DAQ Express code reporting wrong DT.
All,
I have an odd problem where a bit of DAQ Express code is reporting the wrong DT consistently. This occurs with both the hardware device and a simulated device. I've attached screenshots detailing everything I found relevant to the problem as well as the source code.
You can download the files here.
http://sites.google.com/site/xkenneth/downloads
Regards,
Ken
Solved!
Go to Solution.
Hi Ken,
Thanks for posting to the NI Discussion Forums! From your pictures, I saw that you are using an NI-9239. From page 16 of the NI-9239 Operating Instruction and Specifications,
it explains that the valid rates for sampling are derived from the
timebase by first dividing this value by 256. Then, the value may
further be divided down by an integer value from 1-31. Thus, valid
sampling rates may be as high as 50 kS/s down to 1.613 kS/s when using
the internal timebase of 12.8 MHz.
In your case, you have specified a
sample rate of 300 S/s, which is much less than the lowest possible
rate of 1.613 kS/s. Therefore, the board is coercing this value up to
1.613 kS/s and the inverse of this is the dt value you are seeing,
which is 0.00062 seconds. To get an actual sample rate less than this
value, you will need to provide an external clock. For example, to
achieve a clock rate of 300 S/s, you would need to provide an external
clock at an integer multiple of 76.8 kHz (up to 2.3808 MHz).
Also, thanks for adding the attachments to your post. This gives other users easier access to the information to both provide help
and also to be able to view all the relevant information when exploring
the post in the future (in case anyone else runs into the same type of
problem). In any case, thanks again for the post and for all the
details of your problem! Cheers,
Daniel S.
National Instruments
Similar Messages
-
'expression is of wrong type' - but which and where..?
hello.
Hopefully this will be clear as day to someone.. Please could someone tell me why I'm getting the following error message..
[061010_042222995][][EXCEPTION] SQLException encounter while executing data trigger....
java.sql.SQLException: ORA-06550: line 4, column 20:
PLS-00382: expression is of wrong type
ORA-06550: line 4, column 1:
PL/SQL: Statement ignoreddata template where trigger is called..
<?xml version="1.0" encoding="utf-8" ?>
- <dataTemplate name="UofS_OutstandngExpenses_Report" defaultPackage="SUBIXCLT" dataSourceRef="FINDEV" version="1.0">
- <properties>
<property name="xml_tag_case" value="upper" />
<property name="include_parameters" value="true" />
<property name="debug_mode" value="on" />
</properties>
- <parameters>
<parameter name="p_claimant" dataType="character" defaultValue="" />
<parameter name="p_expense_date_from" dataType="date" defaultValue="" />
<parameter name="p_expense_date_to" dataType="date" defaultValue="" />
<parameter name="p_raisedby" dataType="character" defaultValue="" />
<parameter name="p_status" dataType="character" defaultValue="" />
<parameter name="p_ordered_by" dataType="varchar2" defaultValue="" />
</parameters>
- <dataQuery>
- <sqlStatement name="Q1">
- <![CDATA[
SELECT DISTINCT
erh.invoice_num,
pap.full_name EMP_CLAIMING,
DECODE(NVL(erh.expense_status_code, 'Not yet Submitted (NULL)'), 'CANCELLED', 'CANCELLED',
'EMPAPPR', 'Pending Individuals Approval', 'ERROR', 'Pending System Administrator Action',
'HOLD_PENDING_RECEIPTS ', 'Hold Pending Receipts', 'INPROGRESS', 'In Progress', 'INVOICED', 'Ready for Payment',
'MGRAPPR', 'Pending Payables Approval', 'MGRPAYAPPR', 'Ready for Invoicing', 'PAID', 'Paid',
'PARPAID', 'Partially Paid', 'PAYAPPR', 'Payables Approved', 'PENDMGR', 'Pending Manager Approval',
'PEND_HOLDS_CLEARANCE', 'Pending Payment Verification', 'REJECTED', 'Rejected', 'RESOLUTN', 'Pending Your Resolution',
'RETURNED', 'Returned', 'SAVED', 'Saved', 'SUBMITTED', 'Submitted', 'UNUSED', 'UNUSED',
'WITHDRAWN','Withdrawn', 'Not yet Submitted (NULL)') "EXPENSE_STATUS" ,
NVL(TO_CHAR(erh.report_submitted_date,'dd-MON-yyyy'),'NULL') SUBMIT_DATE,
NVL(TO_CHAR(erh.expense_last_status_date,'dd-MON-yyyy'),'NULL') LAST_UPDATE,
erh.override_approver_name ER_Approver,
fu.description EXP_ADMIN,
erh.total,
erh.description
FROM
AP_EXPENSE_REPORT_HEADERS_all erh,
per_all_people_f pap, fnd_user fu
WHERE erh.employee_id = pap.person_id
AND fu.user_id = erh.created_by
AND NVL(erh.expense_status_code, 'Not yet Submitted') NOT IN ('MGRAPPR', 'INVOICED', 'PAID', 'PARPAID')
AND pap.full_name = NVL(:p_claimant, pap.full_name)
AND TRUNC(erh.report_submitted_date) BETWEEN NVL(:p_expense_date_from, '01-JAN-1999') AND NVL(:p_expense_date_to,'31-DEC-2299')
AND fu.description = NVL(:p_raisedby,fu.description)
AND erh.expense_status_code = NVL(:p_status,erh.expense_status_code) &L_ORDERED_BY
]]>
</sqlStatement>
</dataQuery>
<dataTrigger name="beforeReport" source="SUBIXCLT.beforeReportTrigger" />
- <dataStructure>
- <group name="G_XP_CLM_TRACKNG" source="Q1">
<element name="INVOICE_NUM" value="INVOICE_NUM" />
<element name="EMP_CLAIMING" value="EMP_CLAIMING" />
<element name="EXPENSE_STATUS" value="EXPENSE_STATUS" />
<element name="SUBMIT_DATE" value="SUBMIT_DATE" />
<element name="LAST_UPDATE" value="LAST_UPDATE" />
</group>
</dataStructure>
</dataTemplate>and the package spec & body..
--THE SPEC...
CREATE OR REPLACE PACKAGE Subixclt IS
FUNCTION beforeReportTrigger RETURN VARCHAR2;
p_order_by VARCHAR2(50);
l_ordered_by VARCHAR2(350);
p_claimant VARCHAR2(80);
expense_date_from DATE;
expense_date_to DATE;
p_raisedby VARCHAR2(80);
p_status VARCHAR2(80);
p_ordered_by VARCHAR2(80);
--RETURN VARCHAR2;
END;
--THE BODY...
REATE OR REPLACE PACKAGE BODY Subixclt IS
FUNCTION BeforeReportTrigger RETURN VARCHAR2 IS
BEGIN
Fnd_File.PUT_LINE(Fnd_File.LOG,'L_ORDERED_by'||L_ORDERED_BY);
DECLARE
L_ORDERED_BY VARCHAR2(50);
P_ORDERED_BY VARCHAR2(50);
P_RAISEDBY VARCHAR2(50);
P_STATUS VARCHAR2(50);
P_CLAIMANT VARCHAR2(100);
P_EXPENSE_DATE_FROM DATE;
--P_EXPENSE_DATE_FROM VARCHAR2(50);
--P_EXPENSE_DATE_TO VARCHAR2(50);
P_EXPENSE_DATE_TO DATE;
BEGIN
IF (P_ORDERED_BY='Expense Report Number') THEN
L_ORDERED_BY :='order by 1 asc;';
ELSIF (P_ORDERED_BY='Person Claiming') THEN
L_ORDERED_BY :='order by 2 asc;';
ELSIF (P_ORDERED_BY='Submit Date') THEN
L_ORDERED_BY :='order by 4 asc;';
END IF;
RETURN(L_ORDERED_BY);
--RETURN NULL;
END;
END;
END;Many thanks for looking..
DThanks for the suggestion. I initially didnt have the RETURN TRUE after every IF statement and have since removed the 'WHEN OTHERS' section but I'm still getting the same error message. If its to be believed, doesn't it sound like its not finding any of the 3 possible parameter entries available? This can't be so, I've checked the ConC Program parameter name is correct, and the value set linked to it only has available the 3 options where I make the choice..
Body now reads:
CREATE OR REPLACE PACKAGE BODY Subixclt
AS
FUNCTION BEFOREREP (P_ORDERED_BY IN VARCHAR2)RETURN BOOLEAN IS
BEGIN
--FND_FILE.PUT_LINE(FND_FILE.LOG,'L_ORDERED_by'||L_ORDERED_BY);
DECLARE
L_ORDERED_BY VARCHAR2(50);
--P_RAISEDBY VARCHAR2(50);
--P_STATUS VARCHAR2(50);
--P_CLAIMANT VARCHAR2(100);
--P_EXPENSE_DATE_FROM DATE;
--P_EXPENSE_DATE_TO DATE;
BEGIN
IF (P_ORDERED_BY='Expense Report Number') THEN
L_ORDERED_BY :='order by 1 asc;';
ELSIF (P_ORDERED_BY='Person Claiming') THEN
L_ORDERED_BY :='order by 2 asc;';
ELSIF (P_ORDERED_BY='Submit Date') THEN
L_ORDERED_BY :='order by 4 asc;';
RETURN TRUE;
END IF;
-- EXCEPTION WHEN OTHERS THEN RETURN FALSE;
--RETURN(L_ORDERED_BY);
END;
END;
END;error log reads:
XDO Data Engine Version No: 5.6.3
Resp: 20707
Org ID : 102
Request ID: 2484872
All Parameters: p_raisedby=SUSAN HOLLIDAY:p_status=:p_claimant=:p_expense_date_from=:p_expense_date_to=:P_ORDERED_BY=Person Claiming
Data Template Code: SUBIXCLT
Data Template Application Short Name: PO
Debug Flag: N
{p_claimant=, p_expense_date_to=, p_status=, p_raisedby=SUSAN HOLLIDAY, p_expense_date_from=, P_ORDERED_BY=Person Claiming}
Calling XDO Data Engine...
[061110_114425280][][STATEMENT] Start process Data
[061110_114425282][][STATEMENT] Process Data ...
[061110_114425284][][STATEMENT] Executing data triggers...
[061110_114425284][][STATEMENT] BEGIN
SUBIXCLT.p_claimant := :p_claimant ;
SUBIXCLT.p_expense_date_from := :p_expense_date_from ;
SUBIXCLT.p_expense_date_to := :p_expense_date_to ;
SUBIXCLT.p_raisedby := :p_raisedby ;
SUBIXCLT.p_status := :p_status ;
SUBIXCLT.p_ordered_by := :p_ordered_by ;
:XDO_OUT_PARAMETER := 1;
END;
[061110_114425287][][STATEMENT] 1: :
[061110_114425287][][STATEMENT] 2:null :
[061110_114425287][][STATEMENT] 3:null :
[061110_114425288][][STATEMENT] 4:SUSAN HOLLIDAY :
[061110_114425288][][STATEMENT] 5: :
[061110_114425288][][STATEMENT] 6:null :
[061110_114425291][][STATEMENT] Executing data triggers...
[061110_114425292][][STATEMENT] Declare
l_flag Boolean;
BEGIN
l_flag := SUBIXCLT.beforerep(:p_ordered_by) ;
if (l_flag) then
:XDO_OUT_PARAMETER := 1;
end if;
end;
[061110_114425293][][STATEMENT] 1:null :
[061110_114425302][][EXCEPTION] SQLException encounter while executing data trigger....
java.sql.SQLException: ORA-06503: PL/SQL: Function returned without value
ORA-06512: at "APPS.SUBIXCLT", line 27
ORA-06512: at line 4Many thanks for staying with this..
S -
HT201303 my itunes keeps saying my security code is wrong on my visa and its not
my itunes acount keeps saying my security code is wrong on my visa but its not
Is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorizations have the correct information on file.
And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store -
PLS-00382: expression is of wrong type
Hi,
oracle 9.2
I have to write one simple procedure to retrieve some column records from the table.
In the Begin... end block...I have written select statement
Now, if i include all the columns in the select query then procedure gets compile without any error...but when I remove any one column or select specific columns in the select query of that procedure then I get below error..
PLS-00382: expression is of wrong type
can anybody explain ?
RegardsHi,
below has been defined in the declaration part and using the below defined cur3 for the OUT parameter.
TYPE Rec3 IS RECORD
col1 tab.col1%TYPE,
col2 tab.col2%TYPE,
col3 tab.col3%TYPE,
col4 tab.col4%TYPE,
TYPE Cur3 IS REF CURSOR RETURN Rec3 ;
is it due to record type has been defined ?
Regards -
MY iPhone won't let me download apps, it says I need to sign in and verify account payment options. Even for a free app and then it says my security code is wrong on my credit card! Ugh!! Help please!
Did you ever get this fixed? I started getting this same message yesterday when changing my card to a debit card that I had used previosuly for years. My last purchase was Saturday morning. Creating a new account results in the same message no matter whar card I try. They must flag accounts by computer ID for this to be happening.
I got a message stating that my problem has been handed to a senior advisor. I hate this wait especialy since I have had my account since 2003. -
An unknown error occurs when trying to use daq express VI's
When I try to open the daq express VI in labVIEW 8.2 (it doesn't matter which one), the program tries to "initialize" like its supposed to, but then it says that NI Assistant host encountered an error and needs to close, then gives a message saying "an unknown error has occurred." Also, Measurement and Automation doesn't work anymore, although it did before. I searched the forums and couldn't find anything like it. Does anyone know what's going on?
Hi Kodeeswaran,
What version of LabVIEW are you using? Are you seeing the same issues with Measurement and Automations Explorer?
When you reinstalled everything what order did you install all the software?
The issue might be caused by file permissions. Do you have Administrative rights on the computer? If not can you try replicating the issue while logged on as administrator. If you don't see the error while administrator you will need to change the file permissions for some necessary files:
Log onto the computer as an administrator
Browse to the C:\Program Files\National Instruments\MAX directory
Right-click the MAX folder and select Properties
Click the Security tab, and click the Add button
Type in the user name and click OK
Give the user Read & Execute, List Folder Contents, and Read permission
Click Apply and then OK
If you have several different users and want all users to use the DAQ Assistant, repeat the above steps but type everyone for the user name. The above steps are written for Windows XP with a NTFS file system. For previous Windows versions, the procedure will be very similar but may not be exactly the same.
Sappster -
T.code/Report for calculate received values for a subcontract
Hi Experts,
Can you any one help on this issue.
u201CIs there a T-code/report that will calculate the received values for a subcontract broken out by code - or remaining values per code - even when the contract has non-valuated GR lines?
MATDOCS does not capture the dollar value of non-VAL GR lines - only the qty. It captures the dollar values of valuated GRs only.
ME2N - captures the total remaining value at the Item level only - not at the code level; the codes are all listed but as in the initial account assignment tab ME23N with the original percent assignment. It does not determine remaining value per code.u201D
Thanks in advance.
Mohammad Jeelanhi
try MBLB -
T-code/Report for seeing the existing entire GL master data
Dear Experts,
Is there any t-code/Report for seeing the existing entire GL master data at chart of accounts level and company code level.
example :
GL a/c no company_code account_group shrt_text long_text tax_category open_item_management etc
172500 1000 Balance sheet tds pay tds payable * X
Thanks in Advance
Regards,
T.Kartheek
Moderator: Please, search before postingDear expert
you can use f.10 or f.08
2. GL Account Balances (Totals & Balances ) S_ALR_87012301
3. GL Line Items S_ALR_87012282
4.Display of Changed Documents S_ALR_87012293
5. Chart of Accounts S_AL:R_87012326
6.. GL Account List S_AL:R_87012328
7.. Display Changes to GL Accounts S_ALR_87012308
Regards
Ajeesh.s
Edited b -
Hi im having problems creating a Project Code Report, in one in SAP Business One is good, but i would like to see the account name beside the Account code and omitt certain codes i.e. sales etc - this i can do by the Where statement (T1.Segment_0 < [%1] which im happy enough with.
im having problems in the Query Generator.
I cannot get the Debit and Credit to total up and cannot seem to group by Project Code.
Any help in this matter, would be appreciated.the Query is as follows:-
SELECT T0.TransId, T1.Segment_0, T1.Segment_1, T1.Segment_2, T1.AcctName, T0.RefDate, T0.Debit, T0.Credit, T0.Project FROM JDT1 T0 INNER JOIN OACT T1 ON T0.Account = T1.AcctCode WHERE T0.RefDate >= '[%0]' and T0.RefDate <= '[%1]' and T1.Segment_0 >'[%2]' and T0.Project Like '%%_%%'
I would like to be able to group by Project Code and have the total amount for the Project.
Many thanks -
Report : Bind Variable in "CODE" report
Hi guys,
I was wondering if any of you could help me with this report?
Imagine the following scenario:
I have this table:
CREATE TABLE my_report_table
my_id NUMBER(15),
my_var VARCHAR2(100),
my_name VARCHAR2(100),
my_other_stuff VARCHAR2(100)
INSERT INTO my_report_table(my_id, my_var, my_name)
VALUES(1, 'some_parameter', 'my name');And I have this "code" as report
DECLARE
my_parameter VARCHAR2(100) := 'some_parameter';
TYPE T_my_report_table IS TABLE OF my_report_table%ROWTYPE;
res T_my_report_table := T_my_report_table();
BEGIN
SELECT *
BULK COLLECT INTO res
FROM my_report_table
WHERE my_var = my_parameter;
IF res.COUNT > 0 THEN
FOR i IN res.FIRST .. res.LAST LOOP
DBMS_OUTPUT.put_line('Result : ' || res(i).my_id || ', ' || res(i).my_var || ', ' || res(i).my_name);
END LOOP;
END IF;
END;
/By code report, I mean a report and I select the "Code" style in the combobox (Table, Chart, Gauge...). What I would like to do is that instead of having the variable "my_parameter", I have it as a bind. But when I edit the report and add a Binds like this (and remove the variable definition in the code):
Name : :MY_PARAMETER
Prompt : :MY_PARAMETER
Default : DEF
Tooltip: <none>When I open the report, it only shows a gray panel. No exception, noting... Can anyone help me to bind parameters with a CODE report?
Also, I have another question, is it possible to DUMP the select of a SELECT in a report without having to SELECT it into a CURSOR and parse it myself?
THanks,Hi,
You cannot have bind variables in additional plsql code.
Thanks,
Sharmila -
Global reason code report generation
Dear All,
I am running uccx8.0 standard Edition. I want to take global reason codes report, How can i do that. I think in the CCX historical report i can see the reports for preserved. But i want to see for custom reason codes.Sorry i got the solution,
-
Add on XL reporter : Wrong executable digital signature for Add on
Hi Experts,
I have a client who gets this error 'Add on XL reporter : Wrong executable digital signature for Add on' when they try to login. They are on 2007A PL45. This happens on the server as well as on clients. Uninstalll and reinstall of client didn't work. We had a look at the AddonLocalRegistration folder to see if XL reporter is registered but can't see any.
I have found a similar link in the forum but that says about 2005b.
Any help will be appreciated.
regards
JohnsonSir,
Please do the following steps :
1. Please go to the SBO-COMMON database, find table SARI, you will get
the data entry for your Addon. Please check the value of field
"AddOnChk". This is the digital signature of Addon executable file.
2. Then go to installer package of the Addon, open the ard file
(XLReporter.ard) with notepad then check the value of "addonsig".
3. Compare these two values, if they are different, please overwrite
"AddOnChk" field in database with the value of "addonsig" in ard file.
and then try to start the addon again.
4. If there are the same, the ard file or the executable file has been
corrupted. I would like to suggest you remove the installer package
from your machine, and download a fresh installer of Addon from SAP
Service Marketplace. After that, please follow the steps as per the
attached note ( Note no. 819501 ) to make your machine clean and
then install the addon again.
Regards,
AVTAR SINGH -
Upload external cap file: jcshell: Error code: 6a80 (Wrong data)?
Hi,
i use eclipse + NXP JCOP Plugins_Generic3.2.8_Target ,the card is jcop31v232.
if the cap file is generated by eclipse project , when i upload exteral cap file ,no error
but if the cap file is generated by converter command ,there is error
what error?help me
cm> /terminal "winscard:4|Feitian R502 Contact Reader 1"
--Opening terminal
/card -a a000000003000000 -c com.ibm.jc.CardManager
resetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B FA 13 00 00 81 31 FE 45 4A 43 4F 50 33 31 56 ;.....1.EJCOP31V
32 33 32 93 232.
IOCTL().
ATR: T=1, FI=1/DI=3 (93clk/etu), N=0, IFSC=254, BWI=4/CWI=5, Hist="JCOP31V232"> => 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00 ..............
(104154 usec)
<= 6F 65 84 08 A0 00 00 00 03 00 00 00 A5 59 9F 65 oe...........Y.e
01 FF 9F 6E 06 47 91 73 51 2E 00 73 4A 06 07 2A ...n.G.sQ..sJ..*
86 48 86 FC 6B 01 60 0C 06 0A 2A 86 48 86 FC 6B .H..k.`...*.H..k
02 02 01 01 63 09 06 07 2A 86 48 86 FC 6B 03 64 ....c...*.H..k.d
0B 06 09 2A 86 48 86 FC 6B 04 02 15 65 0B 06 09 ...*.H..k...e...
2B 85 10 86 48 64 02 01 03 66 0C 06 0A 2B 06 01 +...Hd...f...+..
04 01 2A 02 6E 01 02 90 00 ..*.n....
Status: No Error
cm> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
cm> init-update 255
=> 80 50 00 00 08 A7 C7 04 88 8C 87 3F DE 00 .P.........?..
(68417 usec)
<= 00 00 93 36 01 29 05 95 13 05 FF 02 00 5F E1 48 ...6.)......._.H
67 60 FD 2F 89 FF AD A4 72 B4 17 E9 90 00 g`./....r.....
Status: No Error
cm> ext-auth plain
=> 84 82 00 00 10 17 6D 1C 2A 87 9E 0A 24 3F 15 83 ......m.*...$?..
A4 84 10 C0 75 ....u
(71713 usec)
<= 90 00 ..
Status: No Errorh1.
cm> upload -d "D:\JCIDE_workspace\hello\hello\javacard\hello.cap"
=> 80 E6 02 00 12 05 A0 00 01 00 62 08 A0 00 00 00 ..........b.....
03 00 00 00 00 00 00 00 ........
(56499 usec)
<= 00 90 00 ...
Status: No Error
=> 80 E8 00 00 FF C4 82 01 A1 01 00 0F DE CA FF ED ................
01 02 04 00 01 05 A0 00 01 00 62 02 00 1F 00 0F ..........b.....
00 1F 00 0B 00 15 00 2E 00 0C 00 63 00 17 00 12 ...........c....
00 00 00 6F 00 02 00 01 00 0A 02 01 00 04 00 15 ...o............
02 03 01 07 A0 00 00 00 62 01 01 00 01 07 A0 00 ........b.......
00 00 62 00 01 03 00 0B 01 07 A0 00 01 00 62 03 ..b...........b.> 01 00 08 06 00 0C 00 80 03 00 FF 00 07 01 00 00 ................
> 00 1C 07 00 63 00 01 10 18 8C 00 00 7A 05 30 8F ....c.......z.0.
> 00 01 3D 8C 00 02 18 1D 04 41 18 1D 25 8B 00 03 ..=......A..%...
> 7A 02 21 18 8B 00 04 60 03 7A 19 8B 00 05 2D 1A z.!....`.z....-.
> 04 25 75 00 10 00 01 00 30 00 09 18 19 8C 00 06 .%u.....0.......
> 70 08 11 6D 00 8D 00 07 7A 05 21 19 8B 00 05 2D p..m....z.!....-
> 7B 00 08 03 1A 03 7B 00 08 92 8D 00 09 3B 19 03 {.....{......;..
7B 00 08 92 8B 00 0A 7A 08 00 17 00 02 00 01 00 {......z........
01 03 00 0A 48 65 6C 6C 6F 57 6F 72 6C 64 00 00 ....HelloWorld..> 00 00 05 00 2E 00 0B 06 80 03 00 01 00 00 00 06 ................
> 00 00 01 03 00 .....
>(1200 msec)
<= 6A 80 j.
Status: Wrong data
jcshell: Error code: 6a80 (Wrong data)
jcshell: Wrong response APDU: 6A80thank you. I use jcdk 2.2.1,jcop31v232 supports jc2.2.1 and gp2.1.1
And i can not understand this:
your jcop card is not a javacard v3 card.
cm> /cap-info -p "D:\JCIDE_workspace\hello\hello\javacard\hello\hello" "D:\JCIDE_workspace\hello\hello\javacard\hello.cap"
jcshell: Cannot read file <D:\JCIDE_workspace\hello\hello\javacard\hello.cap>: Incomplete CAP file, missing mandatory component: Header.capbut there is Header.cap in hello.cap:
hello/javacard/Header.cap :
01 00 13 de ca ff ed 01 02 04 00 01 09 a0 00 01
00 62 03 01 0c 02 -
When I try to download a app even for free it says my security code is wrong on my credit card but it is not wrong why is it doing that?
Is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorisations have the correct information on file.
And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page -
Iam trying to change my credit card information on my account and it keeps saying my security code is wrong, but I keep typing ti correctly, how so i fix this so i can update my account?
This is rediculous. Nobody on these forums are any help. There are tons of people who are having this problem and Apple is doing nothing. Personally my card just up and stopped working the other day. It works every where else but iTunes. I think this is what Anita is trying to say.
Maybe you are looking for
-
Update error while creating production order (TCODE CO01)
Hello, We have created new plant into development server for testing. We have created production Order few days back at that time we have not faced any problem. But from last two days , when we create new production Order , system gives following err
-
EEWB : Error while generating extension using wizard
Folks, We are on CRM 5.0, am getting the following error when I try to create few custom fields using EEWB. While creating the project & extension, I gave #temp as the package (dev. class). when I try to start the wizard for creating new fields and p
-
I updated a program on my Mac Book Pro and now Safari doesn't connect to the internet but Outlook and my mail does. I have shut the compluter down completely but I still have the problem. Any sugestions out there?
-
Shutdown while startup, disk full error on verbose
i have a mac book pro when starting , the gray screen appears, later the apple and 10 seconds later aprox, turn off i try verbose mode and after turn off i can see a message “Disk full error" Operating system: OSX 10.9 322MB FREE OF 300GB .. (my girl
-
IChat shows numbers instead of names for facebook contacts, how to fix?
I just started using iChat for Facebook Chat, but it shows numbers instead of names for most of my contacts. Is there any workaround for this? Adium shows names just fine, but I want to use iChat instead. Thanks!