Data bing between components.

i have two compoent queryComp and ResultComp.
how to sharing the context between them.

Hi Shashidhar,
I have a similar requirement. When I confirm an employee in the component (ICCMP_EMP_DETL) we want to navigate to the interaction record component( ICCMP_BT_INR).
Please guide us in what we need to do ? Is there something we can change in the Nav bar?
Thanks,
Prasoon

Similar Messages

How to pass data between components?

Hi everyone,
How can I pass data between components? If possible, please
give me sample code. Thanks.
Note: I am using Flex 3.
May

There are lots of examples in the doc. You can start here:
http://livedocs.adobe.com/flex/3/html/mxmlcomponents_advanced_1.html
Stephen

Does table STPOX contain parent-child relationship between components

Hello
I need to get a list of components of SO BOM.
FM CS_BOM_EXPL_KND_V1 exports an output table STPOX.
Does this table contain parent-child relationship between components? If yes , can somebody tell me which fields contain parent child id.
thanks

Hi,
STPOX is not a table, it is a structure & hence there is no storing of data in a structure. The table which stores this info is STPO.
To get the link you can refer to STPO-STLNR & pass this value to MAST-STLNR, this way you can link the child with its parent.
Regards,
Vivek

Passing data to parent components

Howdy folks,
I'm basically attempting to pass data between components.
Passing data from a parent component to a child component is easy
enough but I have run into a few problems with attempting the
opposite.
Goal :-
In more detail, I have the parent component which contains an
accordian. Each accordian pane is a component within itself. The
first accordian pane is a search component that users can search
for a customer's site address and make a selection from a data
grid. When a user selects a customer from the grid, I wish to pass
the Site ID of that selection to the second accordian pane to
display that sites full details.
Problem :-
The way in which I have attempted to do this is by passing
the selection (the site ID) to a bindable variable (called SiteID)
in the parent component which contains the accordian (using
parent.SiteID = event.currentTarget.selectedItem.SiteID) to then
pass it to the second accordian pane where the site's details can
be displayed but I get an "Undefined property" error.
I believe a way to do this is by using a custom event for the
search component but I am hoping there is a more straight forward
way to do this.
Any help would be greatly appreciated.
Many thanks.

I think events are the best approach to your problem, you
could also use the
parent or
parentApplication properties to acces the parent component.
I think you can use Application.application and that one references
your parent application too.
I will insist that using events is the best solution, but
feel free to try the other solutions
Hope it helps u out

Who worked with ICS' Model 4896 GPIB? I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

Hello. Most of the engineers in developer exchange are more familiar
with NI products. Contacting ICS for technical support is a better
course of action.

Data reconciliation between R/3 and the BW Systems

How do we do data reconciliation between R/3 and the BW system for the following areas?
Purchasing
Controlling:
Project System:
COPA
SD
AP
Trgards,
Tony G

Tony
Have you looked these documents??
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20validate%20infocube%20data%20by%20comparing%20it%20with%20psa%20data
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7a5ee147-0501-0010-0a9d-f7abcba36b14
Re: BW v. R/3 data reconciliation
Hope this helps
Thanks
Sat

Report for date variances between delivery and goods receipt date

dear guru ,
i search a standard report for date variances between delivery date in the purchase order and the goods receipt date.
Do you help me ?
Thanks

Hi,
Use Report ME80FN and here check the delivery schedule option in output screen.

Error 33172 occurred at Read & Write data transfer between two or more PF2010 controller

Hi,i need to do data transfer between two or more FP2010 controller.e.g. FP2010(A) & FP2010(B).
FP2010(A) need to transfer the measurement (from its I/O module) to FP2010(B) to do the data analysis.These data transfer should be synchronous btw two controller to prevent data lost.
From the vi used in the attachment,i encountered some problems at:
(1) Error 33172 occurred while publishing the data.Can i create and publish data under different item name?
(2) How to synchronies the read & write btw contorller?
All controller are communicating with each other directly without the need of a host computer to link them together
Is there any other method to do fast data transfer betwe
en controller?

Hi YongNei,
You were succesful in omiting enough information to make it very difficult to answer!
Please post your example.
Please tell us what version of LV-RT you are using.
Please define what you concider "fast data transfer".
Have you concidered mapping the FP tags of FP2010(A) to FP2010(B) and vise versa?
WHat exactly has to be syncronized?
If you have something that is close to working, share that.
Well, that as far as I can go with the info you have provided. Depending on the details, what you are asking could be anything from trivial to impossible with the currently available technology. I just can't say.
It would probably be a good idea to start over with a fresh question (sorry) because not many people are going to know what a a "
PF2010" is and I can not guarentee that I will be able to get back to you personally until next week-end.
Trying to help you get an answer,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How can I set the data binding between Web Dynpro & Database table

Dear friend,
I am a beginner of Web Dynpro. I want to develop my simple project like these:
1. Create my own database table via Dictionary Project such as TAB_USER and have 3 fields: USER_ID, USER_NAME, USER_POSITION and I have already deployed & archived it.
2. Create my own Web Dynpro Project, and create the input fields as User ID, User name, User position and icon 'Save' on the selection screen and I have deployed it already.
For the process, I want to input data at the screen and save the data in the table, please give me the guide line like these:
1. How can I set the data binding between Web Dynpro and Database table ?
2. Are there any nescessary steps that I will concern for this case?
Sorry if my question is simple, I had try to find solution myself, but it not found
Thanks in advances,
SeMs

Hi,
You can write your own connection class for establishing the connection with DB.
Ex:
public class ConnectionClass {
static Connection con = null;
public static Connection getConnection() {
try{
Context ctx = new InitialContext();
DataSource ds = (DataSource) ctx.lookup("jdbc/TSPAGE");
con = ds.getConnection();
return con;
}catch(Exception e){
return null;
You can place the above class file in src folder and you can use this class in webdynpro.
You can have another UserInfo class for reading and writing the data into the DB .
Regards, Anilkumar
PS : Refer
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/java/simple java bean generator for database.pdf
Message was edited by: Anilkumar Vippagunta

Data sync between exchange 2003 and exchange 2013

Need assistance on a general direction.
There is a 2003 domain with exchange 2003 currently in use. On this domain there is also a contact management application that is heavily integrated and cannot be update at this time. I would like to bring up a new 2013 exchange server.
Is there a method that I could have user data synchronized between the 2013 exchange data and the 2003 exchange? In this manner users could use the 2013 exchange as primary and the Contact manage application could use the sync copy of exchange 2003. For
now I am only concerned about he the calendar however I am sure the other information will need to be sync as well.
Please let me know. Thank you.

Hi There,
Once you install Exchange 2013 it will use the same data your Exchange 2003 is using \ seeing because both of them use Active directory for Directory information.
Exchange 2013 will see all the users that are 2003 without you needing to sync \ move data.
If you need to users to be on Exchange 2013 and keep Exchange 2003 all you need to do is move the mailboxes to Exchange 2013.
Cheers,
Exchange Blog:
www.ntweekly.com
MCSA, MCSE, MCITP:SA, MCITP:EA, MCITP:Enterprise Messaging Administrator 2010,MCTS:Virtualization

How can we do the data migration between Oracle Applications and SAP R/3.

Hi All,
How can we do the data migration between Oracle Applications and SAP R/3 system.What are all the possible ways to move bulk data from Oracle Apps to SAP r/3 system.
Provide any 3rd party tools which supports data migration and also pls rpovide the SAP's own data migration tools with supports the above feature.
Awaiting for best possible solution.
Thanks in advance.
Regards
Dharmaraju

the 3rd party tool is ETL , you can use ETL tool and the prepare the load files then you can use LSMW method to upload the data to SAP.

How can I encrypt my data links between switch uplink ports ? I'm unable to use "cts Manual" command in C3560X switch.suggest me

How can I encrypt my data uplinks between switch trunk ports ? I'm unable to use "cts Manual" command in C3560X switch.suggest me as I want to encrypt my switch-to-switch link with Cisco TrustSec.

Hi
Login to switch & go to interface..
There you can give tags.. (ISL & DONT1Q)
Command switch-port mode trunk
Switch-port trunk encapsulation ssl or dot1Q

Remote Desktop cannot verify the identity of the computer because there is a time or date diffrence between your computer and remote computer

Hello.....
I'm not able to log into Windows Server 2008 r2 server thorugh Remote Desktop connection, receiving below error message.
This issue is with only three servers in the environment
"Remote Desktop cannot verify the identity of the computer because there is a time or date diffrence between your computer and remote computer......"
The date/time is correct on the server when i checked in the console session of the server
Can see below messages in event logs
Event ID 1014:
"Name resolution for the name XYZdomain.com timed out after none of the configured DNS servers responded."
Event ID 1053:
The processing of Group Policy failed. Windows could not resolve the user name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
Any thoughts ....

Hi,
Have you tried to connect these three servers with IP address instead of computer name or DNS name?
Check Remote Desktop Connection settings: Option-->Advanced-->Connect from anywhere-->Settings-->Connection Settings-->Select “Do not user an RD Gateway server”
For more information please refer to following MS articles:
Remote Desktop cannot verify the identity of the remote computer because there is a time or date difference between your computer and the remote computer
http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/c1f64836-5606-49b0-82eb-56be7f696520
Cannot connect via Remote Desktop
http://social.technet.microsoft.com/Forums/en-US/windowsserver2008r2general/thread/5087e897-8313-468c-ad37-ef18b87d4dd6
Lawrence
TechNet Community Support

Data mapping between sybase and xml

I want to make a data mapping between sybase relational data result set and xml.
I am using the function ForXmlTree for this purpose, I have the entire documentation about the synatx and usage of it, but i need to know what support does JAVA have for it.
What files need to be installed .
This is an example of using the function
java jcs.xmlutil.ForXmlTree �i forxmltree-spec [-o output-script-file] \
[-x output-document-file -S server-name]
does anyone know where can i find the jcs.xmlutil package. If so let me know.
Thanks in advance
Sandeep

PRPS-PSPNR = AFVU-PROJN.
also you can use this fm.
BAPI_PROJECT_GETINFO

VPD date issue between 10.1 and 10.2 databases

I have uncovered an issue today with VPD against date fields. The issue came up at a client site on a 10.2 database. When I got back to the hotel and tried this on my own database, which is 10.1, I got no issue and everything worked ok.
Therefore, I am asking if anyone is able to try out the following for me on different Oracle databases and platforms and let me know whether it worked for you or not. I'd like to compile a list of database versions and platforms on which the issue occurs.
Step 1: create this table as a user
CREATE TABLE TST_DATE AS (
SELECT 1 PERSON_UID,
Trunc(SYSDATE) BIRTH_DATE,
To_Char(Trunc(SYSDATE), 'DD-MON-YYYY') CHAR_DATE,
123456 TAX_ID,
'Smith, Michael B.' FULL_NAME FROM dual);
Step 2: grant select rights on the table
GRANT SELECT ON TST_DATE TO PUBLIC;
Step 3: switch your login to SYS and run this script:
CREATE OR REPLACE FUNCTION F_CHECK_ITEM_TST(p_object_schema in varchar2, p_object_name varchar2)
RETURN VARCHAR2 IS
V_PREDICATE VARCHAR2(2000) := '1 = 2';
BEGIN
RETURN(V_PREDICATE);
END F_CHECK_ITEM_TST;
Step 4: As SYS, run this to grant access rights over the function
GRANT EXECUTE ON F_CHECK_ITEM_TST TO PUBLIC;
Step 5: As SYS, run this to enable the policy
BEGIN DBMS_RLS.ADD_POLICY(
OBJECT_SCHEMA => 'DRAKE',
OBJECT_NAME => 'TST_DATE',
POLICY_NAME => 'SecByTST',
FUNCTION_SCHEMA => 'SYS',
POLICY_FUNCTION => 'F_CHECK_ITEM_TST',
STATEMENT_TYPES => 'SELECT',
POLICY_TYPE => DBMS_RLS.DYNAMIC,
SEC_RELEVANT_COLS => 'BIRTH_DATE',
SEC_RELEVANT_COLS_OPT => DBMS_RLS.ALL_ROWS);
END;
Note: in the above policy change the OBJECT_SCHEMA name to be the name of the user who owns the table you created in Step 1
Step 6: Go into Discoverer Admin and import the table as a new folder.
Be sure to uncheck the "Date hierarchies" box and set "Default aggregate on data points" to detail. Grant access to any user.
Step 7: Using Desktop or Plus, log in as that user then try to query the folder with the date not included, there should be no problem.
Step 8: Now try to query with the date included
On my 10.2 database I get ORA-24334: no descriptor for this position. This happens when logged into Discoverer as the table owner, EUL owner or any other user. However, when logged into Discoverer as SYS which is exempt from all VPD policies, there is no error when the date is included.
We tried this in Discoverer Desktop, Plus and Viewer with the same results in all three. We can successfully query the table from SQL*Plus, SQL Developer and TOAD.
There also seems to be no issue at all with the 10.1 database so there seems to be an issue between Discoverer and the 10.2 database.
What do you think?
P.S. to cancel the policy use this script when logged in as SYS:
EXEC DBMS_RLS.drop_policy(
OBJECT_SCHEMA => 'DRAKE',
OBJECT_NAME => 'TST_DATE',
POLICY_NAME => 'SecByTST');
This same information is available on my blog in a more readable format here:
http://learndiscoverer.blogspot.com/2006/12/vpd-date-issue-between-101-and-102.html

Hi Rod
Well don't you just love Oracle. Obviously, whatever tests were done for certifying Discoverer against the 10.2 database did not include checking VPD policies. This merits a blog entry from me.
Your workaround for V_PREDICATE VARCHAR2(2000) := 'BIRTH_DATE=TO_DATE(''01-JAN-0001'')'; works. However, I had to write a new function to do this because my real function was trapping about a dozen items at the same time, some dates, some numbers and some varchars - exactly the way that the Oracle example code shows it in the 10.2 database manual.
So what I did was to create a new function that only handles dates and added a dedicated policy that works with only that function. Unfortuately, because I have many dates to manage, I was unabe to hard code the BIRTH_DATE so here is what I did:
V_PREDICATE VARCHAR2(2000) := 'SYSDATE = TO_DATE(''01-JAN-0001'')';
This works perfectly and Discoverer stopped complaining. It just has two policies on the same table for different data items. Isn't VPD cool? I'm hooked.
I really appreciate your time and effort on this. Now, let's see what Oracle support make of the issue because I raised a service request last night. No reply yet I'm afraid.
Best wishes
Michael

Data bing between components.

Similar Messages

Maybe you are looking for