Dashed Line option

Does the Dashed Line Option only work when using only the Line Tool ?

No. You can apply a dashed stroke to any path drawn with any drawing tool.
JET

Similar Messages

Disappeared dashed lines options

very often when I want to adjust the spacing for the dashed lines in Indesign cs6, the options disappear in the stroke flyout panel.
Strangely, it remains disappeared for the specified file forever. The workaround that I do for this is that I open a new file, make the dashed lines as desired, (yeah, the options come in a new file), then copy paste it. What exactly is causing this weird behaviour?

arjun2 wrote:
Here's my screenshot with everything selected. I have yet to trash my preferences. currently learning to backup my shortcuts . Does this problem occur in the latest version of indesign which is CC?
I'm always beware of new versions, often they are heavier and take longer time to process, e.g. photoshop cs6 i found slower than cs5
You haven't select the Dashed Line at the bottom of the Type options.
You have 2 different stroke weights selected, that's why weight shows as nothing.
Bold part: That's just not true for everyone, in fact I find each version of all the Adobe suites to run perfectly fine - there may be something you need to change on your system to get the programs to work better. But I never notice any difference from version to version regarding longer times to process.

Can Flash create dashed line with blunt not rounded dashes ?

Hi,
using Flash8
I can select line tool and dashed line in properties and draw a dashed line and get a line of sausages. How do I get a line of dashes without rounded ends to each dash ?
Line option has end caps option with None (gives straight or blunt tip to line, round gives rounded tip .
Draw a line with None and its got blunt ends, select it and choose dashed line option and it gets round ends to the dashes, the end cap option is greyed out !
Are dashed lines with blunt dashes now possible again with CS4, a forum poster also found that CS3 no longer gave blunt dashes ?
Why do I ask:-
I am trying to bring a map into Flash8 from Illustrator (Illus version 10 as it allows blunt tip lines to remain blunt it was said on the forum)... which has blunt ends to roads and has blunt type dashed lines. The roads remain blunt..GOOD !..but the dashed lines become what looks like a solid line. BAD !
I do a right click - break apart, then double click one of those now solid lines that should be dashed, and I am able to select a portion of the line, it is no longer a continual line as drawn in Illustrator. Properties shows it as solid line. Flash8 obviously having a problem with supporting Illustrator 10 dashed line then !
Select dashed in properties box and I get a portion of the line as sausage dashes, but working my way along the line doing each bit sees a far from correct dashed line result as sausages dont start stop evenly as each line is a separate entity and ignores the previous line.
Looks like I shall have to try and draw the line as one long line again in flash but unless I can give it blunt dashes when done, there is no point even trying that method, hence my question.
Would the latest Illustrator and Flash versions (CS4) allow blunt type dashed lines to appear in Flash ?
This is crucial for bringing maps into Flash.
Envirographics

I noticed one problem with my solution.
If you look, very carefully, at the end of the stream, it's flat. Not rounded like it should be. After a bit of trial and error, I tried a different brush:
Note that, in addition to the rounded rectangle (done with the new corner controls in the latest version of Illustrator CC that just came out) and the three circles, there is also a rectangle, with no stroke and no fill, to provide a space at the end of the three dots. Here is the result:

Dashed line "Dash" & "Gap" options

Hey all, looking for a CS3 tip here.
I use a lot of dashed strokes, and I've found that when I enter values in the Dash and Gap boxes, I later can't delete the values entirely. I can delete whatever I entered, but Illustrator won't leave the box blank - it now fills the box with 0 point.
For example, I create a path, turn on Dashed Line, then enter 2 point Dash, 1 point Gap, and accidentally Tab to the third box. Once the focus has been put on that third box, it won't remain blank, the best I can have is 0 point. So now continuing the example, my stroke is 2 point dash, 1 point gap, 0 point dash (slightly visible on screen, invisible in print), 1 point gap, and repeat. The net effect is that it looks like a 2 point dash followed by a 2 point gap.
Any way to reset the box to contain NO information? It's bugging me because once I've created one of these "bad" dashed strokes, I either have to fudge my values to make it look right, or quit illustrator and start over because the bad values are persistent any time I turn on the dashed line checkbox until Illustrator is quit.

I'm deleting everything in the box, and just to be sure, I've tried clicking in the box and hitting command-a to select all, then hitting delete. But whether I do it that way or drop the cursor in at the end tap delete repeatedly, it still auto-fills "0 pt" when I leave the box.
As to the second point, I always try emptying the boxes from right back to the left. I get the effect you describe if I empty the first box - they all reset to blank and the "dashed line" checkbox changes to unchecked. But the moment I try to put a dashed line on a path again, it refills with the previous setting, including the 0 pt entries on the right most boxes that I would hope to stay blank.
I take it your installation doesn't replicate the behavior I'm experiencing? I will be upgrading to Leopard just as soon as I have a slump - I can just wait to see if a clean installation of Illustrator takes care of it.
Thanks.

Showing grid lines as dashed lines

Dear All,
i am using a waveform chart to plot my data .. i want to insert grid inside my chart .
There are 3 different options for inserting grids in d chart .
is dere any way i can change the style of lines of grids ?? i want to see them as dashed lines rather than a continous line ...
Thanks
Ritesh

Hi,
the solution to it was a bit complicated .. i had to search for examples to get my data on the wavefrom graph...
thing is like dis. i have to store the data of different channels on different clusters and join the clustes using Build Array ...
Now dat i am able to show the data on graph(atleast) its not showing it continously .. the graph is plotting all d data at the starting point, i.e 0 and not moving forward ..
I am posting the Block Diagram as well as the Output that i am getting ..
Regarding Block Diargram - I am reading a text file containing the waveform data.. it has N number of rows.. each row has 4 columns containing data of 4 different channels .
i read the file "line by line" and store the data in 4 diff arrays(b,c,d,e). then i cluster these 4 arrays separately and build array using dese 4 clusters .. and d output of the array is plotted on the graph den..
Pl. have a look at it and see if dere's any solution to it ..
Thanks
Attachments:
Block Diagram.JPG ‏36 KB
Output.JPG ‏17 KB

Dashed lines in illustrator cs5

Hi,
Is it possible to make lines dashed and dotted like you can in indesign cs5 where it is so simple?
i can't figure it out.
thanks

Yes and if you read about strokes and the appearance panels and experiment with adding strokes and different settings for creating dash lines you can accomplish a lot.
Look at the Stroke Panel a little more carefully and you will see the option to create dash lines.
The help probably has changed for CS5 since there is an additiona option for CS5 as to the way the dash lines are spaced
in relationship to the corners and paths the other keeps the exact measurements of the dash and gaps not considering the ends or corners

Dashed line / dotted line coupon effect? FCPX

Seeing if anyone has any tips or tricks on how to create a dashed line type of effect around an object in a video, making it look like a coupon or like it was cut out of paper?
The line doesn't necessarily progress around the object in the video -- it can be a static layer. Though, if anyone DOES have tips on animating the lines, that could be cool, too!
Thanks in advance.

Familiar with Motion?
Draw a short horizontal line. Select the Anchor point tool and drag the center to the right end of the line you drew. Replicate the line. Change the Arrangement to Outline. In the Cell Controls section, check the Align Angle option.
You will now have a dashed outline rectangle. You can publish the Size parameter and change the size of the rectangle with the Width and Height parameters from Size. You can increase the number of line segments with the Points parameter and you can animate the outline with the Offset parameter (but there's a catch.)
When animating the offset, you will have line segments extend "outside" the base rectangle shape briefly (since they are aligned to the side they are attached to, then snap to another side when the anchor point changes over from one side to the next.)
To get around that, you need to create another rectangle that is 100 by 100 and link the Scale X and Scale Y parameters (separately) to the Width and Height of the Replicator (in the Link behavior, set the Scale to 10 for both.) Drag the rectangle onto the Replicator in the Layers List and hold until you get the popup menu -- select Add Mask to Object. [PS -- you should center the Replicator AND the rectangle before adding the rectangle as a mask!] [You can create a square rectangle then select the Shape > Geometry tab and type in the exact points: (-50, 50); (50, 50); (50, -50); (-50, -50) to create the exact size you need.]
If the mask is perfectly aligned, you can now animate the dashed line and it won't look weird. You can change the width and height of the replicator and the mask will change in perfect synchronization.
You can also make the dashes longer or shorter by manipulating the Scale X parameter in the Cell Controls of the Replicator. If you made the original line white, you can colorize from the Cell Controls as well.
After that, you'll need to figure out if you want a solid color background; a drop zone or effect source/title background; what kind of text you want inside the dashed outline (or you can manually place a Basic Title in FCPX if you like); etc...
Hope this helps... If you need further help with this, let me know.

Dashed lines

Hi folks,
I'm trying to increase the length of the individual dash
strokes (i.e. shorten the gaps between the dashes). Does anyone
know how to do this; alternatively, is there a way I can make a
custom dashed line?
cheers
Rich

> I'm trying to increase the length of the individual dash
strokes (i.e. shorten
> the gaps between the dashes). Does anyone know how to do
this; alternatively,
> is there a way I can make a custom dashed line?
To create a new dashed stroke style:
1. In the Object panel, hold down Alt (Windows) or Option
(Macintosh) as you select a dash from the dash style pop-up menu.
2. To set dash sizes, enter values in any of the On text
boxes in the Dash Editor. To set the space sizes between dashes,
enter values in any of the Off text boxes.
3. Click OK to add a new dash to the dash style pop-up menu
and apply the new dash to any selected paths.
Note: The dash style pop-up menu can display up to 255 dashed
strokes. You cannot remove styles from the menu.
Reading the manual or Help File is sometimes a good idea. The
text above is copied from the latter.
Jukka

Dashed Line - Dashes Move?

I'm trying to make a dashed line move, sort of like what you see in photoshop when you outline something. Basically I want the dashes to move along a path.
Usually I can come up with these solutions pretty quickly, but I'm not able to on this one. Maybe I'm not as versed in the "shape" behaviors as I should be.
Originally I thought I could just ramp the offset of the dashes, but that's not an option. I'm hoping I don't have to make a movie of a dash moving left to right, and use that as the source of my pen. That seems a little intensive, but may work.
Anyone have a quick idea on how this should be done?

Adam:
That's helpful, but I'm trying to get the dashes to actually move (all of them) along the path, like in a loop. Like marching ants on a path. As one disappears on the end, another will come on at the start. You know?
The replicator is a good idea, but I can't get the sequence behavior to follow the path. It only allows the position to be an xyz point.
Using Motion Path wont allow me to align the angle.
I feel like I should use the shape behaviors, but that won't allow me to move anything along the path, much like the limitation with the replicator.
I keep feeling like there should be an offset that I can move, but there isn't.
I'm seriously thinking I need to animate one dash moving left to right and make that the source of the brush. Right?

Make a dashed line...

How can i make a dashed line with the rectangle tool?

With Muse 7, you can use the 'SimpleLine' widget posted on Muse exchange to get a horizontal or vertical line, with options for solid, dots, or dashes.
http://muse.adobe.com/exchange-library/lances-sample-widgets

Dashed line between pages

Is it possible to avoid the dashed line between pages when "Show Gaps Between Pages" is unchecked? In other words is it possible to have the 2 pages join seamlessly, no gaps, no dashed lines?
Thanx,
Guido

"I would like to export the document to PDF using the spreads option, so that the spreads are combined into 1 page.
However, is there a way for the PDF to recognise the page numbers originally specified in InDesign?"
When you combine pages in a spread you make one page in Acrobat. I can't see how you would expect Acrobat to see this as
two pages.
k

How to removed dashed lines from "Page Break View"?

Hi,
In Excel 2010, I found that once “Page Break View” is selected, there will be dashed lines across the view even after returning to “Normal” view. These dashed lines can be distracting.
Is there a way to remove them?
Bob

Yes use
File -> Options -> Advanced
Scroll down to Display options for this worksheet and remove the tick in Show Page breaks.
Unfortunately it's sheet specific so you'll have to do it everytime it happens until you've done all the sheets.
Unless you develope some VB to do it for you,
G North MCT

Dashed lines around graphics

I have little dashed lines that are appearing around all
graphics inserted
into the page. I checked other sites I have created and they
don't have
these lines ... so, it isn't the program in general, it must
be an option
that has turned on ???
Thanks

You're welcome. I turned off the aids for a while as well,
then realized
that they were helpful sometimes in seeing where borders of
items are.
You can pick a div by clicking on its line, or see its
properties by
hovering over the border, for instance.
Good luck,
Harvey
LinKot wrote:
> Thanks Harvey. When I selected Hide All they 'all' went
away and by process
> of elimination ... some how 'csslayout outlines' was
checked ... I unchecked
> it and away they went! Thanks again!
>
>
> "eclipsme" <[email protected]> wrote in message
> news:[email protected]...
>> View, Visual Aids, Hide All??
>>
>> Harvey
>>
>> LinKot wrote:
>>> I uploaded a visual ... the top portion is what
I see in DW8 (all
>>> inserted graphics, etc. have the dashed lines)
... the bottom is how it
>>> appears in the browser.
>>>
>>>
http://www.kwgroup.com/Image1.gif
>>>
>>> Thanks,
>>> Linda
>>>
>>>
>>>
>>>
>>>
>>>
>>> "LinKot" <[email protected]> wrote in
message
>>> news:[email protected]...
>>>> in DW's design view ... they are not visible
in the browser preview
>>>>
>>>>
>>>>
>>>> "Murray *ACE*"
<[email protected]> wrote in message
>>>> news:[email protected]...
>>>>> You are seeing these in DW's design view
or in the browser preview?
>>>>>
>>>>> --
>>>>> Murray --- ICQ 71997575
>>>>> Adobe Community Expert
>>>>> (If you *MUST* email me, don't LAUGH
when you do so!)
>>>>> ==================
>>>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>>> ==================
>>>>>
>>>>>
>>>>> "LinKot" <[email protected]>
wrote in message
>>>>>
news:[email protected]...
>>>>>> I have little dashed lines that are
appearing around all graphics
>>>>>> inserted into the page. I checked
other sites I have created and they
>>>>>> don't have these lines ... so, it
isn't the program in general, it
>>>>>> must be an option that has turned on
>>>>>>
>>>>>> Thanks
>>>>>>
>

HT2513 When accept an appointment in iCAL, I often get a box with dashed lines. What does that mean and how do I correct it

The appointment appears in iCal as a box with dashed lines. I have been unable to find out wha this means and a method to change it to a normal solid box.

You can use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on a Mac hold down the Option and Command (⌥ and ⌘ Apple) keys together. This will stop the iPod from auto-syncing with iTunes and it will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer. Once you are safely connected go to the iPod Summary tab and make sure "manually manage music and videos" is checked:
iTunes for Mac - Keyboard Shortcuts
Managing content manually on iPod and iPhone

My dashed line is rendering with a box outline. How can I fix this?

Hi,
I am trying to create a dashed line with the simple line widget - however a box is actually appearing in the final page (in addition to the dashed line), as below:
How can I adjust it so only the dashed line appears? I can't see any options for it.
Many thanks,
Jeremy

Check that the widget itself hasn't got a stroke applied to it.
Can I also recommend you have a look at my latest widget, which gives you full control over frame borders.
Better Frame Borders Widget For Adobe Muse | Creative Muse
David

Dashed Line option

Similar Messages

Maybe you are looking for