Data and diagnostics cannot be collected: Value cannot be null

I'm trying to run manual test cases in MTM 2012. Normally it is associated with our company TFS, but for a project we are required to associate it to the client's TFS.
Every time a test case is run I get the following error:
Right after the messages MTM is stalled and unable to otherwise conduct any testing with.
I assumed it was because an extra empty iteration was being created when I was saving the test case, hence the 'Value cannot be null; Parameter name: assemblyName' message. However it seems to be typical of MTM i.e. a seemingly blank iteration is being created
right below a parameter's iteration.
I can run the tests from the TFS web testing application but would prefer to run the tests from MTM.

Hi Donal,
What’s the client’s TFS mean? Do you have two TFS?
 What’s the version of the TFS?
If so, please try to connect to your company’s TFS, then do the manual tests and check the result.
If it works fine, I think there are something wrong in your client’s TFS, please repair or re-install it.
If it throw that error, I think there are something wrong in your MTM, please repair or re-install your VS.
Thanks
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • My old emails and documents are not showing up in email or finder both from the same date and I cannot find them anywhere. I do not believe I have any archive settings on. Any idea how I get them to show up?

    my old emails and documents are not showing up in email or finder both from the same date and I cannot find them anywhere. I do not believe I have any archive settings on. Any idea how I get them to show up?

    Hello gpbondi,
    The following article provdies step-by-step instructions for downloading your purchases both in iTunes and on your devices.
    Download past purchases
    http://support.apple.com/kb/HT2519
    Cheers,
    Allen

  • Date and time cannot be set

    I just bought Apple TV. The setting date and time thing is literally taking forever. As well, when I enter my iTunes name and password it tells me it's incorrect. How can I fix this??

    That means it's having trouble connecting to the network. Make sure location is set correctly. DNS should be on automatic. Check that router is up to date. If on wifi try ethernet. Reboot router, ATV.

  • TS3276 word, jpeg documents as attachments are arriving in the format of win.dat and I cannot access these attachments. How do I overcome this issue?

    I find when I receive emails the attachments are often un openable - mostly these are when I sent documents to myself from my microsoft machine to my apple ; what do I need to be able to do to read jpegs, word etc docs and also Publisher type docs.

    I find when I receive emails the attachments are often un openable - mostly these are when I sent documents to myself from my microsoft machine to my apple ; what do I need to be able to do to read jpegs, word etc docs and also Publisher type docs.

  • Display measurment data and change color depending on value

    Hi folks.  I have a 1D array of double precision measurments.  There are 20 elements in the array.  I need to display them on the front panel as well as change the backround color of each element programatically if it is out of range.  There must be an easy way to do this?
    Thanks in advance!

    Like the man says, you can't change the background color of just one element in an array. HOWEVER, there are a variety of other display options that could work, like listboxes.
    Mike...

  • Refresh data source view gets 'column' argument cannot be null

    When I try to refresh a data source view in SQL Server 2008 BIDS, I get the error: System.Data   'column' argument cannot be null.  Parameter name: column.   How to resolve this?  The underlying tables have no data yet.

    Hi PCSQL66,
    The error message should be caused by FOREIGN KEY constraint auto-generated. If you
    add a FOREIGN KEY to the generated table, then you will see the error message after clicking refresh button. Please submit this issue to below official link and then post the link back here, I think we need to get confirmation from product group.
    http://connect.microsoft.com/SQLServer
    Thanks,
    RaymondRaymond Li - MSFT

  • File dates and names missing from library

    I have recently had my hard drive replaced and started afresh. My old copy of iPhoto library downloaded photos into separate files by date order and showed the roll name I assigned. I could click on a little arrow on the left to show or hide the photos.
    In case this is relevant - when I got my computer back it didn't have iPhoto on it (just about everything else was there, such as iTunes, etc) so I put my disc in again and downloaded iPhoto from the disc. Now all photos go into the library and automatically sort into year files, but they are not organised into separate roll dates and I cannot hide the photos any more and just show a list of roll names.
    I tried downloading iPhoto_715.dmg, but this message appears "An eligible iPhoto application was not found in the location /Applications."
    Sorry I am not really very computer literate and just don't understand what is going on.... any help would be greatly appreciated.
    Thanks, Linda.

    Have you explored the options under the View menu?
    I tried downloading iPhoto_715.dmg, but this message appears "An eligible iPhoto application was not found in the location /Applications."
    To upgrade to a later version of iPhoto requires that you purchase the relevant iLife package.
    Regards
    TD

  • Current Date and Time control

    Hi,
    I'm using the Current Date control on my form.  This is OK for the date but I need the current time on a seperate control.
    I see it has binding options in the Object section ie date, date and time and time but only date seems to work.
    Does anyone know how I can set this to display the time only?
    thanks
    Paul

    Yes, that should be the answer.  But, as I said, when I select time only it still displays date and time.
    In the 'Value' tab, I've been trying different settings.  I set Type to User Entered options and Calculated options.  I only get a blank unless I set this to "Calculated - Read Only" and set the runtime property to the only option available which is 'Current Date/Time'
    So, there must be another setting that I need?
    thanks,
    Paul

  • Missing Parts in production Order no committed date and qty

    Hello Guru,
    May I ask your help to check our issue when we create a Production order, we got an error Order has missing parts. When check the Availability Check view, most of the components do not have committed date and qty even there are available stocks on them.
    Can you help check what went wrong and its possible solution already check OPJK and OPJJ seems we have correct set up for this.?
    I tried to check in CO09 on one component. from there there is also 0 committed qty and date. While the other component has OrdRes with 0 committed qty and date and there are some with values. Please help thanks.

    Hi Ramagari,
    OPJK
    Plant AAAA
    Ord Type: YYY1
    Avalability Check: 2 (Check availability during order release)
    Material Availability Part
    Check mat. availability when saving order (tick)
    Checking Rule : YP (PP checking rule - Production Order rel.)
    Component Check Type : ATP Check
    Release Material: 1 (User decides on release if parts are missing)
    PRT Part
    Checking Rule : 02 (Status check and inventory audit)
    PRT Release : 1 (User decides to release when there's no PRT)
    Capacity Part
    No check (tick)
    OPJJ
    Availability Check: 02 (Individ. Reqs)
    Checking Rule: 01 (Checking rule 01)
    Stocks parts:
    Include safety stocks (tick)
    Missing parts processing part:
    Checking period: GR : 0
    In/outward movements part:
    Incl. Pur Ord : X
    inlc. pur Req (tick)
    incl. dep req (tick)
    Incl. reserv (tick)
    incl. sales req (tick)
    incl deliver (tick)
    incl. ship notif (tick)
    incl rel ord reqs : X
    incl pld ord : X
    incl prd ord : X

  • My laptop died last night and the date and time was set for 1/1/2000. I went to change the date and time and cannot. For some reason when i pull up system preferences it will not load date and time but will load other stuff. Please help.

    Last night my laptop died and the time and date was reset. I cannot acess date and time preferences to change it and my laptop is acting really weird. My CD drive is broken so there are no options to put in a cd. Please someone help i need my laptop for school and cannot afford another.

    Many system actions will misbehave, given an inaccurate date. Resetting the NVRAM and / or SMC will not fix it, and if the system has a preposterous date you may not be able to open System Preferences to correct it. This dilemma may or may not be addressed in a future OS X update.
    If you cannot open System Preferences you can reset your system date and time using Terminal.
    Please read everything that follows before proceeding. Write them down if necessary because the effects of setting a preposterous system date are unpredictable.
    Quit System Preferences, force quit if necessary: OS X: How to quit an unresponsive application using Force Quit
    Open Terminal - it is in your Utilities folder and looks like this
    You can find Terminal by using the Finder's Go menu and choosing Utilities, then double-click the Terminal icon.
    At the prompt, you will be typing a command resembling the following:
    sudo date mmddhhnnyyyy
    ... but you must substitute the actual date and time in the command that corresponds to the date format used for your location. In other words if your custom is to use a date like 8 February 2014 then reverse the mm and dd values.
    Substitute numerals in the above command according to the following:
    mm = month
    dd = date
    hh = hour (24 hour format)
    nn = minutes past the hour
    yyyy = year
    Each of those values must be two digits except for the year which can be two or four digits. As an example if the current date and time is February 8, 2014 at 9 PM your command will be the following:
    sudo date 020821002014
    or
    sudo date 0208210014
    Either one will work. If you enter nonsensical values the system will attempt to parse the entry correctly.
    To recover from your inability to use System Preferences to set the date and time, the value entered does not have to be precise, it just has to be approximate.
    Enter that command using the actual time and date for your location and in the appropriate format, then press the Return key. Terminal will ask for your Admin Password - the same one you use when you log in to your Mac. Type it and then press the Return key. What you type will not appear, not even with •••• characters.
    To determine if your change was effective just type the date command and press the Return key. Terminal will reply with the date and time. If it appears correct and in the correct format, you should be able to open System Preferences > Date & Time once again. Selecting the "Set time and date automatically" and choosing an appropriate time server will adjust your Mac's system clock to the precise time.

  • When iPhone is on Cellular data and WiFi, i cannot make calls and phone goes out of service.

    So I have this iPhone 5S unlocked version from the US which I am using in India. When I am connected to my office wireless and also the cellular & 3G data are switched on, my phone goes out of service and I cannot make calls. I can also use internet.
    However this works great when I get onto my home WiFi along with cellular & 3G data switched on, I can make calls and also surf the net with the WiFi.
    Is anyone having similar issue? I am sure there is something with the office WiFi but what could it be to get my phone out of service.
    Any thoughts anybody ?
    Thanks,
    UG

    Yes I shutdown WiFi and I can connect to 3G on Cellular. I can make calls.
    If I shutdown Cellular and connect WiFi. I can make calls.
    Its just that when both are ON, then no calls can be made.
    All combinations work good with Home WiFi. 
    -UG

  • HT5706 I have not used my apple tv in a few years, and just got it out of the bag. I connected it up, and it cannot set date, time.  it also does not interact with the remote.  Could it be as simple as a new batter is needed for remote?

    I have not used my Apple TV in a few years, and just got it out of the bag to use on a new TV.  I connected it up to power and with an HDMI cable toTV.  It attempts to set date and time and cannot.  I cannot get the remote to interact with the box also.  Could it be something as simple as needing a new battery?

    Hi kybriar,
    Thanks for using Apple Support Communities.  This article has steps you can take to troubleshoot the remote itself:
    Troubleshooting the Apple Remote
    http://support.apple.com/kb/ht1722
    For the issue of setting the date and time, these articles may help:
    Apple TV: Basic troubleshooting
    http://support.apple.com/kb/ht1551
    Reset Apple TV by unplugging it from the power outlet, waiting about five seconds, then plugging it in again.
    Power off your TV, wait five seconds, then power it back on.
    Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connectionshttp://support.apple.com/kb/TS4546
    Ensure that Apple TV is within range of your Wi-Fi router or base station.
    Confirm that your Wi-Fi router and cable/DSL modem are connected to power and turned on.
    Make sure other devices (computers, iPhone, iPad, for example) are able to connect to the Wi-Fi network and access the Internet.
    Check your Wi-Fi network settings on Apple TV:
    Select Settings > General > Network > Wi-Fi and press the center button on the remote to display nearby networks.
    Choose your Wi-Fi network from the list.
    If your Wi-Fi network uses a password, make sure you are entering it correctly.
    Restart your Apple TV by selecting Settings > General > Restart.
    Try restarting your Wi-Fi router or modem by turning it off and then on again.
    If possible, connect an Ethernet cable and verify your Internet connection. If you can connect to the Internet using an Ethernet connection, verify that your Apple TV is using the latest software by selecting Settings > General > Software Update. If your Apple TV can be updated, install the update and then try the steps again.
    Cheers,
    - Ari

  • HT1418 I have iPod4 and cannot see day-to-day appointments, etc on PC Outlook calendar.  Only repeated items (birthdays, anniversaries, etc.) are visible.  Where is the rest of my data and how do I restore it to the only calendar I have in Outlook?

    I have iPod4 and cannot see day-to-day appointments, etc on PC Outlook calendar.  Only repeated items (birthdays, anniversaries, etc.) are visible.  Where is the rest of my data and how do I restore it to the only calendar I have in Outlook?
    Thanks

    Hello Schimi. The Time Capsule is a kind of product that offer you two possibility:
    - To use the TC as a router or as an external HD.
    The difference between WPA and WPA 2 are:
    - They are two kinds of internet connection.
    WPA uses dynamic key encryption , which means that the key is constantly changing and makes the invasion of a wireless network more difficult than WEP . WPA is considered one of the highest levels of wireless security for your network and is recommended if your devices support this kind of encryption . Newer routers offer WPA2 security . WPA2 is compatible with WPA , but offers higher security level . In fact, it meets the high standards of many government agencies . If the router and computer support WPA2 , this should be your choice.
    If you need any help or if you find some difficult setting up it you can contact Apple Support.
    I am sure that they can help you with that.
    I am sory for the delay. I holpe that you solve your issue.

  • I recently got an Ipod touch model A1213 and I cannot figure out how to get apps on it. I have tried everything and when I try to update software, it says Im already up to date, but my software version is only 1.1.5. How do i fix it?

    I recent recieved and Ipod touch model A1213 and i cannot figure out how to get apps on it. I have tried everything i can think of and when i try to update my ipod software it tells me that its already up to date. even though its only 1.1.5. How do i fix it?

    You have a 1st generation iPod Touch.
    It can be updated to 3.1.3 by purchase. See here Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

  • I have received an error message from an attached USB hard drive (not Time Capsule) stating "Disk Name" cannot be repaired. Back up your data and reformat. I opened the Disk Utility in an attempt to repair the disk but am advised that the disk "could not

    I have received an error message relating to an attached USB hard drive (not a back up and not Time Capsule) advising that "disk name" cannot be repaired. Back up your data and reformat. When I attempted to verify the disk with Disk Utility, I was advised that the disk could not be unmounted. What can I do to repair the disk?
    Write Status is Read/Write
    SMART Status is Not Supported
    Partition Map Scheme is Master Boot Record
    HELP!
    timothy7712

    You need something stronger, such as DiskWarrior, TechTools Pro, or Data Rescue.

Maybe you are looking for