Data Quality Runtime Error

Hi all,
Not sure if this is the right place but it seems the closest.
I have installed Oracle Data Quality on a Windows 7 64-bit machine but every time I try to run the Profiler I get a C++ runtime error which when dismissed reveals an ODQ alert box that says a ReadProcessMemory or WriteProcessMemory did not complete.
I installed the Linux version fine on VirtualBox (same machine 64-bit) but wanted to put this on my Windows Host so I could use the client.
Has anyone encountered similar or does anyone have any ideas? I do not know where to start. Have tried a reinstall from a fresh download but get the same problem. The Metabase Server Admin tool works OK.
Happy to supply any other info.
If there's an ODQ forum please let me know and I will move.
Thanks
Dan

Change the compatibility mode to windows XP service pack 2. I have this installed on a windows 2008 64bit server had to do that in order to get the metabase admin and the control center to work.

Similar Messages

  • Data Quality Report Error

    In DS 12.1.1.0,
    when I try to open a Data Quality Report in the Management Console I get a new Windows with the following error message:
    Fehler
    Fehler bei der Seitenformatierung: FormulaFunction hat eine unerwartete Ausnahme von der 'evaluate'-Methode ausgelöst. 
    Tomcat log stdout says:
    19-05-09 10:58:59:708 - {ERROR} sdk.JRCCommunicationAdapter Thread [http-28080-Processor24];  JRCAgent5 detected an exception: Fehler bei der Seitenformatierung: FormulaFunction hat eine unerwartete Ausnahme von der 'evaluate'-Methode ausgelöst.
         at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
         at com.businessobjects.reports.sdk.b.i.byte(Unknown Source)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.getPage(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.getPage(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.getPage(Unknown Source)
         at com.crystaldecisions.report.web.event.ac.a(Unknown Source)
         at com.crystaldecisions.report.web.event.ac.a(Unknown Source)
         at com.crystaldecisions.report.web.event.b2.a(Unknown Source)
         at com.crystaldecisions.report.web.event.b7.broadcast(Unknown Source)
         at com.crystaldecisions.report.web.event.av.a(Unknown Source)
         at com.crystaldecisions.report.web.WorkflowController.do(Unknown Source)
         at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source)
         at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
         at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source)
         at org.apache.jsp.jsp.dqcrystalviewer_jsp._jspService(dqcrystalviewer_jsp.java:274)
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
         at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672)
         at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:463)
         at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:398)
         at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:301)
         at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1063)
         at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:386)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:229)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1194)
         at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
         at com.acta.webapp.mdreport.servlet.JSFilter.doFilter(Unknown Source)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
         at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
         at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
         at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
         at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
         at java.lang.Thread.run(Thread.java:595)
    Any idea how this can happen?
    Regards,
        Martin
    Edited by: Martin Bernhardt on May 19, 2009 11:03 AM

    Martin,
    can you try to change the Settings of your Internet Explorer:
    Tools --> Internet Options --> General/Appearance/Languages
    Add "English (United States) [en-US]" and move it to first place above the "German (Germany) [de]" entry?
    Niels

  • Data quality and error messages during transformation

    I've read [Maintaining Data Quality in BW using Error Stack|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/20ebeb43-9e8a-2d10-b28e-825c0142ad4f] with great interest and hope this will become standard in the company, right now we have too many complex transformations which have been developed without logging and messaging.
    One thing is unclear, the error message described in the example
    monitor_rec-msgid = 'ZMESSAGE'
    seems to refer to a ZMESSAGE defined in another step.
    Could you please tell me how (transaction?) to define this message to be called during transformation?
    Thanks in advance

    se91

  • DSP Web Service Data Source runtime error "Invalid xsi:type qname"

    I have created a DSP data service that uses a web service as a data source.
    The web service wraps an Oracle PL/SQL package and works when tested independantly of the DSP data service.
    When I test the DSP data service using the weblogic workshop test view I get the error below:
    weblogic.xml.query.exceptions.XQueryDynamicException: {err}XQ0027: Validation failed: error: cvc-elt.4.2: Invalid xsi:type qname: 'ns0:EmpRecUser' in element getEmpResponseElement@http://hr/EmpWebService.wsdl/types/
    (The full stack trace and the WSDL imported into DSP are at the bottom of this posting)
    I am new to DSP but I have created data services from the DSP tutorials succesfully before.
    This is the first data service I have tried to create which is not from a DSP tutorial.
    I dont really understand the error message.
    It appears to me that type EmpRecUser is being prefixed by the wrong name space. In the WSDL the namespace is 'tns:' in the error message the namespace is: 'ns0'.
    <element name="getEmpResponseElement">
    <complexType>
    <sequence>
    <element name="result" type="tns:EmpRecUser" nillable="true"/>
    </sequence>
    </complexType>
    </element>
    I created the web service in Oracle J Developer from the tutorial URL below.
    http://www.oracle.com/technology/obe/obe1013jdev/10131/wsfromplsqlpackage/devwsfrom%20plsql.htm#p
    weblogic.xml.query.exceptions.XQueryDynamicException: {err}XQ0027: Validation failed: error: cvc-elt.4.2: Invalid xsi:type qname: 'ns0:EmpRecUser' in element getEmpResponseElement@http://hr/EmpWebService.wsdl/types/
         at weblogic.xml.query.schema.xmlbeans.XMLValidatorForXMLBeans.giveToken(XMLValidatorForXMLBeans.java:169)
         at weblogic.xml.query.schema.ValidatingIterator.fetchNext(ValidatingIterator.java:148)
         at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
         at com.bea.ld.wrappers.ws.JAXRPCWebserviceIterator.fetchNext(JAXRPCWebserviceIterator.java:104)
         at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
         at weblogic.xml.query.xdbc.iterators.ItemIterator.fetchNext(ItemIterator.java:86)
         at weblogic.xml.query.iterators.GenericIterator.hasNext(GenericIterator.java:134)
         at weblogic.xml.query.runtime.sequences.Subsequence.fetchNext(Subsequence.java:101)
         at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
         at weblogic.xml.query.runtime.querycide.QueryAssassin.fetchNext(QueryAssassin.java:54)
         at weblogic.xml.query.iterators.GenericIterator.peekNext(GenericIterator.java:151)
         at weblogic.xml.query.runtime.qname.InsertNamespaces.fetchNext(InsertNamespaces.java:238)
         at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
         at weblogic.xml.query.runtime.core.QueryIterator.fetchNext(QueryIterator.java:127)
         at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
         at weblogic.xml.query.xdbc.iterators.ItemIterator.fetchNext(ItemIterator.java:86)
         at weblogic.xml.query.iterators.GenericIterator.peekNext(GenericIterator.java:151)
         at weblogic.xml.query.xdbc.util.Serializer.processNamespaces(Serializer.java:340)
         at weblogic.xml.query.xdbc.util.Serializer.processElement(Serializer.java:262)
         at weblogic.xml.query.xdbc.util.Serializer.process(Serializer.java:206)
         at weblogic.xml.query.xdbc.util.Serializer.serializeItems(Serializer.java:152)
    Caused by: weblogic.xml.query.schema.xmlbeans.XMLValidatorForXMLBeans$ValidationException: null
         at weblogic.xml.query.schema.xmlbeans.XMLValidatorForXMLBeans$ExceptionCollection.add(XMLValidatorForXMLBeans.java:340)
         at org.apache.xmlbeans.impl.validator.Validator.emitError(Validator.java:175)
         at org.apache.xmlbeans.impl.validator.Validator.emitFieldError(Validator.java:207)
         at org.apache.xmlbeans.impl.validator.Validator.emitFieldError(Validator.java:193)
         at org.apache.xmlbeans.impl.validator.Validator.beginEvent(Validator.java:458)
         at org.apache.xmlbeans.impl.validator.Validator.nextEvent(Validator.java:246)
         at weblogic.xml.query.schema.xmlbeans.XMLValidatorForXMLBeans.processBeginElementToken(XMLValidatorForXMLBeans.java:1205)
         at weblogic.xml.query.schema.xmlbeans.XMLValidatorForXMLBeans.processToken(XMLValidatorForXMLBeans.java:1322)
         at weblogic.xml.query.schema.xmlbeans.XMLValidatorForXMLBeans.processTokensOnHold(XMLValidatorForXMLBeans.java:1349)
         at weblogic.xml.query.schema.xmlbeans.XMLValidatorForXMLBeans.gotBeginElementToken(XMLValidatorForXMLBeans.java:772)
         at weblogic.xml.query.schema.xmlbeans.XMLValidatorForXMLBeans.giveToken(XMLValidatorForXMLBeans.java:100)
         at weblogic.xml.query.schema.ValidatingIterator.fetchNext(ValidatingIterator.java:148)
         at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
         at com.bea.ld.wrappers.ws.JAXRPCWebserviceIterator.fetchNext(JAXRPCWebserviceIterator.java:104)
         at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
         at weblogic.xml.query.xdbc.iterators.ItemIterator.fetchNext(ItemIterator.java:86)
         at weblogic.xml.query.iterators.GenericIterator.hasNext(GenericIterator.java:134)
         at weblogic.xml.query.runtime.sequences.Subsequence.fetchNext(Subsequence.java:101)
         at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
         at weblogic.xml.query.runtime.querycide.QueryAssassin.fetchNext(QueryAssassin.java:54)
         at weblogic.xml.query.iterators.GenericIterator.peekNext(GenericIterator.java:151)
         at weblogic.xml.query.runtime.qname.InsertNamespaces.fetchNext(InsertNamespaces.java:238)
         at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
         at weblogic.xml.query.runtime.core.QueryIterator.fetchNext(QueryIterator.java:127)
         at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
         at weblogic.xml.query.xdbc.iterators.ItemIterator.fetchNext(ItemIterator.java:86)
         at weblogic.xml.query.iterators.GenericIterator.peekNext(GenericIterator.java:151)
         at weblogic.xml.query.xdbc.util.Serializer.processNamespaces(Serializer.java:340)
         at weblogic.xml.query.xdbc.util.Serializer.processElement(Serializer.java:262)
         at weblogic.xml.query.xdbc.util.Serializer.process(Serializer.java:206)
         at weblogic.xml.query.xdbc.util.Serializer.serializeItems(Serializer.java:152)
         at com.bea.ld.server.QueryInvocation.getResult(QueryInvocation.java:461)
    <definitions
    name="EmpWebService"
    targetNamespace="http://hr/EmpWebService.wsdl"
    xmlns="http://schemas.xmlsoap.org/wsdl/"
    xmlns:tns="http://hr/EmpWebService.wsdl"
    xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
    xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
    xmlns:tns0="http://hr/EmpWebService.wsdl/types/"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
    >
    <types>
    <schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://hr/EmpWebService.wsdl/types/"
    elementFormDefault="qualified" xmlns:tns="http://hr/EmpWebService.wsdl/types/"
    xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:soap11-enc="http://schemas.xmlsoap.org/soap/encoding/">
    <element name="getEmpElement">
    <complexType>
    <sequence>
    <element name="empNo" type="decimal" nillable="true"/>
    </sequence>
    </complexType>
    </element>
    <element name="getEmpResponseElement">
    <complexType>
    <sequence>
    <element name="result" type="tns:EmpRecUser" nillable="true"/>
    </sequence>
    </complexType>
    </element>
    <complexType name="EmpRecUser">
    <complexContent>
    <extension base="tns:EmpRecBase">
    <sequence>
    <element name="departmentId" type="decimal" nillable="true"/>
    <element name="managerId" type="decimal" nillable="true"/>
    <element name="hireDate" type="dateTime" nillable="true"/>
    <element name="jobId" type="string" nillable="true"/>
    <element name="employeeId" type="decimal" nillable="true"/>
    <element name="commissionPct" type="decimal" nillable="true"/>
    <element name="salary" type="decimal" nillable="true"/>
    <element name="lastName" type="string" nillable="true"/>
    </sequence>
    </extension>
    </complexContent>
    </complexType>
    <complexType name="EmpRecBase">
    <sequence/>
    </complexType>
    </schema>
    </types>
    <message name="EmpWebService_getEmp">
    <part name="parameters" element="tns0:getEmpElement"/>
    </message>
    <message name="EmpWebService_getEmpResponse">
    <part name="parameters" element="tns0:getEmpResponseElement"/>
    </message>
    <portType name="EmpWebService">
    <operation name="getEmp">
    <input message="tns:EmpWebService_getEmp"/>
    <output message="tns:EmpWebService_getEmpResponse"/>
    </operation>
    </portType>
    <binding name="EmpWebServiceSoapHttp" type="tns:EmpWebService">
    <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
    <operation name="getEmp">
    <soap:operation soapAction="http://hr/EmpWebService.wsdl/getEmp"/>
    <input>
    <soap:body use="literal"/>
    </input>
    <output>
    <soap:body use="literal"/>
    </output>
    </operation>
    </binding>
    <service name="EmpWebService">
    <port name="EmpWebServiceSoapHttpPort" binding="tns:EmpWebServiceSoapHttp">
    <soap:address location="http://localhost:8888/PL_SQL_WS-GetEmployee-context-root/EmpWebServiceSoapHttpPort"/>
    </port>
    </service>
    </definitions>

    DSP validates the results from webservices. Whatever you tested the webservice with outside of DSP, probably does not.
    Can you capture the output of the webservice and attach it as well? You can capture the webservice response by running the wls server with the command-line property -Dweblogic.webservice.verbose=true
    Can you also open a case with customer support for this? I will not likely have much time to look at it.
    - Mike
    btw - the namespace prefixes are just place-holders that are defined with xmlns:prefix="some-uri". It is the namespace uri's that must be equivalent. If, in one case you have the definition xmlns:tns="myUri" and in another case xmlns:ns0="myUri" - then tns:EmpRecUser is equivalent to ns0:EmpRecUser.
    Perhaps in the webservice result there is no definition, or an incorrect definition for the namespace prefix ns0 - that would explain the complaint about the QName ns0:EmpRecUser. According to the wsdl, there should be a definition for ns0 as :
    xmlns:ns0="http://hr/EmpWebService.wsdl"
    in the webservice response.

  • Oracle Data Profiling and Quality Microsoft Visual C++ Runtime Error

    Hi All,
    I have installed Oracle Data Profiling and Quality on a Windows 7 64-bit machine but every time I try to run the Profiler I get a C++ runtime error which when dismissed reveals an ODQ alert box that says a ReadProcessMemory or WriteProcessMemory did not complete.
    Has anyone encountered similar or does anyone have any ideas? I do not know where to start. Have tried a reinstall from a fresh download but get the same problem. The Metabase Server Admin tool works OK.
    Happy to supply any other info.
    If there's an ODQ forum please let me know and I will move.
    Thanks
    Dicksam

    Change the compatibility mode to windows XP service pack 2. I have this installed on a windows 2008 64bit server had to do that in order to get the metabase admin and the control center to work.

  • MDG Material BS_MAT_OVP_03 application is fine in development but giving runtime errors when moved to quality

    Dear Experts,
    We are Facing a problem with BS_MAT_OVP_03, We have done some enhancements and it is working very much fine in development and when we move it to Quality we are getting runtime errors, they are not with the enhancements but with in standard code itself.
    "ASSERTION_FAILED" " ""CL_USMD_ACC_FLD_PROP_DATA=====CP" or "CL_USMD_ACC_FLD_PROP_DATA=====CM009" "VALIDATE_RETURNED_FLD_PROP"
    we are getting above runtime error, Please let us know the reason for issue, If some one have come across.
    Regards
    Sukumar

    Hi Sukumar,
    It's because of few generated structures could be in "Inactive" mode for your data model when you move to quality system.
    Refer each generated structure from SE11 and activate them individually..this can be a post processing activity everytime you move data model structures from one ECC to other ECC.
    Thanks
    Praveen

  • Runtime error while creating material master data

    hello sir,
    i am facing one prolem while creating MATERIAL MASTER DATA.
    AFTER GIVING ALL REQUIRED INFORMATION WHEN I AM GOING TO SAVE THE DOCUMENT ITS SHOWING ABAP RUNTIME ERROR.
    MESSAGE TYPE: - MDS_KEYMAP.
    MESSAGE CLASS: 001.
    PLEASE TELL ME WHAT TO DO?
    REGARDS..

    SIR THANK YOU FOR YOUR REPLY.
    I ALREADY DONE THAT DUMP ANALYSIS.
    SO PLEASE KINDLY GIVE ME IN DETAILS ABOUT THAT SOLUTION...

  • Runtime Error while activating data into dso

    hello all,
    i get a runtime error if i try to activate the loaded data in a dso object. A part of the error message is shown here:
    "SAPLRSBATCH"
    "RSBATCH_START_PROCESS"
    285     call function 'TH_SERVER_LIST'               
    286       tables                                     
    287         list           = l_t_server              
    288       exceptions                                 
    289         no_server_list = 1                       
    290         others         = 2.                      
    291     read table l_t_server with key               
    292          host = sy-host.                         
    293     if sy-subrc = 0.                             
    294       l_s_rsbatchheader-server = l_t_server-name.
    295       refresh l_t_server.                        
    296     else.                                        
    >>>>       message x000.                              
    298     endif.                                       
    I found the function 'TH_SERVER_LIST' gives as result
    name = LAPTOP3_NSP_00
    host = laptop3
    As you see, the host is written in lower case!
    If i work with a testprogram to show me the sy-host value, i get it in upper case letters: LAPTOP3.
    Could it be a problem?
    I read another message here with advice for sap note xyz. But i cant apply SP08 like it is explained there. The current system is working with SP05. Later SPs are not available for me!
    I also cant apply the corrections manually because the developer key 29671482393151224771 is invalid for any user except BCUSER in transaction SE80 client 000! If i try to change or create a program/function in TA SE37 or SE38 i always get the message "invalid developer key".
    Pls tell me where can i change the value for the function TH_SERVER_LIST and how can i create my own functions and programs in NW04s?
    thanks you much
    Frank

    Hi Ron,
    thanks, this note describes what i have to do. But it doesnt help!
    How can i go to SP7 if i cant download it? Message "Für den angemeldeten User nicht sichtbar" appears always.
    How can i follow the instructions to correct the function modules if i dont have an developer key on the NSP system?
    I'm not in any ramp-up program. Just found the free sneak preview of NW2004s here in SDN, downloaded it and get the problems while using. So i ask what can i do?
    Thanks
    Frank

  • Runtime error while loading data in BI 7.0

    Hi All,
    While loading data in BI 7.0,
    I am getting Runtime Errors "TSV_TNEW_PAGE_ALLOC_FAILED" . No more space available for extending internal table.
    As per SAP BASIS SUPPORT comments:
    "This is NOT a space problem but rather a huge memory resource consumption one, as you're trying to hold excessive amount of data in Memory, and that's when you get the short dump; I know that SAP sometimes is not clear in explaining the issue (ie "No more storage space available...."), but this refers to memory requirement, not disk storage space per se.
    So, please try to break down your data load in smaller sets and this will work OK"
    How to proceed with the above comments? How to break down data load in to smaller sets?
    Please helpme....

    there could be various ways -
    using selections / filters in Infopackage / DTPs based on may be some period or some other char you could identify based on your data.
    Hope it helps
    Vikash

  • Crystal Report runtime error while changing Data Source Location

    Dear All
    We are using "Crystal reports for SAP Business one".The Crystal reports version is 12.1.
    We built a report in another database with another server.
    As we are importing the report in another database of another server,
    I am not able to change the Data Source location.
    When I am trying to change it,it gives Runtime error and closed automatically.
    How can i resolve and change the data source location?

    hi kambadasan,
    is your CR version the same from which you design the report and to the another server? also did you import your report directly to SBO without changing the data source first? in the case you should update first your Data Source in Crystal Report IDE before importing it to SBO.
    regards,
    Fidel

  • I'm unable to open itunes after the recent upgrade. Runtime error R6034 is the error message. I recently replaced my iPhone and I don't want to loose my data by uninstalling and re-installing the itunes?

    Hi,
    I've recently replaced my iphone 5 and I couldn't restore my data into my new phone, as it asked me to do the software upgrade on itunes in my computer. So, I did the itunes upgrade, which is now causing the Runtime error R6034. I wonder if I would loose my data (i.e., can't restore the data into my new phone), if I follow the uninstalling & re-installing steps. Plz advice, as how this runtime error can be fixed and at the sametime, I will still be able to restore my data into my new phone.

    Suresh14 wrote:
    I wonder if I would loose my data (i.e., can't restore the data into my new phone), if I follow the uninstalling & re-installing steps.
    Uninstalling & Re-installing iTunes will not delete your iTunes Library Data.
    Do the following:
    Uninstall from Windows the following four programs: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application Support. You do this from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
    Download the latest version of iTunes from Apple and note the location you're saving it to so you can find it once it's done.
    Run the iTunes installation as an administrator, just Right click iTunes installer and Run as Administrator.

  • Runtime error in data type

    i written following code in subroutine for script.
    it is giving runtime error as  " UNABLE TO INTERPRET 10,000 AS  A NUMBER .
    And it is indicating error in the line
    a_skfbt =  in_tab-value.
    pls suggest me solution.
    form  whd_tax tables in_tab structure itcsy
                         out_tab structure itcsy.
    data:  A_SKFBT type regup-skfbt,
           A_WRBTR type regud-wrbtr ,
           C_WTAX TYPE regud-skfbt.
    *break-point.
    read table in_tab WITH KEY NAME = 'REGUP-SKFBT'.
    check sy-subrc = 0.
    A_SKFBT  = in_tab-value.
    read table in_tab WITH KEY NAME = 'REGUD-WRBTR'.
    check sy-subrc = 0.
    A_WRBTR  = in_tab-value.
    C_WTAX = A_SKFBT  - A_WRBTR.
                                                and shkzg = 'H'.
    read table out_tab index 1.
    check sy-subrc = 0.
    out_tab-value = C_WTAX.
    modify out_tab index 1.

    Hi Venkat
    I have written the following code and it is not giving me any error:
    DATA: in_tab TYPE STANDARD TABLE OF itcsy,
          out_tab TYPE STANDARD TABLE OF itcsy.
    PERFORM whd_tax TABLES in_tab
                           out_tab.
    *&      Form  whd_tax
          text
         -->PA_IN_TAB  text
         -->PA_OUT_TAB text
    FORM whd_tax TABLES pa_in_tab STRUCTURE itcsy
                        pa_out_tab STRUCTURE itcsy.
      DATA: a_skfbt TYPE regud-sskfb,
            a_wrbtr TYPE regud-wrbtr ,
            c_wtax TYPE  regud-sskfb.
      READ TABLE pa_in_tab WITH KEY name = 'REGUP-SKFBT'.
      CHECK sy-subrc = 0.
      a_skfbt = pa_in_tab-value.
      READ TABLE pa_in_tab WITH KEY name = 'REGUD-WRBTR'.
      CHECK sy-subrc = 0.
      a_wrbtr = pa_in_tab-value.
      c_wtax = a_skfbt - a_wrbtr.
      READ TABLE pa_out_tab INDEX 1.
      CHECK sy-subrc = 0.
      pa_out_tab-value = c_wtax.
      MODIFY pa_out_tab INDEX 1.
    ENDFORM.                    "whd_tax
    Please let me know what is your exact problem? 
    I am working in ECC 5.0.
    Thanks and Regards
    Shivika Bhorchi

  • Visual C++ Runtime Error R6016 not enough space for thread data

    I get these errors on startup of my Windows 8.1 (with all latest updates installed) after login.
    1. It would be helpful if the error message actually identified the exe or dll causing the problem.
    Program: C:\Progra...
    Is not a very helpful clue to the source of the error and because of its brevity comes across as being contemptuous of the user.
    Image > https://plus.google.com/photos/116576618429528389782/albums/6004901461676803857
    2. From the active apps Desktop toolbar it appears that this problem may be associated with
    Apple IE DAV
    3. I suspect that the problem announced by this error might also be contributing to the the fact that my Chrome browser now appears to be overlaid with a pink matt variation on its entire colour scheme. I have reported the pink matt error directly to Google
    Chrome support.
    Thanks
    Martin

    Hi,
    Have you noticed any event in local event viewer related to this error?
    Error reference:
    C Run-Time Error R6016
    http://social.technet.microsoft.com/Forums/en-US/13aa9b30-e00a-4ddc-9763-93702084bbea/visual-c-runtime-error-r6016-not-enough-space-for-thread-data?fo
    Also, I suggest you to test the issue in clean boot mode to narrow down the issue.
    How to perform a clean boot
    http://support.microsoft.com/kb/929135
    If the issue doesn’t appear in clean boot mod, you can determine which one can be the cause by using dichotomy in MSconfig. Checking on half of Non-Microsoft service and restart, determining which half of the services cause the issue and repeating to check
    half of the problematic half services.
    Otherwise, please test the issue in Safe mode and let me know the results, then provide the screenshot of the error.
    Kate Li
    TechNet Community Support

  • Runtime Error during Phase Start Data Selection

    Hello Forums,
    We are using TDMS (2006_1_700) to extract a year's worth data from one client into a new client on the same ERP EhP4 system.
    All the systems - central, sender and receiver are at the same DMIS levels(SP16) and all necessary notes have been applied.
    During the Step 'Start Data Selection' of the Data Transfer Phase, we see around 60 of the ~12000 sub tasks abort with the below error:
    Batch job for access plan calculation in sender system ended with errors
    Message no. DMC_UTIL_MSG021
    Diagnosis
    The access plan calculation was executed as a background job in the sender system. In this background job, an error occurred.
    Procedure
    Check if a short dump occurred in the sender system while the access plan was calculated. If existing, this short dump contains further information about the cause of the problem.
    A frequent error is that selection criteria for data reduction (for example selection groups) are wrongly defined which causes the database access that consideres these selection criteria to fail.
    The corresponding dump in the Sender system is as below:
    Runtime Errors         SAPSQL_WHERE_PARENTHESES
    Exception              CX_SY_DYNAMIC_OSQL_SYNTAX
    Error analysis                                                                                |
    |    An exception occurred that is explained in detail below.                                      |
    |    The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SYNTAX', was not                |
    |     caught in                                                                                |
    |    procedure "/1CADMC/DMCACS00P000000001" "(FUNCTION)", nor was it propagated by a               |
    |     RAISING clause.                                                                              |
    |    Since the caller of the procedure could not have anticipated that the                         |
    |    exception would occur, the current program is terminated.                                     |
    |    The reason for the exception is:                                                              |
    |    The current ABAP program has tried to execute an Open SQL statement                           |
    |    which contains a dynamic condition. The part of the condition specified                       |
    |    at runtime is incorrectly parenthesized.   
    Please suggest in case any of you have encountered similar error and possible resolution.
    Thanks in advance,
    Srikishan

    Hi Suman,
    Thanks a ton. I somehow missed this when searching on the SMP.
    I will implement the steps and post it back by tomorrow.
    Regards,
    Srikishan

  • Data Quality vendor-specific error: An error occurred when calling function 'sdq_init_connector ()' in connector ": "(-8) Exception!." Detailed error message: Exception thrown by Java: java.lang.UnsatisfiedLinkError: nio (Not found in com.ibm.oti.vm.boots

    When attempting to create a new Account in siebel integrated with OEDQ the following error occurs.
    ERROR
    Data Quality vendor-specific error: An error occurred when calling function 'sdq_init_connector ()' in connector ": "(-8) Exception!." Detailed error message: Exception thrown by Java: java.lang.UnsatisfiedLinkError: nio (Not found in com.ibm.oti.vm.bootstrap.library.path)(SBL-APS-00118)
    STEPS
    The issue can be reproduced at will with the following steps:
    1) from EDQ director we have imported the EDQ_CDS,EDQ-REFERENCE DATA & EDQ_HISTORICAl DATA packages sucessfully.
    2) Created dnd.param file in SIebel server SDQCOnnector folder.
    3) Copied the libdnd.so file to siebsrvr lib directory(32 bit)
    3) In dnd.param file we have mentioned the javalib file and instllation directory path(<Siebsrvr roo>/dnd/install)
    4) Unzipped the EDQ-Siebel Connector files in dnd/install folder
    5) Copied the dnd.properties file in dnd/install directory and modified it accordingly to point to installed EDQ instance.
    6) Configured the Siebel components for EDQ integration.
    7) Realtime EDQ jobs are running.
    8) Create a new Account
    Env details are
    On : 8.2.2.14 [IP2014] version, Client Functionality
    EDQ 11.1.1.7.4
    IBM JDK 1.7 32 bit
    Using Open UI
    Any Champ have faced this issue and overcame it please let me know the resolution steps. your help is
    Regards
    Monoj Dey
    9007554589

    Hi Monoj,
    A few questions:
    - What OS is Siebel running on?
    - What version of the Siebel connector are you using?
    - Which libdnd.so file are you using?
    - What's the contents of your dnd.parms file?
    thanks,
    Nick

Maybe you are looking for

  • Field value on BSP Page

    Hi,       I have a requirement to show previous entered values in an input  field on BSP Page. for example suppose I enter value '0998' in an input field say 'XYZ'  and then I close or refresh the browser. again i open the page in browser and click t

  • Report Layout for MB5L

    Hi, Need help with this issue of mine, Currently the user follows this process. 1. Run the report with the company code, and previous period selected in the foreground 2. Double click on the GL account, for stock balances view, and add columns like M

  • Multilevel BOM Explosion

    Hi All, I am using one Function Module "CS_BOM_EXPL_MAT_V2" for multilevel BOM explosion. Input parameters for Function Module.. 1. Finished Goods(Material) 2. Application. 3. Explosion Date 4.Plant 5.BOM Usage. 6. Alternate BOM. Output  we are intre

  • MBAM 2.5 integration broke my Primary Site Server - Managment Point http status code 404, not found

    I uninstalled MBAM 2.0 and installed MBAM 2.5. During 2.5 installation there was this one section to enter "Web service application pool domain account", where I entered domain admin account. I don´t know if that has any effect on this problem. Thoug

  • Safari 8.0.2 will not launch after a crash

    Safari quit unexpectedly (when I tried to download a photo app), got pop up window asking me to select restart which I tried and it just keeps popping back up and won't restart.  Tried the "hold down the shift key" and nothing.  I've restarted and it