Data base program
Is there a free easy to use data base program I can use to keep track of the books my wife reads. She is constantly borrowing books she has already read.
I would like to make her a list to check against. The program should alphabetize automatically as the titles are added.
I almost totally forgot about Delicious Library. I own it actually. It uses your iSight camera to scan in title, author, etc and can do all the things that you asked about in your post.
http://www.delicious-monster.com/
Hope this is helpful.
JB
Similar Messages
-
What program to replace a Data Base program like old AppleWorks?
Not sure if this is the correct discussion board, but I would like to find out what applications people are using to replace the AppleWorks Data Base program. In the past I have worked with File Maker Pro and the AppleWorks program. I see nothing like that in either iBook or Numbers.
Thanks,
DaveLike Dennis, I continue to use AppleWorks for what iWork doesn't do. I think that sooner or later a system upgrade may render AppleWorks useless or, at least, too unstable. I plan on keeping at least one Mac in the house running an OS AppleWorks works in.
In the meantime, I have left a few feedback posts to both the Numbers team or the Pages team. -
Simple Data Base Program for Mountain Lion
Does anyone have a recommendation for a simple data base program that will import comma delimited fields from early versions of Filemaker Pro (v 3.0, v5.0)
The ability to import Filemaker Templates and Layouts would be a big plus.
I do not need the a highly sophisticated program just something with the ability to import data from several different data bases and create layouts that look like I want them to look.
Also what is the earliest version of Filemaker that will run well on Mountain Lion ?
Thanks....KenI suggest Bento (by Filemaker), simple database, imports Filemaker Pro files and doesn't cost very much
-
Data base program with Leopard?
On my old G5 I used Apple Works data base program. I still have it on my new machine but wonder if there is a new data base program like Pages is the new WP program.
Thanks!
TMWNo, iWorks does not come with a database application - word processing, presentation, and spreadsheet.
If you need a high-powered database program there's a pretty good one in Open Office 3.0rc3 or NeoOffice Aqua. For a basic database program try iData. For one sort of in between try Bento - VersionTracker or MacUpdate. -
Logical Data base program Creation
Hi SAP-ABAP Experts,
when i tried to Save a Logical database created in SLDB. am getting the Runtime error.it was nt getting save.Can u Please try to Solve the Problem.
Regards,
kavitha.PHi
Kindly provide error what you are getting while saving LDB.
Regards
Md.MahaboobKhan -
I added a new name in Address Book of my Mac and Sync'd it to my Curve.
The "name" is Passport and I changed a phone # to Custom "number".
It moved the name over but none of the other data.
Any thoughts? I don't have enough data to go out and buy a data base program.
GaryWhen I send an email to a smart group - nothing other than the email address is sent right?
Yes. You should set Mail not to show all the addresses in the group.
AK -
Apple Works Data Base Replacement
Recently got a MacBook Pro going from 10.6.8 to 10.8.3. I had used the data base program in Apple Works for MANY things. I was told I would need to buy iWorks, but I can't see that it has a data base program. Any suggestions would be greatly appreciated.
Running Appleworks in Snow Leopard Server installed into Parallels 8 for use in Lion or Mt. Lion:
[click on image to enlarge]
Apple is now selling Snow Leopard Server for $19.99 + sales tax & shipping costs at 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only).
[NOTE: Feel free to copy/paste this post in the future, as my participation will start to diminish, now that my work is done here! Regards...] -
What is difference between data base structure and stucure in program
what is difference between data base structure and stucure declared in program level . can explain cleary if knows
Hi,
Data base structure is global decalaration you can reffer this structure in any of your developments, when ever you cahange this structure the changes automatically will get updated in all the programs.
coming to structures in program it is local to your program only, if you want to change the structure again you have to open the program and do the necessary changes.
Reward if useful.
Thanks,
Sreeram. -
How to stored data after clicking checkbox in data base table
REPORT ZT .
TYPE-pools: slis.
tables:mkpf,mseg,mard,COWB_COMP,ZTABLE.
Types:BEGIN OF tp_data,
mblnr LIKE mseg-mblnr,
matnr LIKE mseg-matnr,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
lgpbe LIKE mard-lgpbe,
charg LIKE mseg-charg,
bwart LIKE mseg-bwart,
budat LIKE mkpf-budat,
menge LIKE mseg-menge,
meins LIKE mseg-meins,
kostl LIKE mseg-kostl,
aufnr LIKE mseg-aufnr,
rsnum LIKE mseg-rsnum,
endkz like COWB_COMP-endkz,
END OF tp_data,
tp_tbl_data TYPE STANDARD TABLE OF tp_data.
MODIFIED*******************
DATA: WA TYPE TP_DATA.
MODIFIED*******************
*data: t_data like Y00_MM_ISSUE_DAT occurs 0 with header line.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
DATA: it_data TYPE STANDARD TABLE OF tp_data.
MODIFIED*******************
DATA : V_REPID LIKE SY-REPID.
MODIFIED*******************
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
*========================== Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
smatnr FOR mseg-matnr MODIF ID m2,
swerks FOR mard-werks MODIF ID m3,
slgort FOR mard-lgort MODIF ID m4,
slgpbe FOR mard-lgpbe MODIF ID m5,
scharg FOR mseg-charg MODIF ID m6,
sbwart FOR mseg-bwart MODIF ID m7,
skostl FOR mseg-kostl MODIF ID m8,
saufnr FOR mseg-aufnr MODIF ID m9,
srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
pse RADIOBUTTON GROUP radi,
bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
MODIFIED*******************
INITIALIZATION.
V_REPID = sy-repid.
MODIFIED*******************
*=========================== Event Blocks
AT selection-SCREEN.
start-OF-selection.
PERFORM get_data USING it_data.
END-OF-selection.
PERFORM build_alv USING it_data t_heading.
*=========================== Subroutines
*& Form get_data
Gets the information to be shown in the report.
FORM get_data USING t_data TYPE tp_tbl_data.
SELECT msegmblnr msegmatnr mardwerks mardlgort mard~lgpbe
msegcharg msegbwart mkpf~budat
msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM mseg
JOIN mard ON mardmatnr EQ msegmatnr
JOIN mkpf ON msegmblnr EQ mkpfmblnr
WHERE mseg~matnr IN smatnr.
ENDFORM. " get_data
*& Form build_alv
Builds and display the ALV Grid.
FORM build_alv USING t_data TYPE tp_tbl_data
t_heading TYPE slis_t_listheader.
ALV required data objects.
DATA: w_title TYPE lvc_title,
w_comm TYPE slis_formname,
w_status TYPE slis_formname,
x_layout TYPE slis_layout_alv,
t_event TYPE slis_t_event,
t_fieldcat TYPE slis_t_fieldcat_alv,
t_sort TYPE slis_t_sortinfo_alv.
REFRESH t_fieldcat.
REFRESH t_event.
REFRESH t_sort.
CLEAR x_layout.
CLEAR w_title.
Field Catalog
PERFORM set_fieldcat2 USING:
1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
2 'MATNR' 'MATNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
3 'WERKS' 'WERKS' 'MARD' space space space space space space
space space space space space space t_fieldcat,
4 'LGORT' 'LGORT' 'MARD' space space space space space space
space space space space space space t_fieldcat ,
5 'LGPBE' 'LGPBE' 'MARD' space space space space space space
space space space space space space t_fieldcat ,
6 'CHARG' 'CHARG' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
7 'BWART' 'BWART' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
8 'BUDAT' 'BUDAT' 'MKPF' space space space space space space
space space space space space space t_fieldcat,
9 'MENGE' 'MENGE' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
10 'MEINS' 'MEINS' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
11 'KOSTL' 'KOSTL' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
12 'AUFNR' 'AUFNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
13 'RSNUM' 'RSNUM' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
14 'ENDKZ' 'ENDKZ' 'COWB_COMP' space space 'select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
Layout
x_layout-zebra = 'X'.
Top of page heading
PERFORM set_top_page_heading USING t_heading t_event.
Events
PERFORM set_events USING t_event.
GUI Status
w_status = ''.
User commands
w_comm = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
PERFORM set_order USING 'MBLNR' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = V_REPID
it_fieldcat = t_fieldcat
is_layout = x_layout
it_sort = t_sort
i_callback_pf_status_set = w_status
i_callback_user_command = w_comm
i_save = 'X'
it_events = t_event
i_grid_title = w_title
TABLES
t_outtab = t_data
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " build_alv.
*& Form set_top_page_heading
Creates the report headings.
FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
t_events TYPE slis_t_event.
DATA: x_heading TYPE slis_listheader,
x_event TYPE LINE OF slis_t_event.
Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Reporte Prueba'(001).
APPEND x_heading TO t_heading.
Program name
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Program: '.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-FORM = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
ENDFORM.
*& Form set_events
Sets the events for ALV.
The TOP_OF_PAGE event is alredy being registered in
the set_top_page_heading subroutine.
FORM set_events USING t_events TYPE slis_t_event.
DATA: x_event TYPE LINE OF slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
ENDFORM.
*& Form set_order
Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname = p_tabname.
x_sort-UP = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM. "set_order
*& Form set_fieldcat2
Adds an entry to the field catalog.
FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname
p_ref_tabname
p_outputlen p_noout
p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
p_hotspot p_showasicon p_checkbox p_edit
p_dosum
t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-HOTSPOT = p_hotspot.
wa_fieldcat-CHECKBOX = p_checkbox.
wa_fieldcat-ICON = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given is a data
*element.
If p_ref_tabname is given, the ref_fieldname given is a field of a
*table. In case ref_fieldname is not given, it is copied from the
*fieldname.
IF p_ref_tabname IS INITIAL.
wa_fieldcat-rollname = p_ref_fieldname.
ELSE.
wa_fieldcat-ref_tabname = p_ref_tabname.
IF p_ref_fieldname EQ space.
wa_fieldcat-ref_fieldname = wa_fieldcat-fieldname.
ELSE.
wa_fieldcat-ref_fieldname = p_ref_fieldname.
ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF NOT p_edit IS INITIAL.
wa_fieldcat-INPUT = 'X'.
wa_fieldcat-EDIT = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM. "set_fieldcat2
*& Form top_of_page
Called on top_of_page ALV event.
Prints the heading.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'TRVPICTURE04'
it_list_commentary = t_heading.
ENDFORM. " alv_top_of_page
*& Form user_command
Called on user_command ALV event.
Executes custom commands.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
case sy-ucomm.
WHEN '&DATA_SAVE'.
LOOP AT IT_DATA INTO WA WHERE ENDKZ = 'X'.
IF WA-ENDKZ = 'X'.
*******MODIFIED*********************************
U DELETE THIS CODE N USER UR INSERT CODE TO CHECK
SY-MSGV1 = WA-MBLNR. " U CAN DELETE
SY-MSGV2 = WA-MATNR. " U CAN DELETE
MESSAGE ID 'BC_BOR' TYPE 'I' NUMBER '888' " U CAN DELETE
WITH SY-MSGV1 SY-MSGV2. " U CAN DELETE
*******MODIFIED*********************************
INSERT ZTABLE.
ENDIF.
endloop.
ENDCASE.
ENDFORM. "user_command
this is my code, database will stored in fields only.data is empty,
how to slove that one,send any sugestion.Hi Lakshmi,
Can u explain briefly what is ur requirement. U mean to say that after clicking the checkbox in data base table or Screen?
Regards,
Jayaram... -
i have been using CView Manager 11 to do my reports and is relatively easy to setup reports to the data base, but not all of my reports work with this program plus there is no user manual available. So I am trying to switch over to Chrystal Reports 11 with little success. I can not figure out how to setup the data base server with this program. I am trying to access the McKesson IntelliShelf Supply (Supply Scan) data base server. Is there anyone that can help me with this?
McKesson is an OEM partner of ours. I suggest you ask them how to.
-
Creating a Single Report from Oracle Data Base and BI Answers
Hi,
I wanted to create a single report by using a BI Report where in we have project and Activity columns,now I want to add column with Program to see the results.Program data is in Oracle Database.
Can some one help me how to create the report.
ii.How to edit a pivot table in BI word designer.What I am doing present is creating every time a new report.
Thx In Adv.
From SravanHi Pivot table was a general question.Is is nothing to do with the qus 1.
See I have a report which have a programme and Activity.So I need to get the data of Prject from Data base how to do this in BIP.....I am not using any pivot table here. -
How can i read data in DCS data base
I have logged current and voltage in dcs data base. I want to read that voltage with respect to time and plot in voltage Vs current graph. but i have a ploblem to read that data in dcs libary. can any one help me please.
Thanks & Regard
Nitin JainI can't claim to know much about visual C# Net, but I do know a bit about pagemaker. It really can't handle equations. there are a few work arounds involving things like baseline shifts and multiple text boxes, but generally equations were created in different programs and placed in pagemaker in picture or eps files. Either way the chances of extracting usable data out of pagemaker is very slim.
Jay -
Performance problem in select data from data base
hello all,
could you please suggest me which select statement is good for fetch data form data base if data base contain more than 10 lac records.
i am using SELECT PACKAGE SIZE n statement, but it's taking lot of time .
with best regards
srinivas rathodHi Srinivas,
if you have huge data and selecting ,you could decrease little bit time if you use better techniques.
I do not think SELECT PACKAGE SIZE will give good performance
see the below examples :
ABAP Code Samples for Simple Performance Tuning Techniques
1. Query including select and sorting functionality
tables: mara, mast.
data: begin of itab_new occurs 0,
matnr like mara-matnr,
ernam like mara-ernam,
mtart like mara-mtart,
matkl like mara-matkl,
werks like mast-werks,
aenam like mast-aenam,
stlal like mast-stlal,
end of itab_new.
select fmatnr fernam fmtart fmatkl gwerks gaenam g~stlal
into table itab_new from mara as f inner join mast as g on
fmatnr = gmatnr where gstlal = '01' order by fernam.
Code B
tables: mara, mast.
data: begin of itab_new occurs 0,
matnr like mara-matnr,
ernam like mara-ernam,
mtart like mara-mtart,
matkl like mara-matkl,
werks like mast-werks,
aenam like mast-aenam,
stlal like mast-stlal,
end of itab_new.
select fmatnr fernam fmtart fmatkl gwerks gaenam g~stlal
into table itab_new from mara as f inner join mast as g on f~matnr =
gmatnr where gstlal = '01'.
sort itab_new by ernam.
Both the above codes essentially do the same function, but the execution time for code B is considerably lesser than that of Code A. Reason: The Order by clause associated with a select statement increases the execution time of the statement, so it is profitable to sort the internal table once after selecting the data.
2. Performance Improvement Due to Identical Statements Execution Plan
Consider the below queries and their levels of efficiencies is saving the execution
tables: mara, mast.
data: begin of itab_new occurs 0,
matnr like mara-matnr,
ernam like mara-ernam,
mtart like mara-mtart,
matkl like mara-matkl,
werks like mast-werks,
aenam like mast-aenam,
stlal like mast-stlal,
end of itab_new.
select fmatnr fernam fmtart fmatkl gwerks gaenam g~stlal
into table itab_new from mara as f inner join mast as g on f~matnr =
gmatnr where gstlal = '01' .
sort itab_new.
select fmatnr fernam
fmtart fmatkl gwerks gaenam g~stlal
into table itab_new from mara as
f inner join mast as g on f~matnr =
gmatnr where gstlal
= '01' .
Code D (Identical Select Statements)
tables: mara, mast.
data: begin of itab_new occurs 0,
matnr like mara-matnr,
ernam like mara-ernam,
mtart like mara-mtart,
matkl like mara-matkl,
werks like mast-werks,
aenam like mast-aenam,
stlal like mast-stlal,
end of itab_new.
select fmatnr fernam fmtart fmatkl gwerks gaenam g~stlal
into table itab_new from mara as f inner join mast as g on f~matnr =
gmatnr where gstlal = '01' .
sort itab_new.
select fmatnr fernam fmtart fmatkl gwerks gaenam g~stlal
into table itab_new from mara as f inner join mast as g on f~matnr =
gmatnr where gstlal = '01' .
Both the above codes essentially do the same function, but the execution time for code B is considerably lesser than that of Code A. Reason: Each SQL statement during the process of execution is converted into a series of database operation phases. In the second phase of conversion (Prepare phase) an execution plan is determined for the current SQL statement and it is stored, if in the program any identical select statement is used, then the same execution plan is reused to save time. So retain the structure of the select statement as the same when it is used more than once in the program.
3. Reducing Parse Time Using Aliasing
A statement which does not have a cached execution plan should be parsed before execution; this parsing phase is a highly time and resource consuming, so parsing time for any sql query must include an alias name in it for the following reason.
1. Providing the alias name will enable the query engine to resolve the tables to which the specified fields belong to.
2. Providing a short alias name, (a single character alias name) is more efficient that providing a big alias name.
Code E
select jmatnr jernam jmtart jmatkl
gwerks gaenam g~stlal into table itab_new from mara as
j inner join mast as g on jmatnr = gmatnr where
g~stlal = '01' .
In the above code the alias name used is j .
4. Performance Tuning Using Order by Clause
If in a SQL query you are going to read a particular database record based on some key values mentioned in the select statement, then the read query can be very well optimized by ordering the fields in the same order in which we are going to read them in the read query.
Code F
tables: mara, mast.
data: begin of itab_new occurs 0,
matnr like mara-matnr,
ernam like mara-ernam,
mtart like mara-mtart,
matkl like mara-matkl,
end of itab_new.
select MATNR ERNAM MTART MATKL from mara into table itab_new where
MTART = 'HAWA' ORDER BY MATNR ERNAM MTART MATKL.
read table itab_new with key MATNR = 'PAINT1' ERNAM = 'RAMANUM'
MTART = 'HAWA' MATKL = 'OFFICE'.
Code G
tables: mara, mast.
data: begin of itab_new occurs 0,
matnr like mara-matnr,
ernam like mara-ernam,
mtart like mara-mtart,
matkl like mara-matkl,
end of itab_new.
select MATNR ERNAM MTART MATKL from mara into table itab_new where
MTART = 'HAWA' ORDER BY ERNAM MATKL MATNR MTART.
read table itab_new with key MATNR = 'PAINT1' ERNAM = 'RAMANUM'
MTART = 'HAWA' MATKL = 'OFFICE'.
In the above code F, the read statement following the select statement is having the order of the keys as MATNR, ERNAM, MTART, MATKL. So it is less time intensive if the internal table is ordered in the same order as that of the keys in the read statement.
5. Performance Tuning Using Binary Search
A very simple but useful method of fine tuning performance of a read statement is using Binary search addition to it. If the internal table consists of more than 20 entries then the traditional linear search method proves to be more time intensive.
Code H
select * from mara into corresponding fields of table intab.
sort intab.
read table intab with key matnr = '11530' binary search.
Code I
select * from mara into corresponding fields of table intab.
sort intab.
read table intab with key matnr = '11530'.
Thanks
Seshu -
Importing music, artwork and data base from external hard drive
I purchased a MacBook to use primarily as a music server. I have an external hard drive with over 300GB of music files ripped from CDs in Apple Lossless with a computer using Windows XP. I also have another external hard drive formatted for the Mac. My goal is to attach both drives to the MacBook via USB and transfer the music files, album art, and iTunes data base from the Windows system hard drive to the new Mac formatted hard drive. Then I am going to reformat the Windows system hard drive to the Mac format and use it as a back up for the other hard drive. Has anyone ever done something similar? If so, I would appreciate some guidance. If possible, I want to do the above so that the file names and artwork from the Windows itunes system do not get changed or left out when making the transfer to the Mac system. All music files will still be in ALAC. Thanks to all for your help.
Lots of programs out there from which to choose. In the meantime, don't access the drive.
18 Free Data Recovery Software Tools
-Jerry -
Logical Data Base to be used in the QUICKVIEWER
hello Abappers,
My client cannot select text fields using SQVI so he wants me to come up with a way for him to do so. I was thinking of creating a logical data base which can be selected in SQVI. I could build the FM READ_TEXT into the QV but what I need clarification on is outputting the text fields because the logical data base is really a set of table joins and since I am using the QV I do not have the flexibility that I would have if I was using a logical data base in a program.
Please advise if anybody has any ideas on this approach and how I would structure the output.
regardsHi Santhosh,
Since you say you are a beginner, lets start this way, hopefully U know from what datasources in ECC or R/3 you are supposed to load data from. Once you are sure about it, then follow this steps.
1) Go to RSA5 transaction in ECC or R/3 System ( source system ).
2) Select the specific datasource from which data is to be extracted to BI and press Activate Datasources button on the top right.
3) Then on check whether this datasource is available in RSA6 screen.
4) Come to BI system, there go to the Source Systems screen, there select the specific Source System (ECC or R/3).
Go to U'r specific Infoarea i.e., SCM in that select the datasource for which U are supposed to extract data, right click and select Replicate Metadata.
5) Once replication is done now right click again on datasource and create and run the infopackage , if its BI 7.0 data will be extracted till PSA.
6) After this create Transformation by right clicking on the Datasource again. Since I guess U will be using standard datasource U will get automatic transformations between the source fields and the infoobjects. Activate Transformations.
7) After this Create a DTP process by again right clicking on the Datasource. Here U specify the Data Target to which data is to be loaded.
8) Activate the DTP, once that's done successfully, Execute the DTP by clicking the Execute Button in the DTP.
9) Monitor U'r data loading thru Monitor screen.
Hope this helps.
Regards,
Syed
Maybe you are looking for
-
I just bought a new computer. Itunes only offers me the option of erase and sync, as I can only have it sync'd with one computer. I want to move my music to this computer from my ipod. Is this possible, or do I have to go back to my cds and upload
-
Trying to find an efficient way to share all our music with 2 different apple ids
My wife and I are trying to make more space in the house and burn all of our CDs to itunes (we have close to 800 cds). We do have separate apple ids and separate itunes accounts on our laptops (pc's). We have (2) iphone 5s, our son's ipod touch, and
-
First bill payment due date?
Hello, I haven't received my first bill yet by mail but the verizon app/website tells me how much I owe and also the due date on jan 7, 2013. Does this mean my due date is on the 7th of every month or only for this first bill?
-
Oracle RAC Nodes getting reboot in case of preferred controller failed
When we are disconnecting both Fiber cable from preferred Controller A or plugging out Controller A card from Disk Array(IBM DS 4300), After 90 seconds both the servers are rebooting. In this time complete RAC network is going out of service for appr
-
PIX Redundant Internet Line and Load balancing
I would like to find out if it's possible to configure my Cisco PIX 525 to use a secondary internet line from a different provider and perform load balancing. I'm using PIX Version 6.3(1)