Data In R/3 is present but not in BW

Hi experts i got thiss problem in last extraction i have 5 fields in r/3 which having data but in BW one feild is not getting data remain 4 r showing data what could be the problem ? n how to solve it?plz let me know
Thanks in advance. bye
jay

Hi,
This info may be helpful.
The first step should be to see if there was any filters when you ran the report (If you had viewed data thru a report).
Then proceed to see the contents of the infoprovider/table level in BW. See of data is there. If data is there in cube and not showing in report it may be an issue with report.
Check the data availabilty in the first level target.
As its found in R/3 and not in cube take a top down or bottom up apporach and follow the data flow path to see to what level data is populated, the presence of any filters in transformations,etc.
Check the data flow from source to target.
Check if any update or transfer routine available in the data flow.
Check the contents of all the targets in the data flow for this field.
Refer.
R/3 - BW reconcilation
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/968dab90-0201-0010-c093-9d2a326969f1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7a5ee147-0501-0010-0a9d-f7abcba36b14
Reconsilation
Please check this link for data reconcilation:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7a5ee147-0501-0010-0a9d-f7abcba36b14
Re: Reconcilation of data
strategies and methods to reconcile sap bw data to source systems .
http://bluestonestep.com/component/option,com_docman/task,doc_download/gid,7
thanks,
JituK

Similar Messages

Data source was activated and replicated but not showing up in RSA7.

Hello,
Data source was activated and replicated but not showing up in RSA7. At what point does the data source appear in the Delta Queue?
Thanks

Hi,
for LO,LIS,generic,FI data sources, delta records come from delta queue.
if u run the INIT in BW whether it may be success or not delta queue will be maintained in RSA7. and u can check the records in RSA7 or smq2.
when the init request goes to R/3 then it will maintains delta queue in RSA7.
assign points if it helps,
thanks,
pavan.

HT1937 my cellular data connection works in one location but not in another

Why does my iPhone's data connection work at other places but not at work?
It works sometimes.

Good question to ask your cell phone provider.. Maybe the material the building is made of is blocking the cellular data signal.

Getting a error ...data found in the main document but not in data source

Good morning .....
I am generating letters , calling wordpad from forms 6i......when it calls the wordpad document . it is saying that ...data found in the maindocument but not in the data source ...
but when i see manually in that wordpad data source is present .
please let me know .. if anyone know solution for this ......

thanks for the reply Grant....
yes it worked in simple case .. now i am trying to retrive a mutiple records in a single header .... so i used loops in the program ... i am getting this error now .
i am calling lst files ...
by using ole2

Can you check for data in one table or another but not both in one query?

I have a situation where I need to link two tables together but the data may be in another (archive) table or different records are in both but I want the latest record from either table:
ACCOUNT
AccountID     Name
123               John Doe
124               Jane Donaldson
125               Harold Douglas
MARKETER_ACCOUNT
Key     AccountID     Marketer    StartDate     EndDate
1001     123               10526          8/3/2008     9/27/2009
1017     123               10987          9/28/2009     12/31/4712    (high date ~ which means currently with this marketer)
1023     124               10541          12/03/2010     12/31/4712
ARCHIVE
Key     AccountID     Marketer    StartDate     EndDate
1015     124               10526          8/3/2008     12/02/2010
1033     125               10987         01/01/2011     01/31/2012
So my query needs to return the following:
123     John Doe                        10526     8/3/2008     9/27/2009
124     Jane Donaldson             10541     12/03/2010     12/31/4712     (this is the later of the two records for this account between archive and marketer_account tables)
125     Harold Douglas               10987          01/01/2011     01/31/2012     (he is only in archive, so get this record)
I'm unsure how to proceed in one query. Note that I am reading in possibly multiple accounts at a time and returning a collection back to .net
open CURSOR_ACCT
          select AccountID
          from
                 ACCOUNT A,
                 MARKETER_ACCOUNT M,
                 ARCHIVE R
           where A.AccountID = nvl((select max(M.EndDate) from Marketer_account M2
                                                where M2.AccountID = A.AccountID),
                                                  (select max(R.EndDate) from Archive R2
                                                where R2.AccountID = A.AccountID)
               and upper(A.Name) like parameter || '%'
<can you do a NVL like this?   probably not...   I want to be able to get the MAX record for that account off the MarketerACcount table OR the max record for that account off the Archive table, but not both>
(parameter could be "DO", so I return all names starting with DO...)

if I understand your description I would assume that for John Dow we would expect the second row from marketer_account ("high date ~ which means currently with this marketer"). Here is a solution with analytic functions:
drop table account;
drop table marketer_account;
drop table marketer_account_archive;
create table account (
    id number
, name varchar2(20)
insert into account values (123, 'John Doe');
insert into account values (124, 'Jane Donaldson');
insert into account values (125, 'Harold Douglas');
create table marketer_account (
    key number
, AccountId number
, MktKey number
, FromDt date
, ToDate date
insert into marketer_account values (1001, 123, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('27.09.2009', 'dd.mm.yyyy'));
insert into marketer_account values (1017, 123, 10987, to_date('28.09.2009', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
insert into marketer_account values (1023, 124, 10541, to_date('03.12.2010', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
create table marketer_account_archive (
    key number
, AccountId number
, MktKey number
, FromDt date
, ToDate date
insert into marketer_account_archive values (1015, 124, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('02.12.2010', 'dd.mm.yyyy'));
insert into marketer_account_archive values (1033, 125, 10987, to_date('01.01.2011', 'dd.mm.yyyy'), to_date('31.01.2012', 'dd.mm.yyyy'));
select key, AccountId, MktKey, FromDt, ToDate
     , max(FromDt) over(partition by AccountId) max_FromDt
from marketer_account
union all
select key, AccountId, MktKey, FromDt, ToDate
     , max(FromDt) over(partition by AccountId) max_FromDt
from marketer_account_archive;
with
basedata as (
select key, AccountId, MktKey, FromDt, ToDate
from marketer_account
union all
select key, AccountId, MktKey, FromDt, ToDate
from marketer_account_archive
basedata_with_max_intervals as (
select key, AccountId, MktKey, FromDt, ToDate
     , row_number() over(partition by AccountId order by FromDt desc) FromDt_Rank
from basedata
filtered_basedata as (
select key, AccountId, MktKey, FromDt, ToDate from basedata_with_max_intervals where FromDt_Rank = 1
select a.id
     , a.name
     , b.MktKey
     , b.FromDt
     , b.ToDate
from account a
join filtered_basedata b
    on (a.id = b.AccountId)
ID NAME                     MKTKEY FROMDT     TODATE
123 John Doe                  10987 28.09.2009 31.12.4712
124 Jane Donaldson            10541 03.12.2010 31.12.4712
125 Harold Douglas            10987 01.01.2011 31.01.2012
If your tables are big it could be necessary to do the filtering (according to your condition) in an early step (the first CTE).
Regards
Martin

Data exists in DSO New table but not in Active table

Guys,
I am loading data from one DSO to another DSO, in my target DSO I have 6 fields which 2 of them are mapped in Transformation and remaining 4 will be populated by Start routine and End routines. Before Activating I am seeing all 6 fields got populated in New data table but after activating I am only seeing the 2 fields in Active data table but not those that are populated through Start and End rouitnes.
I have only one Key in my DSO, am I missing something here?please let me know.
Thanks,
KK

Hi,
beside end routine, there will be one icon.
click on that.
you will see two options.
select the option "populate values into fields with out active transformation rules"
don't remember the words correctly but gives the same meaning...
Activate the transformation.
this will solve your problem
Regards,
Raghu
Edited by: Raghu tej harish reddy on May 2, 2009 11:10 PM

Thumbnails present but not populated with photo's

Help!
Both the Events and Photo thumbnail boxes are all present but they don't include the photo's. When I open events all the photo boxes are visible - but empty. Trying to open a photo results in a "!" indicator. Over 6,000 images at stake, any help appreciated.

Welcome to the Apple Discussions. The "!" means that the library has lost the file path to the original file. This happens when there has been an interruption to iPhoto while it is writing to it's database file, Library6.iPhoto. Moving, renaming files or folder inside the library package while in the Finder is another way you can get that indication. Try the three fixes below in order as needed:
1 - launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the first three options.
2 - rebuild the library using iPhoto Library Manager as follows:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 -Download iPhoto Library Manager and launch.
2 -Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: It may take some time to create the new library if you have a lot of photos. Report back on how long it took and how many photos you have in the library so we can give other users an idea of how long it may take.
3 - start over with a new library and import the Originals folder from your original library as follows:
Creating a new library while preserving the Events from the original library.
Move the existing library folder to the desktop.
Open the library package like this.
Launch iPhoto and, when asked, select the option to create a new library.
Drag the Originals folder from the iPhoto Library on the desktop into the open iPhoto window.
This will create a new library with the same Events as the original library if you have the Finder checkbox unchecked in the Events preference pane.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Data saved from PDF form printable but not readable?

I created a Reader extended PDF to send out to clients to collect data.
I must have done something wrong as when the forms are coming back, they forms are populated in OSX Preview, but not when opening the PDF in Acrobat.
When the form is printed, all data displays correctly.
Is this something to do with the way the form fields are formatted?
any help appreciated!!! Thank You
FILE IM HAVING TROUBLE WITH
Running Mac, Acrobat X Pro

For some reason when I click on the field in Acrobat the data shows?!
It's actually not printing either unless i print from Mac Preview and then it destroys the line height.
Any ideas?

Data plan used if MiFi connected but not actively being used?

If computer is on overnight but not in use, meaning MiFi connected, with that use up my data plan? Or does it use up with "active" use only? I'm sharing internet with other people so I'm not sure my data plan is being used on purpose or just getting eaten up while we are all asleep? I'm already maxed with 3 weeks to go!!!

As long as you have devices connected to the MiFi there is always a risk that those devices will consume data behind the scenes without your knowledge. This is how network connected devices work, they are constantly "in use" while connected. Computers, smart phones and any kind of internet connected devices are constantly backing up content, looking for updates and talking to other network devices. It has nothing to do with your active participation and all internet communication is held against you on your data plan.
The only way to completely stop data usage is to turn off your MiFi when it is not needed. This is a common safe practice that you should start using when on a metered data plan. MiFis are not intended to be left on 24x7 anyways, frequent reboots will help ensure the device stays in proper working order and increase the longevity of its life.
Verizon does provide everyone with a data log. The data log will provide you with time stamps and the amounts that are consumed at those times. It should be easy to see when your biggest spikes of consumption are. Isolate what devices are online during those times and what may have been going on and you can start to build a picture of where the problem lies.
To truly see the network traffic in terms of specific applications, web services or devices you need to find and install network monitors. Network monitors come in a variety of applications so you need to find and build a monitoring system that fits your environment. Considering you have other people connected to your MiFi it would not be uncommon for each of you to install a separate monitor specific to those machines.
Let me know if you have any other questions.

Attribute key cannot be found : Data present but not processed

Hi there,
I know this question has been ask several time and I went through a lot of proposed solution but none were successful in my case. My cube processed successfully for month but now I have the following error :
Errors in the OLAP storage engine: The attribute key cannot be found when processing: Table: 'EventMember', Column: 'Id', Value: '22560966'. The attribute is 'Id'.
To explain my case here what I've got.
A dimension [Member Unique] where there is a bigint Id and some attributes. The only defined attribute in the dimension is Id.
When I process fully this dimension the query issued by SSAS to SQL (using the profiler) is the following :
SELECT
DISTINCT
[dbo_Member].[Id] AS [dbo_MemberId0_0]
FROM [dbo].[Member] AS [dbo_Member]
I verified that the Id 22560966 is present in the table and in the resulting set and that is the case.
Then I have the measure group EventMember based on a named query doing the following :
SELECT Id
FROM dbo.Member AS m
WHERE EXISTS
SELECT 1 AS Expr1
FROM dbo.Event AS g INNER JOIN
dbo.MemberHistory AS h ON h.Id = g.MemberId INNER JOIN
dbo.MemberVersion AS v ON v.HistoryId = h.Id
WHERE (v.AntvoiceMemberId = m.Id)
This query returns also the row 22560966.
When I process fully the measure group EventMember the query issued by SSAS is :
SELECT [EventMember].[EventMember0_0] AS [EventMember0_0],[EventMember].[EventMemberId0_1] AS [EventMemberId0_1]
FROM
SELECT 1 AS [EventMember0_0],[Id] AS [EventMemberId0_1]
FROM
SELECT Id
FROM dbo.Member AS m
WHERE EXISTS
SELECT 1 AS Expr1
FROM dbo.Event AS g INNER JOIN
dbo.MemberHistory AS h ON h.Id = g.MemberId INNER JOIN
dbo.MemberVersion AS v ON v.HistoryId = h.Id
WHERE (v.AntvoiceMemberId = m.Id)
AS [EventMember]
AS [EventMember]
And it crashes during the process giving me the above error.
I did try to allow missing key attribute error in the process option, and it ran successfully. It allowed me to issue an MDX statement on my cube to check if the dimension member was present. And it was not the case. Hence the error I think. The MDX statement
was :
SELECT [Member Unique].[Id].&[22560966] on 0
FROM MyCube
The the final question would be : Why this member which is returned by the SQL query is not present in my dimension ?
I tried deletiong my cube it did not changed a thing. A noticeable thing is that the faulty attributes key are the same every time.

Hi RodolpheAV,
The error means SSAS could not find a record in the dimension table [table name] where column [column name] contained value [value]. For more information, you can look into the following articles:
Error messages when you try to process a database or a cube in SQL Server 2005 Analysis Services: "The attribute key cannot be found" and "The record was skipped because the attribute key was not found:
http://support.microsoft.com/kb/922673
SSAS Quick Reference: Attribute Key Cannot Be Found:
http://www.ssas-info.com/analysis-services-articles/66-mgmt/1963-ssas-quick-reference-attribute-key-cannot-be-found
TechNet Subscriber Support
If you are TechNet Subscription user and have
any feedback on our support quality, please send your feedback here.
Regards,
Bin Long
TechNet Community Support

ISight camera present but not working

System Report lists the camera but it's X'd out
in FaceTime and not present in Skype. After
re-setting NVRAM it appeared briefly then
vanished. Some advise re-setting the SMC
but Apple's own KB didn't support that.

Tom Meade1 wrote:... I followed all steps...
Good. Having eliminated several of the easiest things, we will try the next (more time consuming) things that may resolve your problem.
Tom Meade1 wrote: ... this is our faith, no?...
Not mine, no.
Tom Meade1 wrote:... System Report shows what I think is a camera...
You are correct that your SR report shows that your Mac recognized its inbuilt camera.
Tom Meade1 wrote:... Does it seem like a software issue that can be remedied...
Yes.
Tom Meade1 wrote:... does the Genius have methods beyond what we've done here?...
Yes. The Geniuses have access to proprietary Special Tools, Test Equipment, and Technical Data that allow them to fix things beyond what us users can do. That is why, if all else fails, or if you don't want to take the time to continue trying to resolve this yourself, I suggest you contact Apple or an Apple-Authorized Service Provider for service.
Tom Meade1 wrote:... FaceTime and PhotoBooth still show no camera or X'd out...
Because more than one up-to-date app fails in more than one user account, your Mac's system software may be damaged. The remedy for this is to reinstall OS X. Regardless of the reinstall method you use, backup your Mac before you reinstall OS X.
If your Mac shipped with OS X 10.7, you can use the backup installer that came with your Mac. Then apply the 10.7.5 Combo Update to return to the latest version in one update step. I recommend that you repair permissions before and after installing and updating.
If you do not have a 10.7.x installer, you can use the Lion Recovery HD method Kappy explains in http://discussions.apple.com/thread/3531813.
After reinstalling, test again using the How to Troubleshoot iSight method.
If the problem continues in more than one app and more than one user account, the only remaining thing I know that might remedy the problem is to zero your startup disk and do a clean install of your Apple software. If iSight works then, you know that some other software was causing a conflict. This is a time consuming process that I described in this topic: http://discussions.apple.com/message/18614637. (You will use the current 10.7.5 Combo Update vs. the 10.7.4 version that was current at the time of the referenced post.)
If none of the things recommended to this point resolve your iSight problem, the only remaining suggestion I can offer is to contact Apple or an Apple-Authorized Service Provider for service.
Tom Meade1 wrote:... Is a required to activate iSight?
No.
Message was edited by: EZ Jim
Mac OSX 10.9

Data Services job rolling back Inserts but not Deletes or Updates

I have a fairly simple CDC job that I'm trying to put together. My source table has a record type code of "I" for Inserts, "D" for deletes, "UB" for Update Before and "UP" for Update After. I use a Map_CDC_Operation transform to update the destination table based on those codes.
I am not using the Transaction Control feature (because it just throws an error when I use it)
My issue is as follows.
Let's say I have a set of 10,000 Insert records in my source table. Record number 4000 happens to be a duplicate of record number 1. The job will process the records in order starting with record 1 and begin happily inserting records into the destination table. Once it gets to record 4000 however it runs into a duplicate key issue and then my try/catch block catches the error and the dataflow will exit. All records that were inserted prior to the error will be rolled back in the destination.
But the same is not true for updates or deletes. If I have 10000 deletes and 1 insert in the middle that happens to be an insert of a duplicate key, any deletes processed before the insert will not be rolled back. This is also the case for updates.
And again, I am not using Transaction Control, so I'm not sure why the Inserts are being rolled back, but more curiously Updates and Deletes are not being rolled back. I'm not sure why there isn't a consistent result regardless of type of operation. Does anyone know what's going on here or what I'm doing wrong/what my misconception may be?
Environment information: both source and destination are SQL Server 2008 databases and the Data Services version we use is 14.1.1.460.
If you require more information, please let me know.

Hi Michael,
Thanks for your reply. Here are all the options on my source table:
My Rows per commit on the table is 10,000.
Delete data table before loading is not checked.
Column comparison - Compare by name
Number of loaders - 1
Use overflow file - No
Use input keys - Yes
Update key columns - No
Auto correct load - No
Include in transaction - No
The rest were set to Not Applicable.
How can I see the size of the commits for each opcode? If they are in fact different from my Rows per commit (10,000) that may solve my issue.
I'm new to Data Services so I'm not sure how I would implement my own transaction control logic using a control column and script. Is there a guide somewhere I can follow?
I can also try using the Auto correct load feature. I'm guessing "upsert" was a typo for insert? Where is that option?
Thank you very much!
Riley

Date format accepted in new table but not in active table for DSO, BI 7.0

Hi All,
Need help from the experts, i was trying to load Flate file data in CSV(Coma separated) and cell type general for dates(yyyymmdd). everything was fine i have a routine for new fields in DSO for Fiscal week and Fiscal Quater which is calculating based on my Flate file date i.e delivery date(yyyymmdd).
The New table of DSO means before activation everything was fine and all the logics and mappings working for the Fiscal week and Fiscal Quater and that can be visible, But after activation the same only the Fiscal week and Fiscal Quater is not showing data, its comming as blank and '000000' for all records.
As the Fiscal week and Fiscal Quater is maintained as custmised InfoObject with data type NUM.
Can you tell what i am missing, because i tried with different cell type also in CSV File.
Thanks and Regards,
Taps
Edited by: Taps on Oct 1, 2010 1:21 PM

Resolved...!!!
Follow the link ...
/people/maheshsingh.mony5/blog/2010/09/24/update-behavior-of-end-routine-in-transformations
Regards,
Taps
Edited by: Taps on Oct 1, 2010 2:02 PM

Data refreshed when preview in XLF but not refreshed in exported SWF

Hi,,
I have an XML file linked to Exel which is the source of an XLF file. All connections are OK and I am able to see the latest data are being refreshed when I preview the XLF file.But when I exported the XLF file to SWF file, the error 2048 occured and the data is not refreshed at all.
I have put the SWF file in the Global Security Settings Panel (Always Allow list) and also checked the Every Time I visit the webpage under the Temporary Internet Files and History Settings.
Anything else I need to do..can someone help?

Hi
Error 2048 is usually caused by two main reasons.
One - the global security settings are not set to allow files from the desired folder to be accessed. Check that you have added the source folder(s) for your data to the list "allows trust files in this location" under Adobe's online settings manager.
Two - you're trying to access a file on a domain that is different from the one you're running the swf file on. For this you need a crossdomain file added to the root folder of the server you're trying to access.
So your crossdomain.xml should look like this
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-http-request-headers-from domain="" headers="" secure="false" />
<allow-access-from domain="*" secure="false" />
</cross-domain-policy>
For more information, search other posts on this topic or please check out the Adobe website.
Andy
Xcelsius QA

Saved VI file size changes when data is visible on a graph but not the default value

If a VI is saved when data is visible on a graph, the file size is larger; even though the default is set to be a blank graph. I have tested this in LabVIEW 8.6 and 2009. If you load the larger file, the graph is blank as expected. If this behavior is by design, it appears odd to me.
To duplicate the issue:
Create a blank VI.
Add a Sine Waveform VI and set the number of samples to 1,000,000.
Add a Waveform Graph VI that spans the entire monitor and connect it to the output of the Sine Waveform VI.
Save the VI and note the file size.
Run the VI.
Save the VI and compare the size to the original size.
The VI file size is larger.
In the Waveform Graph, select “Reinitialize to default value.
The VI file size returns to It’s original size.

Your obeservation is correct, and expected behavior.
This behavior is useful when you have inputs that you would like to set as defaults for the user.
Obviously, if there is a value to be saved, it will require some memory to store the value.
If the input is left empty by default, that memory is made available again.
It may not be easy to think of a good use for this for a graph, but think about for numeric or string controls.
What if the user isnt sure how they should input a certain parameter or value?
You could store a default value so they could see how they should input their value.
Message Edited by Cory K on 09-15-2009 11:12 AM
Cory K

Data In R/3 is present but not in BW

Similar Messages

Maybe you are looking for