Data Load from ECC6 in GC or LC

Hi Friends,
Have a small query. When i extract data from ECC6. Should i take the data in GC (Group currency) or in LC (Local Currency).
If i do the extract in local currency how does the system handle the currency conversion from Local currency to Group currency. What is the normal procedure.
What is the use of taking TC (Transaction currency) as i understand, the system shall convert the transaction currency into local currency in ECC6 so why do i need TC in BCS.
Shall be thankful if you could reply ASAP.
Cheers
Parmanand

Hi
Hey it will affect; wont it because when i take the value in TC the value shall be different whereas when i take it in group currency it shall be different. For eg My group currency is EUR and my local currency is GBP. When the system posts a document in ECC6 for e.g. £100 then the group currency entry shall be 120 Euros (Considering a currency conversion rate of 1.2 between GBP to EURO). In such a case how can i take LC = GC, will it not be wrong.
It shall be correct where the LC and GC are the same currency. for eg if my transaction in LC is in EUR then the GC amount shall remain the same as the GC is also EUR.
Please guide.
Cheers
Parmanand.

Similar Messages

Data load from ECC6 Unicode to BI7 MDMP

Hello Contributors,
We are upgrading R3 system to ECC6 Unicode but BI7 is still MDMP system. I'm testing data load and there are some errors related with unicode conversion.
ECC has multiple langusges like English, Korean, Chinese etc...
BI7 MDMP has English and Korean.
Error1 : Korean characters are broken in 0CUSTOMER_TEXT.
   As you know customer name doesn't have language code in R3 and Korean text are being used for Korean customers. After loading the data, English characters are okay but Korean characters are broken and displayed as #
Error2 : Values of fields are merged each other if there is Korean characters in 0CUST_SALES_ATTR.
   We have Korean characters in some of attributes of 0CUST_SALES. So if a record has Korean characters in one of the field then the following fields are merged each other. But if there is no Korean characters then it is loaded correctly.
For an example;
Values of R3 extractor
    Cust#      Name               Field1          Field2     Field3
    1234     Korean Text               ABCD          EFGH     JKLM
    3456     English Text               OPQR          STUV     WXYZ
Values of PSA table after loading
    Cust#      Name               Field1          Field2     Field3
    1234     Korean Text AB     CDEF          GHJK     LM
    3456     English Text              OPQR          STUV     WXYZ
(*if there are Korean characters then the following fields are divided and a part is updated in to the previous field)
Please help me if you have any ideas to resolve this issues.
Best Regards
HD Sung.

Convert your BI system to Unicode. MDMP is not supported in this scenario, as you have found.

Re-load from ECC6

Weu2019re on BI7, but using the old BW 3.x Dataflow, no new BI7 Dataflow.
Because of the data quality problem, I would like to delete all the Request from the existing data model (i.e InfoCube, Aggregate, ODS, Master Data, PSA) and perform the full load for all this again.
1.) For InfoCube, I will right-click the InfoCube ->Manage ->Request tab, then select the Request and click on the Delete button manually.
2) For Aggregate, in InfoCube ->Roll Up tab, click on Aggregates button, then open the InfoCube, then click on Deactivate button. (after the re-load, I need to click on Activate button again)
3) For ODS, I will right-click the ODS -> Manage ->Request tab, then select the Request and click on the Delete button manually.
4) PSA, I will right-click on each Datasource ->Manage, then select the Request and click on the Delete button manually.
Questions:
A) What about the ODS Change Log table? How can I delete them?
B) What I understand is Master Data will always be overwritten. So there is no need for me to delete the data for each Master Data correct? Because when I re-load all the data from ECC6, all the data in the Master Data will be overwritten, correct?
C) Is there any other thing that I need to take care in order for me to re-load all the data again from ECC6 into BW?

Ganesh,
Exactly how we can delete the Change Log via SE16?
What happen if we didn't delete the Change Log? Will it cause duplicate record later?
1.) For InfoCube, I will right-click the InfoCube ->Manage ->Request tab, then select the Request and click on the Delete button manually.
Is there a way to delete all the Request in the InfoCube in background instead of one by one manually?
Also, what happen if the Request in the InfoCube has been compressed, and it also have Aggregate? How to delete them?

Data loading from DSO to Cube

Hi,
I have a question,
In book TBW10 i read about the data load from DSO to InfoCube
" We feed the change log data to the InfoCube, 10, -10, and 30 add to the correct 30 value"
My question is cube already have 10 value, if we are sending 10, -10 and 30 Values(delta), the total should be 40 instead of 30.
Please some one explaine me.
Thanks

No, it will not be 40.
It ll be 30 only.
Since cube already has 10, so before image ll nullify it by sending -10 and then the correct value in after immage ll be added as 30.
so it ll be like this 10-10+30 = 30.
Thank-You.
Regards,
Vinod

Error is data loading from 3rd party source system with DBCONNECT

Hi,
We have just finished an upgrade of SAP BW 3.10 to SAP NW 7.0 EHP1.
After the upgrade, we are facing a problem with data loads from a third party Oracle source system using DBConnect.
The connection is working OK and we can see the tables in the source system. But we cannot load the data.
The error in the monitor is as follows:
'Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.'
But, unfortunately, the error message has no further information.
If we look at the job log in sm37, the job finished with the following log -
27.10.2009 12:14:19 Job started                                                                                00           516          S
27.10.2009 12:14:19 Step 001 started (program RSBATCH1, variant &0000000000119, user ID RXSAHA)                    00           550          S
27.10.2009 12:14:23 Start InfoPackage ZPAK_4FMNJ2ZHNNXC6HT3A2TYAAFXG                                              RSM1          797          S
27.10.2009 12:14:24 Element NOAUTHORITYCHECK is not available in the container                                     OL           356          S
27.10.2009 12:14:24 InfoPackage ZPAK_4FMNJ2ZHNNXC6HT3A2TYAAFXG created request REQU_4FMXSQ6TLSK5CYLXPBOGKF31G     RSM1          796          S
27.10.2009 12:14:24 Job finished                                                                                00           517          S
In a BW 3.10 system, there is no message related to element NOAUTHORITYCHECK. So, I am wondering if this is something new in NW 7.0.
Thanks in advance,
Rajib

There will be three things to get the errors like this
1.RFC CONNECTION FAILED
2.CHECK THE SOURCE SYSTEM
3.CHECK IT OUT WITH Oracle Consultants WEATHER THEY ARE FILLING UP THE LOADS.TELL THEM TO STOP
4.CHECK I DOC PROCESSING
5.FINALLY MEMORY ISSUES.
6.CATCH THE DATA SOURCE FIRST CHANGE IT AND THEN ACTIVATE AND RUN THE LOAD
7.LAST IS MEMORY ISSUE.
and also Check the RFC connection in SM59 If it is ok then
check the SAP note : 692195 for authorization
Santosh

How to find the data loaded from r/3 to bw

hi
how to find the data loaded from r/3 to bw is correct . i am not able to find which feild in the query is connected to which feild in the r/3 . where i am geting the data from r/3 . is there any process to find which feild and table the data is comming from . plz help
thanks in advance to u all

Hi Veda ... the mapping between R/3 fields and BW InfoObjects should take place in Transfer Rules. Other transformation could take place in Update Rule.
So you could proceed this way: look at InfoProvider Data Model and see if the Query does perform any calculation (even with Virtual keyfigures / chars). Than go back to Update Rules and search for other calculation / transformation. At least there are Tranfer Rule and eventually DataSource / Extraction Enhancements.
As you can easily get there are many points where you have to look for ... it's a quite complex work but very usefull.
Once you will have identified all mappings / transfromation see if BW data matchs R/3 (considering calculations ...)
Good job
GFV

How we can automate the data loading from BI-BPC

Dear Guru's
Thanks for watching this thread,my question is
How we can load the data from BI7.0 to BPC.My environment is SAP-BI 7.0 and BPC is 7.5 MS version and 2008SQL.
How we can automate the data loading from BI- BPC Ms version.Is manual flat file load is mandatory in ms version.
Thanks in Advance,
Srinivasan.

Here are some options
1) Use standars packages and schedule them :
A) Openhub masterdata file into a flat file/ BPC App server and Schedule the package - Import Master Data from a Data File and other relevent packages.
2 ) Using Custom Tasks in Custom Packages ( SSIS)
Procedure
From the Microsoft SQL Server Business Intelligence Developer Studio, open the Microsoft SSIS folder.
Create a new package, or select an existing package to modify.
Choose Task Register Custom Task .
In the Task Location field, browse for the target .dll file.
Note
By default, the .dll files are stored in BPC/Websrvr/bin.
End of the note.
Enter a task description, select an appropriate icon, then click OK.
Drag the icon to the designer window. Enter data as required.
Save the package.

Number of parallel process definition during data load from R/3 to BI

Dear Friends,
We are using Bi7.00. We have a requirement in which i should increase the number of parallel process during data load from R/3 to BI. I want to modify this for a particular data source and check.Can experts provide helpful answers for the following question.
1) When load is taking place or have taken place, where can we see how many parallel process that particular load has taken.
2) Where should i change the setting for the number of parallel process for data load (from R/3 to BI) and not within BI.
3) How system works and what will be net result of increasing or decreasing the number of parallel process.
Expecting Experts help.
Regards,
M.M

Dear Des Gallagher,
Thank you very much for the useful information provided. The following was my observation.
From the posts in this forum, i was given to understand that the setting for specific data source can be done in the infopackage and DTP level, i carried out the same and found that there is no change in the load, i.e., system by default takes only one parallel process even though i maintained 6.
Can you kindly explain about the above mentioned point. i.e.,
1) Even though the value is maintained in the infopackage level , will system consider it or not. -> if not then from which transaction system is able to derive the 1 parallel process.
Actually we wanted to increase the package size but we failed because i could not understand what values have to be maintained -> can you explain in detail
Can you calrify my doubt and provide solution?
Regards,
M.M

Data load from R3 is slow and gives rfc connection error

Hi all, is there any debug capabilties available on BI 7.0 when it comes to debug data load from R3 using rfc connection ( aleremote and bwiremote users )
any ideas where can I look for solution.
thanks.

Hi,
Check the connection between the R/3 and BW.
or It may be the network problem contact system admin or basis people.
thanks,
dru

Data loading from flat file to cube using bw3.5

Hi Experts,
                   Kindly give me the detailed steps with screens about Data loading from flat file to cube using bw3.5
       ...............Please

Hi ,
Procedure
You are in the Data Warehousing Workbench in the DataSource tree.
       1.      Select the application components in which you want to create the DataSource and choose Create DataSource.
       2.      On the next screen, enter a technical name for the DataSource, select the type of DataSource and choose Copy.
The DataSource maintenance screen appears.
       3.      Go to the General tab page.
                            a.      Enter descriptions for the DataSource (short, medium, long).
                            b.      As required, specify whether the DataSource builds an initial non-cumulative and can return duplicate data records within a request.
                            c.      Specify whether you want to generate the PSA for the DataSource in the character format. If the PSA is not typed it is not generated in a typed structure but is generated with character-like fields of type CHAR only.
Use this option if conversion during loading causes problems, for example, because there is no appropriate conversion routine, or if the source cannot guarantee that data is loaded with the correct data type.
In this case, after you have activated the DataSource you can load data into the PSA and correct it there.
       4.      Go to the Extraction tab page.
                            a.      Define the delta process for the DataSource.
                            b.      Specify whether you want the DataSource to support direct access to data.
                            c.      Real-time data acquisition is not supported for data transfer from files.
                            d.      Select the adapter for the data transfer. You can load text files or binary files from your local work station or from the application server.
Text-type files only contain characters that can be displayed and read as text. CSV and ASCII files are examples of text files. For CSV files you have to specify a character that separates the individual field values. In BI, you have to specify this separator character and an escape character which specifies this character as a component of the value if required. After specifying these characters, you have to use them in the file. ASCII files contain data in a specified length. The defined field length in the file must be the same as the assigned field in BI.
Binary files contain data in the form of Bytes. A file of this type can contain any type of Byte value, including Bytes that cannot be displayed or read as text. In this case, the field values in the file have to be the same as the internal format of the assigned field in BI.
Choose Properties if you want to display the general adapter properties.
                            e.      Select the path to the file that you want to load or enter the name of the file directly, for example C:/Daten/US/Kosten97.csv.
You can also create a routine that determines the name of your file. If you do not create a routine to determine the name of the file, the system reads the file name directly from the File Name field.
                              f.      Depending on the adapter and the file to be loaded, make further settings.
■       For binary files:
Specify the character record settings for the data that you want to transfer.
■       Text-type files:
Specify how many rows in your file are header rows and can therefore be ignored when the data is transferred.
Specify the character record settings for the data that you want to transfer.
For ASCII files:
If you are loading data from an ASCII file, the data is requested with a fixed data record length.
For CSV files:
If you are loading data from an Excel CSV file, specify the data separator and the escape character.
Specify the separator that your file uses to divide the fields in the Data Separator field.
If the data separator character is a part of the value, the file indicates this by enclosing the value in particular start and end characters. Enter these start and end characters in the Escape Charactersfield.
You chose the; character as the data separator. However, your file contains the value 12;45 for a field. If you set u201C as the escape character, the value in the file must be u201C12;45u201D so that 12;45 is loaded into BI. The complete value that you want to transfer has to be enclosed by the escape characters.
If the escape characters do not enclose the value but are used within the value, the system interprets the escape characters as a normal part of the value. If you have specified u201C as the escape character, the value 12u201D45 is transferred as 12u201D45 and 12u201D45u201D is transferred as 12u201D45u201D.
In a text editor (for example, Notepad) check the data separator and the escape character currently being used in the file. These depend on the country version of the file you used.
Note that if you do not specify an escape character, the space character is interpreted as the escape character. We recommend that you use a different character as the escape character.
If you select the Hex indicator, you can specify the data separator and the escape character in hexadecimal format. When you enter a character for the data separator and the escape character, these are displayed as hexadecimal code after the entries have been checked. A two character entry for a data separator or an escape sign is always interpreted as a hexadecimal entry.
                            g.      Make the settings for the number format (thousand separator and character used to represent a decimal point), as required.
                            h.      Make the settings for currency conversion, as required.
                              i.      Make any further settings that are dependent on your selection, as required.
       5.      Go to the Proposal tab page.
This tab page is only relevant for CSV files. For files in different formats, define the field list on the Fields tab page.
Here you create a proposal for the field list of the DataSource based on the sample data from your CSV file.
                            a.      Specify the number of data records that you want to load and choose Upload Sample Data.
The data is displayed in the upper area of the tab page in the format of your file.
The system displays the proposal for the field list in the lower area of the tab page.
                            b.      In the table of proposed fields, use Copy to Field List to select the fields you want to copy to the field list of the DataSource. All fields are selected by default.
       6.      Go to the Fields tab page.
Here you edit the fields that you transferred to the field list of the DataSource from the Proposal tab page. If you did not transfer the field list from a proposal, you can define the fields of the DataSource here.
                            a.      To define a field, choose Insert Row and specify a field name.
                            b.      Under Transfer, specify the decision-relevant DataSource fields that you want to be available for extraction and transferred to BI.
                            c.      Instead of generating a proposal for the field list, you can enter InfoObjects to define the fields of the DataSource. Under Template InfoObject, specify InfoObjects for the fields in BI. This allows you to transfer the technical properties of the InfoObjects into the DataSource field.
Entering InfoObjects here does not equate to assigning them to DataSource fields. Assignments are made in the transformation. When you define the transformation, the system proposes the InfoObjects you entered here as InfoObjects that you might want to assign to a field.
                            d.      Change the data type of the field if required.
                            e.      Specify the key fields of the DataSource.
These fields are generated as a secondary index in the PSA. This is important in ensuring good performance for data transfer process selections, in particular with semantic grouping.
                              f.      Specify whether lowercase is supported.
                            g.      Specify whether the source provides the data in the internal or external format.
                            h.      If you choose the external format, ensure that the output length of the field (external length) is correct. Change the entries, as required.
                              i.      If required, specify a conversion routine that converts data from an external format into an internal format.
                              j.      Select the fields that you want to be able to set selection criteria for when scheduling a data request using an InfoPackage. Data for this type of field is transferred in accordance with the selection criteria specified in the InfoPackage.
                            k.      Choose the selection options (such as EQ, BT) that you want to be available for selection in the InfoPackage.
                              l.      Under Field Type, specify whether the data to be selected is language-dependent or time-dependent, as required.
       7.      Check, save and activate the DataSource.
       8.      Go to the Preview tab page.
If you select Read Preview Data, the number of data records you specified in your field selection is displayed in a preview.
This function allows you to check whether the data formats and data are correct.
For More Info: http://help.sap.com/saphelp_nw70/helpdata/EN/43/01ed2fe3811a77e10000000a422035/content.htm

Summing up key figure in Cube - data load from ODS

Hello Gurus,
I am doing a data load from ODS to cube.
The records in ODS are at line-item level, and all needs to be summed up at header level. There is only one key-figure. ODS has header and line-item fields.
I am loading only header field data ( and not the item-field data) from ODS to Cube.
I am expecting only-one record in cube ( for all the item-level records) with all the key-figures summed up. But couldn't see that.
Can anyone please explain how to achieve it.
I promise to reward points.
=====
Example to elaborate my point.
In ODS
Header-field item-field   quantity
123                301          10
123                302           20
123                303           30
Expected record in Cube
Header-field       Quantity
   123                    60
====================
Regards,
Pramod.

Hello Oscar and Paolo.
Thanks for the reply. I am using BW 7.0
Paolo suggested:
>>If you don't add item number to cube and put quantity as adition in update rules >>from ODS to cube it works.
I did that still I get 3 records in cube.
Oscar Suggested:
>>What kind of aggregate do you have for your key figure in update rules (update >>or no change)?
It is "summation". And it cannot be changed. (Or at least I do not know how to change it.)
There are other dimensions in the cube - which corresponds to the field(s) in ODS.
But, I just mentioned these two (i.e. header and item-level) for simplicity.
Can you please help?
Thank you.
Pramod.

BPC:: Master data load from BI Process chain

Hi,
we are trying to automatize the master data load from BI.
Now we are using a package with:
PROMPT(INFILES,,"Import file:",)
PROMPT(TRANSFORMATION,%TRANSFORMATION%,"Transformation file:",,,Import.xls)
PROMPT(DIMENSIONNAME,%DIMNAME%,"Dimension name:",,,%DIMS%)
PROMPT(RADIOBUTTON,%WRITEMODE%,"Write Mode",2,{"Overwirte","Update"},{"1","2"})
INFO(%TEMPNO1%,%INCREASENO%)
INFO(%TEMPNO2%,%INCREASENO%)
TASK(/CPMB/MASTER_CONVERT,OUTPUTNO,%TEMPNO1%)
TASK(/CPMB/MASTER_CONVERT,FORMULA_FILE_NO,%TEMPNO2%)
TASK(/CPMB/MASTER_CONVERT,TRANSFORMATIONFILEPATH,%TRANSFORMATION%)
TASK(/CPMB/MASTER_CONVERT,SUSER,%USER%)
TASK(/CPMB/MASTER_CONVERT,SAPPSET,%APPSET%)
TASK(/CPMB/MASTER_CONVERT,SAPP,%APP%)
TASK(/CPMB/MASTER_CONVERT,FILE,%FILE%)
TASK(/CPMB/MASTER_CONVERT,DIMNAME,%DIMNAME%)
TASK(/CPMB/MASTER_LOAD,INPUTNO,%TEMPNO1%)
TASK(/CPMB/MASTER_LOAD,FORMULA_FILE_NO,%TEMPNO2%)
TASK(/CPMB/MASTER_LOAD,DIMNAME,%DIMNAME%)
TASK(/CPMB/MASTER_LOAD,WRITEMODE,%WRITEMODE%)
But we need to include these tasks into a BI process chain.
How can we add the INFO statement into a process chain?
And how can we declare the variables?
Regards,
EZ.

Hi,
i have followed your recomendation, but when i try to use the process /CPMB/MASTER_CONVERT, with the parameter TRANSFORMATIONFILEPATH and the root of the transformation file as value, i have a new problem. The value only have 60 char, and my root is longer:
\ROOT\WEBFOLDERS\APPXX\PLANNING\DATAMANAGER\TRANSFORMATIONFILES\trans.xls
How can we put this root???
Regards,
EZ.

Automated data load from APO to SEM transactional cube

Hi ,
We have BW-SEM system integrated with APO system.
I could see automated data loads from APO to SEM transactional cube ..
Infopackage name as "Request loaded using the APO interface without monitor log" ..
I don't see any infopackage by this name in both the systems ( APO & SEM )..
I am not sure how it configured ..
Appreciate any inputs on how its happens .....
Thanks in advance

Hi,
As I mentioned the starting point will be the tcode BPS0. There will be 2 planning areas created (if I am correct) one for SEM cube and the other for APO cube. The better way to find it will be goto tcode se16 and enter UPC_BW_AREA and key in the cube names in the cube field. this will give you the planning area names now look for a multiplanning area which has the 2 areas included in them (this is available in table UPC_AREAM).
then goto BPS0 and you will have to find which function is being used to post the data.
thanks

Steps for Master data upload from ECC6.0 to BI7.0

Hi experts,
I need to load material master and customer master data from ECC6.0 to BI7.0 and i could not see the steps to do so in sdn.
Can anyone please give me the steps from the beging till end usign Business content 0material_attr/text/Hier .
I Will assign deserving points to all the answers.
Thanks in advance.

Hi,
Steps:
1. Go to RSA5 in ECC6 to Install Business Content D.S.
2.If you want do any change then Go to RSA6 in ECC6
3. Replicate DS in BW .
4. Create Transformation (to connect DS to MD).
5 Create Info package ( to load from S/S to PSA ).
6. Create DTP ( to load from PSA to MD Objects ).
Please let me know if i am missing any steps.
Ali.

Data Load from a DSO to a Cube

Hello,
I am facing a problem
Case:
There is a DSO with following Char/Key Figure:
Characteristics     ( Value-1 )     ( Value-2 )     ( Value-3 )
A(Key)          ( A1 )     ( A2 )     ( A3 )
B(Key)          ( B1 )     ( B2 )     ( B3 )
C          ( C1 )     ( C1 )     ( C1 )
D          ( D1 )     ( D1 )     ( D1 )
E          ( E1 )     ( E1 )     ( E1 )
F          ( F1 )     ( F1 )     ( F1 )
KF1(Key Figure)     ( 10 )     ( 20 )     ( 30 )
I got below data from the DSO to a Cube(structure is below with data) details are below:
Dimention          ( Values )
C          ( C1 )
D          ( D1 )
E          ( E1 )
F          ( F1 )
KF1(Key Figure)     ( 50 )
My Question is why i am not getting KF1 value as 60.
When i tried with including Key Fields of the DSO, i got all the records in the Cubes.
Where i am mistaking?
Can some one correct me please?
Thanks.
Avinash.

Below are the basic steps which we follow in any BI 2004S system:
1)Create datasource. Here u can set/check the Soucre System fields.
2)Create Transformation for that datasource. (no more update rules/transfer rules)
2.1) While creating transformation for DS it will ask you for data target name, so just assign where u want to update ur data.
DataSource -> Transformation -> Data Target
Now if you want to load data into data target from Source System Datasource:
1) Create infopackage for that data source. If you are creating infopackage for new datasources, it will only allow you update upto PSA, all other options u can see as disabled.
2)Now Create DTP (Data Transfer Process) for that data source.
3) NOw schdule the Infopackage, once the data is loaded to PSA, you can execute your DTP which will load data to data target.
If you are loading data from one one data target to other, no need to use PSA, you can directly execute DTP in that case.
Data Source -> Transformation (IP/DTP) -> Data Target1 -> DTP ->Data Target 2
Use the below link for detailed example:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fc61e12d-0a01-0010-2883-e2fc63ef729b
Infosources are no more mandatory with BI 7.0, below is the link to scenarios where we use infosources:
http://help.sap.com/saphelp_nw04s/helpdata/en/44/0243dd8ae1603ae10000000a1553f6/content.htm
Full or delta depends on your requirement...
chk the below thread to know better
difference between the various loads
hope it helps
Message was edited by:
        sriram viswanathan

Data Load from ECC6 in GC or LC

Similar Messages

Maybe you are looking for