Line item Shipping data missing in STO

Hi, I am making an STO ( same company code ). I have added 4 line items in the STO.
For three line items, everything is ok. But when I added the fourth line item , the system gives an information message that sales org data and shipping data could not be found for the 4th line item.
And so I could not see the shipping data(consisting of delivery type, shipping point etc) tab for the 4th line item. For the first three items, the shipping tab exists.
The material for the 4th line item exists in both supplying and receiving plant and the material also exists in relevant sales org.
The outcome of the above issue is that the 4th line item is not copied to delivery with ref to STO !
Could any tell what is the config missing or what I need to do so that I have the shipping data for the 4th line item of the STO ?
regards
Pamela

Hi,
Check  Below points relevant to your shipping maintained correctly.
u2022Shipping Data Determination
◦Shipping data (table EKPV) in STO is determined depending on:
1.Supplying Plant
2.Ship-to (customer of the receiving plant)
(IMG -> MM -> Purchasing -> Purchasing Order -Set up Stock Transfer Order -> Define Shipping Data for Plants)
3.Material Master Data
4.Delivery Type
(IMG -> MM -> Purchasing -> Purchasing Order -Set up Stock Transfer Order -> Assign Delivery Type and Checking Rule)
◦Shipping data determination:
1.Sales Area: from supplying plant (T001W) (See SAP notes 169586, 170029, 170075, 170082, 303957)
2.Shipping Condition: default order type (u2018DLu2019) for delivery type (TVLK-DAART), otherwise customer master data (KNVV-VSBED)Delivery priority: material/customer/distribution chain (KNMT), otherwise customer master data (KNVV-LPRIO)
3.Unloading Point: from Ship-to, if available
4.Shipping Point: loading group/shipping condition/supplying plant (TVSTZ)
5.Route: usual criteria for route determination (TROLZ)
6.Delivery Type: Purchase order category/document type/supplying plant (T161V, different delivery types)
7.Route Schedule: with delivery scheduling (T161V)
8.Loading Group and Transportation Group: material master data (MARA, MARC)
9.Language of Material Description: customer master data (KNA1-SPRAS) (to read material master data from MAKT)
10.Incoterms: customer master data, from purchase order
11.Indicator for Order Combination: customer master data
12.Indicator for Partial Deliveries: material/customer/distribution chain (KNMT), otherwise customer master data (KNVV-KZTLF

Similar Messages

  • Which all tables suffice all line item GL data requirements

    Please clarify this requirement for Line Item Data from  New GL. my client BMW Inc have configured  New GL in ECC 6.0  if i pull all the records to BW from FAGLFLEXA (Line Item Table) is that sufficient to meet the <b>all line item GL data</b> or is there any other tables missing that also shall be combined to bring the Line item GL  data. Please help me for this if u can check with any of your friends in FICO.  
    2. I have seen that BSEG AND BKPF are used earlier in old FI  versions so what is there now in New GL ECC 6.0 that will suffice for these BSEG AND BKPF  or still i have to pull records by using these tables. for GL Line Item Data.
    If you can help me to give the short  overview of  New GL posting process it would be great.
    Thanks
    Regards
    Soniya Kapoor

    Hi Soniya,
    FAGLFLEXA & FAGLFLEXT would contain all FI line item
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/a8/e26840b151181ce10000000a1550b0/content.htm
    Pls assign points as way to say thanks

  • Line item Ship-to Info is not the same in Header Ship-to Party During Sales Order Creation via IDOC

    We have observed that during creation of sales order using idoc, the line item ship-to party is not the same with header ship-to. The ship-to party info in line item is equivalent to the header's sold to party. To give you a quick background, Sold to party info is given in idoc and ship to party is being determined using table EDPAR. In this specific scenario, sold to customer is not the same with ship to customer.
    Initial checking on the code leads us in function module VIEW_KUAGV. This FM populates partner details of sales order header and line item in program LVEDAF1Z
    Below is the code for Sales order Header. Notice that WE_INPUT parameter which contains Ship to party is passed as exporting parameter in FM VIEW_KUAGV. This is the reason why Ship to Party is populated correctly in sales order header but not in sales order item.
    Initially, it first set to Sold-To Party. However, if WE_INPUT is given or provided, partner details is set to Ship-To Party.
    Please advise on how we can make the ship to party info in header and line item be consistent. This is SAP Standard program which why we are hesitant to make change on the program. If there is a configuration to make this happen, kindly advise.
    Regards,
    Rommel

    Hi Jayesh,
    If I understand you correctly, you want that when creating SO from Quoatation
    the Ship to Party also follow/copy Ship to Party from Quotation, right?
    Just to confirm with you, when you creating SO reference from Quotation, you
    use copy/follow-up function, am I right?
    You can do this by setting in configuration of Copy Control (like mentioned by Hui).
    Step as follow :
    1. Go to IMG->CRM->Transactions->Basic Settings->Copying Control for
        Business Transactions
    2. Create your BAdi (Business Add-In for Copying Control), such as get Ship to
        Party value from source document and use it in current document
    3. Use this Rule you have created in BAdi (no. 2), in copy control transaction type
        IMG->CRM->Transactions->Basic Settings->Copying Control for
        Business Transactions-> Define Copying Control for Transaction Types
    4. Here you set Copying Routine for your transaction types (put name of your Badi
        created in step no. 2)
    Or alternatively, you can set it on access sequence in Partner Function
    Ship to Party in configuration. You can define access sequence the Ship
    to Party is taken from Preceeding Document -> Ship To Party
    1. Go to Partner Function access sequence :
        IMG->CRM->Basic Functions->Partner Processing->Define Access Sequence
    2. Create new access sequence with following entry :
        - Source COM_PARTNER_A (PrecedingPartner)
        - Check Mapping for Partner Being search
        - Partner Function in Source  = Ship To Party
    3. Assign this Access Sequence in you Partner Function used in Sales Order Transaction
       Type.
    Tell me if this is what you looking for
    Gun.

  • Purchase Order Line Item Creation DATE ?

    Hi All ,
    How can we fine the Line item creation date in PO ? I know EKPO-AEDAT but that is chaged date and its get updated if you chage the line Item after creating it . I need creation date for a perticular Line Item how can we get that ?. thanks in advance , I'll reward if useful.
    Thanks ,
    Lucky.

    Item creation is same as Order date of schedule line
    EKET-BEDAT
    Thanks
    Seshu

  • Invoice line items - inconsistant data returned from RV_BILLING_PRINT_VIEW

    Hi there,
    We are using a modified version of SAP standard Print Program RVADIN01 for our invoices, for many years now.
    Everything works fine 99.9% of the time. Every now and again though, there is issue with the invoice, the root of which is data brought back from RV_BILLING_PRINT_VIEW .
    From debugging the latest issue, I can see that the standard FM RV_BILLING_PRINT_VIEW, which is bringing back data for line items, is not filling all the data in certain cases.
    For example, yesterday we had an invoice with 10 line items - this FM brought back full data for 9 line items, but the first was missing data in fields such as LAND_WE, SPRAS_WE etc. This then lead to a problem with text being read from T604T for that line.
    I've checked that data being sent to RV_BILLING_PRINT_VIEW, and it looks correct.
    I've checked and been assured that Master data is maintained correctly etc.
    Does anyone have any thoughts on this or experience of something similar?
    Thanks,
    David

    Hi Vijaymadhur,
    Thanks for your response - I checked again in VF03, and the Ship-to is maintained for this line.
    Infact, the second invoice line is almost identical to the first (except for quantity) and the FM brings back the correct ship-to etc. for that line.
    Thanks,
    David

  • Unable to delete master data line items - Master data object CCHIUSRAM

    Hello
    We have an issue with the Master data Object CCHIUSRAM - CC Hier User Auth Maintenance. It has only master data and no texts no hierarchy. It is not time-dependent. It has /BIC/PCCHIUSRAM, /BIC/SCCHIUSRAM as database table only. This master data is not being used in any infoproviders.
    In development client we are able to delete the line items of the Master data along with entering line items. RSRV check gives green for all checks.
    In Test / Production client we are not able to delete the line items of the Master data. We are only able to enter master data lines and if we change any item then it creates another entry in the table.
    Tried SE14 & RSDMD_DEL_MASTER_DATA - both does not help.
    Did ST05 trace, could not find something concrete.
    If any one has faced such an issue with any master data item then a response is much appreciated. It has become a bottleneck for us.
    Many Thanks in advance
    Pradip Parmar

    Thanks for the response.
    I can do this in EBD, but it is working fine in EBD. I cannot do this activity in EBP / EBT as the systems are closed and I cannot activate directly in EBT / EBP.
    Besides, I have recently transported active versions of the object in EBT / EBP all again twice to see if it changes anything.
    My guess is that, there is something stupid may be I am missing somewhere.
    Any help is much appreciated.
    Thanks

  • Third Party GRN Posting Date to be Copied to Sales Order Line item Billing Date

    Hello Experts
    I have a client requirement where in they want to bill line items in the sales order ( third party process ) to the end customer in sync with the GRN posting dates happened in the PO
    For EG if GRN happened on 1st July 2014 then Billing Date should come in as 31st July 2014 so when they execute VF04 giving from and to dates as 1st july to 31st corresponding sales order can be invoiced
    Actual problem is for suppose if i create a sales order in the month of june say 26th basing on the factory calendar setting and invoicing list maintained in the customer master system defaults the billing date to 30th June 2014 , and the same when user runs VF04 from 1st June to 30th June this sales order shows as due and mistakenly end user invoices the customer ( whereas logical GR would have only received in July 1st )
    My requirement is similar to below threads but i am unable to find answer how to copy GR Posting date to Billing Date of the sales order line item
    use GR Doc date as billing date
    3rd party sales process (w/o ship notif) - Billing

    Hi Lakshmipathi ji,
    As my requirement is to update the billing date at the sales order line item level , As a process user goes in executes VF04
    For Ex
    Sales Order Created Date is 1st June 2014 then System Defaults Billing Date at line item to 30th June 2014
    Now when i do GRN suppose on 1st July 2014 for that line item , system should trigger a code where in check the posting date of the GRN and override the same in the Biiling Date field of the sales order line item
    So when VF04 is run for a month All the GRN which are recieved in the month of July are invoiced in July
    Please share me your thoughts do we need to check any userexits from MM side which reads the posting date of GRN and then copies in to my third party sales order
    Regards
    Hiba

  • Vendor line item due date error

    I found the net due date in vendor line item report is not correct. vendor payment term is 30 days, accounting document posting date is Jan1. 2010,but net due date is Jan.1.2010, it should be 1.Feb,2010.
    why system calculate wrongly? Thanks

    Is it a credit memo ?
    For a credit memo the due date is the baseline date. This is the default rule. If you want that the credit memo is taken in account with payment terms, you must either link it to an invoice by filling the field REBZG with the invoice number either put the constant 'V' in the same field (REBZG). With 'V' in REBZG, the credit memo is taken in F110 according to its payment term.
    see documentation of data element REBZG.

  • Cost center  report with line items by date

    Hi guys,
    i need to create a report by date, for cost centers that displays individual line items?,
    do u know if there is a bapi or  RFC for this?
    what tables are related for line items dates?
    i already know that coep but this table has period and not by date
    any ideas?
    tks in advance

    Hi,
    You can check out std reports like KSB1, KSB2, KSBP, KSB5.
    Also check Accounting-> controllong-> Cost center accounting-> Info system-> Reports for cost center accounting-> line items/more reports.
    Tables: COSP, COEP, COBK
    FM: K_KKB_KKBCS_COST_CENTER_REPORT
    Regards,
    Amit

  • AUC line items - payment date

    Hi,
    The Client requires payment dates for AUC line items so as to capitalise the line item based on a Zee report.
    If this is possible, please let me know table relevant.  Or the process flow.
    Regards,
    Ashok

    Payment dates can be had from the vendor account. FBL1N can provide that. See if you can filter through PO number under the dynamic selection.

  • Line item attachments were missing for the documents in FB03

    Hi all ,
    i had an issue that within the transaction FB03,  attachments for line items were missing for all the documents that were posted from zprogram (artist statement) but attachments for the header items were displayed .
    Is there any clue why these attachments are missing.
    help me out of this.................!

    Check that that document key has been specified correctly. How are you storing the attachments??

  • Purchase Order Item Shipping Data Update

    Hi xperts,
    I need to update shipping data of purchase order item. I need to update the Unloading Point (ablad) field. Inside exit 'EXIT_SAPMM06E_013' I am changing value of field xekpv-ablad. but the value is not updated in the purchase order. Please advise.

    Hi
    1 Activate the Project in which u have included this User exit.
    2. also check in which client you are checking
    3  Debug and see whether u code is executed and also after saving check the Table EKPV   whether inforamtion gets update or not.
    Or else use Classs IF_PURCHASE_ORDER_ITEM_MM---- METHOD -
    GET_SHIPPING_DATA
    surya

  • Order Line Schedule Ship Date

    Hi ,
    How is the schedule ship date in order line calculated?
    Currently its taking from Request date when i try to schedule it from tools .
    I tried to modify this through defaulting rules but it doesnt take effect.
    The requirement is :
    Schedule ship date=Request date +Transit Time
    How do i take the transit time from the ship method ?
    Thanks

    Why Cant the Schedule ship date be less than Request date in Order line when Request Type is Arrival?
    I followed the document 262124.1 which was mentioned in the document 251449.1.
    The setup is only partially working for me .
    For example the document mentions:
    Scenario :
    Ist Case(Works Fine)
    If Order Date Type - Ship, then we add the Transit Time to the Scheduled Ship Date to get the  Scheduled Arrival Date
    Request Date =23-Sep-2010
    Transit Time =3 days
    Request type in Customer ship to= Ship
    After booking:
    Schedule ship date=23-Sep-2010
    Schedule Arrival Date=26-Sep-2010
    2nd Case (Doesnt Work)
    If Order Date Type - Arrival, then we subtract Transit Time from the Scheduled Arrival Date to get the Scheduled Ship Date for the order line.
    Request Date =23-Sep-2010
    Transit Time =3 days
    Request type in Customer ship to= Arrival
    After booking:
    It should be
    Schedule ship date=20-Sep-2010
    Schedule Arrival Date=23-Sep-2010
    But i Get
    Schedule ship date=23-Sep-2010
    Schedule Arrival Date=26-Sep-2010
    Please advise .

  • CRMD_ORDER Item Details TAB one of line item setting date as 12/31/1899

    Hi Experts,
    We have 3 line item for order, we call it as main line, return line and replacement line item. When we select Return line item and go to Dates Tab it shows all the dates related to that.  Here Depot send the date via XML File and it is getting set as "Depot Received Date", But when some orders get cancelled as depot dosent received that order they send blank date in XML File, but it save the date as "12/31/1899 16:00" . I am not able to get how it is getting set.
    Please help me regarding this, Where should i check for this?
    Regards,
    Poonam

    Hi,
    This is unfortunately not possible with standards but you may try using Badi ME_PROCESS_PO_CUST => PROCESS_ACCOUNT.
    Regards

  • Sales Order line item pricing date

    Hi,
    When adding a new line item to an existing Sales Order, do NOT allow the pricing date to be > 6 months old.   There are open sales orders that can be a year old.  They have line items added to them as part of the entire order.  The header VBKD-PRSDT is copied in to the new line items.  This affects the pricing. The users want the pricing to be current (within the past 6 months).
    It is difficult to change the new line item vbkd-prsdt without affecting the header vbkd-prsdt.   
    Any suggestions?
    thanks,
    Barb Czerniak

    Hello Shiva,
    The line item I am looking at has the item category of Z0N1 (used for Stock item), but when I go into copy control using tcode (VTFA) under item level, I don't see this item category as one of the options for selection. Is that normal?
    Thanks,
    Brijesh

Maybe you are looking for