DA - Working but errors appearing on the server

DA Server - Windows 2012 Datacenter
DA Clients - Windows 8 Enterprise running on Microsoft Surfaces
We have a strange situation where DA works for our clients but on the DA server under Operations Status an error is listed against the NLS Server - Network Location Server: Not working properly and then lists 3 possible reasons: Issue with the Certificate,
the NLS server website is unavailable or Operational Server availability cannot be determined.
Have attempted to run through the setup wizard, step 3 but when clicking finish comes back with an error saying there has been an issue and then carries out a roll back. Then I have to recreate the DNS entry because it deletes it from DNS.
The certificate we have generated is listed on the DA Server.
I have also noticed that the Clients show status as connecting under Workspace Connectivity rather than connected.
But I can ping the NLS server outside and other servers on our Domain. I can also access network resources with no issues.
Has anyone experienced the following errors as listed above but still have DA working?

Hi BenoitS
Thanks for the reply - sorry for not responding until now have only just seen your post.
Yes the NLS server is hosted on the DA Server.
Yes internal clients can connect to the NLS Web site and see the default splash screen.
We have logged a call with Microsoft to see if they can spread any light on the situation.
Unless you can suggest anything else?
Thanks
Peter

Similar Messages

Wireless works, but cannot connect to the server

So, I've spent all day trying to get my new printer to access Web Services so I can register it with the Claim Number. It will not access the server despite trying all the suggestions, even exposing my computer to the Internet demons by disabling my Firewall. Is there something else I can try or should I just return the product?

What printer? No model number mentioned. What OS?? Wired or wireless? Please detail your full installation procedure that was performed. Thanks.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HT1414 my iphone works, my mac works but my ipad says the server stopped responding. I can't open any apps on the ipad???

My Ipad does not have the server connected however my mac is working and so is my iphone. I have connected to the home server and it looks like it says that in settings. Does this have anything to do with my @me account? how do I get my ipad back working?

Try here > iOS: Troubleshooting Wi-Fi networks and connections

I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

I get nothing but error messages, -"Your IMAP server wants to alert you to the following: 113 that mail is not available" or 364? there are hundreds stacked up.You must give answers to how to fix these when we do "search" add the error code number

I get nothing but error messages, -
"Your IMAP server wants to alert you to the following: 113 that mail is not available" or the same with: 364?
Now there are hundreds stacked up on my desktop.
I cannot find the answer anywhere. You need to give answers to how to fix these errors because when I "search" "error code" or the number there is NOTHING. NOTHING! Yet you give us these stupid error codes
then you do not give us ANYTHING on how to fix these. These error codes make me so mad it makes me hate outlook, and hate the developers and hate microsoft. How in the world can you give us ERROR codes without the explanation of what
to do or how to fix it. You need to add each error code number in your "search" then explain what it is and how to fix it. I am not a tech. I am a lawyer. I have googled the entire string of error code and nothing is clear.
So, for the last several years, I get these error codes. Also, there is another error code that won't go away--it is the password error code that asks if I want to store the password. Yes, so I say YES. but it pops back. I am sick of this. This is the reason
I hate Microsoft and I love google. #1 they respond to error, #2 them try to fix them you do not. I paid the full price to buy the OUtlook 2010, almost $500 just to get outlook, and all I got was error codes. I could not even open it because all I would get
was that error codes and NO ONE knew how to fix them. WHAT IS YOUR PROBLEM that you cannot fix the stupid error codes that you imbed? PLEASE HELP

Hi,
I understand how frustrated you are when facing such an issue, maybe I can provide some suggestions on the problem.
Based on the description, you should be using an IMAP account setup in Outlook. As for the error message, usually it's caused by a corrupted message on the Server. I suggest you logon the Webmail site, check if sending/receiving emails works well.
If you find any unusual emails that cannot be read or sent, try deleting them to try again.
I also suggest you create a new profile to setup the IMAP account:
http://support.microsoft.com/kb/829918/en-us
Contact your Email Service Provider to get the correct and latest account settings, since you have been using Outlook for years, some settings may have been changed while you haven't been informed.
For the steps to setup an account in Outlook 2010, please refer to:
http://office.microsoft.com/en-001/outlook-help/add-or-remove-an-email-account-HA010354414.aspx
I hope this helps.
Regards,
Melon Chen
TechNet Community Support

HT5052 I have been trying to upate my ipod to 5.0.1, but every time i get an error message of the server timed out after downloading for over an hour. My broadband speed here is is 1.5mbs, not good any help?

I have been trying to update my ipod to the 5.0.1 but after waiting for a hour for the download i get an error message that the server has timed out as my broadband speed is not good, could this be the problem and if so how can i get the update?

I have the same problem I disable msconfig mode all the programs escept windows and apple products but the same error appears at the last second of downloading the update

I've been trying no update itunes 11.5 to iTunes 11.1.0 but this appears on the screen error NSURLErrorDomain -1102).(102

I've been trying no update itunes 11.5 to iTunes 11.1.0 but this appears on the screen (error NSURLErrorDomain -1102).(102)

I had the same thing. I quit the App Store app and tried it again and it worked... sort of. iTunes is telling me that I have the latest version of 11.1 installed, but I do not see the iTunes Radio button. Is it because this feature is not available in Canada yet?

In iphoto 6.06 I make the red eye changes, it appears to have worked, but when I open the pic again the red eye is back. Advice?

In iphoto 6.06 I make the red eye changes, it appears to have worked, but when I open the pic again the red eye is back.Advice?

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

In Numbers, I copied a worksheet and deleted the contents. The sheet I copied from has a header, I can't see it or bring it up when I'm working but it appears when I print the sheet. How do I delete it?

In Numbers, I copied a worksheet and deleted the contents. The sheet I copied has a header. I can't see it or bring it up when I'm working but it appears when I print the sheet. How do I delete the header?

Hi Cristina,
Headers are not shown in normal view.
Menu > File > Print to open Print View.
Hover the cursor over the Header to see the outline. Click and delete.
Regards,
Ian.

I used to use SpeedBit Video Downloader with Mozilla Firefox, but suddenly a problem happened, I can not download with it now at all as there is an code error appears in the bar of SpeedBit like "XML Parsing Error: unclosed token Location: chrome://browse

I used to use SpeedBit Video Downloader with Mozilla Firefox, but suddenly a problem happened, I can not download with it now at all as there is an code error appears in the bar of SpeedBit like "XML Parsing Error: unclosed token Location: chrome://browser/content/browser.xul Line Number 1, column 8702:....................."
I did evrey thing, but the same problem
reinstall SpeedBit, reinstall Mozilla Firefox.
So what can I do!
== This happened ==
Every time Firefox opened
== 4 days ago

look people, i may have a solution for this. This happened to me a few times before and resolved alone, but last time it happened was when i turned off my router and back on while my comp was running and appeared when i tried opening firefox after that. so wat i did was i shutdown the computer and the router and tried turning both on again, and it resolved.
Therefore, Summary: Shutdown computer then turnoff router then turn both back on
Hope this helps anyone.

I'm trying to connect to my work's VPN. I am connected to the VPN, but I cannot access the server. I keep getting a message that says the server may not exist or is unavailable. I know that's not the case because my coworkers are connected. Can someone

I'm trying to connect to my work's VPN. I am connected to the VPN, but I cannot access the server. I keep getting a message that says the server may not exist or is unavailable. I know that’s not the case because my coworkers are connected. Can someone please help me?

I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
No answers here, but you are definitely not alone with this issue.

Trying to sync my macs but getting this... error connecting to the server

trying to sync my macs but get this .....error connecting to the server,check server name or ip address ?????

Same problem . . . any resolutions out there?

Hello, i am having problems getting face time to work, I keep getting an error message saying the server could not process the registration, I am using the username and password I always have and it has always worked in the past, any ideas?

Hello, i am having problems getting face time to work, I keep getting an error message saying the server could not process the registration, I am using the username and password I always have and it has always worked in the past, any ideas?

We aren't Apple, just users like you volunteering to help other users with problems. Threatening to go to Samsung doesn't mean anything to us. What troubleshooting have you tried so far?

I try to run oracle sample,but error appear ,how can i avoid the error

after installing database and sample,i tried to run the sample ,but error appeared
D:\app\yu\product\11.2.0\dbhome_1\OCI\samples>bcmake.bat
Please set environment variable BORLAND_HOME
how to get borland compier?
why used borland compier? i think most developer use visual studio .
please tell me how to compile the given sample by oracle?
thanks
Edited by: user12070477 on 2013-5-8 下午8:44
Edited by: user12070477 on 2013-5-9 下午8:20

Check this support document for update and restore errors. Resolve iOS update and restore errors - Apple Support
Looks like that can be a hardware error, but go ahead and follow the other steps in the document.

HT4972 When I tried to update my iOS 4 ipad to iOS 6, it doesn't work but only say that the ipad software update server cannot be contacted. What should I do?

When I tried to update my iOS 4 ipad to iOS 6, it doesn't work but only say that the ipad software update server cannot be contacted. What should I do?

Hi Ruby,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting steps in this article helpful for troubleshooting the connection issue you're seeing:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Regards,
Jeremy

DA - Working but errors appearing on the server

Similar Messages

Maybe you are looking for