you always have two items, assuming they're at locations (1,2), (3,4),....(2n-1, 2n), and you send in a patch up command, the processor could look at the current program number and if even, go down one, otherwise go up one.
It would be trivial to implement this with something like Max/MSP but unfortunately that's an expensive solution. I'm not sure if the free MidiPipe tool has enough functionality to do this but it might be worth checking.
The cynical side of me suggests more practice so you simply don't make the mistake (grin)

Similar Messages

  • [Solved] DWM Cycle Between Layouts

    Is there a DWM patch to let modkey+space cycle between layouts like in XMonad and Awesome?  I saw the thread here that suggests using cycle.c: https://bbs.archlinux.org/viewtopic.php … 18#p761018
    However, cycle.c allows cycling across tags rather than layouts.  Does anyone else know how to enable this functionality?
    Last edited by choogi (2010-08-30 17:20:01)

    sorry to bump this thread, but i too want the same behaviour as choogi, but can't seem to get bob127's suggestion to work.
    do i need to add this to dwm.c ?
    void
    nextlayout(const Arg *arg) {
    Layout *l;
    for (l=(Layout *)layouts;l != selmon->lt[selmon->sellt];l++);
    if (l->symbol && (l + 1)->symbol)
    setlayout(&((Arg) { .v = (l + 1) }));
    else
    setlayout(&((Arg) { .v = layouts }));
    void
    prevlayout(const Arg *arg) {
    Layout *l;
    for (l=(Layout *)layouts;l != selmon->lt[selmon->sellt];l++);
    if (l != layouts && (l - 1)->symbol)
    setlayout(&((Arg) { .v = (l - 1) }));
    else
    setlayout(&((Arg) { .v = &layouts[LENGTH(layouts) - 2] }));
    and i didn't understand about this, either:
    { .symbol = NULL, .arrange = NULL },
    sorry, i am new to c.
    EDIT: so i just looked at bob127's configs at his website, and added the code accordingly to my configs, and now cyclelayouts works great.
    Thanks bob, for the patch.
    Last edited by x33a (2011-01-14 10:59:49)

  • Hi I am having problems downloading and updating apps on my iPad and iPhone. The message cycles between waiting and loading then I get an error message saying unable to download app. Eventually,after many attempts it works.

    Hi Guys - for a few days I have been having problems downloading and updating apps on my iPad and iPhone. The message cycles between waiting and downloading then eventually says unable to download app. Sometimes after many attempts it wil eventually work. I tested it on an old iPhone 3G and got the same problem so it is not an iOS 5 issue. My WI-FI connection is working fine. I was wondering if this is an App Store problem? Anyone else in the UK having this problem?

    Hi John
    iTunes Support wasn't of any use to me.
    I have also been having another problem - with BBC iPlayer and other video streaming not working due to insufficient bandwidth, despite my overall download speed being consistently around 50Gb.  This is also affecting AppleTV downloads
    I am using Virgin Media as my ISP, and was wondering whether you do as well.  This might be the common thread.
    -Bernard

  • Auto show/hide Plug-in when switching between patches in Mainstage 2

    Hi, I was wondering if there is a way to have Mainstage 2 automatically reveal a plug-in when switching between patches. For instance, when switching to a Clav patch, have it reveal the EVD6 plug-in. Then, if you switch to a Rhodes patch, it automatically closes the EVD6 and reveals the EVP88.

    As far as I know, no. I haven't found a way to do this. It would be useful in certain setups.

  • Cycle between spaces in Mavericks automatically

    Hi,
    I run an app product team and receive lots of data, information, run builds and have various feeds from Twitter and Facebook.
    I am trying to rig up a mac mini with an external display so that I can show all this information on a 5 min loop.  Those items that are web based are straight forward as there is a great plug-in for Chrome called Tab Carousel.  However some of the information I have is in other apps, including Adobe, excel etc.
    The solution I can think of would be to put each data source or app in a different Mavericks space and cycle between them.  Does anyone know of a way/app that can do this?
    Thanks,
    Phil

    It worked for me with SQL*Plus 9.2 on Windows 2000 command
    prompt :-) I am only guessing from your use of "program files" you are using a variant of Windows.
    I can see in Oracle's bug database there have been a lot of
    little quirks with parameter quote handling in various versions
    on various platforms. This appears to be due to differences
    on various operating systems in the way that quotes are
    natively handled.
    Perhaps checking Oracle's bug database might reveal a work
    around. If there is nothing similar logged it would be good
    to log a bug so it can be addressed.
    -- CJ

  • Difference between Patches,Plugins,Adapter

    Hi ,
    Can you please suggest me difference between patches,plugins,and adapters.
    Thanks in advance
    Chimsi

    Hi,
    Patches are typicaly upgrades. For the DB, check things like
    http://help.sap.com/saphelp_webas620/helpdata/en/a2/f3f63def83c452e10000000a114084/frameset.htm
    Pls also check these for plugins:
    http://help.sap.com/saphelp_webas610/helpdata/en/09/170f3ad7ca6f26e10000000a114084/frameset.htm
    Adapters:
    http://help.sap.com/saphelp_webas630/helpdata/en/c0/afc033f9ef4e39b50e10e526c80699/content.htm
    Eddy

  • IPad cycling between Apple logo and Grinding icon endlessly

    I was tooling along using my iPad when a notice for updating to IOS 8.02 came up. Then without touching any buttons my iPad started rebooting.  I am cycling between the Apple logo and the working or grinding icon grinding then freezing.  I cannot turn the iPad off and the battery is almost totally depleted.  I tried to charge the battery overnight, but it is not charging.  Any solutions?  I went to iTunes to back up.  When the Apple logo is showing iTunes says it cannot back up because the iPad is locked.  it only recognizes the iPad when the Apple logo is showing

    If you can't get in any other way, you can try restoring using recovery mode first. If that won't work, maybe you can erase it and start over using find my iPhone.
    If you can't update or restore your iPhone, iPad, or iPod touch
    iCloud: Erase your device

  • Ipod touch 2g 8gb cycles between battery screen

    ipod touch 2g 8gb cycles between battery screen and logo scree. and does not startup suggestions why ?

    After charging for at least an hour I would try in order:
    - resetting the iPod:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restoring the iPod, first from backup and then to factory defaults/new iPod.  If iTunes does not see the iPod first try placing the iPod in recovery mode.  If still unsuccessful try placing it in DFU mode.
    for recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    For DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Business Cycle between a Customer/Buyer and Vendor/Seller

    Hello everybody,
    Can anybody send me a link which explains the entire business process involved between a customer and the vendor, right from creation of PR to delivering the products?
    Cheers,
    Deepak.

    Hi Deepak,
    In procurement scenario, assume that you have a company and you want to purchase some raw materials for manufacturing the end product.
    The stores manager in your store room realises that a particular raw material is going out of of stock (based on the inventory mngt rules) and hence he creates a request for purchase. This is called Purchase requisition creation in SAP.
    This PR will be now reviewed by the guy in procurement section. He will try to ask the production dept, whether this material is needed now. Based on the approval (PR release by release procedures), the procurement guy creates a Purchase Order on a Vendor. Once the PO is created, the softcopy of the same will be send to the vendor through email/fax/printout etc.
    Now the vendor will deliver the goods which will be received by the stores guy (Goods Receipt). Simultaneously the invoice from the vendor will be received by the Finance Dept(Invoice Receipt)
    Now the Invoice receipt will be compared with the PO, and if values and quantities are tallying , the amount will be paid based on the payment terms.So it is like
    PR-PO-GR-IR-Payment is the process cycle in procurement. Here the vendor, various depts in ur organisation plays the role.
    On the sales side, assume that you are owing a company, and you sell things. One of your customers want some materials from you.
    For this, he creates an Inquiry asking for some details about that material(price, delivery date etc)
    You will respond to that Inquiry by giving him a Quote(Quotation)
    Now the customer accepts your quotation for price, quantity, delivery date, other discounts etc and he finally creates an order for the material.
    Once you receive the order, you make the materials available, and you then deliver the materials to him (Delivery and Goods Issue)
    Subsequently you also send him an invoice.
    So the typical sales process will be like
    Inquiry-Quotation-Sales order--Delivery-Goods Issue---Invoice
    Though these are the basic processes in procurement and sales, there are lot of variations in these processes based on the business requirements.
    There are also functionalities in SAP that you can make one of your customers as a vendor of a service. For example you give consumable goods to a shop, but you buy some advertisement space in his shop.
    Hope the answer satisifies you.Pls lemme know if you need more info.

  • Every time i switch between patches they automatically mute?

    Hi I've recently started using Mainstage 2 and i've got my basic set up sorted and some sound i like. However every time i switch between the patches, it automatically mutes it which makes it pointless for me to use live as i'll have to keep going back to my laptop to unmute the sound and I like the idea of being able to let the previous patch ring out over the new patch.
    Any suggestions?
    Sam

    Hi
    Not exactly clear what you mean...
    a) Software Instrument patches normally do allow the sound of currently playing notes to carry over, unless you have specifically selected "Instantly silence previous patch' in the Patch attributes Inspector.
    b) Audio channels default to having a 20 second 'overlap'.. see Preferences:Audio
    c) or maybe you mean that when you change a patch, the previous patches channel strips are actually Muted?? This could be that you (accidentally) saved them that way, and the MS preferences are set to revert to the Saved state (Preferences;General:On Patch Change)????
    HTH
    CCT

  • Difference between patches

    Hi Guys,
    What is the difference between 10_SunAlert_Patch_Cluster and 10_Recommended.
    Thanks,
    Farhan

    Hi,
    Patches are typicaly upgrades. For the DB, check things like
    http://help.sap.com/saphelp_webas620/helpdata/en/a2/f3f63def83c452e10000000a114084/frameset.htm
    Pls also check these for plugins:
    http://help.sap.com/saphelp_webas610/helpdata/en/09/170f3ad7ca6f26e10000000a114084/frameset.htm
    Adapters:
    http://help.sap.com/saphelp_webas630/helpdata/en/c0/afc033f9ef4e39b50e10e526c80699/content.htm
    Eddy

  • Difference Between Patches And Support Packs

    Hi Experts,
    I have one doubt,
    1.... I want to Know Difference Between the Patches And the Support Packs
    2...What is the Use of these Two??????????Is it Necessary to Apply these Two??
    I asked This Question in Number of Queries...................
    Please Let me Know All the Above Mentioned Queries
    Regards
    Khanna

    Thank you  for ur Quick Reply Satish.
    And one more thing i want to clarify with you ...
    Here i am going to Install XI 3.0 with WAS 6.20.
    1......I installed j2sdk1.4.2_12
    2......Installed Oracle 9i
    <b>Question1:-</b> Do i need to Patch it to Oracle 9.2.0.7.0?????????
                              Or I can do it Later Also???????(At Present I dont Have it)
    I Installed Up to Here.
    3.....After this I wil  Install WAS 6.20 with ABAP + JAVA Stack
                                                                      ( I have Doc for this).......
    4....After this I wil Install XI 3.0
    I think this is the XI Installtion.....
    <b>Question2:-</b> Is this way of Installation is Correct?????
    <b>Question3:-</b>After Completion of All these We should do the XI Post Installtion...Right?????
    <b>Question4:-</b>  When can we Apply the Support Packs And Patches??????? In the Post Installation  Or After the Post Installation?????
    Please Give me the Right Direction To Install the XI Successfully.......
    Helpful ANS Wil be REWARD Points
    Regards
    Khanna

  • Difference between patch and upgrade

    hi,
    i need to know the exact difference between the patch that is available online and the upgradation of oracle. there is a patch 14 available for oracle 11.5.9 available. what does it do. is it similar to upgrading the oracle installation to a higher version.
    please reply as soon as possible.
    thank you in advance.

    Would you please elaborate more. What do you mean by the patch this is available only? What is patch 14?
    If you are running on 11.5.9 and want to upgrade to 11.5.10.2, then you need to apply 11.5.10.2 maintenance pack. Maintenance pack is a consolidation of all the mini packs for all products and all the family packs for the entire oracle applications.
    Have a look at the following link for Oracle Applications Patch Types:
    http://appsdbablog.com/blog/2006/10/oracle_applications_patch_type.html

  • Constant Cycling Between Palm/Acces​s screen.

     This started this weekend.  Phone started to cycle as stated between the two screens.  Did soft reset…no joy…warm reset/system reset… stopped cycling.  But  phone would be showing “off”  Could not get it to come on by pressing red button.  Tried dialing a number and it would show the “Do you want to turn phone on “ option, but when I press “yes”  Nothing happens.  Phone is still off..  I do a hard reset.  Phone works…But of course, none of my preferences are there or other software.   Did a Hotsync…Everything loads…But again…the cycling starts.  I already did the Sprint  755p update from this site   thinking that would fix it all, but no joy   (not much  joy here..period)   Any clues..blues?
    Post relates to: Treo 755p (Sprint)
    Post relates to: Treo 755p (Sprint)
    This question was solved.
    View Solution.

    What you need to do to make sure you are not sync'ing 3rd party apps, is to rename the backup folder in your username folder on the PC to backup.old The backup folder also contains your preferential settings on the Treo, call logs, etc. You will need to setup your Treo with your preferences again. Make sure there are no 3rd party apps in Quick install and sync the Treo. After you sync the data, use the Treo and see if it has the same issue. If it is working OK at that point, install 3rd party apps. one at at time and test the Treo after each install of the 3rd party apps.
    Click on the following link to the kb.palm.com webpage for the article regarding the username folder location.
    http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=26674
    Post relates to: Palm i705

  • HT4061 iphone cycling between apply screen and passcode screen

    My iphone is cycling uncontrollably between teh apple screen and the passcode screen.  Holding power button and home button for 10 seconds or more resets it temporarily but then the uncontrolled cycling begins again

    Connect iPhone to Wall Charger with Lightning Cable for 20 minutes. Then try Reset while on charger. If still problem, Restore iPhone with iTunes on computer. Make sure iTunes is up to date. Open iTunes on computer, connect iPhone to computer with Lightning Cable. Hold both Home and Power buttons until iTunes recognizes iPhone in Recovery Mode, this usually takes about 20 seconds of holding both buttons. Click the Restore button of iTunes. If still problem, make Genius reservation and take iPhone to Apple for resolution under Warranty.

Maybe you are looking for