DAQ Monitor Equivalent function in NIDAQmx

Hello,
What is the equivalent function of DAQ_Monitor() in the NIDAQmx.
I want to read the ADCs into a buffer and perform DAQ_Monitor operation upon the buffer at regular interval.
Any suggestions??
regards,
Dwivedi

There isn't really a one-to-one mapping between Traditional Legacy VIs
and NI-DAQmx VIs. So can you explain a little more what you are trying
to accomplish? By "perform DAQ_Monitor()" do you mean reading (grabbing
samples from) the buffer at regular interval or just seeing what is in
the buffer? In the latter case, are you interested in just the number
of samples or the actual samples?

Similar Messages

What is the equivalent function of NIDAQYield in NI-DAQmx?

I have to migrate from traditional NI-DAQ to NI-DAQmx for Window 7 64bits system. I like to find the equivalent function of NIDAQYield in NI-DAQmx?

As far as I can see here, NIDAQYield is simply a way to process system events, so I suppose calling ProcessSystemEvents () will be equivalent to calling it.I do not know of a native DAQmx function that does the same. It is to be said, though, that DAQmx way of handling acquisition process is different from Traditional DAQ one and direct translation is not always possible, so depending on how you migrate your code, calling those functions may be unnecessary.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Error: DAQ-STC Counter functions missing from library

Using LabView 6.1, NI-DAQ 6.6.1 for MacOS on a laptop.
DAQ Hardware: DAQCard 16E-4.
When trying to use the advanced counter functions (for DAQ-STC type counters), LabVIEW generates an error saying that it can't find the function in the library. The code interface nodes for the VIs don't seem to be attached to anything. I've installed the latest version of DAQ Drivers for Mac; am I missing something here? Any insight into this problem would be appreciated.
Regards,
jdk

Hi jdk,
I think it could be just an installation issue. I assume that you are using Mac 9.1. I've run LV 6.1 with NIDAQ 6.6.1 on Mac 9.1 and it works just fine, including DAQ-STC counter functions.
If LabVIEW 6.1 was installed without DAQ support, run the LabVIEW 6.1 installer and perform a custom installation for DAQ support. Then, run
the NI-DAQ 6.6.1 installer to upgrade NI-DAQ.
Hope this helps.
Regards,
Pravin Borade
Applications Engineer, National Instruments

@RELATIVE() equivalent function in Financial Reporting Studio?

All,
Is there an FR equivalent function to the @RELATIVE() function in Essbase?
Specifically, I'm trying to select Level 0 descendants of a particular member.
e.g. @RELATIVE(MEMBER,0) would be the equivalent function in Essbase.
I've tried to use the RelativeMember function, but that does not appear to do the same thing.
I also tried to union two selections, but that just returns an MDX error.
e.g. assume I want to return child 2 and 3
Dimension
Parent A
Child 1
Parent B
Child 2
Child 3
Lev0,Dimension NOT Descendant Parent A (this is not the actual syntax, but an explanation of what I tried). This returns an MDX error to do with "NOT".
Any help is appreciated...

That was extremely helpful. I was able to get it working with the following syntax
Descendants of <Member> AND System-defined member list Lev0,<Dimension>
Thanks again for your help.

Equivalent function for box3d which available in Postgis

I have a road_network data I am trying to
obtain all the values within a bounding box formed by lat long values,
i tried below example but it compiled and produces some error
declare @exmp varchar;
set @exmp = 'POLYGON(81.959545899804 25.243612186501,81.985879306176 25.2726072490010)'
DECLARE @box geography = geography::STLineFromText(@exmp, 4326)
SELECT source,target,geog4326.STAsText()
FROM road_network
WHERE geog4326.STIntersects(@box) = 1;
in PostGIS theres a box3d, i like to know is there any equivalent function available in MS SQL Server ?

a few problems here:
1.
run this- what do you see?
declare @exmp varchar;
set @exmp
= 'POLYGON(81.959545899804 25.243612186501,81.985879306176 25.2726072490010)'
print @exmp
a varchar initialised without a size defaults to varchar(1)
so set varchar to the required value or set it to varchar(max)
2. A polygon requires at least 3 distinct points and the start and end points need to be the same. I'm assuming you just want to draw a line between the 1st & 3rd points of your bounding box and have the db engine draw the box around them. So you should
be declaring it as a LINESTRING, not a polygon. Unfortunately geography doesn't have a .STEnvelope() function, so you'll need to convert the line to geometry, get the envelope, then convert back
declare @exmp varchar(max);
set @exmp = 'LINESTRING(81.959545899804 25.243612186501, 81.985879306176 25.2726072490010)'
DECLARE @box geography = geography::STLineFromText(@exmp, 4326)
-- Work out bounding box by converting to geometry via WKB, then using STEnvelope()
DECLARE @boundingbox geometry = geometry::STGeomFromWKB(@box.STAsBinary(), @box.STSrid).STEnvelope();
-- Convert result back to geography via WKB
SET @box = geography::STGeomFromWKB(@boundingbox.STAsBinary(), @boundingbox.STSrid);
(from
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/453d2fe8-bbe6-4047-90ce-556015c17e64/how-to-get-the-bounding-rectangle-of-a-geography)
now you can intersect your @box.
If this were geometry you could've just used .STFilter() on your linestring directly.. I'm not sure how .Filter() works with geography but investigate it as it'll be faster if your road_network table has correct spatial indexes.
Jakub @ Adelaide, Australia

"Extract" filter or equivalent function

Where do I find the "Extract" filter or equivalent function found on earlier versions of Photoshop?

Norm, you'll have noticed the video is one of those super easy images they used to demo Refine Edge when it was first available? I struggled with the tool for ages back then, finding a far from intuitive tool to use in real world situations, which is why I often use the Martin Evening tutorial on this forum, because he demos a difficult image, plus he shows how best you use it in the target image. But I decided to make it look easy in my post above

Java Equivalent Function to Obfuscation DES3 Procedures

I've read all of the notes and reports that I could find on both OTN and MetaLink, but I can't find a solution anywhere. Just hints, particularly in Note 232000.1 and Note 225214.1. I've been trying all of the variations that I can think of in test code with no success. I've also searched the net extensively.
What I need is a code sample IN JAVA that provides equivalent functionality to the des3encrypt and des3decrypt procedures using raw values in the obfuscation toolkit.
We have a number of huge databases in which we would like to use the obfuscation toolkit with DES3 3-key (192-bit) keys to manage encrypting
confidential data. We need to be able to read this data from Java applications. Those applications must be able to decrypt the values encrypted using the toolkit. We must also be able to do the reverse, encrypt data in Java, store the encrypted values, the decrypt and access the data in PL/SQL using the toolkit.
I've searched high and low, but I cannot find sample code anywhere for performing this functionality in an equivalent fashion.
Thanks!
Mark Scarton
[email protected]

Hi Mark,
I encountered a similar challenge, were you able to figure out the solution for this problem?
Thanks,
Srikanth

Scan_to_disk replacement function for nidaqmx.h

Hello,
We are upgrading an old card to a PCI NI 6224 or 6225. The old project was developed in C++ and used the nidaq.h header. The new development will also be done using C++.
1) Is there any documentation on how to use the nidaqmx.h file in C++? If you could point me to it that would be great.
2) Using C++ as our base, would it be possible to use two 6224 cards instead of the 6225? Is it still possible to synchronize the cards?
3)
I need to replace the old function Scan_to_disk with something that
will do the same thing in the nidaqmx driver. Is this function still
realisable? Is there a procedure out there somewhere?
Thanks

Sparckis,
To help answer your questions.....
1) Is there any documentation on how to use the nidaqmx.h file in C++? If you could point me to it that would be great.
Using NI-DAQmx in Text Based Programming Environments
For further information about using the functions in the DAQmx API, please refer to the NI-DAQmx C Reference Help located in the Windows start menu:
Start » Programs » National Instruments » NI-DAQ
2) Using C++ as our base, would it be possible to use two 6224 cards instead of the 6225? Is it still possible to synchronize the cards?
Yes, you can use two cards in C++, you will just have separate tasks for each as you would in any language. They can be synchronized by use of a RTSI cable.
3) I need to replace the old function Scan_to_disk with something that will do the same thing in the nidaqmx driver. Is this function still realisable? Is there a procedure out there somewhere?
Old Forum on Issue
What are the Terminology Changes in NI-DAQmx?
Alex A.
Applications Engineer

What is the equivalent function or combination of functions for the following ASYST code

I'm translating a program from AYSYT (very old out-of-date language)to LABVIEW. Thanks to the help from you guys. I have done 99% of my work. But I still have a small question to ask for help. Dose any body know what function or combination of functions in LABVIEW is equivalent to the folowing ASYST code: 0.5 set cut off frequency MOB(array used in the program) smooth.
After reading the ASYST MANUAL, I know "smooth" is to apply some kind window(e.g. BALCKMAN).but LABVIEW doesn't have the "smooth"function

I got strange result after using balckman window.
the xy-graphs of my data before and after using blackman
window are posted here. the magnitude and the peaks all changed after using blackman window.the peaks magnitude decreased more than ten times. The original ASYST code gives only a little bit lower peak after smoothing(4.2e-6 is the highest peak before smoothing, while 3.6e-6 is the smoothed highest peak).
Attachments:
before_blackman_windowed.bmp ‏1747 KB
blackman_windowed.bmp ‏1747 KB

What is the equivalent function of this...

the following codes are in awt form, what are the equivalent swt form of the following function? thank you for your help
ActionListener listener = new MenuItemActionListener(panel);
*MenuItemActionListener(panel); is the awt
Component parent; (Component is the awt)
and using Color.<what_color>
Again thank you!

if you're planning on coming here getting the forum to re-write all your awt code in swt bit by bit, forget it. as far as I know, there's only 2 or 3 people who post here that know swt, and nobody's in the business of rewriting code on other people's behalf anyway. the swt documentation that comes with eclipse, plus the javadocs for swt, are more than good enough for you to manage this

Equivalent function of DAQ_VScale in Daqmx

Hi
I would like to know the equivqlent function of DAQ_VScale of traditional Daq
in Daqmx.
My application is to measure DC volatge.
My DAQmxReadAnalogF64() function is acquiring but,
i am getting the data in the raw format.
In the Daqmx series, how is the scaling or transform data to voltage
is taken care.
or
do i get the voltage directly from the DAQmxReadAnalogF64() function.
do let me know
regards
rags

Hello Rags,
The value returned by your analog input (AI) function (such as AI_Read) is an array of integers that represents the analog to digital (A/D) conversion of your data. The DAQ_VScale and AI_VScale functions convert the integer values to an actual voltage reading (LabVIEW does the conversion automatically).
If you look at page B-8 of the NI-DAQ Function Reference Manual, you will see that the formula is listed there. What you could do is read the raw data using DAQmx and then just apply that formula to your readings. In DAQmx the scaling is automatically taken care of for you. Are you sure you are using the DAQmxReadAnalogF64 function and not the DAQmxReadAnalogScalarF64 function?
Also refer to What Does the DAQ_VScale Function Do?
Best Regards,
Raajit L
Raajit L
National Instruments

Monitor equivalent to an iMac

Hi,
I am searching for a monitor that is equivalent in quality to an iMac 21 inch. I've tried some monitors with my mac mini, but I have yet to find one comparable. The monitors that I have tried are either too bright, not easy on the eyes, do not match the colors well, seem washed out, and have bad viewing angles.
A feature that is a deal breaker for me is not being able to view it at all angles. I do workout programs at home and at times I am on the floor looking up at the monitor, and with the monitors that I have tried, the screen gets too dark and is not viewable.
Another feature that I have found to be cumbersome are the controls on the monitors to make adjustments. With an iMac, you can use the keyboard to adjust brightness when needed.
Will you please recommend a monitor close to the size of the 21 inch iMac that is just as good in quality. I would like to get it at Best Buy if at all possible.
Thank you for your time.

The iMac has a resolution of 1920 x 1080. It also has an LED backlit IPS display giving it superior color and image quality. Any monitor that has all of these features will give a similar visual experience. For the long haul I like the NEC EA224WMI-BK 21.5 Inch.

Looking for struts bean:write Equivalent function/ tag in jsf??

Hi to all,
I am quite new to jsf. Soi might be asking a stupid question.
I just wanna to know is there an equivalent tag or simple scriplet that can provide the same function as strut <bean:write>?
Thanks and regards,
Chin Tat

ok i am not a struts programmer but from a quick search i am assuming <bean:write> outputs in html the value of a property in your java bean?
if this is the case then you simply use
#{beanName.propertyName}
i.e
<h:outputText value="#{beanName.propertyName}"/>
note your bean will have to be registered in you facesContext as a managed bean to do this (where beanName is the name of your managedBean)
if bean:write doesn't do this sorry :) forget my answer

:Multi Monitor: php function hint stretches across all monitors!!

Dreamweaver CS4
Windows 7 x64
Whenever I'm writing php script with dreamweaver and start to type a php function (in this example strstr) the code hints for arguments pops up after typing the first parentheses to show what arguments are accepted (in this example haystack and needle). This is all well and good, sometimes it's helpful if I have forgotten and need a reminder but the problem is I have 4 monitors and the hint pops up on the left monitor when I am actually coding on the right monitor... It's an annoying flaw that I can't seem to find a fix to.
So to recap: I have 4 monitors from left to right.
I use dreamweaver on the RIGHT two monitors.
The function argument hinting while coding PHP appears on the furthest LEFT monitor (1st monitor)
It also leaves a bar across all monitors.
If there is a way to fix this bug please let me know

Dreamweaver CS4
Windows 7 x64
Whenever I'm writing php script with dreamweaver and start to type a php function (in this example strstr) the code hints for arguments pops up after typing the first parentheses to show what arguments are accepted (in this example haystack and needle). This is all well and good, sometimes it's helpful if I have forgotten and need a reminder but the problem is I have 4 monitors and the hint pops up on the left monitor when I am actually coding on the right monitor... It's an annoying flaw that I can't seem to find a fix to.
So to recap: I have 4 monitors from left to right.
I use dreamweaver on the RIGHT two monitors.
The function argument hinting while coding PHP appears on the furthest LEFT monitor (1st monitor)
It also leaves a bar across all monitors.
If there is a way to fix this bug please let me know

Char Input and kbhit() equivalent function injava

May be its very simple question.
But can anyone please suggest me how to get char as input from keyboard and store it into char primitive type.
and also suggest equivalent kbhit() function in java.
please be more elabotative so that noviece can easily get.

j_adroit wrote:
Please tell how to do it.This is where it gets complicated. You will have to create a JNI wrapper for kbhit() .
I would suggest you find a different way of getting input to your program.

DAQ Monitor Equivalent function in NIDAQmx

Similar Messages

Maybe you are looking for