Data display error-APD to Cube

Hi All,
I have done data loading from APD to Cube successfully and able to see the data in cube. When created a query on the cube......in query results........keyfigures are displaed with Description ERROR....
i.e instead of displaying just 43,400. it is dsiplaying 43,400ERROR.......
Please suggest

Hi Raj,
I have faced the same issue. I had one key Figure called Sales Volume. Its value in the query result was displaying the same way as urs do.
The reason was the unit for the Key Figure was not properly maintained.
Check the data in cube whether Units for the key figures is maintained or not..
I hope this will help.

Similar Messages

  • Data display error in OBIEE -Generated query returns correct result on DB

    Hi experts,
    We are retrieving the data from cube based on MS SQL SERVER.
    When i generate the report in answers for the amount A(Sum in rpd) it display the amount 18 only and when i fire the generated MDX query on cube its shows amount as 144(18+126)..what could be the reason its hide the amount 126 at the time of display.
    any suggestion plz.
    Regards,
    S

    Hi,
    Can you please tell, which view you are using? Check the same report in Table view if there is any agg issue from report/RPD side.
    Regards,
    Kashi

  • Data display error in reports

    Hi,
    I've a serious problem. I've developed a new database.I've imported a .dmp backup file into my user from my previous database which was same although only certain new options have been added in the new database. The problem is I'm able to view all data but when i try to retrieve old data through reports, they aren't being displayed.If i enter any new data, they are displayed through reports but not the old data that were in the .dmp files.
    What could be the error?

    What happens If you try to run the same query from your reports in sql?

  • Data Load error ODS to Cube

    Hi
    Data Flow ODS-->Cube (Transformations)
    We replaced update rules with transformations.
    Fiscal Year Variant is mapped to Fiscal Year Variant
    FY Year mapped to FY Year
    FY Year/Period Mapped to FY Year/Period
    In Transformations we are getting Cal Month & Cal Year/Month from FY Year/Period  is routine.
    To get the First 4 Chars  and last 2 chars from  FY Year/Period  and to Cal Year/month using a routine
    Similaryly Cal Month as well from FY Year/Period  using routine.
    This is done in older Update rules as well...
    When tried to load data...i am gettying the below error
    "Fiscal Year Variant X is not maintained for Calendar lear 001"
    Please update how to fix this
    Thanks

    Nice copy/paste Mtl...
    when i post 'please search the forum'  this seems not tohelp
    when i post links to other posts, often my reply is removed as moderator don't won't to see a link collage
    therefor if a answer is available in previous post i copy/paste as for me this is only solution (however next time i'll mention the author)..i do not copy paste within the same thread hoping that the last post will receive the points...
    concerning the fact that i might not have red the question correctly...during all the time i have been using this forum  i have seen that question is not always the exact problem description...therefor i propose solutions even if on first glance they seem off the case....even more this error will only popup at the moment of checking master data. so if the dso is write optimized, or SID generation is turned off, the error will only show when loading to the cube and can be solved by transferrring the R/3 data. the fact that it concerns a load from dso to cube is then of no meaning.
    M.

  • Data Update Error in Inventory Cube

    Hi All,
    I am able to Load the data from InfoSource 2LIS_03_BX in the inventory cube, but when I tried to Load data from InfoSource 2LIS_03_BF in the Inv. cube, where thing seems to be fine QM Status is also Green but the data is not getting updated in the cube.
    What can be the reason for data no getting updated in the cube.
    Regards,
    Dev.

    hi,
    i am sending you the following links which consists some PDF's for Inventory control.it will give better understanding
    http://help.sap.com/saphelp_nw04/helpdata/en/5b/8dc73cee4fb55be10000000a114084/content.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/how to handle inventory management scenarios in bw.pdf
    http://www.horizons.bc.ca/ice/icemanual1_4.pdf
    reward if its useful
    Naveen

  • Dates display error

    My calendar month looks weird and I can't find out why.
    Can anyone tell me why this pink line is there and why that row has the dates like they are?
    How do I fix this:

    Ingó,
    The pink line represents the current week in Month view.
    Open System Preferences...>Language & Region> and set/re-set your "Region:" Also, make sure that all other settings are appropriate on that panel, and the "Advanced..." setting for General/Dates/Times.

  • Data display on remote cube

    Hi Guru's
    I've created a generic ds using fm for direct access.creating virtual cube and mapped accordingluy with ds.
    Now when I do test extract on ds per a single posting day then it takes few secords to pull through the data and the no. of records are 45 on dev box.But I do data display on remote cub and it takes long and throughing a timed out error.
    I dont have any routines on transformaions.
    What could be the problem?
    Nagesh.

    HI
    here's the code in FM
    Example: DataSource for table SFLIGHT
      TABLES: BKPF,BSEG.
    Auxiliary Selection criteria structure
      DATA: L_S_SELECT TYPE SRSC_S_SELECT.
    Maximum number of lines for DB table
      STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
    counter
              S_COUNTER_DATAPAKID LIKE SY-TABIX,
    Starting point for each data package
             READ_NEXT LIKE SY-TABIX,
    Total Number of Extracted Records
             NO_RECS LIKE SY-TABIX,
    Number read so far
             TEMP_CNTR(9) TYPE N.
    cursor
    S_CURSOR TYPE CURSOR.
    Select ranges
      RANGES: R_BLDAT FOR BKPF-BLDAT,
              R_BUDAT FOR BKPF-BUDAT,
              R_CPUDT FOR BKPF-CPUDT,
              R_BUKRS FOR BKPF-BUKRS,
              R_GJAHR FOR BKPF-GJAHR,
              R_BELNR FOR BKPF-BELNR.
      DATA: GT_T_DATA LIKE ZFI_GL_4 OCCURS 0 WITH HEADER LINE.
      DATA: GT_BKPF TYPE TABLE OF BKPF,
            GS_BKPF TYPE BKPF.
      DATA: COUNTER(9) TYPE N.
      DATA: LV_MONAT(3).
    Initialization mode (first call by SAPI) or data transfer mode
    (following calls) ?
      IF I_INITFLAG = SBIWA_C_FLAG_ON.
    Initialization: check input parameters
                    buffer input parameters
                    prepare data selection
    Check DataSource validity
        CASE I_DSOURCE.
          WHEN 'ZFI_GL_4'.
          WHEN OTHERS.
            IF 1 = 2. MESSAGE E009(R3). ENDIF.
    this is a typical log call. Please write every error message like this
            LOG_WRITE 'E'                  "message type
                      'R3'                 "message class
                      '009'                "message number
                      I_DSOURCE   "message variable 1
                      ' '.                 "message variable 2
            RAISE ERROR_PASSED_TO_MESS_HANDLER.
        ENDCASE.
        APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
    Fill parameter buffer for data extraction calls
        S_S_IF-REQUNR    = I_REQUNR.
        S_S_IF-DSOURCE = I_DSOURCE.
        S_S_IF-MAXSIZE   = I_MAXSIZE.
    Fill field list table for an optimized select statement
    (in case that there is no 1:1 relation between InfoSource fields
    and database table fields this may be far from beeing trivial)
        APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
      ELSE.                 "Initialization mode or data extraction ?
    Data transfer: First Call      OPEN CURSOR + FETCH
                   Following Calls FETCH only
    First data package -> OPEN CURSOR
        IF S_COUNTER_DATAPAKID = 0.
    Fill range tables BW will only pass down simple selection criteria
    of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
          LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BLDAT'.
            MOVE-CORRESPONDING L_S_SELECT TO r_bldat.
            APPEND R_BLDAT.
          ENDLOOP.
          LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BUDAT'.
            MOVE-CORRESPONDING L_S_SELECT TO R_BUDAT.
            APPEND R_BUDAT.
          ENDLOOP.
          LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CPUDT'.
            MOVE-CORRESPONDING L_S_SELECT TO R_CPUDT.
            APPEND R_CPUDT.
          ENDLOOP.
             LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BUKRS'.
            MOVE-CORRESPONDING L_S_SELECT TO R_BUKRS.
            APPEND R_BUKRS.
          ENDLOOP.
             LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'GJAHR'.
            MOVE-CORRESPONDING L_S_SELECT TO R_GJAHR.
            APPEND R_GJAHR.
          ENDLOOP.
              LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BELNR'.
            MOVE-CORRESPONDING L_S_SELECT TO R_BELNR.
            APPEND R_BELNR.
          ENDLOOP.
    Determine number of database records to be read per FETCH statement
    from input parameter I_MAXSIZE. If there is a one to one relation
    between DataSource table lines and database entries, this is trivial.
    In other cases, it may be impossible and some estimated value has to
    be determined.
          SELECT * FROM BKPF INTO TABLE GT_BKPF WHERE BLDAT IN R_BLDAT
                                                  AND BUDAT IN R_BUDAT
                                                  AND CPUDT IN R_CPUDT
                                                  AND BUKRS IN R_BUKRS
                                                  AND GJAHR IN R_GJAHR
                                                  AND BELNR IN R_BELNR.
          LOOP AT GT_BKPF INTO GS_BKPF.
            SELECT * FROM BSEG WHERE BELNR = GS_BKPF-BELNR
                               AND   BUKRS = GS_BKPF-BUKRS
                               AND   GJAHR = GS_BKPF-GJAHR.
              MOVE-CORRESPONDING GS_BKPF TO GT_T_DATA.
              MOVE-CORRESPONDING BSEG TO GT_T_DATA.
              CLEAR LV_MONAT.
              CONCATENATE '0' GT_T_DATA-MONAT INTO LV_MONAT.
              CONCATENATE GT_T_DATA-GJAHR LV_MONAT INTO GT_T_DATA-FISCPER.
              CALL FUNCTION 'BWFIU_GET_DOCUMENT_ORIGIN'
                EXPORTING
                  I_AWTYP    = GT_T_DATA-AWTYP
                  I_AWKEY    = GT_T_DATA-AWKEY
                IMPORTING
                  E_REFBELNR = GT_T_DATA-AWREF
                  E_REFGJAHR = GT_T_DATA-AWGJA
                  E_REFBUKRS = GT_T_DATA-AWBUK
                  E_REFKOKRS = GT_T_DATA-AWKOK.
    Lcal currency calculations.
              IF GT_T_DATA-SHKZG EQ 'S'.
                GT_T_DATA-DMSOL = GT_T_DATA-DMBTR.
                GT_T_DATA-DMSHB = GT_T_DATA-DMBTR.
                GT_T_DATA-DMHAB = 0.
              ELSEIF GT_T_DATA-SHKZG EQ 'H'.
                GT_T_DATA-DMHAB = GT_T_DATA-DMBTR.
                GT_T_DATA-DMSHB = GT_T_DATA-DMBTR * -1.
                GT_T_DATA-DMSOL = 0.
              ENDIF.
    Foriegn Currency calculations.
              IF GT_T_DATA-SHKZG EQ 'S'.
                GT_T_DATA-WRSOL = GT_T_DATA-DMBTR.
                GT_T_DATA-WRSHB = GT_T_DATA-DMBTR.
                GT_T_DATA-WRHAB = 0.
              ELSEIF GT_T_DATA-SHKZG EQ 'H'.
                GT_T_DATA-WRHAB = GT_T_DATA-DMBTR.
                GT_T_DATA-WRSHB = GT_T_DATA-DMBTR * -1.
                GT_T_DATA-WRSOL = 0.
              ENDIF.
              APPEND GT_T_DATA.
            ENDSELECT.
          ENDLOOP.
          DESCRIBE TABLE GT_T_DATA LINES NO_RECS.
          READ_NEXT = 0.
          TEMP_CNTR = 0.
        ENDIF.                             "First data package ?
    Fetch records into interface table.
        IF ( READ_NEXT GT NO_RECS ) OR ( NO_RECS EQ 0 ).
          REFRESH GT_T_DATA.
          CLEAR:S_COUNTER_DATAPAKID, COUNTER, READ_NEXT, S_S_IF, NO_RECS.
          RAISE NO_MORE_DATA.
        ENDIF.
        COUNTER = 0.
        LOOP AT GT_T_DATA FROM READ_NEXT.
          COUNTER = COUNTER + 1.
          IF COUNTER GT S_S_IF-MAXSIZE.
            IF TEMP_CNTR EQ NO_RECS.
              CLEAR: S_COUNTER_DATAPAKID,COUNTER,READ_NEXT,S_S_IF,NO_RECS.
              RAISE NO_MORE_DATA.
            ELSE.
              READ_NEXT = READ_NEXT + COUNTER.
            ENDIF.
            EXIT.
          ENDIF.
          MOVE-CORRESPONDING GT_T_DATA TO E_T_DATA.
          APPEND E_T_DATA.
          TEMP_CNTR = TEMP_CNTR + 1.
          iF TEMP_CNTR GT NO_RECS.
            CLEAR GT_T_DATA.
            CLEAR: S_COUNTER_DATAPAKID, COUNTER,READ_NEXT, S_S_IF,NO_RECS.
            RAISE NO_MORE_DATA.
            EXIT.
          ENDIF.
        ENDLOOP.
        S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
      ENDIF.              "Initialization mode or data extraction ?
    ENDFUNCTION.
    If it's a code then why it's quick on rsa3?
    Nagesh.

  • "Internal error: An unexpected exception has occurred" error message displayed when browsing a cube.

    “Internal error: An unexpected exception has occurred“ error message displayed when browsing a cube.
    The error behaviour is quite irregular and does not occur for specific condition.
    Will cumulative update 9 for SQL Server 2008 R2 (SP1) installation help to fix the issue which is provided on the below link:
    (http://support.microsoft.com/kb/2152148)
    The current version of SQL Server I am using is as below:
    Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64)   Jun 17 2011 00:54:03   Copyright (c) Microsoft Corporation  Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
    Thanks in advance for the help!

    Hi Mon,
    The hotfix you said is for Microsoft SQL Server 2008. So it will not work on your scenario since you are using SQL Server 2008 R2.
    Based on the limited information, we cannot give you the exact reason that cause this issue. In order to narrow down this issue, you can apply the latest Service Pack and Cumulative Update as GregGalloway said. Besides, you can troubleshoot this issue by
    using the Windows Event logs and msmdsrv.log.
    You can access Windows Event logs via "Administrative Tools" --> "Event Viewer".  SSAS error messages will appear in the application log.
    The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
    Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
    Data collection for troubleshooting Analysis Services issues
    Regards,
    Charlie Liao
    TechNet Community Support

  • Error while data loading in real time cube

    HI experts,
    I have a problem. I am loading data from a flat file.The data is loading correctly till the DSO but when i am trying to load it into the cube it is giving an error.
    The cube is  a real time cube for PLANING. I have chnaged the status to allow data loading but still the DTP is giving an error.
    It shows an error "error while extracting from DataStore" and some RSBK 224 ERROR and rsar 051 error.

    What was the resolution to this issue.  We rae having the same issue only with external system (not a flat file).  We get the  RSAR 051 with a return code of 238 error message, like it is not even getting to the rfc connection (DI_SOURCE).  We have been facing this issue for a while and even opened up a message with SAP.

  • View Display Error in OBIEE with Essbase Cubes

    Hi All,
    Currently we are generating the Reports from Essbase Cubes.
    We have an hierarchy in OBIEE and when we are trying to drill down one hierarchy(Tech Executive) we are getting below Error.
    " Error
    View Display Error
    Odbc driver returned an error (SQLExecDirectW).
    Error Details
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 96002] Essbase Error: Unknown Member [H1_Rel_TecExec_Ini_appl].[Unknown] used in query (HY000)
    SQL Issued: SELECT s_0, s_1, s_2, s_3, s_4, s_5 FROM ( SELECT 0 s_0, "Defect7M"."H1_Rel_TecExec_Ini_appl"."H1 Initiative Name" s_1, "Defect7M"."H1_Rel_TecExec_Ini_appl"."H1 Tech Executive" s_2, SORTKEY("Defect7M"."H1_Rel_TecExec_Ini_appl"."H1 Initiative Name") s_3, SORTKEY("Defect7M"."H1_Rel_TecExec_Ini_appl"."H1 Tech Executive") s_4, "Defect7M"."Defect7M#1"."Defect7M - measure" s_5 FROM "Defect7M" WHERE ("Defect7M"."H1_Rel_TecExec_Ini_appl"."H1 Tech Executive" = 'Unknown') ) djm "
    Can someone assist me how to resolve this error
    Thanks,
    SatyaB

    Satya,
    Have you done anything to modify the essbase drill logic within your BMM?
    Remember when modeling essbase you should just try to use the defaults first to ensure that all works correctly the first time through. Then you can adjust any hiearchies, federate, etc.

  • Error While loading data from 8 DSOname to Cube.

    Hi All,
    while loading data from 8<DSONAME> to CUBE , the data is Sucessfully loaded data into Cube, but the Request Status is shown in Yellow,why it is showing, please tell me how to make it Sucessfull.
    Thanks and Regards,
    santosh.

    HI All,
    In ST22 i'm getting Short Dump, the Error massage is
    MESSAGE_TYPE_X
    WHAT HAPPEN
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
    Error Analyis is:
    Short text of error message:
    Generic process chain
    Long text of error message:
    Technical information about the message:
    Message class....... "RSMPC"
    Number.............. 000
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
    "MESSAGE_TYPE_X" " "
    "CL_RSSM_LOADING===============CP" or "CL_RSSM_LOADING===============CM005"
    "IF_RSPC_EXECUTE~EXECUTE"
    there is any Patch Problem...
    Please let me Know how to resolve this issue.
    thanks and regards,
    santosh.

  • How do i get data when displaying error message in BDC

    hi,
    I have generated one internal table for displaying error message using BDCMSGCOLL, i want the the error to display according to the field name,
    Hw can i get it...
    ex: <Material name> Error message as name already created or unit doesnt exit...
    Pls reply,
    Regards,
    Divi.

    Hi Divya,
    Try the below
    CALL TRANSACTION 'MM01'
                        USING bdcdata
                        MODE   'N'
                        MESSAGES INTO MSGTAB.
    IF SY-SUBRC NE 0.
    move itab-matnr to jtab-matnr.
    append jtab.
    PERFORM CHECK.
    ENDIF.
    FORM CHECK.
    LOOP AT MSGTAB where msgtyp = 'E'.
    read table jtab index sy-index.
    write:/ jtab-matnr.
    CALL FUNCTION 'MESSAGE_PREPARE'
      EXPORTING
        LANGUAGE                     = sy-langu
        MSG_ID                       = MSGTAB-MSGID
        MSG_NO                       = MSGTAB-MSGNR
       MSG_VAR1                     = MSGTAB-MSGV1(50)
       MSG_VAR2                     = MSGTAB-MSGV2(50)
       MSG_VAR3                     = MSGTAB-MSGV3(50)
       MSG_VAR4                     = MSGTAB-MSGV4(50)
       IMPORTING
       MSG_TEXT                     = L_MSG
    EXCEPTIONS
       FUNCTION_NOT_COMPLETED       = 1
       MESSAGE_NOT_FOUND            = 2
       OTHERS                       = 3
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    WRITE:   L_MSG.
    ENDLOOP.
    ENDFORM.
    - Satish

  • I am getting ORA-01403: no data found error while calling a stored procedur

    Hi, I have a stored procedure. When I execute it from Toad it is successfull.
    But when I call that from my java function it gives me ORA-01403: no data found error -
    My code is like this -
    SELECT COUNT(*) INTO L_N_CNT FROM TLSI_SI_MAST WHERE UPPER(CUST_CD) =UPPER(R_V_CUST_CD) AND
    UPPER(ACCT_CD)=UPPER(R_V_ACCT_CD) AND UPPER(CNSGE_CD)=UPPER(R_V_CNSGE_CD) AND
    UPPER(FINALDEST_CD)=UPPER(R_V_FINALDEST_CD) AND     UPPER(TPT_TYPE)=UPPER(R_V_TPT_TYPE);
         IF L_N_CNT >0 THEN
              DBMS_OUTPUT.PUT_LINE('ERROR -DUPlicate SI-1');
              SP_SEL_ERR_MSG(5,R_V_ERROR_MSG);
              RETURN;
         ELSE
              DBMS_OUTPUT.PUT_LINE('BEFORE-INSERT');
              INSERT INTO TLSI_SI_MAST
                   (     CUST_CD, ACCT_CD, CNSGE_CD, FINALDEST_CD, TPT_TYPE,
                        ACCT_NM, CUST_NM,CNSGE_NM, CNSGE_ADDR1, CNSGE_ADDR2,CNSGE_ADDR3,
                        CNSGE_ADDR4, CNSGE_ATTN, EFFECTIVE_DT, MAINT_DT,
                        POD_CD, DELVY_PL_CD, TRANSSHIP,PARTSHIPMT, FREIGHT,
                        PREPAID_BY, COLLECT_BY, BL_REMARK1, BL_REMARK2,
                        MCC_IND, NOMINATION, NOTIFY_P1_NM,NOTIFY_P1_ATTN , NOTIFY_P1_ADDR1,
                        NOTIFY_P1_ADDR2, NOTIFY_P1_ADDR3, NOTIFY_P1_ADDR4,NOTIFY_P2_NM,NOTIFY_P2_ATTN ,
                        NOTIFY_P2_ADDR1,NOTIFY_P2_ADDR2, NOTIFY_P2_ADDR3, NOTIFY_P2_ADDR4,
                        NOTIFY_P3_NM,NOTIFY_P3_ATTN , NOTIFY_P3_ADDR1,NOTIFY_P3_ADDR2, NOTIFY_P3_ADDR3,
                        NOTIFY_P3_ADDR4,CREATION_DT, ACCT_ATTN, SCC_IND, CREAT_BY, MAINT_BY
                        VALUES(     R_V_CUST_CD,R_V_ACCT_CD,R_V_CNSGE_CD,R_V_FINALDEST_CD,R_V_TPT_TYPE,
                        R_V_ACCT_NM,R_V_CUST_NM ,R_V_CNSGE_NM, R_V_CNSGE_ADDR1,R_V_CNSGE_ADDR2, R_V_CNSGE_ADDR3,
                        R_V_CNSGE_ADDR4,R_V_CNSGE_ATTN,     R_V_EFFECTIVE_DT ,SYSDATE, R_V_POD_CD,R_V_DELVY_PL_CD,R_V_TRANSSHIP ,R_V_PARTSHIPMT , R_V_FREIGHT,
                        R_V_PREPAID_BY ,R_V_COLLECT_BY ,R_V_BL_REMARK1 ,R_V_BL_REMARK2,R_V_MCC_IND,
                        R_V_NOMINATION,R_V_NOTIFY_P1_NM, R_V_NOTIFY_P1_ATTN, R_V_NOTIFY_P1_ADD1, R_V_NOTIFY_P1_ADD2,
                        R_V_NOTIFY_P1_ADD3, R_V_NOTIFY_P1_ADD4, R_V_NOTIFY_P2_NM, R_V_NOTIFY_P2_ATTN, R_V_NOTIFY_P2_ADD1,
                        R_V_NOTIFY_P2_ADD2, R_V_NOTIFY_P2_ADD3, R_V_NOTIFY_P2_ADD4, R_V_NOTIFY_P3_NM, R_V_NOTIFY_P3_ATTN,
                        R_V_NOTIFY_P3_ADD1, R_V_NOTIFY_P3_ADD2, R_V_NOTIFY_P3_ADD3, R_V_NOTIFY_P3_ADD4,
                        SYSDATE,R_V_ACCT_ATTN,R_V_SCC_IND,R_V_USER_ID,R_V_USER_ID
                        DBMS_OUTPUT.PUT_LINE(' SI - REC -INSERTED');
         END IF;

    Hi,
    I think there is a part of the stored procedure you did not displayed in your post. I think your issue is probably due to a parsed value from java. For example when calling a procedure from java and the data type from java is different than expected by the procedure the ORA-01403 could be encountered. Can you please show the exact construction of the call of the procedure from within java and also how the procedure possible is provided with an input parameter.
    Regards, Gerwin

  • Data display grid font selection

    Does anyone know how to change the font that's used on the "Data" tab when displaying the content of rows in a table?
    I'm trying to view chinese characters which are stored in UTF-8 unicode in the database. I have all the necessary fonts loaded on my machine and the correct NLS_LANG settings.
    I can see western characters, arabic, russian, greek OK in the data-grid, but not chinese or other far-eastern languages. Instead I see little squares instead of the symbols.
    I've checked for font setting in Tools -> Preferences but the only setting I can find is under the "Code Editor" section. This is set correctly (to Arial Unicode MS) and if I copy the "little squares" from the data grid and paste them into a code-edit tab I see the characters correctly displayed.
    So it seems that the "Font" setting for the code-edit tabs isn't used by the data-display tabs.
    Is there a way of making both code-editor window and data-display tab use the same font?

    i would create a standard report.
    i presume the air pressure and humidity are from one field? if not create a formula to display that.
    create groups
    1- a/p humidity field or formula
    2- time
    3- ref-measure- error
    not sure if they are the same field or different.
    you can then place your data in the groups (formulas calcs etc)
    then underlay the groups so they appear on the same line
    then draw boxes around them.
    hope this helps

  • Data load from DSO to cube fails

    Hi Gurus,
    The data loads have failed last night and when I try to dig inside the process chains I find out that the cube which should be loaded from DSO is not getting loaded.
    The DSO has been loaded without errors from ECC.
    Error Message say u201DThe unit/currency u2018source currency 0currencyu2019 with the value u2018spaceu2019 is assigned to the keyfigure u2018source keyfigure.ZARAMTu2019 u201D
    I looked in the  PSA has about 50, 000 records .
    and all data packages have green light and all amounts have 0currency assigned
    I went in to the DTP and looked at the error stack it has nothing in it then I  changed the error handling option from u2018 no update,no reportingu2019 to u2018valid records update, no reporting (resquest red)u2019 and executed then the error stactk showed 101 records
    The ZARAMT filed has 0currency blank for all these records
    I tried to assign USD to them and  the changes were saved and I tried to execute again but then the message says that the request ID should be repaired or deleted before the execution. I tried to repair it says can not be repaired so I deleted it and executed . it fails and the error stack still show 101 records.when I look at the records the changes made do not exist anymore.
    If I delete the request ID before changing and try to save the changes then they donu2019t get saved.
    What should I do to resolve the issue.
    thanks
    Prasad

    Hi Prasad....
    Error Stack is request specific.....Once you delete the request from the target the data in error stach will also get deleted....
    Actually....in this case what you are suppose to do is :
    1) Change the error handling option to u2018valid records update, no reporting (resquest red)u2019 (As you have already done....) and execute the DTP......all the erroneous records will get sccumulated in the error stack...
    2) Then correct the erroneos records in the Error Stack..
    3) Then in the DTP----in the "Update tab"....you will get the option "Error DTP".......if it is already not created you will get the option as "Create Error DT".............click there and execute the Error DTP..........The Error DTP will fetch the records from the Error Stack and will create a new request in the target....
    4) Then manually change the status of the original request to Green....
    But did you check why the value of this field is blank....if these records again come as apart of delta or full then your load will again fail.....chcek in the source system and fix it...for permanent solution..
    Regards,
    Debjani......

Maybe you are looking for