Data is not showing when condition is applied

Hi All,
I have a small query. Am trying to use a if condition to achive the following:
If the Exchange rate is 1, then I need to concatinate the revenue field with $.
And if it is not, then concatinate it with #. Exchange rate is another column in the same group.
I tried using the following:
<?xdofx:if Petrofac-PTSExchangeRate=1 then concat('$',Revenue)
else concat('#',Revenue) end if?>
But it is not showing me any result in the revenue column.
Any Ideas?
Thanks in advance,
Imtiaz.

Use xdoxslt functions instead.
<?xdoxslt:ifelse(Petrofac-PTSExchangeRate='1',concat('$',Petrofac-USDXRate),concat('#',Petrofac-USDXRate))?>

Similar Messages

When I take a picture with my iphone, the date does not show when I down load the picture. Is there a way to program this?

when I take a picture with my iphone, the date is not downloaded to my picute. Is there a way to get the date put on my pictures.

Dropbox "Camera upload" option just rename the files and looks like this.

Unplugged Ipod accidentally, caused all data to not show when reconnected

I accidentally disconnected my Ipod (knocked the cable)this wasn't done during a actual transfer. But when reconnected none of my songs,video or play list show up on the ipod, both when connected to the PC (software) or not. I've done a reset on the ipod and restarted the software (pc) run a disk error check....... HELP............. the drive shows theres 24gigs used. How do you fix/restore the file system on the ipod..... any Help would greatly be appreciated.

See: How to restore the iPod to factory settings.
After that, reload the music from iTunes.

Firefox 19.0 PDF data is not showing when we use the Preview in firefox option.

I am using FireFox 19.0 Version. In my application, I create the adobe PDF and it should shows on click on link button. On previous version it was working. but in 19.0 it is not working.
In Firefox option i am using preview in firefox option to show the PDF on browser tab.
Please suggest how can i resolve this problem.

These solutions to not help our viewers who also have this problem. All they know is the pdf is not displaying correctly and naturally assume there is something wrong with the pdf.
This function should be disabled until it reliably displays pdfs.

Date not showed when report is viewed in PDF .

Hi,
We have a text field that shows the date on which the report is running.Date is not showed when report is viewed in PDF.But in HTML we can view them . Can any one help me out?
Totally there are four pages for the report.

I have observed the PDF driver iin EPM 11.1.2.x is not up-to-date and technically the Date (Text) is there just like in HTML. However, when you increase the View (Zoom in), it eventually does show up.
I have chatted with Oracle Support, and they will not address it with a patch for now.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

Ok, the issue seem to be solved. The problem was this:
The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
And then LR is reading them and all metadata information has been set / read correctly.
So this is solved.

In IPhoto I changed movie dates after thumb nails were created in IMovie but the new dates are not showing up in IMovie. Is there someway to refresh the IPhoto event in IMovie?

Background: I'm transferring file folders from a Visa laptop via an external hard drive to my IMac. In the folders are photos and videos from different cameras. SO I first tried to import to IMovie but it would not recognize any of the files. So then I imported into IPhoto and both photos and videos were imported and I created events for each folder. When I first opened IMovie I had to wait for it to create "thumb nails". Then I could view the events in IMovie BUT the video clips are not together because they have vastly different dates and are mixed with videos from other events. I looked at the dates and said I can fix that in IPhoto which i did but those new dates are not showing up in IMovie. I think I need to somehow refresh the event data that Imovie is using but have not found how to do that in either IPhoto or IMovie.
I'm doing this on three events with about 100 photos and videos. But I have many 1000s more to do so need to know how to either fix this or delete these events, reimport, change the dates, then open again in IMovie. I'm sure that would work but I can't understand why changing the dates in IPhoto is not being reflected in IMovie.
Appreciate any tips or pointers.
OBTW this is my first question as a first time Apple owner.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

Help: Records not showing when cube is placed under the Multiporivider

Hi Experts,
I have a Cube called Bcube with char Plant,calm year/month, material and Key Figure, Pqty
When I generate a report on this Cube, everything looks fine and I see plants, year, etc in the report
There are 2 other cubes:
MCube also has char Plant,calyear/month, material and Key Figure: Pqty, Sqty, TQty, AQty
DCube also has same as BCube: with char Plant,calyear/month, material and Key Figure Pqty
When I place all three cubes under the multiprovider, the values from the BCube does not show up in reports
e.g. in a simple report such as
Row : Plant
Columns: Pqty, Sqty, TQty, AQty
In the Multiprovider, under the Indentification of Characteristics, I checked the boxes for all three cubes whenever the same charactertic in all cubes showed up for identification: e.g..
InfoProvider InfoObject
Bcube----
Plant
MCube-------Plant
DCube -
Plant
and same for. e.g. 0Calyear
and same for Key Figures, e.g. I checked all 3 boxes for PQty which exists in each of the cubes
1. Why is my data for BCube not showing when reporting against the multiprovider?
2. what does it mean by checking the 3 boxes for Plant? and checking the 3 boxes for 0Calyear.
Thanks

Hi,
regarding your questions:
1. When I run listcube against the multiprovider, I only went to the output list to select the fields I needed in the output; then entered the particular cube e.g. BCube in the infoprovider field. That was it (NO other selection) and I got the described results I explained earlier. If you have a specific test for me to try, please let me know.
2. Please find the settings in both characteristics and key figures for all cubes in the MULTIPROVIDER maintenance screen:
Characteristic Assighment:
0calyear -- 3 boxes checked for BCube, DCube & MCube
Plant -- 3 boxes checked for BCube, DCube & MCube
0Material-- 3 boxes checked for BCube, DCube & MCube
Key Figure selection
PQty-- 3 boxes checked for BCube, DCube & MCube
Sqty --checked for DCube, this key fig is ONLY in DCube
TQty--checked for DCube, this key fig is ONLY in DCube
AQty--checked for DCube, this key fig is ONLY in DCube
I hope this helps you to guide me.
Or, were you referring to mappings in the transformations?
Thanks

Data is not showing up in report on ODS

Hi All,
we have requirment like below
we have an ODS no update rules and nothing with 5 fields . with bex reporting flag checked..
we have function module to fill the data for these 5 fileds in ODS active data table .
So data is there only in active data table that table was filling by using function module.
so i need report that data .when i created and run the report data its not showing up.
Please let me know whats the issues is and how to handle.
I appreciate your help
Regards,
Sirisha

In this case you need to use Write-Optimized DSO or if you are in earlier version, then you need to use Transactional ODSinstead of basic DSO.
thanks.
Wond

BizTalk BAM Data is not showing

In BizTalk 2010, BAM Data is showing correctly.
But in BizTalk 2013, BAM Data is not showing correctly while I am applying the same procedure for both.
Event Log shows not any error.
What I have to check for getting BAM data in 2013 ?
Which configurations should I check ?
Any kind of help would be appreciated.
Prakash

Prakash,
There are two parts to it:
Deploying the BAM definitions, which would create the BAM activities and its related DB artifacts.
Deploying the Tracking profile. This step hooks you port/Orchestration/messages to the db artifacts created in step-1.
If you see the BAM tables and its related DB artifacts means BAM definitions has been deployed.
If event log is clean, no data in
TDDS_FailedTrackingData, no data in AllInstances view , you have checked the above suggestions like TDDS means, then it could be the second step which is deploying the tracking
profiles may not have happened properly.
Check the following article for help:
Deploying and Undeploying Tracking Profiles
How to Deploy Tracking Profiles with the Tracking Profiles Management Utility
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them. When I do in iPhoto an exclamation surrounded by a triangle appears. Though I can see the picture in the small tiles below it will not expand.

Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them. When I do in iPhoto an exclamation surrounded by a triangle appears. Though I can see the picture in the small tiles below it will not expand. I also cannot attach any of these pics into an e-mail or into any other file. I have already went through all 3 Repair options and when that did not solve it went through a complete Rebuild. Any Help?! Any Suggestions on how to fix this?! I have spent almost 2 days now going through all of the published help.
I have backups going back 6 months - I have not had the real need to check every album before - but - all of my backups also have this same problem.

The triangle with the ! indicates that the connection between the thumbnail and the orginal is missing - this can be caused by many things including database corruption and user action emoving the originals photos on urpose or by accident
If the database is corrupted then rebuilding is the solution - backup and depress the option and command keys, launch iPhoto and rebuild your database -- if the iPhoto rebuild does not cure the problem then download iPhoto Library manager and use its rebuild command which creates a totally new library leaving the existing one untouched
If you have deleted the photos then you need to start over with a new library and import the photos you have not deleted into it
You can select one of the problem photos and use the reveal original in finder commander (file menu) to see if the original is there - if it is a finder window will open showing it
LN

My external hard drive does not show when I am trying to open a document in Office Org??

My external hard drive does not show when I am trying to open a document in Office Org?? When looking in the about IMAC system support it shows as being connected. Any ideas??

Does the drive show up under 'Devices' in Finder?

Preview icon not showing when in thumbnail. (Sketchu

Hello,
I recently updated my MBP to Yosemite and installed sketchup on it.
The preview icon of my sketchup files are not showing when in thumbnail. But as i increase the size of the icon from thumbnail in viewoption i.e from 64px x 64px to 124px x 124px it shows. So my icon is shown as blank without any app logo. Also when i change my view from thumbnail to coverflow or something it shows. Otherthan thumbnail everything works.
So where is the error in it?
Please help...
Thanks
Amar

Try the standard fixes:
- Rest. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. - Restore from backup
- Restore to factory defaults/new iPod.

Battery icon dose not showing when i plug in to usb or power

battery icon dose not showing when i plug in to usb or power? and not charging when phone is on

I would try another cable or try the cable in another ios device
to verify if the cable was broken or your iphones connector is

Need to send my back up email a reset security questions email but the option does not show when I click on password and security

Need to send my back up email a reset security questions email but the option does not show when I click on password and security

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(97456)

Data is not showing when condition is applied

Similar Messages

Maybe you are looking for