Data Missing in formulation Material

Hi, The data that was entered in the Factor and the G/L columns for Alternate Inputs materials are missing in Formulation. This data will be added automatically, but when for one formulation it got missed. Can you please help me in knowing the problem behind this issue. Please help! Thanks, Rohini

Rohini,
I assume you're creating from a formulation template. is this correct? if so, can you check the audit trail tab to verify the correct template was selected? if you confirm the correct template was used and has alternate inputs defined, then I suggest submitting an SR with support with steps to reproduce and screenshots. If possible, a video showing the behavior will help the most.
also, be sure to reference this forum thread in the SR.
-Matt

Similar Messages

Line item Shipping data missing in STO

Hi, I am making an STO ( same company code ). I have added 4 line items in the STO.
For three line items, everything is ok. But when I added the fourth line item , the system gives an information message that sales org data and shipping data could not be found for the 4th line item.
And so I could not see the shipping data(consisting of delivery type, shipping point etc) tab for the 4th line item. For the first three items, the shipping tab exists.
The material for the 4th line item exists in both supplying and receiving plant and the material also exists in relevant sales org.
The outcome of the above issue is that the 4th line item is not copied to delivery with ref to STO !
Could any tell what is the config missing or what I need to do so that I have the shipping data for the 4th line item of the STO ?
regards
Pamela

Hi,
Check Below points relevant to your shipping maintained correctly.
u2022Shipping Data Determination
◦Shipping data (table EKPV) in STO is determined depending on:
1.Supplying Plant
2.Ship-to (customer of the receiving plant)
(IMG -> MM -> Purchasing -> Purchasing Order -Set up Stock Transfer Order -> Define Shipping Data for Plants)
3.Material Master Data
4.Delivery Type
(IMG -> MM -> Purchasing -> Purchasing Order -Set up Stock Transfer Order -> Assign Delivery Type and Checking Rule)
◦Shipping data determination:
1.Sales Area: from supplying plant (T001W) (See SAP notes 169586, 170029, 170075, 170082, 303957)
2.Shipping Condition: default order type (u2018DLu2019) for delivery type (TVLK-DAART), otherwise customer master data (KNVV-VSBED)Delivery priority: material/customer/distribution chain (KNMT), otherwise customer master data (KNVV-LPRIO)
3.Unloading Point: from Ship-to, if available
4.Shipping Point: loading group/shipping condition/supplying plant (TVSTZ)
5.Route: usual criteria for route determination (TROLZ)
6.Delivery Type: Purchase order category/document type/supplying plant (T161V, different delivery types)
7.Route Schedule: with delivery scheduling (T161V)
8.Loading Group and Transportation Group: material master data (MARA, MARC)
9.Language of Material Description: customer master data (KNA1-SPRAS) (to read material master data from MAKT)
10.Incoterms: customer master data, from purchase order
11.Indicator for Order Combination: customer master data
12.Indicator for Partial Deliveries: material/customer/distribution chain (KNMT), otherwise customer master data (KNVV-KZTLF

Error: Export data missing

while Invoice-Release to accounting I got error as "Export data missing"
when I check I found that Foreign trade data is incomplete as per system. Also I have seen foreign trade no also in invoice foreign trade/customes view.
I dont know why this error is coming. system is asking to complete foreign trade for which no customizations available.
So I want to know what triggers to generate foreign trade no means why it has become essentials to provide these data?
which master data are important to trigger foreign trade? I have not maintained anything in foreign tarde view in material master.
Also let me know how can I resolve this problem?
Vijay

Hi Vijay,
The note 173411 described that there are hard-coded checks for the
listed in the note. If you choose for business reasons not to use the
incompletion procedure, then it can be de-activated. For this, kindly
refer to note 118573.
Please complete the following steps:
- create a new customer project via CMOD.
- assign the enhancement V50EPROP (which contains the userexits) to
the customer project.
- place source code inside the include found in exit_saplv50e_005
& _006, for example,
INCLUDE ZXV50U06
       if ( i_exp_imp_flag eq 'E' ).
         clear: c_complete.
         c_complete = 'X'.
       endif.
- generate the two new objects (exit_saplv50e_005 & _006) via
SE37.
- activate the project via CMOD.
========================================================================
If foreign trade functionalities are to be used, the corresponding
customizations must be maintained using transaction VI29 and VI49.
note 354222    Foreign trade data incomplete for domestic business
may also be helpful.
Thanks,
Alex

Product sales area data missing in crm

hi, expert
I'm currently having a problem with some of the products that are being replicated from R/3 to CRM.Product sales data initial synchronization is complete from ecc to r3,user create order is ok in crm.After a period of time,product sales area data missing in crm,we don't know when is lost,the problem is that we can't do an order for several products because there's no data in the sales and distribution tab(Sales Org., Distribution Channel) of the product master in CRM.

Hi ,
What you can do is,
Create a request for a material whose Sales Area data is missing in
CRM , and perform the request load in transaction:R3AR4.
And please check whether sales area data flows to CRM.
Put a filter in txn:R3AC1, to download single material or material
range.And before performing an initial load in txn:R3AS,please make
sure that sales area data is missing in CRM.Now, perform the initial
load in txn:R3AS.And please check whether sales area data flows to
CRM.
Check the filter settings in transaction R3AC1 for
object MATERIAL and please make sure that it would bring down all
the expected materials from R/3 along with the sales area data. I guess there is some
filter setting which is blocking it.
Please check the entries you have maintained in table MVKE - the entries
for the sales data maintained here must match with the ones maintained in the
filters.
thanks & regards,
Krishnen
Edited by: Krishnen Subramanian on Aug 9, 2011 8:47 AM

Error " Data missing for the entry check while creating a new waste code

Hi all, While setting a new Waste code I get the error " Data missing for the entry check, correction:". while filling the NAM- WASTECOCAT - LER item.
This sould look for the catalog's name included in the phrase set but for some reason it doesn't find it giving me this error.
I am changing original Characteristics, phrase set, classes, and value assignment type. Just to have my own estructure with Znames for all of them.
I have also change the enviroment parameter "WAM_PHRSET_WACATLG" with the name of my phrase set.
I have checked everything several times watching for typos or looking for a missing step.
I have even tried including my new Z's characteristics in the classe and living the original SAP_EHS_1024_001_WASTE_CATALOG. (changing the enviroment parameter WAM_PHRSET_WACATLG to SAP_EHS_1024_001_WASTE_CATALOG) and it works.
I will like to change this characteristic by Z_EHS_WA_WASTE_CATALOG
Phrase set to Z_EHS_WA_WASTE_CATALOG.
enviroment parameter WAM_PHRSET_WACATLG= Z_EHS_WA_WASTE_CATALOG
After matching up the master data It should work fine but I might be missing something to get it running ok.
¿Any idea?
Regards,
Alvaro

Hello Juan Carlos, the value and class that I want to duplicate and doesn't work is for Waste Code, I have also duplicated the one you have displayed (waste pproperties) without any problem.
1.I have duplicated and changed class SAP_EHS_1024_001. to Z_EHS_WA
2. Create a copy of the 5 characteristics included in this class.
SAP_EHS_1024_001_WASTE_CATALOG
SAP_EHS_1024_001_WASTE_CODE
SAP_EHS_1024_001_WA_SUBCATEG
SAP_EHS_1024_001_WA_CATEGORY
SAP_EHS_1024_001_REMARK
change the name by
Z_EHS_WA_WASTE_CATALOG
Z_EHS_WA_WASTE_CODE
Z_EHS_WA_SUBCATEG
Z_EHS_WA_CATEGORY
Z_EHS_WA_REMARK.
I checked the funcion C14K_WASTECATLG_CHECK is in the value of the Z_EHS_WA_WASTE_CODE characteristic
I checked the funcion C14K_WASTECODE_CHECK is in the value of the Z_EHS_WA_WASTE_CATALOG characteristic
3. Create phrase sets for each new category. with same name.
4. Match up the master data.
5. Change the enviroment parameter.to Z_EHS_WA_WASTE_CATALOG
I think I have followed all the steps, but for some reason it doesn't find the catalog
The phrase for the catalog is EWC in english and LER in spanish.
Regards
Alvaro.

Error in Billing doc posing to FI - Export data missing

Hi Experts ,
While releasing SD Bills to Accounting Some export documents are not posted to FI and posting status is given 'G' (Posting document not created export data missing ).
Please give me solution which data may missing to post export billing documents to FI.
Amol

Hi amol
Go to VF02 and first go to item data -> foreign trade data tab and click on the incompletion log , you will get the list what all to be filled . Once you complete. then go to header data -> foreign trade data tab and click on the incompletion log ,you will get the list of data which has to be filled and you can fill it and save it .
Then once the billing document is saved it will be passed on to FI
Regards
Srinath

Schedule line item data missing in Purchase order form in ECC6.0

Hi All,
We are doing ECC6.0 upgradation project . I am trying to print Purchase order in ECC6.0 , all data is coming fine in PO except schedule line item data is missing.
Same print program and form works fine in 4.7E but schedule line item data missing in ECC6.0.
Print program is a copy of standard SAP program SAPFM06P and layoutset is a copy of MEDRUCK.
If anyone knows if there is any OSS note for the standard print program or any solution please let me know.
Thanks,
Sonali.

Resolved on own.

Posting Document not created (export data missing)

We are working on ECC 6.0 and during creation of Cancellation Billing document type IVS for the Intercompany billing, the document did not create Accounting document giving the Posting status as G - Posting document not created (export data missing). However checked the Foreign trade data and the system states that Foreign trade is complete.
Can any one suggest the solution for this?
Thanks.

Hello Mohammad,
About this issue, the incompletion of this cancellation document
arises might because the reference delivery has been archived/deleted.
This is likely due to your current copy control settings (VTFL).
If you have set ' ', in the export determination field this means that
there is a common 'exnum' key between the delivery and billing documents
LIKP-EXNUM & VBRK-EXNUM are the same.
The result of deleting the delivery is that you also delete the FT data
for the delivery, Because the billing document and delivery share the
same foreign trade table entries, you have in effect deleted the FT data
of the billing document too. This would most likely go unnoticed but if
you then cancel the invoice the system has no FT to copy into the new
cancellation billing document, which leads to this issue.
Firstly you should set the export determination flag in the copy control
of the delivery & billing documents. This will avoid this issue in the
future. Set it to to 'A' or 'B' depending on your requirements.
For the incomplete cancellation billing document, you could use userexit to
set it as complete:
You can use transaction CMOD.
Create a project for example FT project button create short text: ....
drop button Enhancement assignment & save use for example local object.
Use the F4-help for Enhancement and look for V50EPROP.
Drop button Components:
here you will find EXIT_SAPLV50E_005 and EXIT_SAPLV50E_006
In the userexits doubleclick on the includes ZXV50U05 and ZXV50U06
The coding in the userexits should be: C_COMPLETE = 'X'.
Afterwards activate generate ... and save.
The development class is VEI.
Please also check note 118573 which explains the FT user exits.
Regards,
Alex

Smartview - HypExecuteQuery with suppress rows 'No Data/Missing'

Hello,
I'm executing a MDX query by executing the command 'HypExecuteQuery' and I set the options suppress rows 'No Data/Missing'.
But everytime, the query is working successully but without suppressing missing data.
Does someone know it the suppress missing rows is compatible with the hypExecuteQuery or 'Execute MDX' ?
SmartView 11.1.2.5.210
Office 2010
Thanks in advance for your answer
Best Regards
Benjamin

Hello,
The solution is as follows :
SELECT
NON EMPTY {[MEMBER_NAME]} ON ROWS,
NON EMPTY{[MEMBER_NAME]} ON COLUMNS
FROM <APP>.<DB>

Since mountain lion Find in Numbers 3-4 columns of data missing and some columns in the wrong order. Fortunately I have a back up on my iPad and was able to put that version in as a new file. Why has this happened ?

Since mountain lion I have noticed 3-4 columns of data missing from a Numbers file. I have fortunately been able to replace the total file from my iPad version but why has this happened. Makes me lose trust in Numbers

That would be strange.

Passing DateArray or Date Range from formula result to Select Expert

Is there a way to pass Two (2) dates from a single formula to the Select Expert?
I calculate Beginning and Ending dates of periods ie: fiscal year to date, calendar year to date, last calendar quarter. I would like to pass both the beginning and end date to a formula in the Select Expert.
Please show code samples if possible.
Thanks

In your selection criteria, have code similar to this:
datevar begindate; // this is from your formula for date range
datevar enddate; // this is from your formula for date range
{database.datefield} in begindate to enddate;
Edited by: Sanjay Kodidine on Jun 27, 2009 11:43 AM

Effective date for a Formulation row

Hi,
our customer manage in JDE the effective date for each formulation row.
I.e.: In a particular formulation a particular salt is valid from 1-gen-2013 to 1-feb-2013.
In the same formulation another salt is valid from 2-feb-2013 to 1-mar-2013.
Is there a way to handle this also in PLM4P? Are there other customer that have the same formula management?
I hope my question is clear.
Thanks and regards.
Stefano.

Hi Stefano,
have you thought about using the Alternate Input Items to achieve this scenario? you can put description to clarify that the particular salt only available in certain amount of time. Hope this will be helpful.
Thanks,
Jessie

Units from the additonal data tab of the material master

HI Gurus,
can anybody please tell me how we can pull the units from the units of measure tab of the additonal data data tab of the material master?
Thanks
Anusha

Hello,
Are you asking about the Table where you can see the entry for UOM in Material Master?
If this is your question then answer is It is MARA1 & MARM where you can see the UOM.
regards,
Prashant Rathore.

Logical Data base MSM vs Material master table MARA/MARC

Hi Experts,
What is the different between the logical data base (LDB) and the normal SAP table, for example MSM vs MARA/MARC/MBEW table. ? I mean we usually refer data to the normal SAP table in download or ABAP, what is the use of logical data base (exp MSM Material master) can download data or refer to MSM in ABAP?? Please help.
Best regards,
Eric

A logical database provides a particular view of database tables in the R/3 System. It is always worth using logical databases if the structure of the data that you want to read corresponds to a view available through a logical database.

Database exceptions data missing in SMD 7.1

Hello all,
I have configured SMD on SolMan 7.1 SP03. I successfully connected 2 systems (ABAP single and JAVA single) to technical monitoring. Also SolMan self-monitoring was configured successfully. I can see some monitoring data in solman_workcenter, but I don't see any data in section Database Exceptions and Database performance like e.g. tablespace usage, last successful backup, reads per usercall etc... I can see current data in Database availability section - archiver status, instance status etc... There are obviously some data missing in BI as I get an info message : "No data has been transferred to BI system up to now for metric .....". Unfortunately I can't find out where is the problem so far. I can see SMD agents are connected and pushing other data (ABAP and host related) to SMD w/o any problems. Any hint is appreciated.
Thanks.

Hi,
Check this: http://help.sap.com/saphelp_sm71_sp01/helpdata/en/f7/51b87f807344eba0ddca2d2174cbee/frameset.htm
"A remote database connection between the DBA Cockpit and the remote database is configured and available, to gather the data for tablespaces, availability, backup status, etc. remotely. The prerequisites for database administration and monitoring are described in SAP note 1027146."
Cheers,
Diego.

Data Missing in formulation Material

Similar Messages

Maybe you are looking for