Data protection and Security

Hi, I recently went through the exercise of setting up some programs to protect myself online on public wifi as well as protect my on-computer data. Since I didn't find any post on this topic, thought I'd share what I learnt.  I have a Lenovo X120e but this should apply to any laptop user. I activated 4 things:
1. Registered my x120e at http://preyproject.com. This is a free service. In case your laptop is stolen you can login there from somewhere else and set your laptop to 'missing' and activate alarms, messages, data wipe-out etc.
2. Subscribed to Hotspot Shield Elite. When you connect to a public wifi (starbucks, airport), it converts it to a VPN. Your IP address is also temporarily changed, so you can't be hacked into.
3. Installed Folder Lock - great for protecting valuable files on the computer. Encrypt/lock/hide them. There is a one time cost to this sw.
4. Installed KeyPass password manager. Excellent Open Source sw. Free. 
I am sure there are other excellent programs out there than you can use instead of these, but these seem to be the ones currently highly rated. And for a net $50+ and some installation effort, the safety and peace of mind is definitely worth it.
Cheers!

Adding another point:
5. Install "USB Port Locked" - currently v4.0. Freeware. Blocks your usb ports from accepting any flash (data) drive. Non data devices will continue to work irrespective of whether USB Port lock has been activated or not. You can unlock with a password..

Similar Messages

  • SQL Server data change and Security

    in our environ any user who login with sa they can change any table data.
    so i write trigger to capture changed data like who change, from which IP etc this
    CREATE TRIGGER [TRG_Users]
    ON [dbo].[UserRights] AFTER INSERT, UPDATE, DELETE
    AS
    DECLARE @strIP VARCHAR(MAX)
    SET @strIP=(SELECT dbo.GetCurrentIP())
    IF EXISTS (SELECT * FROM INSERTED) AND EXISTS (SELECT * FROM DELETED)
    --PRINT 'Update happened';
    INSERT INTO Logger(IPAddress,Status)
    VALUES (@strIP,'UPDATE')
    ELSE
    IF EXISTS (SELECT * FROM INSERTED)
    --PRINT 'Insert happened';
    INSERT INTO Logger(IPAddress,Status)
    VALUES (@strIP,'INSERT')
    ELSE
    --PRINT 'Delete happened';
    INSERT INTO Logger(IPAddress,Status)
    VALUES (@strIP,'DELETE')
    CREATE FUNCTION [dbo].[GetCurrentIP] ()
    RETURNS varchar(255)
    AS
    BEGIN
    DECLARE @IP_Address varchar(255);
    SELECT @IP_Address = client_net_address
    FROM sys.dm_exec_connections
    WHERE Session_id = @@SPID;
    Return @IP_Address;
    END
    but the problem is user can change data after disabling the trigger on specific table. so trigger will not fire and user can seamlessly change data.
    so guide me what is the best way to capture data change and log them. so no one can bypass the security. please do not tell me disable sa account because i am looking for different approach to capture the change data. is there any secure way exist in sql
    server 2005/2008 if yes then please discuss here. thanks

    If you have shared SA password with different users you are bound to get these scenarios.Instaed of focussing on how to capture I would like you to talk with different users and only provide them access which is required.Follow policy f minimum privilege
    your environement will be less complex .
    You can use combination of Logon trigger and CDC to capture it.But again why o make things complex by sharing SA password with many users.
    https://www.simple-talk.com/sql/learn-sql-server/introduction-to-change-data-capture-%28cdc%29-in-sql-server-2008/
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Data Protection and Privacy – a must in every organization

    Customer data is vital to any organization. We were recently faced with a security breach causing us to rethink our security strategies that were currently being used. Our CEO suggested that we use EDMS systems that cater to regulatory mandates as well as security cover for vital enterprise data. Implementing a [data privacy|http://www.solix.com/data_privacy_oracle_ebusiness_suite.htm] system from Solix Technologies has made a large difference in the way customer data is treated and protected.

    No spam please.

  • Blackberry Protect and Security Wipe

    Hi! If you would like to turn off your BlackBerry Anti-theft on your device you can simply go to your Settings → BlackBerry AntiTheft and simply disable it from there. But if your device is running 10.3.2 OS then you will be asked to enter your BlackBerry ID credentials. Just enter your BlackBerry ID username and password and it will be disabled. Then to perform security wipe, I suggest back up your device first before doing so. Then when you have everything backed up go to Settings → Security and Privacy → Security Wipe It may take some time to wipe your device and expect that it needs more than 30% battery level to continue. So keep your battery charged and wait for the wipe to be completed. You may also see that your device will turn off and on a few times while performing security wipe. NOTE:To find what OS you're currently running, go to Settings → About → Tap Category → Select OS on the drop down list and check current OS. 10.3.2 OS update is very tight in security specially when your BlackBerry Anti-theft is turned on. When you perform a Security wipe, you will need to verify your BlackBerry ID credentials. Then you must enter your BlackBerry ID credentials again after security wipe. If you fail to enter your BlackBerry ID, then your device is forever locked out. This is the reason why I always advise to have t he Anti-theft turned off first. Good luck!

    Hello,
    If you are on 10.3.1 or earlier, there is no requirement to turn off Protect before a WIPE...the WIPE will remove the association between your BB device and all BB proprietary services, including Protect.
    However, if you are on 10.3.2, then indeed you need to first turn off Protect before you initiate the WIPE. Refer:Article ID: KB36737 BlackBerry Protect Anti-theft ProtectionGood luck!

  • Difference between oracle Data Guard and Replication

    Hello Friends,
    I would like to know the main difference between oracle replication and data guard. Theoretically both are same then where is the difference. Can replication or dataguard be configured in a single PC.
    Thanks

    Dataguard :
    Oracle Data Guard is primarily for high availability, data protection, and disaster recovery. An Oracle Data Guard Standby instance provides transactionally consistent copies of the production database, in the event of an unplanned outage or instance maintenance the Data Guard Primary Role Standby Role can be switched so the Standby instance can provide Production services.
    Replication :
    Oracle Advanced Replication and Oracle Streams are Oracle's solution for replicating data and internal structures to remote databases. Advanced Replication is primarily trigger based where Streams is a rule/handler based replication process and considerably more efficient and less error prone than Advanced Replication
    refer,
    http://www.xtivia.com/database-management/replication/oracle-replication
    Thanks

  • What's the difference between data guard and replication?

    Thanks.

    Replication is the process of copying and maintaining database objects, such as tables, in multiple databases that make up a distributed database system. Changes applied at one site are captured and stored locally before being forwarded and applied at each of the remote locations.
    Data Guard provides an extensive set of data protection and disaster recovery features to help you to survive disasters, human errors, and corruptions that can incapacitate a database.
    For more information on Replication refer to http://otn.oracle.com/docs/products/oracle9i/doc_library/release2/server.920/a96567/toc.htm
    For more information on Data Guard refer to http://otn.oracle.com/docs/products/oracle9i/doc_library/release2/server.920/a96653/toc.htm
    Hope this helps.
    Sujatha.

  • Mailboxfolderrecovery with Exchange Native Data Protection

    Hi,
    I`m currently facing an issue with deleted mailboxfolders in combination with exchange native data protection and hope some of you can bring up some advice on resolving this issue.
    The situation:
    Im using native data protection without traditional backup. I now have the issue, that I cant restore a mailbox to a specific moment time. When a folder is deleted all emails are moved to the dumpster, where I store them for 1 year. Apperently the
    sourcefolderinformation is not stored, which makes it pretty difficult to restore complete folderstructures, when you dont exactly know which mails were stored in which folder (but who knows that :D)
    Especialy shared mailboxes will suffer from this issue. When a delegate moves folders to another mailbox, there will not be any clue what the mailbox looked like. 
    Did anyone of you has/had the same issue and are there any suggestions to resolve this?
    Kind regards,
    Philip

    DJ is absolutely correct and it has to do with the Dumpster 2.0 architecture.  Major pain for sure :-(
    Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
    2007 --> 2010 --> 2013 with Lucid8's
    DigiScope

  • Error loading Virtual Machine Manager 2012 and Data Protection Manager 2012 modules together

    Hi.
    Very strange issue: when i try to load together Virtual Machine Manager 2012 and Data Protection Manager 2012 modules - script fails. If first loaded Virtual Machine Manager 2012 module:
    Import-Module : Cannot load Windows PowerShell snap-in C:\Program Files\Microsoft Data Protection Manager\DPM2012\bin\ObjectModelCmdlet.dll because of the following error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property
    for more information.
    Loader Exceptions:
    Could not load type 'Microsoft.Internal.EnterpriseStorage.Dls.Utils.AlertTypes.AlertEnum' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    At C:\Program Files\Microsoft Data Protection Manager\DPM2012\bin\Modules\DataProtectionManager\DataProtectionManager.psm1:2 char:14
    + Import-Module <<<<  (Join-Path $cmdletDllPath ObjectModelCmdlet.dll)
        + CategoryInfo          : ResourceUnavailable: (:) [Import-Module], PSSnapInException
        + FullyQualifiedErrorId : PSSnapInLoadFailure,Microsoft.PowerShell.Commands.ImportModuleCommand
    If first loaded DPM 2012 module::
    Import-Module : Cannot load Windows PowerShell snap-in C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\Microsoft.SystemCenter.VirtualMachineManager.dll because of the following error: Unable to load one or more of the requested
    types. Retrieve the LoaderExceptions property for more information.
    Loader Exceptions:
    Could not load type 'Microsoft.VirtualManager.Utils.TypeConverterEnumHelper`1' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.TypeConverterEnumHelper`1' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineException' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Method 'get_BootOrder' in type 'Microsoft.SystemCenter.VirtualMachineManager.ClientObjectHWSettingsSourceAdapter' from assembly 'Microsoft.SystemCenter.VirtualMachineManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' does not have
    an implementation.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Method 'get_BootOrder' in type 'HardwareConfigSettingsAdapter' from assembly 'Microsoft.SystemCenter.VirtualMachineManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' does not have an implementation.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMSCSIControllerType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMSCSIControllerType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.ServicingTypeValues' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.FabricCapabilityType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.SKUType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral,PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    At \\team\dfs\scripts\Admin\Scvmm\Move-VirtualMachine.ps1:103 char:16
    +         Import-Module <<<<  'C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\psModules\virt
    ualmachinemanager\virtualmachinemanager.psd1';
        + CategoryInfo          : ResourceUnavailable: (:) [Import-Module], PSSnapInException
        + FullyQualifiedErrorId : PSSnapInLoadFailure,Microsoft.PowerShell.Commands.ImportModuleCommand

    Vote if you have same problem:
    https://connect.microsoft.com/PowerShell/feedback/details/873348/scvmm-and-scdpm-powershell-modules-cant-work-together

  • When I start iTunes on my home computer (Not a MAC), it automatically shuts down, and gives me the message that the Data Execution Prevention security feature has shut it down...what to do?

    When I start iTunes on my home computer (Not a MAC), it automatically shuts down, and gives me the message that the Data Execution Prevention security feature has shut it down...what to do?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Have not purchased music for 10 months, in the meantime card has expired, which has £1.74 in credit on it, tried to change card details to current last 4 numbers/expiry date and security code but keeps on rejecting and brings back old card details

    Have not purchased music for 10 months, in the meantime card has expired, which has £1.74 in credit on it, tried to change card details to current last 4 numbers/expiry date and security code but keeps on rejecting and brings back old card details

    Try here >  iTunes Store: My credit card's security code or zip code does not match my bank's records

  • 2 New Free Elearning Courses – vSphere Data Protection Advanced and IT Business Management

    We’ve added two more elearning courses to the extensive libraryof free VMware training classes.
    vSphere Data Protection Advanced [V5.8] Fundamentals - provides information about the vSphere Data Protection Advanced backup and recovery solution for virtual machines and describes the technologies it uses.
    IT Business Management [V1.1] Fundamentals - analyzes the VMware ITBM Standard Edition solution, describes the installation and configuration of ITBM Standard Edition, and describes how ITBM Standard Edition can be used to visualize and manage cloud costs.

    We’ve added two more elearning courses to the extensive libraryof free VMware training classes.
    vSphere Data Protection Advanced [V5.8] Fundamentals - provides information about the vSphere Data Protection Advanced backup and recovery solution for virtual machines and describes the technologies it uses.
    IT Business Management [V1.1] Fundamentals - analyzes the VMware ITBM Standard Edition solution, describes the installation and configuration of ITBM Standard Edition, and describes how ITBM Standard Edition can be used to visualize and manage cloud costs.

  • Cisco IPS Tech Tips: Data Center Protections and Platforms

    Hello Cisco Community Forum Members;
    Robert Albach invites you to attend a 30-45 minute Web seminar on the Cisco   IPS internal operations using WebEx. This event requires registration.
    Topic: Cisco IPS Tech Tips - Data Center Protections and Platforms
    Host: Robert Albach
    Date and Time:
    Thursday, July 19, 2012 10:00 am, Central Daylight Time (Chicago, GMT-05:00)
    To register for the online event
    1. Go to https://cisco.webex.com/ciscosales/onstage/g.php?d=206048546&t=a&EA=ralbach%40cisco.com&ET=ade69a0aa29f279471b6a85feae46a71&ETR=5b39cf5f535442c1763f090845d7ddd3&RT=MiM3&p
    2. Click "Register".
    3. On the registration form, enter your information and then click   "Submit".
    Once the host approves your registration, you will receive a confirmation   email message with instructions on how to join the event.
    For assistance
    http://www.webex.com
    IMPORTANT NOTICE: This WebEx service includes a feature that allows audio and   any documents and other materials exchanged or viewed during the session to   be recorded. By joining this session, you automatically consent to such   recordings. If you do not consent to the recording, discuss your concerns   with the meeting host prior to the start of the recording or do not join the   session. Please note that any such recordings may be subject to discovery in   the event of litigation.

    The recordings and the presentation slides are placed here on the Cisco Support Community. I think if you roll the threads back some you will see the prior month's Tech Tips (then called Tech Talks) posted.
    This one will be posted a few days after the event.
    -Robert

  • Do data modeler support ORACLE Secure Data Masking and Subsetting ?

    How to use the security(Contains PII, Masking Type, ...) in conjunction with ORACLE Secure Data Masking and Subsetting. Is it possible to generate masking definitions for ORACLE Data Masking ?

    Hi Philip,
    it's a XML-format an looks like:
    <?xml version="1.0"?>
    -<MASKING_DEFINITION PROD_VER="10.2.0.4.4" META_VER="1.0">
    <DEFINITION_NAME>MASKING_DEF_1</DEFINITION_NAME>
    <TARGET_NAME>orcl</TARGET_NAME>
    <TARGET_TYPE>oracle_database</TARGET_TYPE>
    <ADV_OPTION_DISABLE_LOGS>Y</ADV_OPTION_DISABLE_LOGS>
    <ADV_OPTION_REFRESH_STATS>Y</ADV_OPTION_REFRESH_STATS>
    <ADV_OPTION_DROP_TEMP_TABLES>Y</ADV_OPTION_DROP_TEMP_TABLES>
    <PARALLEL_DEGREE>DEFAULT</PARALLEL_DEGREE>
    <DM_FLAGS>15</DM_FLAGS>
    MASKING_COLUMN>
    <OWNER>OWNER</OWNER>
    <TABLE>TABLE</TABLE>
    <COLUMN>COLUMN</COLUMN>
    <COLUMN_GROUP/> <FORMATS> <FORMAT> <RULE_ORDER>1</RULE_ORDER> -<RULE_CONDITION>
    <![CDATA[ 1=1 ]]>
    </RULE_CONDITION> -<FORMAT_ENTRY> <ORDER>1</ORDER> <TYPE>RS</TYPE> <START>1</START> <END>40</END> </FORMAT_ENTRY> </FORMAT> </FORMATS>
    </MASKING_COLUMN>
    </MASKING_DEFINITION>
    This is a example from my local 11 g database control on our OEM 12 c it starts with:
    MASKING_DEFINITION PROD_VER="12.1.0.4.0" META_VER="1.0">
    Perfect would be if we can choose the type of masking "Redaction/Data Masking" in the preferences and the properties of "Masking Type" and "Mask Template" properties would match the choosed type of masking.(i assume they can be found somewhere in the SYSTEM data dictionary)
    Besides the present properties there exists many others for "Data Masking Pack" like Start/End, ...
    Complete support of Data Masking Pack over Data Modeler would be great, OEM is more a dba tool and on our site definition of security is a product-owner/designer responsibility.
    Regards Günter

  • HP Protect Tools Security Manager and Windows 7

    I need assistances for my HP ProBook 4440s. There is no HP Protect tools security manager in installed in the system.I also want to install  figer print security system.Kindly assist where necessary,
    Thanks,
    k.dineysh

    You need to contact HP Technical Support since the fingerprint reader is part of their hardware configuration and HP would be the source for support of the fingerprint reader.
    The HP Support website is found @
    http://www8.hp.com/us/en/contact-hp/contact.html
    There is also an HP Consumer Support forum @
    http://h30434.www3.hp.com/psg/
    There is even a dedicated thread for your problem found @
    http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/HP-Probook-4530s-fingerprint-reader-not-working/m-p/1372895#M40259
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • HT1918 revised credit card expiry date not updating on my account, warning box says card has expired even after i change the details and security code. anyone know how to correct this?

    has anyone experienced this i want to update my card details on my account but it says card expired even when i put in the new expiry date and security codes.

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    Then edit your payment details.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings. Then try again.
    iTunes Store: Changing account information
    iTunes Store: Accepted forms of payment

Maybe you are looking for

  • Loss of photos due to error message - need to recover

    After downloading some photos on holiday and refining them in iphoto, I received an error message saying it was shutting down. On restarting I noticed a number of events empty based on work I had just completed within them. As I am travelling have ha

  • Photoshop CC does not see the full RAM

    I just installed Photoshop CC and I see in the performace that it only sees 3255 MB.  But I have 32G RAM on my PC and Photoshop CS6 sees the full 32G of RAM.  How can I solve this?

  • IOS7 causing phone freeze/full crash

    Installed iOS7 today off my iPhone's settings. Once it finished, I have my phone constantly freezing after only 2 minutes of use, ultimately to slowly shut the screen off by pressing the lock button. The phone won't turn back on unless pressing both

  • Trying to update an iPod touch to IOS 6. Downloaded upgrade

    I tried to update my son's iPod Touch to IOS 6. Downloaded the software but kept getting an error message when I tried to update. Now iTune indicates that the device needs to be restored but it times out with an error message that it cannot be restor

  • Flex Remoting - Deeply Nested ArrayCollections not Stongly Typed

    I have a Flex 3 app which uses remoting. All works relatively well except for the following... I have a deeply nested object graph as follows: ( btw: each VO uses [RemoteClass(alias="com.mypackage.xxx")] meta tags ) The main class is called "BrandVO"