Data Rules, error and shadow tables - what is best?

Hi there
I'm new to OWB and have to create cleansing mappings whihc will take data from a staging table and put it to a cleansed table. We wish rows which fail the cleansing process to automatically be logged to an error table which is a identical to the cleansed area except with the addition of a error message field.
In the mapping I put the name of the error table in the error table property of the target cleansed table but it didn't put the row failing the not null constraint to the error table. When I executed the mapping via the Control Center it completed with warnings but didn't capture this row.
Additionally when cleansing records we wish to check the ultimate target area to check if records exist in certain tables. The problem is that since our targets have history the primary key of these tables is say code and effective date, therefore because we need to do a partal match we can't use foreign key constraints. I'm thinking we could only do this by creating a mapping manually.
Any help/guidance on best practice
Many Thanks

Welcome to iLife 06,
This is a major problem, and you'll notice that this discussion area is ripe with users like you and I who are furious over this. Apple has just orphaned Homepage.
Here's a thread where we were discussing it and some people posted work arounds. Notice that this thread has been locked! The only locked thread I've ever seen on an Apple board. What's that all about?!
http://discussions.apple.com/thread.jspa?threadID=331564&tstart=0
Share your concerns directly with Apple. Let's hope that an upgrade or batch comes out soon that re-enables Homepage or that at least provides some way to migrage the pictures over. I have 100s of such pictures, now orphaned.
Best,
- Seth

Similar Messages

  • How do we use Data rules/error table for source validation?

    How do we use Data rules/error table for source validation?
    We are using OWB repository 10.2.0.3.0 and OWB client 10.2.0.3.33. The Oracle version is 10 G (10.2.0.3.0). OWB is installed on Linux.
    I reviewed the posting
    Re: Using Data Rules
    Thanks for this forum.
    I want to apply data rules to source table/view and rule violated rows should go to defined error table. Here is an example.
    Table ProjectA
    Pro_ID Number(10)
    Project_name Varchar(50)
    Pro_date Date
    As per above posting, I created the table in object editor, created the data rule
    NAME_NOT_NULL (ie project name not null). I specified the shadow table name as ProjectA_ERR
    In mapping editor, I have projectA as source. I did not find error table name and defined data rules in table properties. It is not showing up the ERR group in source table
    How do we bring the defined data rules and error table into mapping?
    Are there any additional steps/process?
    Any idea ?
    Thanks in advance.
    RI

    Hi,
    Thanks for your reply/pointer. I reviewed the blog. It is interesting.
    What is the version of OWB used in this blog?
    After defining data rule/shadow table, I deployed the table via CC. It created a error table and created the all the source coulmns in alphabatical order. If I have the primary key as 1st coulmn (which does not start with 'A') in my source, it will apprear middle of of columns in error table.
    How do we prevent/workaround this?
    If I have source(view) in sch A, how do we create Error table in Sch B for source(view)?
    Is it feasible?
    I brought the error table details in mapping. Configured the data rules/error tables.
    If I picked up 'MOVE TO ERROR' option, I am getting "VLD-2802 Missing delete matching criteria in table. the condition is needed because the operator contain at least one data rule with a MOVE TO ERROR action"
    On condition Loading - I have 'All constraints' for matching criteria.
    I changed to "no constraints' still I get the above error.
    If I change to 'REPORT' option instead of 'MOVE TO ERROR' option, error goes off.
    Any idea?
    Thanks in advance.
    RI

  • Hey yall.. I lost everything from my mac from a data encrypted error and now it won't let me download Lightroom off of the disk again onto my new mac. What should I do?

    Hey yall.. I lost everything from my mac from a data encrypted error and now it won't let me download Lightroom off of the disk again onto my new mac. What should I do?

    Hi Brennacoyle,
    Can you please share the error message that you are getting while trying to download on the new MAC ?
    Cheers,
    Kartikay Sharma

  • How can i update data in okc_k_items and csi_item_instances tables?

    How can i update data in okc_k_items and csi_item_instances tables?
    by EBS .
    Thanks.

    For csi_item_instances table, you can use the following API:
    CSI_ITEM_INSTANCE_PUB.UPDATE_ITEM_INSTANCE
    For okc_k_items, try using the following API:
    OKC_CONTRACT_ITEM_PUB.UPDATE_CONTRACT_ITEM
    Hope this helps!

  • How to load data to dimensions and fact table is it simialr to sql server

    How to load data to dimensions and fact table in a data ware house environment, is it simialr to sql server, oracle?
    Never migrated or loaded data to datawarehouse server.
    I have an interview and am really confused if they ask anything related to the dataware house side elements.
    Coudl you please if you don't mind provide me some steps and dimension and fact table info, an example only.
    Atleast for my knowledge.
    Thank you very much for the helpful info.

    Some discussions in previous forums should help you
    http://forums.sdn.sap.com/thread.jspa?threadID=2019448
    http://forums.sdn.sap.com/thread.jspa?threadID=1908902
    In the SAP tutorial, you can see a sample example of making fact tables.
    http://help.sap.com/businessobject/product_guides/boexir32SP1/en/xi321_ds_tutorial_en.pdf
    Arun

  • Tcode to enter data in estmj and estrh tables?

    can any one know which tcode i have to use to enter data in estrh and estmj tables?

    It is actually telling me that CG01 is obselete in my 46c system, it will not l let me do anything else with that transaction.  I go to CG02, and I am able to create there.
    Regards,
    Rich Heilman

  • I burned a playlist to a data CD using itunes 11 but what is best way to get it import it into another computer with itunes running?

    I burned a playlist to a data CD using itunes 11 but what is best way to get it import it into another computer with itunes running?  I get an "X" when trying to copy to the "automatically add to itunes" folder on the 2nd computer.

    ok... so i i just made sure all my music is all together in 1 folder and i am going to trash my old music folder that is in the itunes folder... and follow your directions - let itunes start w/new library and bring my music in. Well, last little hurdle/question. I noticed that the place where my itunes library is - on an external drive doesnt have much space left on it. The place where i gathered all my music together in order to start fresh - is a different external drive and has LOTS of free space on it.
    SO... i now would like to just keep all that freshly compiled clean music right where it is but in advanced preferences I want to point to that new folder on the drive that has so much more space. So... should i delete the old music then go into itunes with a blank library and change the folder in preferences - quit and go back in and then follow your steps to loading my music? If i change the setting of where itunes looks for the music - that doesn't wipe out the old stuff... it just mixes it all up together right? I dont want that!!
    i promise this is the last question - i would love to fix this problem tonight and just be DONE!
    Thanks in advance for your patience and knowledge!!
    Lisa

  • No data in cube,but there is data in F and E table, also in dimension table

    Hi, gurus,
         I successfully loaded more than 100,000 records of data into an infocube, but when I check the content of the infocube(without any restriction),  unexpectedly no data displayed, also after I checked the F and E table, still no data, but there is data in dimendsion tables. what happened?
        please help. thanks a lot.

    Hi Kulun Rao,
    Try the following options.
    Check in the selection screen
    Go to infocube through LISTCUBE t.code
    Check the compression and roll-up statuses.
    Check the reporting status in request tab.
    Refresh the cube ( u already do it)
    Check the index status in Request tab**
    might be these things will help u.
    Regards,
    HARI GUPTA

  • Create error and integration tables o source

    Hi,
    I would like to perform all the integration steps on the source schema and then just put the data on my target table. This means that I want to create I$ and E$ tables on the source schema. How can I handle this? Shall I write a new CKM? I'm working with Oracle as source and target databases...
    Thanks!
    R.

    Mistake from me, I do not think this is entirely possible.
    Using CKMs and most of the incremental update IKMs suppose that objects are created on the target (Error tables are always created on the target server).
    The configuration that would work is with no control and an "IKM SQL to SQL Append" used from the source to the target.
    Regards,
    -FX
    PS: Sorry, I had no coffee (yet) ;-)

  • Profit center data in GLPCA and GLPCT Tables

    Hi ,
    We are in ECC 6 but with classic GL and profit center accounting.
    We have the documents posted with profit center as the assignment object. When i check the documents through document display i could see the profit center in it , but when i execute the transactions 5KEZ , 2KEE i couldnt fetch any data. Actually there is no data updated to the GLPCA and GLPCT Tables.
    These accounts are Frieght clearing , benefits clearing etc...
    My actual requirement is the ending balances of GL accounts by profit center subtotals/  GL Trial balance by profit center .
    Thank you.

    Hi
    If these are balance sheet accounts, you need to run period end transactions like 1KE* to transfer the balances to EC-PCA
    also, Tick the "Online Transfer" in EC-PCA config & Specify these accounts in 3KEH and then post a transaction.... It should get transferred online on real time basis
    Br, Ajay M

  • Problem in Selecting the data from EKPO and KONV tables

    Hi Experts,
    Presently I am working on Report with Comparision-Sheet Between the vendor's Quotations. I have to display the Discount, Freight, Packing and Forwarding, Vat in Item level data based on the conditions made in PO.
    As per my Knowledge, Condition Types are stored in KONV Table. But there is no relation between KONV and EKPO tables.  So, I am unable to print the data for Discount, Freight, Packing and Forwarding, Vat... How can I get the values from EKPO and KONV tables?
    Thanks in Advance.
    Thanks n Regards,
    Muralikrishna.

    Don't recall if this is correct, but you may need the condition number from the header (EKKO) combined with EKPO-EBELP or other field as you key to access KONV (KNUMH and KPOSN).  My site doesn't run PP, so can't verify if the data is actually stored that, so just a possibility.

  • BAPI to update data in KNA1 and ADR* tables

    Hi,
    I have to change customer data via BAPI.
    I'm searching for a BAPI that updates KNA1 and ADR* tables.
    (so that data will be coherent).
    I found BAPI_CUSTOMER_CHANGEFROMDATA1 but it seems to only update KNA1
    and BAPI_ADDRESSORG_CHANGE that only updates ADR* tables.
    Can you help me ?
    Thanks,
    Sandrine.

    I came accross such a requirement but couldn't find a single function module.
    I think try using both the FM's else BDC is the only option left.
    you can use the FM "DEBITOR_BDCDATA" to get the BDC data for vendor and then edit it to add the address fields required.

  • Craeting data fiel for data from KNA1 and ADRC table...

    Hi,
    I want to create a data file (tab delimited) which will have data from two tables, KNA1 and ADRC. The customer number, Name1 and Name2 fields data will come from KNA1 but the Street field data will
    come from ADRC table. The ADRNR number will be a linkage between two tables KNA1 and ADRC.
    I don't want to write a reprot for this. Can someone tell me if I can use SQVI for this and then go to options download in excel sheet directly from the menu.
    Is there any other smarter way to do it ?
    Regards,
    Tushar.

    Use an inner join between KNA1 and ADRC...The use <b>GUI_DOWNLOAD</b> FM to download the file...
    Greetings,
    Blag.

  • TS3694 im trying to restore my phone 4 and when its a bit over half done there comes up an unknown error and cancels everything what should i do

    im trying to restore my iphone 4 cuz it just shut down and said i should conect to itunes now when its half way done an unknown error pops up and cancels everything what can i do?

    Has your phone ever been jaibroken?  Also, why were you trying to restore your phone?

  • When travelling and using 3G what the best way to turn off all internet connections except web browser on a Mac pro?

    When Travelling and using a 3G mobile stick for internet connection My MacPro burns through a lot of expensive connection data time doing background stuff such as checking messages, email, ungrades etc. Whats the best way to turn all this off so that intenet is only accessed when I request it?
    Thanks

    To turn off iMessages see this thread - https://discussions.apple.com/thread/4504796?start=0&tstart=0 
    For iCloud, read the article - http://support.apple.com/kb/PH2613 

Maybe you are looking for

  • PGI Issue while creating outbound delivery.

    Hello All, I am facing a strange issue while doing PGI .The system gives the message as shown below ,although we have maintained Posting Periods in both MMPV and OB52. Please help on this issue. Posting only possible in periods 2011/07 and 2011/06 in

  • How to undo a batch change of all titles in iPhoto

    I accidentally secected all of my photos thinking I was in an album and batch changed all 30,000 photos titles to the same tilte. I had to forse quit due to the unstopable spinning ball. I'm about to cry but hope someone can help me... Mr. Old Toad??

  • Screen Resolution following download of game

    I recently downloaded a game from Bigfish.com and since playing the game full screen it now will now play but tries to open with the screen reoloution 800 x 600 and then crashes. Also if I go to screen preferences and open up the display it immediate

  • MSS mySAP ERP 2004 - PCRs

    Hi, Has anybody used JSP PCRs in MSS version ERP 2004, instead of Adobe forms? We'd like to keep the same webdynpro screens to select forms but after form selection instead of opening adobe forms, it opens JSP forms. I am wondering if this is possibl

  • Keeping selected row highlighted

    I have a datatable that has 2 panel grids in it. The first panel grid is used only to show the first image/link all the time because it is not stored in our database. The second panelGrid fetches a list of programs from our database, and lists them w