Data Collection to Word Report array indexing

Hi guys,
Just need a bit of help deciding if I am measuring what i'm supposed to be. I'm trying to write the code for an automated collection of results, before i get the equipment to do it.
Basically, I will have 3 voltages going into analog inputs and one digital input going into my DAQ.
Two of the analog inputs need a single voltage recorded every minute for a hour. (at the minute i think my code samples one voltage every half second for 5 seconds, but i can easily change the timings of the loop) 
Does the array indexing i'm using seperate the voltages read from each channel -  ie does the top index array (index 0) read the voltage from aI0? 
By enabling indexing at the edge of the for loop i think i'm passing the single voltage (from each channel) read every loop iteration into the report graph, am i?
Any help would be most appreciated
Thanks,
Christian
p.s. This thread contains the whole problem i am trying to solve: http://forums.ni.com/t5/LabVIEW/Multiple-analog-inputs-performing-different-tasks/m-p/1163471#M50845...
p.s. I realise i have posted this question in another thread already, but i did that by mistake!
"If anyone needs me, I'll be in the Angry Dome!"
Attachments:
DAQ to report.vi ‏183 KB

Hi,
The task description is very confusing.
- Why you use update mode Delete All? -- Why not delete uploaded data or Overwrite? -- incoming data are already discriminating by the cons unit, where is overlapping?
- Why you need to add a new characteristic to the selection of target like company? You have a ConsUnit, an Investee unit etc. Why a new char?

Similar Messages

  • Report Manager - Data collection

    Hi,
    I'm having problems with data collection on a number of servers.
    Essentially, I've configured data logging on a number of servers
    by creating a job in the 'Manage jobs' window, using the task type
    'data logging' and running it against a number of hosts.
    Unfortunately, when I look at the 'data collection' window via report
    manager, a number of host entries have an excamation mark attached
    which implies that data has not been collected. If I look at the attribute editor for one of the logged entries on an affected server, the history tab
    clearly states that the 'Save History as Disk_File' is ticked.
    Any ideas?

    I have also seen this issue. Some of these issues were fixed by checking
    DNS. For data collection to work both forward and reverse DNS must work
    for the agent. If there is a mismatch or missing DNS it doesn't work.
    If there is a mismatch in DNS sometimes a re-discovery is required.
    Hi,
    I'm having problems with data collection on a
    number of servers.
    Essentially, I've configured data logging on a number
    of servers
    by creating a job in the 'Manage jobs' window, using
    the task type
    'data logging' and running it against a number of
    hosts.
    Unfortunately, when I look at the 'data
    collection' window via report
    manager, a number of host entries have an excamation
    mark attached
    which implies that data has not been collected. If I
    look at the attribute editor for one of the logged
    entries on an affected server, the history tab
    clearly states that the 'Save History as Disk_File'
    is ticked.
    Any ideas?

  • CHaRM Reporting Data Collection Background Job

    Hi CHaRM Gurus,
    I saw lot of thread about data collection for CHaRM Reporting using /tmwflow/Config_lock. Question is do we need to run everytime before run the report or is there anyway can schedule in background to collect data Asynch. There is a SAP Note 1269192 applied in both Solution Manager and Managed system. If any job to schedule what job and the ID to use run what authorization. Because this job need to collect transport request and objects, so definitely required different authorizations.
    Thanks
    RS

    Hi,
    The job is SM:TMWFLOW_CMSSYSCOL, program  /TMWFLOW/CMSSYSCOL2. The data collector program requires additional authorizations for Read RFC user you have defined for client '000' of the satellite systems.
    Authorization object: S_TRANSPRT
    ACTVT = 03 and TTYPE = <*> (full authorization)
    Refer to note 881553 for authorizations.
    Thanks & Regards,
    Kriti Bhalla

  • Web Analysis report error : Array Index out of range :1

    while running from workspace , below error is being thrown after making few changes to the layout (e.g. moving Measures from Page to Row ) though Design for HTML setting applied.
    Array Index out of range :1
    These reports are running well in WA studio.
    Can any one advise on this please.

    Array index out of range: 1The only time you will get that error is when you are accessing an elements index that is not present in the actual indexes in that array

  • Error opening web analysis report in workspace: Array index out of range:2

    I am able to view this report in web analysis studio with no errors..Its only when I go to workspace and open report do I get following error: Array index out of range:2.
    Any suggestions?

    Have you tried checking the "Design for HTML" from the Edit toolbar to see if you get any error when saving?
    Do you have any advanced items on the report, as there are 4 types of differences between Studio and HTML:
    - font differences, Workspace (DHTML) uses the WA Server fonts whereas WA Studio client machine fonts.
    - Service Buttons are very restricted using Workspace
    - Display: Tab selection, Splitter panels, Slider selection do not render in Workspace
    - Cannot restrict WA Tools menu in Workspace at all, where you can in the Studio.
    For exact details check out the Hyperion Web Analysis Studio User’s Guide from the Doc Library:
    http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_4.htm

  • Please help with creating a summary report from data collected in a fillable PDF form.

    I'm sure this has been asked before so I apologize in advance - I'm new to this forum and I'm not quite sure of which section I should be in. If I may just describe a certain scenario of something I am trying to create - could you please point me in the right direction?
    I'm looking to create a summary report/form to help me better organize my patients after each appointment. So data collected from other fillable forms I've created, will lead to the final page to print that will include selections from fillable text boxes or drop down lists, etc to basically summarize each encounter. It should go something like this:
    FORM 1:
    -pt chart #
    -pg age
    -purpose for visit
    -date of visit
    -diagnosis
    -prognosis
    -etc
    SUMMARY page
    On (-date of visit), patient (-pt chart #) arrived with complaint of (-purpose for visit)....
    The diagnosis was determined to be (-diagnosis), treatment to be performed is suggested to be (-treatment) with a (-prognosis) prognosis. Treatment was (accepted or not) and completed on... etc. etc... you get the idea
    Does anyone know how I can do this?
    Thank you all for your time and advice!

    I have downloaded Castor and got some good tutorials, but.......
    There is a problem, when I try to use the Marshaller to get an XML document the following error is reported:
    java.lang.NoClassDefFoundError: org/apache/xml/serialize/XMLSerializer
    I have scanned the Internet looking for a solution, some recommend including Xecers in the Classpath. I downloaded Xerces 2.7.1 and added it to as instructed but this did not work.
    Hope you can help

  • Measure Formulae for Uploadable and Data collection report

    Hi,
    I have query related to application of measure Formula for Uploadable and Data collection report.
    Consider a scenario where i use a MDX query to create a data collection report and I map these columns from these reports to an rowsource using a loader file. Can I use measure formula feature like onchange to work with Uploadable and Data colection reports such that changes to any one column should take effect in another column.
    Regrads,
    Wesley

    Wesley,
    IOP uploadable reports are used for sending data to the server in batch. They are coupled to the IOP model via a rowsource. You have a lot of flexibility with the spreadsheet you build for staging the upload. It's really just a function of how crafty you are with vb. Cascading changes from one column to another can be easily accomplished this way.
    Onchange formulas are for something else. They are part of the model definition and are used for describing how to cascade changes between IOP data blocks.

  • Why are date and time strings lost when indexing an array in a for loop

    Hi, 
    I have an application where i'm reformatting data from a spreadsheet for graphical display on a LabVIEW dashboard.
    the original spreadsheet has date and time values in separate columns, and i'm merging them and converting to a timestamp value.  But something's not working.  Does anyone know why the string value is lost when the array indexes into this for loop?
    Attachments:
    failed array index.png ‏142 KB

    Can you attach your VI with some typical values? (e.g. create in indicator on the 2D array, run your VI, then turn the indicator (now containing data) into a diagram constant). Place the FOR loop related code and that diagram constant into a new VI and attach it here.
    How many times does the FOR loop run? Could it be that the last element of each 1D array is an empty string? (unless you put a wait inside the FOR loop, you'll never see the other elements in the probe)
    LabVIEW Champion . Do more with less code and in less time .

  • DCH Report not showing what Data collection Value at Particular Operation

    Hello,
    I need one help regarding the DCH that is Device History Report, I am doing data collection at particular operation but when I look at DCH I can see all the Operation to that SFC but I canu2019t drill down to look what data I had enter as a part of Data collection.
    Regards
    Suhas

    Hello Suhas,
    Please make sure that you have configured Device History tab in User Preferences Maintenance.
    Regards,
    Alex.

  • Can I export the data collected in a PDF Form to a Word Template?

    I work in the legal field and constantly have to draft the same legal documents over and over. I would like to creat a form that allows me to collect the data I fill in as well as export that data into the word templates for legal document drafts. Is this possible?

    Hi,
    The Acrobat Forms forum would be a better target for your question:
    http://forums.adobe.com/community/acrobat/forms
    Regards,
    Brian

  • Performance Report Manager Data Collection Issues

    I have an agent running and collecting data in a circular file.... history.log
    Data Collection has failed approximately 6 days ago without warning. I have tried to find out the issue and have not had any success.
    If I open the Data Collection Window in PRM I see a Yellow triangle beside the hostname:port.
    If you can provide any information as to what to look for, please reply.

    history.log may be corrupted. If you run it through ccat to flatten it does it show any recent (i.e. newer than 6 days) entries?
    If ccat gives errors then just move it out of the way (i.e. rename it to history.log.busted) and restart your Agent. A fresh log will be created. Give it a couple hours to make a couple flushes of data to your SunMC Server and see if PRM works.
    Regards,
    Mike
    [email protected]

  • How to get last page number in word report? LV

    I'm trying to find out where am I when I use LV to generate word report. I would like automatic generate page index in front of report.
    Thanks in advance

    Ed,
    Are you using DIAdem with labview to generate your report in LabVIEW? If so can you please explain your setup a little more. If you aren't using DIAdem you may find more labVIEW users if you post on the LabVIEW forums: http://forums.ni.com/ni/board?board.id=170 . Either way let me know.
    Richard S -- National Instruments --Applications Engineer -- Data Acquisition with TestStand

  • Import-SPWeb Error - The string was not recognized as a valid DateTime. There is an unknown word starting at index 0

    Using the Export-SPWeb PowerShell command on a server to move a document library from one site colelction in a content database to another site collection in a seperate content database.
    Am using the following command:
    Export-SPWeb
    -Identity
    https://sp.bacl.net/legal/rr
    -Path
    \\bacvsspa01\backups\rr\rr.cmp
    -ItemUrl
    rr
    -IncludeVersions
    All
    -IncludeUserSecurity
    Not all documents are transferred hwoever. I get some errors like the following:
    [11/02/2014 2:21:44 PM] [ListItem] [16Jun11 17.32.09_BAC employees provid_Tom Heading.msg] Progress: Importing
    [11/02/2014 2:21:44 PM] [ListItem] [16Jun11 17.32.09_BAC employees provid_Tom Heading.msg]   Verbose: List URL: /legal/legal/rr
    [11/02/2014 2:21:44 PM] [ListItem] [16Jun11 17.32.09_BAC employees provid_Tom Heading.msg]   Error: The string was not recognized as a valid DateTime. There is an unknown word starting at index 0.
    [11/02/2014 2:21:44 PM] [ListItem] [16Jun11 17.32.09_BAC employees provid_Tom Heading.msg]   Debug:    at System.DateTime.Parse(String s, IFormatProvider provider)
       at System.Convert.ToDateTime(String value, IFormatProvider provider)
       at System.Runtime.Serialization.SerializationInfo.GetDateTime(String name)
       at Microsoft.SharePoint.Deployment.MetaInfoProperty..ctor(SerializationInfoHelper infoHelper)
       at Microsoft.SharePoint.Deployment.FileSerializer.GetMetaInfo(SerializationInfoHelper infoHelper)
       at Microsoft.SharePoint.Deployment.FileSerializer.CreateOrUpdateFile(Object fileOrListItem, SPLoggerObject loggerObject, SPWeb web, Guid id, String& fileUrl, Boolean fileExistsInDb, Boolean isFirstVersion, Boolean hasWebParts, SerializationInfoHelper
    infoHelper, SerializationInfoHelper infoHelperListitem, StreamingContext context)
       at Microsoft.SharePoint.Deployment.FileSerializer.CreateOrUpdateFileAndAssocData(Object fileOrListItem, SPLoggerObject loggerObject, SPWeb web, Guid id, String& fileUrl, Boolean fileExistsInDb, SerializationInfoHelper infoHelper, SerializationInfoHelper
    infoHelperListitem, StreamingContext context, ISurrogateSelector selector)
       at Microsoft.SharePoint.Deployment.ListItemSerializer.AddOrUpdateDoclibItem(SerializationInfoHelper infoHelper, SPListItem& listItem, SPLoggerObject loggerObject, SPWeb web, Guid newId, String& listItemServerRelativeUrl, Boolean bIsPublish,
    Boolean exists, StreamingContext context, ISurrogateSelector selector)
       at Microsoft.SharePoint.Deployment.ListItemSerializer.SetObjectData(Object obj, SerializationInfo info, StreamingContext context, ISurrogateSelector selector)
    I had a look in the .cmp file that was created (Changed extensions to .cab) and had a look at the Manifest.xml file. Relevant XML below:
    <SPObject Id="b18cc711-e5df-4ee7-9639-866e5b6613b0" ObjectType="SPFile" ParentId="1ad76e87-43e6-4cbf-a0a1-53af4975668f" ParentWebId="4be7e61f-b1c7-473f-acc3-0bae06e32024" ParentWebUrl="/legal/rr" Url="/legal/rr/rr/Employees
    giving First Aid/16Jun11 17.32.09_BAC employees provid_Tom Heading.msg">
            <File Url="rr/Employees giving First Aid/16Jun11 17.32.09_BAC employees provid_Tom Heading.msg" Id="b18cc711-e5df-4ee7-9639-866e5b6613b0" ParentWebId="4be7e61f-b1c7-473f-acc3-0bae06e32024"
    ParentWebUrl="/legal/rr" Name="16Jun11 17.32.09_BAC employees provid_Tom Heading.msg" ListItemIntId="37" ListId="020f8304-a50f-413b-be27-40d0ccc9e497" ParentId="1ad76e87-43e6-4cbf-a0a1-53af4975668f" TimeCreated="2011-11-16T07:02:00"
    TimeLastModified="2011-11-16T07:02:00" Version="1.0" CheckinComment="Loaded Using Dell Solutions for SharePoint" FileValue="00000013.dat" Author="29" ModifiedBy="24">
                <Properties>
                    <Property Name="vti_title" Type="String" Access="ReadOnly" Value="BAC employees providing first aid" />
                    <Property Name="source_item_id" Type="String" Access="ReadWrite" Value="source_item_id:1" />
                    <Property Name="vti_foldersubfolderitemcount" Type="Integer" Access="ReadOnly" Value="0" />
                    <Property Name="Attach Count" Type="String" Access="ReadWrite" Value="Attach Count:0" />
                    <Property Name="Created By" Type="Boolean" Access="ReadWrite" Value="Created By:BNE_AIR1\\jbrown" />
                    <Property Name="Importance" Type="String" Access="ReadWrite" Value="Importance:1" />
                    <Property Name="From1" Type="Time" Access="ReadWrite" Value="From1:Tom Heading" />
                    <Property Name="AttachCount" Type="String" Access="ReadWrite" Value="AttachCount:0" />
                    <Property Name="ContentTypeId" Type="String" Access="ReadWrite" Value="0x0101003699C96894FF79479322E4A235852946000530E240279BA54D8F621B39A4E09CF3"
    />
                    <Property Name="Modified By" Type="Boolean" Access="ReadWrite" Value="Modified By:BNE_AIR1\\jbrown" />
                    <Property Name="vti_folderitemcount" Type="Integer" Access="ReadOnly" Value="0" />
                    <Property Name="display_urn\:schemas-microsoft-com\:office\:office#Author" Type="String" Access="ReadWrite" Value="Jenny Brown"
    />
                    <Property Name="Document Created By" Type="Boolean" Access="ReadWrite" Value="Document Created By:BNE_AIR1\\jbrown" />
                    <Property Name="Created_x0020_By" Type="Boolean" Access="ReadWrite" Value="Created_x0020_By:BNE_AIR1\\jbrown" />
                    <Property Name="vti_cachedtitle" Type="String" Access="ReadOnly" Value="BAC employees providing first aid" />
                    <Property Name="Modified_x0020_By" Type="Boolean" Access="ReadWrite" Value="Modified_x0020_By:BNE_AIR1\\jbrown" />
                    <Property Name="ContentType" Type="String" Access="ReadWrite" Value="Legal Document" />
                    <Property Name="Attach_x0020_Count" Type="String" Access="ReadWrite" Value="Attach_x0020_Count:0" />
                    <Property Name="display_urn\:schemas-microsoft-com\:office\:office#Editor" Type="String" Access="ReadWrite" Value="Jenny Brown"
    />
                    <Property Name="vti_parserversion" Type="String" Access="ReadOnly" Value="15.0.0.4535" />
                    <Property Name="To" Type="Boolean" Access="ReadWrite" Value="To:Barry Peach" />
    <Property Name="From" Type="Time" Access="ReadWrite" Value="From:Tom Heading" />
                    <Property Name="Document Modified By" Type="Boolean" Access="ReadWrite" Value="Document Modified By:BNE_AIR1\\jbrown"
    />
                </Properties>
            </File>
        </SPObject>
    Now, looking at the source document library, this document has the field in question set to String, so why has it been marked as a Time filed type in the expiort file?
    Is anyone aware of any issues with the Export-SPWeb commandlet?
    SharePoint 2013 + March PU + AUG 2013 CU.
    Any help appreciated.

    Hi Richard,
    According to your description, the error occurred when you ran the Export-SPWeb command.
    I recommend to verify the things below for troubleshooting:
    Save the document library as an template(include content) and create a new document library based on the template, then run the Export-SPWeb command to export the new document library to see if the issue still occurs.
    Did this issue occur with other document library? If not, you can delete the string field with error, then run the Export-SPWeb command to narrow the issue scope.
    As a workaround, you can save the library as a template and deploy it to the site collection where you want to move the library, then create the new library in the site collection.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Supress details in subreport based on date ranges in main report

    I am using Crystal XI R2 and am working with Human Resources Data.
    The main report is grouped on and generates a list of temporary teaching positions like this:
    Smith, John
         FTE_____Start Date_______End Date
          .3 ______09/01/2007______10/20/2007
          .2 ______10/05/2007 ______04/15/2008
          .2 ______04/01/2008 ______06/30/2008
    The subreport (generated from a different source, but linked to main report on ) generates a list of days the employee worked as a Teacher on Call:
         TOC Date______ Portion of Day Worked
         09/05/2007______1.0
         09/19/2007______0.6
         10/08/2007______0.4
         10/09/2007______1.0
          04/08/2008______0.6
          04/18/2008______1.0
    Employees are granted seniority for TOC days worked, EXCEPT when they are already employed in a Teaching position >=.4 FTE  (because they are already granted full seniority for that period), so I need to be able to suppress records that fall within date ranges listed in the Main Report where the combine FTE is >=.4.     
    I believe this question has two parts:
    1. how do I evaluate the date ranges to combine overlapping periods?  Results would look like this... (I don't need to be able to see this, but I'm assuming I'd have to create a date range with the results in order to answer question #2 - but I haven't worked much with ranges.)
        FTE_____Start Date______End Date
          .3______09/01/2007______10/04/2007
          .5______10/05/2007______10/20/2007 
          .2______10/21/2007______03/31/2008
          .4______04/01/2008______04/15/2008
          .2______04/16/2008______06/30/2008
    2. how do I supress the TOC dates in the Subreport that fall within the start and end dates of all the employee's positions >= 0.4 FTE ?  Supreport results for this example would look like this...
         TOC Date______ Portion of Day Worked
         09/05/2007______1.0
         09/19/2007______0.6
         04/18/2008______1.0
    (I will sum the "portion" values and mulitply them by a constant variable to complete the seniority calculation.)
    Thank you in advance for any assistance you may be able to provide!

    Thanks for your help Graham, I have continued to work with this and I took the BO Crystal III course.  Your suggestions gave me a sense of  direction.
    I was not able to share a date range array with the subreport (kept getting error messages saying "call BO" , but I WAS able to share the startdate array and the enddate array.  I also shared the fte values array. 
    I had wanted to use a loop  to check
    if TOCdate in startarray[x] to endarray[x]
    then ftearray[x]
    and  sum the new range of fte[x] values so that I could suppress any TOCdates where fte was >=0.4.   But I couldn't quite get there, I kept coming up with formulas that displayed only the first value or the last or zero.
    So I used the following formula for each index (returnindex value had to be changed for each case), then added them all together.
    shared datevar array startArray;
    shared datevar array endArray;
    shared numbervar array FTEArray;
    local numbervar arraylength:= ubound(startArray);
    local numbervar i;
    local numbervar returnindex :=-1;
    If arraylength >=1 then
    if not({AAATDDET.Date} in startarray[1]to endarray[1])then
    0 else
    if {AAATDDET.Date} in startarray[1]to endarray[1] then
    (returnIndex:= i;);
    i:=i+1;
    if returnindex =0 then
    ftearray[1]

  • Printing word report

    i'm using LabVIEW 7.1 and Report Generation Toolkit for Microsoft Office 1.1.2
    my program is a stand-alone application that collects data and saves the data to a template in MS Word(using bookmark). It then print out the report.  Two problems occured that i don't understand:
    1. when the program sends data to word template only some data are entered in right bookmark, other bookmarks are either incorrect data or left blank.
    2. after finished putting data to word template the program generates "Error 1031 occured at Open VI Reference in Print Report.vi ->Main.vi"  
    Does anyone have any idea about this?

    i've resolved error 1031, but another error was generated.
    Here is the error message "Error 7 occured at Open VI Reference in Dispose Report.vi ->..."
    i'm sending attachment contains ...Word Report.vi and its subvis and a word template.
    Please put these vis in the same directory for it to run.
    And put 267.doc in a folder called Templates, and put Templates folder in the same directory as the vis.
    when running ...Word Report.vi make sure enter in number 267 for P/N.
    due to attachment limited i have to attach 267.doc in the next reply
    Attachments:
    Get App Path Local.vi ‏19 KB
    BE-Cal Word Report.vi ‏598 KB
    filter string.vi ‏17 KB

Maybe you are looking for