Data not Pulling after adding a 2nd Hierarchy in Account Dimension

Hi all. We had 2 hierarchies in our account dimension. We were having some performance issues, so I wanted to test reporting performance by deleting the 2nd hierarchy. I deleted the second one and now I am ready to add it back again, but I am having the toughest time. After I added the 2nd hierarchy no data is pulling through any report and I am getting evdre errors. I checked sql db and the data is there. And then if I take out the 2nd hierarchy the reports work fine. I added multiple hierarchies to dimensions before , so I am quite baffled on why this is happening.
Here's what I did. Deleted column PARENTH2 and FORMULAH2. Process. Then did some testing. And now Added columns Parenth2 and formulah2. Process.
Am I missing something here? Any suggestion will be greatly appreciated.
We have SQL 2008 Enterprise sp2 CU3. BPC 7.5 MS SP3 patch5.

I apologize for this very late response.
Thanks for your response. Yes I did process the dimension, modify dimension property and modify-->Process Application. And the second hierarchy was visible when I logged back into the application.
John, yes the second hierarchy was visible in SSAS.
This was why it was baffling to me!
So after a whole day of trying to figure this out, I sort of gave up and started working on something else. And because it was our test environment, it didnt have any effect on the users. One day later I logged back in and it was working! I took out the second hierarchy again and added it back. Processed, modified etc. I got the same result. I couldnt pull any data from the second hierarchy. I logged out, logged back in the day after and it started working. So, basically it seemed like the system needed some time (12-16 hours in this case) to adjust? I really don't know how/why this happened, maybe someone have an explanation for this?
Thank you all.

Similar Messages

Autocomplete does not work after adding controller to LOV

Hi experts ,
Autocomplete does not work after adding controller to LOV Region, i have checked the fnd_compatialbe mode it is fine.validation proprty is also false, stilll it is not working.
can anyone help me its very urgent
regards
vamsi

Hi Tapash,
This resolved the problem. Many thanks for your help with this it has been driving me mad for the last few days.
I could not understand why the standard Apps LOV regions had controller's attached to them and the autocomplete would function but with my pages it would not.
I actually raised a TAR about this and got nothing back so have updated it with the resolution.
Thanks again.
Regards,
David

Expiration date not displaying after upgrade from 2007 to 2013

I recently upgraded from MOSS 2007 to 2013. I have information management set up on a library of InfoPath forms. For the forms that were created prior to the upgrade, the expiration date is displaying and actually get updated if I modify them.
But none of my forms that have been created after the upgrade, are displaying when the expiration date is, which should be one year from modify date. If I modify the forms created prior to the upgrade, they reflect the new, update date.
Are these new forms not getting the policy applied to them, and why not? I am not sure why the older forms are getting updated, but not my new ones.
Denise E.

Hi Denise,
According to your description, my understanding is that the Expiration date column was not displaying values after upgrading from SharePoint 2007 to SharePoint 2013.
Per my knowledge, we can only use the date column which is added to the library or list or the Declared Recorded date to set the retention policy, so if the Expiration date is used in the retention policy then the Expiration date should be a column in the
library or list.
I recommend to check the retention policy in the library and see which column is used in the retention policy as the image below shows:
After that, go to the Library settings to find this column.
Could you please provide screenshots of the retention policy and the columns in the Library settings page?
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Data not populating after DS enhancement

HI pros,
i have made Data source enhancement.
i wrote the code in include program.
when '0FI_GL_40'.
CHECK NOT c_t_data[] IS INITIAL.
LOOP AT c_t_data ASSIGNING <fs_data5>.
SELECT SINGLE matnr FROM bseg INTO <fs_data5>-ZZMATNR
                         where BUKRS eq <fs_data5>-BUKRS and
                               BELNR eq <fs_data5>-BELNR and
                               GJAHR eq <fs_data5>-GJAHR and
                               BUZEI eq <fs_data5>-BUZEI.
endloop.
but the data not populating into the report, the Multi provider is real time
krish..

Hi,
Syntax
ASSIGN mem_area TO <fs> casting_spec range_spec.
Effect
This statement assigns the memory area specified using mem_area to the field symbol <fs>. You can assign a data object or a memory area calculated from the address of a data object. After the assignment, the field symbol refers to the assigned memory area and can be used in operand positions. When used in a statement, it behaves like a dereferenced data reference, meaning that the statement works with the content of the memory area.
The data type with which the assgigned memory area is treated, depends on the specifications in casting_spec. You can either execute an explicit casting or the field symbol takes on the data type of the data object specified in the assignment. A field symbol to which a memory area is assigned, has this data type after the assignment and behaves like a data object of this type.
The assigned memory area mem_area must be at least as long as the data type specified in casting_spec and must have the same alignment. If the data type determined in casting_spec is deep, the deep components with their type and position must appear in the assigned memory area exactly like this.
Use the specifications in range_spec to restrict the memory area that can be assigned to the field symbol.
You have to assign it back to internal table to modify the content.
Check in debug mode if you have still doubt.
regards,
Raju

Iphone 4s Cellular data not working after updating to ios 6.0 .

How to fix my cellular data, is not working after updating to IOS 6.0 ?

Hey my wifi quit about a month ago, and im running 5.1.1. I thought the fix would be to download 6.0, I guess not
I have a 4s, first it was charging problems now this...argh!

Opportunities with Products not pulling after recent patch

I have multiple opportunities with products and costs associated with them that are not pulling when I run a historical report.
For example:
I run a report on Thursday at 2:00 PM. I have a user who has modified an opportunity on Thursday morning. I understand my historical report pulls everything from the previous day (Wednesday) and prior. However, they only changed the closing date on the opportunity. They did not change anything about the product. The product has had a quantity and cost associated to it since creation (9/2/10). Just because they changed the closing date this automatically rejects the opportunity from the historical report?
My report is supposed to pull every opportunity with associated products and costs. It seems to be neglecting anything that was modified on the day it is ran.
Also, I should mention that the reason I am running a historical report is because the real-time report seemed to be doing the same thing. It wasn't including opportunities with products clearly associated to it. These opportunities would be included in a "opportunity - no product" report.
Thank you

Check that the currencies are set on both the header and products. There is a note about this in the R18 notes.

QM Notification: task end dates not pulled through from response profile

Hello,
I am experiencing a problem with the end dates of the tasks in QM notifications not pulling through (from the response profile) when tasks are determined.
When I do the simulation of task determination, the gantt chart shows all the tasks together with the end dates. But when the actual determination is done these dates are not populated in the planned finish date fields.
I have double checked the configuration: priorities, response and service profiles are set up correctly. I have also searched SAP notes without success.
I thank you in advance for your responses.
Kind regards,
Theo.

Yes, I know, but as far as I understand binding the values back from rule to the workflow is something that doesn't work. I have never tried it, but I have seen posts here about people complaining that this kind of binding does not work.
Have you tried to bind for example some hard coded value back to the workflow (something that should definately work)? Does it work? If not, I suggest you to ask this from SAP that is it supposed to work and if not, why do they have this option to for binding from rule to workflow. Or then just forget what you are trying, and use some of the suggested workarounds.
Regards,
Karri

BEA WebLogic 8.1 server not booting after adding a security realm

Hi,
I have added my own security realm for BEA WebLogic Server 8.1.
However, when I try to boot the server using this realm, it simply hangs. I cannot
take thread dumps as the server java process does not respond to "kill -3 PID"
(after the server has hung).
When I looked at the server log file, I observed that the server had hung after
initializing the IIOP subsystem.
I have attached herewith the following 3 files:
1. config.xml (the server config file after adding entry for my security realm)
2. default_realm.log (the server log file when booted through the default realm)
3. netpoint_realm.log (the server log file when booted through my realm).
Is there any way, I can debug where the server is exactly hanging?
Thanks and Regards,
Abhinay
[BEA_Files.zip]

is it admin server or Managed server which isnot starting?
Mir

Delivery dates not affected after route determination

The dates found on the shipping tab in delivery header are not affected after a route determination.
In sales order, if route is changed, the dates are affected.
In delivery, the route is re-determined at delivery creation, but if route transit time is different the delivery dates are not affected. It retains the sales order dates.
Need system to change dates according to new route.
Where is this set?

Hi,
Transit Time and Transportation Lead time comes from Route while Pick/Pack time and Loading time comes from Shipping point.
May be in your case, while re-determination of route, just check if the time is enough to affect the date i.e. more than 24 hrs or so
Hope you got it what I intend to communicate
Regards
SD

Will not boot after adding RAM?

I just added another 512mb chip to my PB G4 upper slot. After adding the RAM, my PB will not boot/ load the OS. When I press the power button, the HD (i think) begins to run, but stops after about 2 seconds. I can't get it to do anything else. Please help.

Have you taken the new RAM stick out yet?
Powerbooks can pretty picky when it comes to RAM.
Joe

BUG: Search not avail after adding song to playlist (after creating folder for playlists) - iPad app

So this sounds like an unlikely bug, but I can duplicate it again and again.Starting point: Lots of playlists, no folders. I have the latest iOS version on my iPad and the latest Spotify update.Used PC client to create a folder and moved some playlists to that folder.Back on iPad, search for song and then add it to any playlist. (It doesn't matter which playlist, whether it's in a folder or not.)Here's where the problem occurs: After adding a song to a playlist, it is no longer possible to search for other songs. The search function simply fails to respond. I can listen to songs on playlists but can't use the search. If I want to search, I have to restart the app. Annoying!

If you have "Keep..." and "Copy..." unchecked, iTunes will simply reference the existing file, and will not change your file structure, as you correctly note.
I'm fairly sure that some other program is operating on your files. The "Playlists" folder that you mention has nothing to do with iTunes. On my PC, only Windows Media and Roxio use it.
To your question +"Is there a way to have iTunes rename/move files when adding to its library to specific folders via custom rules based on ID3 information (i.e. WMP rip settings)?"+ the answer is no. When iTunes rips a CD, it names the files as track number and title, with no option to do differently. And as far as placing the ripped files, they go in Artist/Album, with no option to do differently. As full-featured ripping programs go, iTunes is not even in the race.

Premiere Pro CS6 not responding after adding anything to timeline

I had been using Premiere CS6 successfully for a while, but starting a few months ago, it started not responding after I did anything. I can add a title and a transition succesfully to the timeline and it plays fine, but as soon as I add a picture or video clip, it immediately stops responding. It's frustrating because the program used to work fine before.
The only thing I can think of that might have affected it was when I upgraded to Mavericks, but I haven't read anything about any serious problems with Premiere running on Mavericks. I have a late 2008 MacBook Pro.
Thanks in advance for the help.

Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
mavericks
You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question
I am Windows so did not bookmark the messages, but I have seen SOME message threads with SOME solutions for SOME mavericks problems

Image not appearing after adding adjustment layer?

My image layer isn't showing after adding an adjustment layer. I'm trying to turn a JPG picture of a nuclear explosion into a 3D/Camera effect.
I've added one solid layer below the JPG which is just grey. The JPG is in the middle. The adjustment layer is on top, with Colorama Get phase/Add phase from alpha channel. Plus turbulnce display added.
Whats going on? Or am I meant to do something else to the JPG first?

I figured out what was wrong- it just didn't appear in the static preview, but it was fine when I clicked composition>Preview. Is this how it looks normally?
I was attempting to make a weird 3D spinning pictures of nuclear explosions and bombs which panned/zoomed in and out of the images.

Encounter error after adding an attribute to a new dimension in AWM.

After I added an attribute to a new dimension, I encountered the error as below.
I also cannot read the metadata from Jdeveloper after I create a cube using AWM.
Please kindly help!!
BI Beans Diagnostics(v1.0.2.0) 2005/9/15
===============================================================================
JDEV_ORACLE_HOME .......................... = C:\jdev1012_base
JAVA_HOME ................................. = c:\j2sdk1.4.2_02
JDeveloper version ........................ = 10.1.2.0.0.1811
BI Beans release description .............. = BI Beans 10.1.2 Production Release
BI Beans component number ................. = 10.1.2.52.0
BI Beans internal version ................. = 3.2.1.0.13
Connect to database ....................... = Successful
JDBC driver version ....................... = 10.1.0.3.0
JDBC JAR file location .................... = C:\jdev1012_base\jdbc\lib
Database version .......................... = 10.2.0.1.0
OLAP Catalog version ...................... = 10.2.0.1.0
OLAP AW Engine version .................... = 10.2.0.1.0
OLAP API Server version ................... = 10.2.0.1.0
BI Beans Catalog version .................. = N/A; not installed in BI_TEST
OLAP API JAR file version ................. = "10.1.0.2.0"
OLAP API JAR file location ................ = C:\jdev1012_base\jdev\lib\ext
Load OLAP API metadata .................... = Successful
java.lang.NullPointerException
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.setDimAttributes(MDMMetadataDriverImpl_92.java:1733)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.getChildren(MDMMetadataDriverImpl_92.java:197)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.addChildren(MDMMetadataDriverImpl_92.java:2687)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.fillOlapObjectModel(MDMMetadataDriverImpl_92.java:2571)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92$LoadOlapObjectModel.run(MDMMetadataDriverImpl_92.java:3013)

I would post this on the OLAP forum as they should be able to help you diagnose this problem. The OLAP forum can be found at the following link:
OLAP
There is not much detail in your log, but I suspect that your OLAP mappings are incomplete or the maintenance of your dimension to load the new attribute data somehow failed. I would check the OLAP AWM build logs for more information.
Thanks
Keith
Oracle Business Intelligence Product Management
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Beans http://www.oracle.com/technology/products/bib/index.html
Discoverer: http://www.oracle.com/technology/products/discoverer/
BI Software: http://www.oracle.com/technology/software/products/ias/devuse.html
Documentation: http://www.oracle.com/technology/documentation/appserver1012.html
BI Samples: http://www.oracle.com/technology/products/bi/samples/
Blog: http://oraclebi.blogspot.com/

Hierarchy Data not saved after Hierarchy Load

Hi Gurus,
I am facing a problem with the hierarchy data load in SAP BPC NW 7.5 SP06. I have already used /CPMB/IMPORT_IOBJ_MASTER & /CPMB/IMPORT_IOBJ_HIER once to load the data from BI to BPC and it worked fine that time.
Now I have made some changes in the Hierarchy at the BI side. When I run the package link list, the /CPMB/IMPORT_IOBJ_MASTER chain runs fine and the master data, description for Attribute and Hierarchies are loaded perfectly. But whn the /CPMB/IMPORT_IOBJ_HIER is run, the changes are not saved in the BPC Member sheet. I have manually make the changes in the member sheet and Process the Dimension.
Can we process the Dimension explicitly after the Hierarchy load again?
Does anyone have an idea about this?
Any help is appreciated.
Thanks,
Abhishek

Abhishek,
Double check whether /CPMB/IMPORT_IOBJ_MASTER is bringing all the ID's,Texts and Hierarchy Nodes. If required drop the data from dimesion member sheet and load it again.
Double check the Hierarchy and level setup while running /CPMB/IMPORT_IOBJ_HIER.
(when we are in SP05, it was not bringing the multiple Hierarchies, now we are in SP07 loading multiple hierarchies but not the TEXT fo the Id's some inconsistency)
Thanks

Data not Pulling after adding a 2nd Hierarchy in Account Dimension

Similar Messages

Maybe you are looking for