Data Migration Service Manager 2010 and 2012 database to SCSM 2012 R2

I have search the web far and wide for a good answer to this question. We are consolidating two separate instances of Service Manager (one is 2010 and the other is 2012). We will being moving to a new Service Manager 2012 R2 instance. We
don't want to upgrade the older versions SCSM (i.e. 2010 and 2012) of the software installation do to various reasons.
We want to export all open ticket from Service Manager 2010 and 2012, and import then into the new SCSM 2012 R2 database. The best advice I can find is:
Export the data into a CSV file and import into SCSM 2012 R2 DB through a connector. I think there maybe too many data dependencies to do that efficiently.
I didn't find this, and I am hoping not to use this option which would be upgrade the two instances of SCSM 2010 and 2012 apps and DBs to 2012 R2, then some how transfer the data to the new SCSM 2012 R2 instance.
I am not sure any of these idea would even work, but I don't want to ask a question without trying to workout some possibilities.
Thanks,
Jay...

Hi,
You may simply duplicate your SCSM 2010 environment and upgrade it to SCSM 2012
http://technet.microsoft.com/en-us/library/hh914226.aspx
Regards
Antoine AL Ibry

Similar Messages

Migrating Service Manager to new machines Server 2008R2 - 2012R2

Hi
Does anyone have any recommendations for migrating Service Manager from Server + SQL 2008R2 to Server + SQL.
Currently have a 2 machine deployement (SCSM and a DataWarehouse server) both with SQL locally install on each host, and single management server.

Hi,
I would like to suggest you install an additional SCSM management server and uninstall the old SCSM management server.
You may refer to the article below regarding to database moving:
Moving the Service Manager and DW Databases
http://blogs.technet.com/b/servicemanager/archive/2012/04/22/moving-the-service-manager-and-dw-databases.aspx
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How can we do the data migration between Oracle Applications and SAP R/3.

Hi All,
How can we do the data migration between Oracle Applications and SAP R/3 system.What are all the possible ways to move bulk data from Oracle Apps to SAP r/3 system.
Provide any 3rd party tools which supports data migration and also pls rpovide the SAP's own data migration tools with supports the above feature.
Awaiting for best possible solution.
Thanks in advance.
Regards
Dharmaraju

the 3rd party tool is ETL , you can use ETL tool and the prepare the load files then you can use LSMW method to upload the data to SAP.

How to do data migration between single node and multi node HANA systems ?

Data migration between single node and multi node HANA systems ?
What are limitations ?
What should be the best practices ?

Data migration between single node and multi node HANA systems ?
What are limitations ?
What should be the best practices ?

Service Manager 2010 lab environment syncing with production database

I am trying to setup a lab environment for SCSM 2010 to test the upgrade to SCSM 2012. I have been following the instructions found here:
http://technet.microsoft.com/en-us/library/hh914226.aspx
I have successfully made it to step 16. However, when I open the SCSM console in the lab environment it still shows the Data Warehouse and Reporting buttons. When I create a new ticket in either the lab or production environment it shows up in both consoles,
even though the production console is connected to the production server and the lab console is connected to the lab server.
Any ideas on why the lab environment is still syncing with the production server?
Thanks

Thread of the Necro-Dancer:
Regardless, the step Katie was apparently implying (but seems to be missing from her description) is the bit where you backup the database and restore it to a separate instance. after this is done, you can then install a new management server targeting this
new instance, and then promote the new management server to the workflow server, and run the isolated database using the new management server.
i would recommend, however, that you use
the supported method of producing a upgrade lab with production data, which is very similar to the method Katie implied, includes directions covering all of these steps involved, and allows you to periodically restore production data to the lab database
with minimal overhead.
I didn't notice the date before now. I just look at the latest unanswered posts, so not sure how I got into this one. But technet has been acting weird lately. I get an internal server error far too often.
http://codebeaver.blogspot.dk/

Data migration ALE or idocs and bapis

hi ,
thank you guys for the support.
i am into a data migration project.
i need the initial setup for the idocs and bapis.
i dont know anything about these so can u send me the process for the setup and the data migration process too with idocs and bapis.
i didnt understand when they asked me if we can data migrate with a ALE, is that the same as using idocs and bapis or is it a different approach.
u can send me at any inofrmation connected to my eamil addr.
i would really appreciate that.
thank you.

Hi,
Outbound:
Step 1. Application document is created when transaction is saved.
2. Message control is invoked.
3. Messages are processed by system.
4. Messages are Edited (if desired).
5. Output (ALE / EDI) is checked
6. Validate against Message control record from Partner Profile
7. Application Document is saved.
8. Entry NAST table is created for every selected output program
along with Medium & Timing.
9. Check for Process Immediately .
If (yes)
Determine Processing Program from TNAPR Table.
ELSE
Execute RSNASTED Program.
10. Read Partner Profile to determine Process Code.
11. Process Code points to the Function Module & Invoked.
12. IDoc is generated.
13. Check for ALE Request.
if (Yes)
Perform Filters, Conversions, Version Changes etc.
Else.
IDoc is stored in DATABASE.
INBOUND:
Step 1. EDI Subsystem creates an IDoc file from EDI Messages
2. Subsystem calls Functional Module EDI_DATA_INCOMING from startRFC program.
3. Data in Control Record is validate against the Partner Profile.
4. IDoc is generated in Database and syntax check is carried out.
5. IDoc file is deleted once file read.
6. Event PROCESSSTATE REACHED is triggered in Idoc Object Workflow.
7. Check for Process Immediately.
If NO
Execute RBDAPP01 Program
Else
Read Process Code from Partner Profile
Process Code Points to Function Module
Application Document Posted.
further help:
check url
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/ale/configuration.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapdevelopment.co.uk/training
And also u can get lots of inof from the below link.
http://www.sapgenie.com/ale/why_ale.htm
Just follow the procedure
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type, for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type, for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type. The instance to be cancelled remains in the database and an additional instance is created and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst! ance and the BAPI and Remove<subobject> removes a subobject from an object instance. These BAPIs are instance methods.
BAPI-step by step
http://www.sapgenie.com/abap/bapi/example.htm
just refer to the link below
http://www.sapmaterial.com/?gclid=CN322K28t4sCFQ-WbgodSGbK2g
list of all bapis
http://www.planetsap.com/LIST_ALL_BAPIs.htm
for BAPI's
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
http://www.planetsap.com/Bapi_main_page.htm
http://www.topxml.com/sap/sap_idoc_xml.asp
http://www.sapdevelopment.co.uk/
http://www.sapdevelopment.co.uk/java/jco/bapi_jco.pdf
Also refer to the following links..
www.sap-img.com/bapi.htm
www.sap-img.com/abap/bapi-conventions.htm
www.planetsap.com/Bapi_main_page.htm
www.sapgenie.com/abap/bapi/index.htm
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
Example Code
U need to give the step_nr, item_nr, cond_count and cond_type so the correct conditon will be updated. If no condition exists for the given parameters, a new condition will be created.
U can find these parameters for a particular condition type in table KONV.
*& Form saveTransactionJOCR
text
--> p1 text
<-- p2 text
FORM saveTransactionJOCR .
data: salesdocument like BAPIVBELN-VBELN,
order_header_inx like bapisdh1x,
order_header_in like bapisdh1,
return type standard table of bapiret2 with header line,
conditions_in type standard table of bapicond with header line,
conditions_inx type standard table of bapicondx with header line,
logic_switch like BAPISDLS,
step_nr like conditions_in-cond_st_no,
item_nr like conditions_in-itm_number,
cond_count like conditions_in-cond_count,
cond_type like conditions_in-cond_type.
salesdocument = wa_order_information-VBELN.
LOGIC_SWITCH-COND_HANDL = 'X'.
order_header_inx-updateflag = 'U'.
conditions
clear conditions_in[].
clear conditions_inx[].
clear: step_nr,
item_nr,
cond_count,
cond_type.
step_nr = '710'.
item_nr = '000000'.
cond_count = '01'.
cond_type = 'ZCP2'.
CONDITIONS_IN-ITM_NUMBER = item_nr.
conditions_in-cond_st_no = step_nr.
CONDITIONS_IN-COND_COUNT = cond_count.
CONDITIONS_IN-COND_TYPE = cond_type.
CONDITIONS_IN-COND_VALUE = 666.
CONDITIONS_IN-CURRENCY = 'EUR'.
append conditions_in.
CONDITIONS_INX-ITM_NUMBER = item_nr.
conditions_inx-cond_st_no = step_nr.
CONDITIONS_INX-COND_COUNT = cond_count.
CONDITIONS_INX-COND_TYPE = cond_type.
CONDITIONS_INX-UPDATEFLAG = 'U'.
CONDITIONS_INX-COND_VALUE = 'X'.
CONDITIONS_INX-CURRENCY = 'X'.
append conditions_inx.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
SALESDOCUMENT = salesdocument
ORDER_HEADER_IN = order_header_in
ORDER_HEADER_INX = order_header_inx
LOGIC_SWITCH = logic_switch
TABLES
RETURN = return
CONDITIONS_IN = conditions_in
CONDITIONS_INX = conditions_inx
if return-type ne 'E'.
commit work and wait.
endif.
ENDFORM. " saveTransactionJOCR
Bdc to Bapi
The steps to be followed are :
1. Find out the relevant BAPI (BAPI_SALESORDER_CHANGE for VA02).
for VA01 use BAPI_SALESORDER_CREATEFROMDAT2
2. Create a Z program and call the BAPi (same as a Funtion module call).
2. Now, if you see this BAPi, it has
-> Importing structures.
eg: SALESDOCUMENT: this will take the Sales order header data as input.
-> Tables parameters:
eg: ORDER_ITEM_IN: this will take the line item data as input.
Note :
Only specify fields that should be changed
Select these fields by entering an X in the checkboxes
Enter a U in the UPDATEFLAG field
Always specify key fields when changing the data, including in the checkboxes
The configuration is an exception here. If this needs to be changed, you need to complete it again fully.
Maintain quantities and dates in the schedule line data
Possible UPDATEFLAGS:
U = change
D = delete
I = add
Example
1. Delete the whole order
2. Delete order items
3. Change the order
4. Change the configuration
Notes
1. Minimum entry:
You must enter the order number in the SALESDOCUMENT structure.
You must always enter key fields for changes.
You must always specify the update indicator in the ORDER_HEADER_INX.
2. Commit control:
The BAPI does not run a database Commit, which means that the application must trigger the Commit so that the changes are read to the database. To do this, use the BAPI_TRANSACTION_COMMIT BAPI.
For further details... refer to the Function Module documentation for the BAPi.
Bapi to VB(Visual Basic)
Long back I had used the following flow structure to acheive the same.
Report -> SM59 RFC destination -> COM4ABAP -> VB.exe
my report uses the rfc destination to create a COM session with com4abap. com4abap calls the vb.exe and manages the flow of data between sap and vb exe.
You need to have com4abap.exe
If com4abap is installed you will find it in sapgui installatin directory , C:\Program Files\SAPpc\sapgui\RFCSDK\com4abap.
else refer OSS note 419822 for installation of com4abap
after making the settings in com4abap to point to the vb program and setting up rfc destination in sm59 to point to com4abap session , you can use the following function modules to call the vb code.
for setting up com4abap and rfc destination please refer to the documentation for com4abap.
Invoke NEW DCOM session
call function 'BEGIN_COM_SESSION'
exporting
service_dest = service_dest "(this will be a RFC destination created in SM59)
importing
worker_dest = worker_dest
exceptions
connect_to_dcom_service_failed = 1
connect_to_dcom_worker_failed = 2
others = 3.
call function 'create_com_instance' destination worker_dest
exporting
clsid = g_c_clsid
typelib = g_c_typelib
importing
instid = g_f_oid
exceptions
communication_failure = 1 message g_f_msg
system_failure = 2 message g_f_msg
invalid_instance_id = 3
others = 4.
call function 'com_invoke' destination worker_dest
exporting
%instid = g_f_oid
%method = 'UpdatePDF'
sntemp = g_v_const_filent
snsysid = sy-sysid
snflag = 'N'
tables
rssaptable = g_t_pdfdetail1
%return = g_t_pdfdetail1 "t_test
exceptions
communication_failure = 1 message g_f_msg
system_failure = 2 message g_f_msg
invalid_instance_id = 3
others = 4.
then close the com session , using
FM delete_com_instance
FM END_COM_SESSION
Thanks and regards,
Sarada

Fetching all mails in Inbox from Exchange Web Services Managed API and storing them as a .eml files

I want to fetch all mails in the Inbox folder using EWS Managed API and store them as .eml.
I can store file once I get the file content as a byte[] will
not be difficult, as I can do:
File.WriteAllBytes("c:\\mails\\"+mail.Subject+".eml",content);
The problem will be to fetch (1) all mails with (2)
all headers (like from, to, subject) (I am keeping information of those values of from, to and
other properties somewhere else, so I need them too) and (3)byte[]
EmailMessage.MimeContent.Content. Actually I am lacking understanding of
Microsoft.Exchange.WebServices.Data.ItemView,
Microsoft.Exchange.WebServices.Data.BasePropertySet and
Microsoft.Exchange.WebServices.Data.ItemSchema
thats why I am finding it difficult.
My primary code is:
When I create PropertySet as
follows:
PropertySet properties = new PropertySet(BasePropertySet.FirstClassProperties, ItemSchema.MimeContent);
I get following exception:
The property MimeContent can't be used in FindItem requests.
I dont understand
(Q1) What these ItemSchema and BasePropertySet are
(Q2) And how we are supposed to use them
So I removed ItemSchema.MimeContent:
PropertySet properties = new PropertySet(BasePropertySet.FirstClassProperties);
I wrote simple following code to get all mails in inbox:
ItemView view = new ItemView(50);
view.PropertySet = properties;
FindItemsResults<Item> findResults;
List<EmailMessage> emails = new List<EmailMessage>();
do
findResults = service.FindItems(WellKnownFolderName.Inbox, view);
foreach (var item in findResults.Items)
emails.Add((EmailMessage)item);
Console.WriteLine("Loop");
view.Offset = 50;
while (findResults.MoreAvailable);
Above I kept page size of ItemView to
50, to retrieve no more than 50 mails at a time, and then offsetting it by 50 to get next 50 mails if there are any. However it goes in infinite loop and continuously prints Loop on
console. So I must be understanding pagesize and offset wrong.
I want to understand
(Q3) what pagesize, offset and offsetbasepoint in ItemView constructor
means
(Q4) how they behave and
(Q5) how to use them to retrieve all mails in the inbox
I didnt found any article online nicely explaining these but just giving code samples. Will appreciate question-wise explanation despite it may turn long.

1) With FindItems it will only return a subset of Item properties see
http://msdn.microsoft.com/en-us/library/bb508824(v=exchg.80).aspx for a list and explanation. To get the mime content you need to use a GetItem (or Load) I would suggest you read
http://blogs.msdn.com/b/exchangedev/archive/2010/03/16/loading-properties-for-multiple-items-with-one-call-to-exchange-web-services.aspx which also covers of paging as well.
3) offset is from the base your setting the offset to 50 each time which means your only going to get the 50 items from the offset of 50 which just creates an infinite loop. You should use
view.Offset
= +50;
to increment the Offset although it safer to use
view.Offset += findResults.Items.Count;
which increments the offset based on the result of the last FindItems operation.
5) try something like
ItemView iv = new ItemView(100, 0);
FindItemsResults<Item> firesults = null;
PropertySet psPropSet = new PropertySet(BasePropertySet.IdOnly);
iv.PropertySet = psPropSet;
PropertySet itItemPropSet = new PropertySet(BasePropertySet.IdOnly) { ItemSchema.MimeContent, ItemSchema.Subject, EmailMessageSchema.From };
do
firesults = service.FindItems(WellKnownFolderName.Inbox, iv);
service.LoadPropertiesForItems(firesults.Items, itItemPropSet);
foreach(Item itItem in firesults){
Object MimeContent = null;
if(itItem.TryGetProperty(ItemSchema.MimeContent,out MimeContent)){
Console.WriteLine("Processing : " + itItem.Subject);
iv.Offset += firesults.Items.Count;
} while (firesults.MoreAvailable);
Cheers
Glen
.Offset += fiFitems.Items.Count;

Recovery data using Exchange Management Shell From Recovery Database

Recently Some of our employees had been requesting a restore of some deleted emails from earlier in the year. Through our Backup Exec 2012 the recovery of the emails were not working. After 2 weeks on the phone with Symantec we determined that theyre Granular
Recovery Technology was not functioning properly for whatever reasons. As a last resort we recovered the backup set to a recovery database and now need to use the management shell in Exchange in order to recover the emails. I am having trouble with the
syntax and wanted to see if anyone out there could help me with the necessary commands in order to recover emails. forgive me if i have left out any required information. i am still a student trying to learn

If you are interested in 3rd party products check out Lucid8's DigiScope
http://www.lucid8.com/product/digiscope.asp
which will allow you to open any offline Exchange Database within a familiar Outlook type GUI. Once opened you can Browse, Search, Export Mailboxes, Folders and Individual Items to PST & MSG or Recover data directly to any Production Exchange
server or mailbox.
Regarding the RDB commands, here is a good article
http://technet.microsoft.com/en-us/library/ee332351.aspx and also here are a couple of Examples
NOTE: The examples below assume that you have recovered the DB in question to the RDB and that a copy of the mailbox belonging to John_Doe is within the Recovery Database.
A: The command below will recover the mailbox called John_Doe from the Recovery Database called
RecoveryDatabase1 to the John_Doe mailbox in the live database. NOTE: This method relies on the original mailbox still being intact on the Production Server.
Use the Exchange Management Shell and run the following command:
Restore-Mailbox -Identity John_Doe -Recovery Database RecoveryDatabase1
B: You can also recover the John_Doe mailbox from the Recovery Database and place it into
a folder called "John_Doe Recovery" within a mailbox called BobTheManager.
Use the Exchange Management Shell and run the following command:
Restore-Mailbox -Identity BobTheManager -RecoveryDatabase RecoveryDatabase1 -RecoveryMailbox John_Doe -TargetFolder “John_Doe Recovery"
C: There is also the ability to search the mailbox content for keywords. In this example we
search for any messages containing the word “SecretStuff” and restore those items to a folder called “John_Doe recovery with SuperSecret text” within a mailbox called JaneSupervisor.
Use the Exchange Management Shell and run the following command:
Restore-Mailbox -Identity JaneSupervisor -RecoveryDatabase RecoveryDatabase1 -RecoveryMailbox John_Doe -SubjectKeywords "SecretStuff"
–TargetFolder “John_Doe recovery with SecretStuff"
Troy Werelius
www.Lucid8.com
Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline EDB's and Live Exchange Servers with Lucid8's DigiScope

How to migrate SharePoint 2013 Content and Configuration DataBases to a new SQL Server and DataBases in it?

Hi,
We need to migrate Our current 1 clustered SQL Server, Many Configurations DataBases and Many Content DataBases to a brand new clustered SQL server and brand new databases in it.
How can I do this?
Can someone list the steps involved?
Thanks.

Hi,
According to your description, you want to move Content databases and Configuration databases to a new SQL Server, refer to this article:
https://technet.microsoft.com/en-us/library/cc512725.aspx?f=255&MSPPError=-2147217396
Besides, here is a similar post, you can use as a reference:
https://social.technet.microsoft.com/Forums/office/en-US/2cd46f7a-d583-41b2-82c2-ddc6d7c43fb8/how-to-move-sharepoint-databases-to-new-sql-server?forum=sharepointadminprevious
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Best way to manage 8i and 9i databases?

Hi,
I'm looking for the best way to manage 8i, 9i, 10g and 11g databases with EM (of course, upgrading the 8i databases is not an option). I successfully installed OMS 12c, but the 12.1 agent will not connect to the 8i databases. What are the alternatives?
-The 10g agent can manage 8i, but will it be able to connect to 12.1 OMS?
-If this doesn't work, I guess I would need a 12.1 OMS for 9i, 10g and 11g databases, and a 10g OMS for the 8i databases. Is this a viable solution? Can 10g and 12.1 OMS coexist within the same environment?
I'm looking for the best scenario that actually works, I understand that anything that connects to 8i will not be supported.
Thanks.

Hi.
I'm afraid you got it right.
Let's distinguish between MONITORING- which is done by the agent and MANAGEMENT (administration, maintenance, performance management etc) - which is done directly from the OMS.
According to my experience:
OEM 10G is the last version that can fully MANAGE 8i databases.
OEM 11G can MONITOR 8i databases (via a 10G agent) but cannot MANAGE them (or in other words ,the 11G OMS cannot connect to 8i databases).
OEM 12C cannot MONITOR nor MANAGE 8i databases.
If you use OEM to fully manage your 8i databases (and plan to continue doing so) I suggest you keep a dedicated OEM 10G installation for those databases.
There's no problem using 2 different OMS installations and many organizations choose to do so for various reasons.
The downsides are that you'll need to duplicate your OEM configurations (monitoring templates, rules etc) and of course- you won't be able to manage all databases in a single console...
If you use OEM to only monitor the 8i databases, you can create a set of user defined metrics that will run against a 9i database and will connect to the 8i databases via DB Link.
This solution is far from ideal but it might eliminate the need for maintaining another OMS installation if all you need is monitoring the 8i databases.
Erez.

Data sync between on-premise and azure database

HI, I am not able to setup data sync between my on-premise database and azure database. Following is the error I am getting after it ran for almost 36 hours...
Sync failed with the exception "GetStatus failed with exception:Sync worker failed, checked by GetStatus method. Failure details:An unexpected error occurred when applying batch file C:\Resources\directory\4c6dc848db5a4ae88265ee5aa1d44f40.NTierSyncServiceWorkerRole.LS1\DSS_7b1d73b4-d125-466f-94ab-eaa4553ea0ae\ed19f805-3d50-466a-96b3-861c4f22d8a4.batch.
See the inner exception for more details.Inner exception: Failed to execute the command 'UpdateCommand' for table 'dbo.Transactions'; the transaction was rolled back. Ensure that the command syntax is correct.Inner exception: SqlException Error Code: -2146232060
- SqlError Number:10054, Message: A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.) " For more information,
provide tracing ID ‘e6a1fad1-f995-4ffe-85db-0c6dc02423f1’ to customer support.

Hi, sorry it has been a long time since your last post. Are you still using SQL Data Sync and hitting any issue which we could help with?
Linda

Does EM 12.1.0.3 support Oracle DB 12c as managed target and repository database?

Oracle released EM cloud control 12.1.0.3 last week. The certification matrix on My Oracle Support does not list Oracle database 12c as a supported managed target or repository database. Is the cert matrix wrong, or does Oracle have no version of cloud control that supports the 12c database?
Thanks

Oracle database 12c is supported as a managed target - but not as repository. MOS is being updated to reflect this shortly.

Data migration b/w r11 and r12

Hi,
the place i worked have boht R11 & R12 intances, i need to move some clients (shared service cnetre) from r11 to r12. In terms fo data i.e. AP, AR & GL. i need to find a quick way around.
My concern is
1) should i just move the Open POs if yes /no then y
2) how about customers and suppliers
3)Open & closed invoices (AR)
used to do balance tranfer, but there are some complications and is time consuming as well. Please share your thoughts and experience on above and if possible a step by step process that you know or have used

Dear Renny,
1) Identify the data source used
2) Use transaction RSA3 in BW and R/3 for this datasource.
3) Try to test data for a month say May 2007
4) If it is the same, may be you are not using proper selection conditions in the Infopackage.
If it helps even a bit, do allocate *points
regards
Vinay

I have a MacBook Pro (13-inch, Mid 2010) and iMac (27-inch, Late 2012) - can I work between both?

I have been using my MacBook Pro for several years and still use it on-the-go but at home now I have the Late 2012 iMac, I bought a Thunderbolt cable but found it wouldn't work with the MBP.
When I'm working on the laptop - and I return home - is there a way I can then transfer the work to the iMac and vise-versa.
Obviously cloud services like Dropbox exist but I'm looking for an alternative as I transfer quite a lot of files.

Hi there,
The simplest way is to drag it across wirelessly using the 'Airdrop' application once both computers are near one another. 'Airdrop' can be found near the top, on the left hand side menu, within 'Finder'.
AJ

Uk date format issue with ASP and Access Database

I have an Asp form which updates records in an Access
database. Problem is
that the date format in the database record is dd/mm/yyyy
(UK), when
the record is displayed on the form it is mm/dd/yyyy(US)
which after I
update the record in the database the date has changed to the
new format.
I have tried everything I can to change the format but to no
avail...anyone any ideas how I can resolve this issue?
Thanks
Steve

stevo.s wrote:
> Hi
>
> I have tried changing the format on the date field on
the server behaviours
> panelto ddmmyyy. Also have tried to set the form field
format to ddmmyy. I have
> also tried to use a function I got from a posting
somehwere on the net to no
> avail. <%function ddmmyyyy(varDate)
> ddmmyyyy = Day(DateValue(varDate)) & "/" &
Month(DateValue(varDate))
> & "/" & Year(DateValue(varDate))
> end function
>
> I believe that this is a recognised issue with
Dreamweaver and Access but
> can't seem to grasp the work around! Problem being I am
teaching myself through
> books and internet articles and can be weeks at a time
without being able to
> look at the issue..each time I come back to it it is
like starting all over
> again! I was hoping that somewhere out there there is a
simple solution the
> issue perhaps a date picker with the built in
functionality to address the
> issue...I am keen to understand how to deal with the
issue rather than just
> change my database date field to fudge the problem as I
am in the UK and when I
> eventually start to use the application I would like
there to be some
> consistency with dates and that users are familiar with
the format.
>
> Any help gratefully received!
Its not Dreamweaver, or Access, its your servers locale, its
set to US
format, not the UK.
On your page at the top use:
<% Session.LCID = 2057 %>
This will force the page into using UK formatted dates. Use
it on any
page that needs to format the page correctly.
Dooza
Posting Guidelines
http://www.adobe.com/support/forums/guidelines.html
How To Ask Smart Questions
http://www.catb.org/esr/faqs/smart-questions.html

Data Migration Service Manager 2010 and 2012 database to SCSM 2012 R2

Similar Messages

Maybe you are looking for