DAQCard-AI-16XE-50 with NI6715 installed in one laptop

Now I want to buy a NI6715 card and a DAQCard-AI-16XE-50 and install them in one laptop together.I choose the SHC68-68-EP cable for NI6715 and PSHR68-68 cable for DAQCard-AI-16XE-50.I am not sure these two cable can be used together in one laptop.Maybe somebody can tell me?
Thanks a lot!

Lincoln,
The SHC68-68-EP is design to fit in a Daqcard that is in the bottom PCMCIA slot, and the PSHR68-68 (is the strain relief right?) does not has any limitation about space... so if you use the PSHR68-68 cable in the top slot and the SHC68-68-EP in the bottom slot you will work fine. I already check them here.
Good luck!..
Nestor Sanchez
Applications Engineer
National Instruments
Nestor
National Instruments

Similar Messages

I am currently a CC member with it installed on my laptop, I want to intall on a PC as well. Will the subsciption allow me to do that?

I am currently a CC member with it installed on my laptop, I want to intall on a PC as well. Will the subsciption allow me to do that?

thanks
Sent from Yahoo Mail on Android
From:"jomarielawrence" <[email protected]>
Date:Mon, Feb 23, 2015 at 10:16 PM
Subject:Reply marked as helpful on I am currently a CC member with it installed on my laptop, I want to intall on a PC as well. Will the subsciption allow me to do that?
I am currently a CC member with it installed on my laptop, I want to intall on a PC as well. Will the subsciption allow me to do that?
jomarielawrence marked David__B's reply on I am currently a CC member with it installed on my laptop, I want to intall on a PC as well. Will the subsciption allow me to do that? as helpful. View the full reply
Marked as helpful:
Hi Ken,
The software allows installing on two computers, so installing on your laptop is fine. You'll just want to repeat the install process on laptop.
This document explains the install process: Creative Cloud Help | Install, update, or uninstall apps
Also, this FAQ might be useful for you. It goes over a lot of common questions when just getting started:
https://helpx.adobe.com/creative-cloud/faq.html
Hope that helps,
- Dave
Following I am currently a CC member with it installed on my laptop, I want to intall on a PC as well. Will the subsciption allow me to do that? in these streams: Inbox

Program DAQCard-AI-16XE-50 with Measurement studio

Does DAQCard-AI-16XE-50 can works with a application created by Measurement studio? I have developed a data acquisition software base on PCI-MIO-16E-4, but I want swith the card to DAQCard-AI-16XE-50, it likes doesn't work, I don't known why?

Thanks lots to Chris and RamziH,
I have tested DAQCard-AI-16XE-50 on Max, it works fine all analog channels, the device nubmer is 1. So, in my program I am using this device number, checking the sample rate no more than 20kHz and no analog output function in my program, but it still doesn't works. Does CWAI works with DAQCard-AI-16XE-50? The DAQ driver version is 6.9.2.
Thanks again.

Dual Booting Windows 7 with pre-installed Windows 8 Laptop

Hi All,
Just after a bit of advice, my girlfriend has recently got a new laptop and unfortunately she doesn't like it, despite me loving Windows 8.1.
She would like to try Windows 8 but is going back to Uni soon so would like Windows 7 as a back-up dual booted.
I've shrunk the partition and created a simple partition for Windows 7 but really unsure about Installing Windows 7 on a Windows 8 Laptop, it's an ASUS X550CA-XX417H. I've checked power shell with SecureBootUEFI and result is True.
What would be the best way to dual boot?
Cheers,
Ben

Hi Ben,
Here is a detailed guide for your reference:
How to Dual Boot Windows 8 with Windows 7
http://www.pagestart.com/win8dbwin701181301.html
This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on
these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Hope this could be helpful.
Kate Li
TechNet Community Support

Sharing itunes libarary with multiple users on one laptop

I have a MBP 17". I share the machine with my daughter. I wish to allow her to access my music in her profile without having to copy my whole library and putting it into her profile as this would use up a lot of space. Can someone please give mea STEP by STEP guide how I can share music form my library from my profile into her library on her profile. I hold the administrator status on the powerbook.
Please help!!!!!!!!!!!!!!!!

iTunes: How to share music between different accounts on a single computer

Backup with 2 accounts on one laptop

My wife and I each have an account on one MacBook Pro running 10.6. We are trying to figure out a good way to back up about 120 GB worth of documents, photos, home movies, Address Book, Keychain, etc spread over both of our accounts.
1) If we get one portable external hard drive, can we set it up to backup both accounts? Can you direct us to an article or tutorial that shows how to do this?
2) I haven't used Time Machine yet. If we get a portable external hard drive, do we have to use Time Machine or will the drive come with its own software to use in place of Time Machine?
3) If we use an online backup company, would we expect to pay once for backing up one computer or pay twice because we each have an account on the computer?
Thanks,
Dave

dbikester wrote:
My wife and I each have an account on one MacBook Pro running 10.6. We are trying to figure out a good way to back up about 120 GB worth of documents, photos, home movies, Address Book, Keychain, etc spread over both of our accounts.
1) If we get one portable external hard drive, can we set it up to backup both accounts? Can you direct us to an article or tutorial that shows how to do this?
Yes, get a firewire drive.
You can use SuperDuper or CarbonCopy Cloner.
to clone your entire drive to an external firewire drive. With all accounts. They are both free for cloning. SuperDuper charges a fee for "Smart Updates".
2) I haven't used Time Machine yet. If we get a portable external hard drive, do we have to use Time Machine or will the drive come with its own software to use in place of Time Machine?
No you can use anything you want. As I said thebest are SD or CCC.
The advantage of SD or CCC over TM is that they are bootable whereas TM is not. So if you get stuck you can boot from your external. Also, I find them more reliable.
3) If we use an online backup company, would we expect to pay once for backing up one computer or pay twice because we each have an account on the computer?
Don't.
-mj

I can't measure many signals at the same time using the DAQCard-AI-16XE-50.

I'm using a Compaq Presario 1655 laptop with a DAQCard-AI-16XE-50 on the PCMCIA slot, and LabVIEW 6i and MAX 2.0.
I have a SCXI-1001 Chassis with SCXI-1122 and its terminal block SCXI-1322 installed (I have others too).
I'm trying to measure some signals at the same time, for instance, measuring 2 load cells signals, and a frequency of an indutive sensor (using the analog way with the "Extract Single Tone Information.vi").
I realized that I can't measure at the same time my signals, neither the load cells - a 10608 error occurrs "NI-DAQ LV: No transfer in progress for the specified resource".
What's the problem?
Some DAQCard limitation? Configuration?
Thanks!

Hello;
By your description I'm assuming you are trying to read those analog inputs in parallel. The SCXI-1122 doesn't have that feature. All the analog inputs will be multiplexed to one single Analog Input channel on your DAQ board. If you need to make measurements in parallel, you need to use one of the SCXI modules that allows that operation. For more information on what modules support that operation, you can always refer to our home page at www.ni.com.
Hope this helps.
Filipe
Applications Engineer
National Instruments

DAQCard-AI-16XE-50 Device does not respond to 1st IRQ level in Windows XP

DAQCards AI-16XE-50 and 6024E give the error "Device not responding to first IRQ level. Do you want to continue?" under TestPanel in Max 2.2, NI-DAQ 6.9.3, on a Dell GX620 with a Ricoh RL/5C476 PCMCIA to PCI adapter. If I click yes, I see input on the graph, as if the card is working. The DAQCards work fine with the same adapter under XP on a no-name machine. The DAQCards get assigned the IRQ 19, which is the same as the IRQ which gets assigned to the CardBus Controller. There does not seem to be a way to change the IRQ assignments.

Please view the KB:
http://digital.ni.com/public.nsf/websearch/066CAE594C0B44E886256A530058F06A?OpenDocument
Certain cardbus controllers no longer support ISA based interrupts. The only Dell that we know currently does not work is the Infinium, which uses a generic Microsoft Cardbus Controller. Do you know what Controller is used in the Dell you have?

I recently upgraded to iWork v9.0.3, but when I access each applications the versions are different (i.e. Pages V.4.1, Numbers V2.6, Keynote V5.1.1) with a install date of 3/18/09 -- which is not the current install date of 2 weeks ago. Why?

I recently upgraded to iWork v9.0.3, but when I access each applications the versions are different (i.e. Pages V.4.1, Numbers V2.6, Keynote V5.1.1) with a install date of 3/18/09 -- which is not the current install date of 2 weeks ago. Shouldn't Pages, Numbers, and Keynote show version 9.?? My MAC confirned installation of v9.0.3 and even accepted the software code. With this discrepancy, how can I determine if the latest was installed and operational? I even downloading v9.0.4, 9.0.5, and 9.1. When I tried installing these downloads it popped up note stating that a later version of Keynote was already installed.

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

I bought a MBPro which came with Lion installed,i also wanted to have a copy of installation disc so i used mac app store.Normally if an app is already bought there is a warning or a sign that informs the buyer.I've charged for this download is it normal?

Hi ,i bought a MacBookPro which came with Lion installed on it (i have registered my mac book pro right after i bought it), i also wanted to have a copy of the installation disc in case of a crash, so i used mac app store to get it.Normally if an app is already bought (for iphone app store) there is a warning or a sign that informs the buyer, than the app store lets the buyer to re-download/re-install the app.I've charged for this download afterwards, because i was using virtual credit card, there was not enough money transferred to that card during that download but the app store let me download it anyway. I haven't charged before the download, the app store first let me to download it then it requested that amount of money for next download wich it was a free app. Can anybody enlight me? thanks

Hi ...
i also wanted to have a copy of the installation disc in case of a crash
If you have problems with your Mac you use Lion Recovery
However, you can create your own installation disc > How to create an OS X Lion installation disc | MacFixIt - CNET Reviews
Since Lion came pre installed on your Mac, the App Store doesn't not recognize that as a purchase so you if you want to re download Lion to create a boot disk you will have to pay for it. You can then re download Lion on all your authorized Macs for free.

How to address HP Printer Software Update 3.0, iTunes 12.0.1 update that sits in the App Store, 'Calculating' for days with no install?

The App Store indicates there is a Software Update that appears to include the HP Printer Software Update 3.0 and iTunes 12.0.1
Unfortunately, the software update fails to install. Instead, it just sits there 'Calculating' for days with no progression on the status bar of the overall update.
The update buttons of both the HP Printer Software Update 3.0 and iTunes 12.0.1 are both greyed out, with no progress bar.
Not sure of what the issue is, there is no warning or error dialog box that appears or any indication of an application that may be interfering with the install.
Any advice?
MacBook Pro (17-inch, Early 2011) 2.3 GHz Core i7, 4GB RAM

Thanks for the suggestion. I wanted to install the individual updates but because I had settings to automatically download and install updates, whenever I opened the App Store, the system would try to download and install, preventing me from canceling the update to execute each application update one at a time.
After changing the settings from automatically downloading and applying updates, followed by a restart. I was able to open the App Store and run each individual update.
Thanks again.

HT201269 I have had my laptop stolen with my itunes account on it with all my music/ films/ apps etc. Can I reverse back up my new laptop with itunes installed from my multiple apple devces?

I have had my laptop stolen with my itunes account on it with all of my music/ films/ apps etc. Can I reverse back up my new laptop loaded with itunes installed from my ipad and iphone apple devices?

Follow the directions here:
https://discussions.apple.com/docs/DOC-3141

Can I sync my iPhone to a new PC with fresh install of iTunes without erasing my phone. (sorry for the typo in original question)

Can I sync my iPhone to a new PC with fresh install of iTunes without erasing my phone. (sorry for the typo in original question)

Syncing to a "New" Computer or replacing a "crashed" Hard Drive

It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?

It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?
I was using "remote" with a D-link modem, that works fine at my iPad. But now I´m using only the cell phone as modem 3G, and don´t want to intall a router to put new cables at my notebook.

What?
You want to control iTunes on your computer using the Remote app on your iPad?
And you want to connect the iPad and computer through your Nokia?
No, this will not work.
Just create a network with your notebook.

My new iMac is not shipping with Lion installed. Will I be able to do a Migration from my PC to my iMac without installing Lion first?

My new iMac is not shipping with Lion installed. Will I be able to do a Migration from my PC to my new iMac? I only want to transfer photos and my music, currently on my PC (and on my iPod Touch & iPad).
Can anyone give me a list of steps to follow or let me know if Migration Assistant is available prior to Lion for PC to Mac?
Thank you so so so much!
-SweetDee

SweetDee,
I'd be VERY surprised if your machine was not shipping with Lion installed. However even if it doesn't when you initally install Lion it will launch into Setup Assistant, if you follow the prompts it will ask if you are migrating from another machine. You can use Pondini's Lion Setup Assistant tips for help, look for the section(s) on MS Windows migration. Also I would strongly recommend bookmarking and studying the following sites:
Switch 101
Mac 101
Find Out How Video tutorials
In closing remember you have 90 days of free telephone support with AppleCare. If you run into trouble they will be happy to assist or if you have an Apple Store in your area you can book an appointment with a Genius and they can usually help you out.

DAQCard-AI​-16XE-50 with NI6715 installed in one laptop

Similar Messages

Maybe you are looking for

DAQCard-AI-16XE-50 with NI6715 installed in one laptop