Data not entering the BPM

Hi all,
we are getting the following error while executing our BPM:Error during delivery of message 4A1544A8556D5066E10000000F8DE018 to receive processes.
The file isn't going to the receive step in the BPM.
Can anyone tell me what this error means and how to debug it?

may be because of mismatch between the message type included in the BPM and that in the corresponding Configuration objects....just cross-check
Regards,
Abhishek.

Similar Messages

How can a webpage refresh automatically if some new data has entered the da

hi,
How can a webpage refresh automatically if some new data has entered the database.
with thanks
jp reddy

There have been several discussions on related topics. HTTP/HTML is not a "push" protocol and therefore is not well suited for this type of application. I would recommend setting a reasonable refresh rate using a META tag or switching to another technology (i.e. Applets) that can provide a push environment.

While not enter the cycle...

because the procedure did not execute the process ...
While not enter the cycle ...
create or replace
Procedure metodo_inventario( tipo_inventario varchar2 )
is
cursor compras is select id_tp_movimiento
from c_factura_aux
where estado = 1
and fecha_Factura = (select min(fecha_factura)
from c_factura_aux
where estado = 1);
pl_aux number;
pl_fecha_factura date;
pl_numero_factura number;
pl_id_tp_movimiento number;
pl_id_tp_movimientos NUMBER;
pl_id_producto number;
pl_cantidad number;
pl_vlr_unitario number;
pl_vlr_vairable number;
pl_vlr_peps number;
pl_vlr_upes number;
pl_sum_aux number;
pl_cant_aux number;
pl_vlr_promedio number;
pl_vlr_variable number;
cont number;
Begin
 pl_vlr_promedio :=0;
 pl_vlr_peps :=0;
 pl_vlr_upes :=0;
 pl_sum_aux :=0;
 pl_cant_aux :=0;
cont :=0;
--pl_id_tp_movimientos := 0;
--pl_id_tp_movimiento := 0;
DBMS_OUTPUT.PUT_LINE('<<---- Se acabo de declarar las variables -->>> ');
DBMS_OUTPUT.PUT_LINE('----- ');
 --if (tipo_inventario = '%PEPS%') then
open compras;
DBMS_OUTPUT.PUT_LINE('Se abrio el cursor -->>> ');
fetch compras into plid_tp_movimiento;_*
while compras%found loop*
DBMS_OUTPUT.PUT_LINE('Acaba de ingresar al cursor -->>> ');
DBMS_OUTPUT.PUT_LINE('Abre el Ciclo Mientras');
DBMS_OUTPUT.PUT_LINE('pl_id_tp_movimientos es '||pl_id_tp_movimientos );
DBMS_OUTPUT.PUT_LINE('pl_id_tp_movimiento es '||pl_id_tp_movimiento );
select min(FECHA_FACTURA)
, min(NUMERO_FACTURA)
into pl_fecha_factura, pl_numero_factura
from c_factura_aux
where estado = 1;
select id_tp_movimiento
into pl_id_tp_movimiento
from c_factura_aux
where numero_factura = pl_numero_factura;
--if (pl_id_tp_movimiento = '%COMPRA%') then
 if (pl_id_tp_movimiento = 4) then
select FECHA_FACTURA
, NUMERO_FACTURA
, ID_TP_MOVIMIENTO
, ID_PRODUCTO
, CANTIDAD -- cantidad
, VLR_UNITARIO -- vlr unitario
, (CANTIDAD * VLR_UNITARIO) -- vlr total
INTO pl_fecha_factura
, pl_numero_factura
, pl_id_tp_movimiento
, pl_id_producto
, pl_cantidad
, pl_vlr_unitario
, pl_vlr_variable
from c_factura_aux
where NUMERO_FACTURA = pl_numero_factura
and Estado = 1;
select cantidad, vlr_unitario
into pl_cantidad, pl_vlr_unitario
from c_factura_aux
where estado = 1
and numero_factura = pl_numero_factura;
update c_factura_aux set estado = 0
where numero_factura = pl_numero_factura;
pl_cant_aux := pl_cantidad+pl_cant_aux;
pl_vlr_variable := pl_vlr_peps+pl_vlr_variable;
DBMS_OUTPUT.PUT_LINE('apenas se va insertar la informacion -->>> ');
insert into c_inventario_final(FECHA_FACTURA, ID_TIPO_MOVIMIENTO,
VLR_UNITARIO, E_CANTIDAD_PRODUCTO, E_VLR_FACTURA, S_CANTIDAD_PRODUCTO,
S_VLR_FACTURA, IF_CANTIDAD, IF_VLR, ESTADO_FACTURA) values (pl_fecha_factura,
pl_numero_factura, pl_id_tp_movimiento, pl_id_producto, pl_cantidad,
pl_vlr_unitario, pl_vlr_variable, pl_cant_aux, pl_vlr_variable, 1);
cont := cont+1;
DBMS_OUTPUT.PUT_LINE('numero de vuelta va en --> ' ||cont);
end if;
end loop;
close compras;
--end if;
--end if;
exception
when others then
dbms_output.put_line(sqlerrm);
DBMS_OUTPUT.PUT_LINE('hay error, Corregir...');
--> PROCEDIMIENTO DE GENERACION MEOTDOS DE INVENTARIO...
end;
I appreciate your attention and cooperation extended ...
Martinez Salazar Reynel ...
good day ...

It looks like you are asking why your procedure never entered WHILE loop. If so, the answer woud be as follows:
select id_tp_movimiento
from c_factura_aux
where estado = 1
and fecha_Factura = (select min(fecha_factura)
from c_factura_aux
where estado = 1);does not return any rows. Try executing the above SQL and make sure table c_factura_aux has rows with estado = 1 and at least one of these rows has NOT NULL fecha_factura.
SY.

I seem to not enter the correct answers to my security questions for itunes to buy an in-app purchase and also cannot answer the questions exactly like i answered them when creating the account for my ipod, how do i find out what answers i put

I seem to not enter the correct answers to my security questions for itunes to buy an in-app purchase and also cannot answer the questions exactly like i answered them when creating the account for my ipod, how do i find out what answers i put for my ipod touch and itunes?

Try these previous discusssions:
recover answers to security questions: Apple Support Communities
how do i change apple ID security...: Apple Support Communities

When ı update firefox 7 to 8 I can not enter the facebook site, when I try it, it says Uyumsuz bir internet tarayıcısı kullanıyorsun. ( it means in english : you are using an unsuportted web browser) how I can solve this problem?

when ı update firefox 7 to 8 I can not enter the facebook site, when I try it, it says Uyumsuz bir internet tarayıcısı kullanıyorsun. ( it means in english : you are using an unsuportted web browser) how I can solve this problem?

Step by step, how did you arrive at seeing this agreement?

In visual studio 2012 coded Ui test is not entering the URL

Hi,
When i try to run the recorded script it is opening the new tab but it is not entering the new URL in to tab. It is showing test has failed due to some stack trace error. I am new to coded UI test am learning it. Is it timing error i need to place some sleep
time in between them?
Thanks
Prasanth
Prasanth

Hi Prasanth,
Generally, the coded UI test is used to verify that the whole application, including its user interface, is functioning correctly. Coded UI Tests are particularly useful where there is validation or other logic in the user interface, for example in a web
page. They are also frequently used to automate an existing manual test.
In other words, we can use coded UI test to verify the UI control instead of verifying the URL.
For more information:
http://msdn.microsoft.com/en-us/library/dd286726(v=vs.110).aspx
However, if you want to record script it is opening the new tab and then entering the new URL in to tab, I suggest you can use the Web Performance test to record and verify the request works correctly.
Reference:
Walkthrough: Recording and Running a Web Performance Test
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Why not enter the Flash Media Playback setup website?

Why not enter the Flash Media Playback setup website？
My Live & Vod Flash Service can't run.
Is Flash Media Playback termination of services?

How to access the page ??
Flash Media Playback Setup page
To copy the embed code, visit the Flash Media Playback Setup page at osmf.org/configurator/fmp/. The Flash Media Playback Setup page (see Figure 2) contains two main sections on the left and the right. Use the form on the left to enter the values for your video: video source location and various custom settings. The right side of the page contains a preview player and the preview embed code. Enter the values and then click Preview to generate the proper embed code.
I tried the above link and it takes me to the blogs.adobe.com .
Pls advice

Why my iphone screen can not open the key and can not enter the menu

why my iphone screen can not open the key and can not enter the menu

Your issue is not clear - are you saying your phone is disabled and/or you forgot the passcode?
http://support.apple.com/kb/ht1212

I can not enter the crs administration lost the password.

I can not enter the crs administration lost the password.
How could retrieve the password to enter the administration interface crs?
Please help me,
Natalia

For versions prior to version 8, there is a procedure to do this. You'll find the details documented in this thread:
https://supportforums.cisco.com/message/3196728#3196728

GT70 not enter the bios

My GT70 starts normally but not enter the bios when it starts down the DEL key gets black screen and not out of it, neither can change the boot by F11, gets black screen also,
Have some way of doing the bios update for windows 81

Hello
My laptop is a MSI GT70 GT70 Dominator Dragon Edition 22PC-1886
MY PROBLEM AND NOT ENTERING THE NOTEBOOK BIOS, AND CAN NOT BOOT SELECT, DO NOT BOOT BY USB.
NEED BIOS UPDATE FOR RETURN TO WORK
The NOTEBOOK WAS PURCHASED IN THE DAY 10.14.2014 IN USA, BUT TODAY I'M IN BRAZIL

TS1292 I am having trouble with my iTunes Gift card code. It says I have not entered the code correctly when I have-repeatedly. How can I redeem my iTunes voucher?

I am having trouble with my iTunes Gift card code. It says I have not entered the code correctly when I have…repeatedly. How can I redeem my iTunes voucher?

If the card was issued in the same country as you and your account are based and the page that you posted from doesn't help, then you will need to try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

When adjusting the date of a photo I can not enter the year

When in I photo , and I need to adjust the date of the photo that I have scanned in, I go to that drop down menu and try to enter the year but can not do so.

I go to that drop down menu
Which menu would that be? Have you tried the Photos ➙ Batch Change ➙ Date menu option? That menu option should add the Image Capture date to the EXIF data for the photo.
OT

I now have two user names showing at times. I did not enter the second one. What does this mean and how do I delete the unwanted one?

I don't have any details. It just showed up.

Use these steps to remove saved (form) data from a drop-down list:
#click the (empty) input field on the web page to open the drop-down list
#highlight an entry in the drop-down list with the mouse or cursor Down key do not click the mouse or press the Enter key
#press the Delete key (on Mac: Shift+Delete) to delete the highlighted entry
*http://kb.mozillazine.org/Deleting_autocomplete_entries

Re:How can we save the data without enter the mandatory fields

Hi all,
I am using Jdev11.1.2.3.0
Suppose you have a form that consists of inputTexts and some of them are required (required = true). These come from a data control
What my customer wants is two buttons: one submit button, and one save button.
The submit button behaves normally: when a required field is not entered, a validation error is shown.
The save button on the other hand, will perform a model update without complaining, even though some required fields could be empty. This would be the Save operation . the values that the user entered are saved in draf mode., but the process does not continue. It's like saving a draft version of the fields you entered, so you can continue filling in the form for example the next day.
How can i start this scenario.
How can I achieve this? can anyone help me out please.
Thanks,
G.Shilpa

Duplicate of https://forums.oracle.com/thread/2596520
Please don't post question multiple times!
Timo

Data not displaying the report (Help me out Urgent)

Hi Folks,
When i am executing the query and web reports for the date 27/11/2007 & 28/11/2007 am not getting the data its saying "No applicable data found"
But i can see the data in the ODS for those dates.
Report is working fine till 26/11/2007.
But when the user is trying to check the reports for the above mentioned dates its not displaying.
Even in checked it the RSRT as well but the same case over there the data is not displaying.
Its bit urgent as its month end user wants to see the reports.
Any help or any clue will be great helpfull and appreciated.
Urs,
RK
*****Points Committed

HI Suchitra,
First check out how many records are there in the ODS as on 27th and 28th
There are totally 750 & 427 records on 27th and 28th.
At the time of executing the query,are using giving any variable entries?
Yes we are using variables entires like PO Date & PO number we usually check the reports giving the date in PO Date variable,
Any other clue please?
Urs,
RK.

Data not entering the BPM

Similar Messages

Maybe you are looking for