PGI Issue while creating outbound delivery.

Hello All,
I am facing a strange issue while doing PGI .The system gives the message as shown below ,although we have maintained Posting Periods in both MMPV and OB52. Please help on this issue.
Posting only possible in periods 2011/07 and 2011/06 in companlly code 1000
Message no. M7053
Diagnosis
The posting date entered is not within one of the permitted posting periods (current period/previous period).
This can be due to one of two reasons:
The correct current period has not been set in the system.
For the system, the first of the entered periods is the current period. At the beginning of a new period, your systems administrator must change the current period in the material master record, using the function "Shift periods". This has not yet been done.
You have entered a wrong date in the field "Posting date".
Procedure
Check the posting date and correct it if necessary. If your input is correct, inform your systems administrator that the "period shifting" (period-end closing) process has not yet been completed. Copied from M8022
Regards
Deepak

Hi Deepak,
1-Please close all the login of the user logged in.
2-Goto SU01,put the required user ID and click on for change mode.After this goto "Parameters" Tab.
3-Add parameter Id="MMPI_READ_NOTE".It will read the SAP Note 487381 and allow you to initialize.
4-In the parameter value,put the current date and then save
5-Now goto MMPI and put the date=05.07.2011 or in period you can put 1 and fiscal year=2011 for the respective company code and execute.This will open the July Month of 2011.Hence will allow the posting on 05.07.2011
6-Now check in MMRV,it will show fro the respective company code,the current period will be 01....2011 and previous Period=12...2010.
7-Now do all the activities for july 2011 month.
8-After July close the period through MMPV and it will automatically open for Aug month i.e 06..2011 period
please try to check based on the above steps
Revert with your result
Regards,
Prasanna

Similar Messages

  • Issue while creating Outbound Delivery using Standard BAPI

    Hi all,
    I am trying to create an outbound delivery for a Sales order using the Standard BAPI - BAPI_OUTB_DELIVERY_CREATE_SLS.
    After giving the valid inputs for Sales order no and doc no, am getting an error as "No instance of object type OutboundDelivery has been created. External reference:" But when trying to create manually there is no problem. Please suggest what may be the issue and how to correct it?
    Regards,
    Vimala P

    Hi Vimala,
    I am trying to create outbound delivery using BAPI_OUTB_DELIVERY_CREATE_SLS & BAPI_DELIVERYPROCESSING_EXEC. But no success. Getting "No instance of object type outbound delivery has been created" in return.
    1) Delivery Type
    2) Delivery selection date
    Needs to be passed in import parameters.
    Could you please tell me what are all the parameters to be passed under tables tab in RV_DELIVERY_CREATE?
    Thanks in Advance..
    Regards,
    Rajasekar .M

  • Exit to set the automatic PGI and picking while creating outbound delivery

    Hi experts,
    Could anybody suggest how to set the automatic PGI and Picking while creating outbound delivery.
    Currently we are settting VBUK-WBSTK field with value C. But PGI is not happening.
    kindly help me.
    Regards,
    Ravi

    Hello Parihar,
    thanks for reply.
    yes we know that "This process of picking and GI involves reducing the stock and allocating the goods to the delivery"
    if you go for Custom program and Use FM WS_DELIVERY_UPDATE, we can do Picking and PGI.
    our requirement is to do pickong and PGI while creating Delivery it self, based on this output types will be processed.

  • Automatic Batch determination while creating outbound delivery

    Hi,
    I have already performed following steps, but still i am facing problem for Automatic Batch determination while creating outbound delivery :
    1.CT01- Creation of Characteristics. ( Define Selection Class )
    2.CL01- change. ( Define Selection Class )
    Add Characteristics in u2018CHARu2019 tab And save .
    3.CU70 u2013 create u2018Sorting Sequenceu2019 and assign characteristics
    4.Batch Search Procedure & Strategy type
    V/C3 u2013 Batch Search Procedure and assign the strategy types
    a.To create condition type T. code V/C1
    b.To create access sequance T. code V/C2
    5.V/C5 - Allocate SD Search Procedure/Activate Check u2013 assign sales organization , order type into Batch search procedure.
    6.V/CL - Activate Automatic Batch Determination in SD - Activate automatic batch det. for delivery item categories u2013 select item category and activate auto batch determination
    7. VCH1 u2013 Create batch search strategy against strategy type as per the access sequence needed.
    Please let me know is there any other step, apart from it.
    Tx
    Uts

    Dear saravanan,
    Re :Check from ur material master view ' Sales: General/Plant Data' that availability check should be 02 and batch management should get activated .
    Done!
    Re: check CT01 - addnl data table name and field name maintained ( which field to be taken for batch determination )
    Done!
    Re:check CL01 - char - is maintained with CT01 char
    Done!
    Re: check from v/c1 'Sort sequence' and Qty proposal 1 are maintained correctly.
    Done!
    Still i am not able to get batch automatically...
    Is there any LIFO or FIFO settings i have to maintain in Material master.
    Pl guide.
    Tx
    Uts

  • Enhancement to change the quantity while creating outbound delivery

    Dear All,
    Is there any enhancement to change the Actual Quantity while creating the Outbound delivery.
    I have tried using the BAdI LE_SHP_DELIVERY_PROC in the method CHANGE_DELIVERY_ITEM. But i am not able to change the quantity. In the runtime it allows me to change the quantity. After saving the document the quantity is not changed.
    I do not know what all are the parameters and fields to be passed to change the quantity. If anyone knows please help me.
    Anyone guide me to do this requireemnt.
    Thanks & Regards,
    M.Ashok kumar.

    Hi Ashok,
    I have a similar issue, i have done the same as you did by changing the fields LFIMG_FLO and LGMNG_FLO.
    But though Delivery qty is getting update but picking qty is remaining the same.
    Suppose when user give Delivery qty as 8 and Pick qty as 8, i am able to change the delivery qty to 5 but not Pick qty to 5.
    can you please let me know how to acheive it.
    Regards,
    Kartheek.

  • Updating Serialnumbers automatically while creating Outbound Delivery

    Hi Experts,
    My requirement is to populate serial numbers automatically while saving the outbound delivery (VL01N).
    I tried with user exits, but I am unable to succeed.
    I am using ECC5.
    Any help would be greatly appreciated.
    Thanks,
    Veera K

    Hi Veera,
    For an example if there is a  need to update some table with delivery number and serial number on saving a delivery:
    in include MV50AFZ1:
    FORM USEREXIT_SAVE_DOCUMENT.
    *{   INSERT <TR#>
    "work structure LIKP has the header info here
    "Use that and fill the required workstructure and update the correponding table
    *}   INSERT
    ENDFORM.

  • Issue of creating outbound delivery

    2011/01/29     Stock                                                            2,963      2,963                
    2010/12/07     Order     0000136645/000030/0001               30-     2,933                
    2010/12/29     Order     0000128407/000020/0001               1,800-     1,133                
    2011/01/04     Order     0000137517/000090/0001               500-     633                
    2011/01/20     PrdOrd     000004080841/NO  /PD     2011/01/13     10     178      811      5000     B
    2011/01/20     Order     0000128409/000040/0001               3,500-     2,689-               
    2011/01/21     Order     0000137516/000080/0001               500-     3,189-               
    2011/01/26     Order     0000141595/000020/0001               3-     3,192-               
    2011/01/26     Deliv.     0081188756/000020/0000               67-     3,259-               
    2011/01/28     Deliv.     0081193482/000030/0000               1,500-     4,759-               
    2011/01/31     IndReq     VSFB/LTP-5CN1               164-     4,923-               
    2011/02/07     IndReq     VSFB/LTP-5CN1               76-     4,999-               
    2011/02/11     PrdOrd     000004080605/NO     2011/01/13     10     2,000      2,999-     5000     B
    2011/02/14     PrdOrd     000004076573/NO     2011/01/13     10     1,900      1,099-     1000     B
    2011/02/14     PrdOrd     000004079824/NO     2011/01/21     10     1,440      341      5000     B
    Could you help to look at above data?
    When I am trying to do goods issue via vl01n, it says only 396pcs available...

    When I am trying to do outbound delivery of 0000128409/0040...

  • Where to Authorization check for the plant while creating outbound delivery

    Hi Experts,
    For outbound delivery , the standard program is not doing the authorization check .
    Can i use BADI       *LE_SHP_DELIVERY_PROC *        and the method :     DELIVERY_FINAL_CHECK
    To write Authority-check statement ,
    If the particular is not authorized for any of the plants of the items in the outbound delivery i will throw a error message
    Can i use as above?
    And if i use it has to apply only for outbound delivery?Because for inbound delivery also the same BADI is getting triggered?
    Please suggest.
    Regards
    Ramakrishna L

    Hi,
    Yes you can use the said BAdi and the method if it is triggerd before the SAVE of the Outbound Delivery Order to do the Authorisation Check. In case the code is triggered for all the orders and you want only to restrict for the Outbound Delivery, then check for the Delivery Type (LFART) from the Delivery Header table for only the Outbound Delivery Order.
    Thanks,
    Susanth Swain

  • How to update picked qty as delivery qty while creating outbound delivery

    Hi,
    I am using badi definition LE_SHP_DELIVERY_PROC to update delivery qty as picked qty at the time of creating delivery. By using method SAVE_DOCUMENT_PREPARE I am populating delivery qt(yCT_XLIPS- G_LFIMG) to picked qty(CT_XLIPS[1]-PIKMG). and i am also populating update flag as 'I'. after saving the delivery document i am not able to update picked qty which was populated in BADI. could you please suggest anything needs to care. thanks in advance.
    Regards,
    Peranandam

    Hi,
    I did a little test and, within the method CHANGE_DELIVERY_ITEM, itu2019s possible to fill the picking quantity (structure CS_LIPSD) but unfortunately during the save the added information is lost.
    This is because the BAdI method is fired too soon and the routine PICKMENGE_BEARBEITEN (SAPFV50P) is not called at all.
    The problem is quite complex; even after changing the picking quantities, the picking status still remains open!
    The picked quantity is generally filled:
    u2022     by printing the picking list
    u2022     Warehouse Management by creating a transfer order
    u2022     or by manual entry
    Otherwise, it is assumed that picking has not yet been initiated and the result is that picked quantity is ignored.
    In my opinion itu2019s very difficult to solve your problem using only the BAdI implementation.
    I suggest you to propose an alternative solution such as the automatic processing of Picking Output EK00; easy to activate and absolutely standard!!!!!!
    Regards,
    Andrea

  • Creating outbound delivery with reference to inbound delivery

    Dear all,
    My requirement is as follows:
    I get an inbound delivery from my vendor for the our sales orders. (For n number of sales orders having same shipping point, shipto party ad sold to party, we get one inbound delivery) As of now we are using that inbound delivery and read data from LIPK and LIPS and using 'BAPI_DELIVERYPROCESSING_EXEC' to create outbound delivery.
    But, it is creating one delivery each for every sales order. What we require is to create only one outbound delivery.
    I have searched in forums and tried to use VL10A, VL10C but since the delivery dates of each order are different I cant use those transactions.
    Now I have two options:
    1) Take inbound delivery as reference and create outbound delivery. Are there any FM's or BAPI's for this which will create 1 outbound for each inbound?
    2) Can we combine multiple sales orders into a single delivery when the delivery dates are different.
    Could you please help me.
    Thanks in advance,
    Aravind

    Hi Aravind,
    I am facing some issues while creating Outbound delivery using the BAPI 'BAPI_DELIVERYPROCESSING_EXEC'. I am getting the error message in return parameter as "No instance of object type OutboundDelivery has been created. External reference:"
    If you are successful in creating Outbound delivery, please suggest what may be the issue for this message. Iam passing the exact sales order no and item no., quantty and unit of quantity. Also manual creation of Delivery using VL01N is successful but using the BAPI it is unsuccessful. Please suggest with your valuable points on this.
    Regards,
    Vimala P

  • BAPi to create Outbound delivery with PGI

    Hi all,
    What BAPi , we can use to create Outbound delivery with PGI.
    Please help me in this regards.
    Deekshitha.

    Hi,
    Use the BAPI BAPI_GOODSMVT_CREATE
      check this link.... u will get all help from this code..
    http://sap4.com/wiki/index.php?title=BAPI_GOODSMVT_CREATE&printable=yes
    <b>rEWARD POINTS</b>
    rEGARDS

  • Error while doing outbound delivery against Purchase Order

    hello
    i m getting error while doing Outbound delivery for purchase order as follows
    EKPO-SOBKZ=E; EKPO-UMSOK=_; EKPO-KZBWS<>_ EKPO-KZVBR<>E (Note 305582) not supported (check your entry)
    Message no. M7146, i m not getting wht will be the reason,
    Regards
    NISHJ

    Please go through the note - 305582. It is clearly given the direction.
    Symptom
    You try to post a goods movement for a stock transport order from the unrestricted-use stock into the sales order stock or project stock.
    During the goods issue, the system displays error message M7146 with a text along the lines of "EKPO-SOBKZ=E; EKPO-KZVBR<>E; ... not supported".
    Cause and prerequisites
    In the goods issue for the stock transport order, the system may have to create a stock in transit which is deconstructed during the goods receipt. If the withdrawal takes place from the special stock, it is clear which is the receiving stock.
    However, if the withdrawal is carried out from the unrestricted-use stock ("Collective requirements", controlled by the dependent requirements indicator MARC-SBDKZ in the material master of the issuing plant), this results in the design problem that the control tables of the goods movement do not have any key field for the receiving stock. Therefore, the control for the receiving stock is controlled via the consumption indicator in the account assignment category of the purchase order. The consumption indicator therefore requires a specific default setting (you may have assumed you could change the design of these control tables, however this is not possible).
    Using an inappropriate consumption indicator then causes for the goods issue an incorrect or no stock in transit to be created so that the goods receipt fails.
    Solution
    Implement the program change in accordance with the correction instructions.
    Afterwards implement Note 413908 immediately if this is relevant for your release.

  • Idoc to post goods issue against an outbound delivery

    We happened to simulate both the idocs 'WPUWBW01' and 'MBGMCR02' for posting goods issue for an outbound delivery but failed.
    Request you people to help us on this. Is there another idoc that we have to use to post GI... if so please let us know... and if we are using the right one, guess we are not executing it in the right way... in such a case please guide us with the steps...
    Thanks
    Arun
    We got hold of the Idoc type 'DELVRY03 PGI SHPCON' we are able to post the Idoc but we are able to do the packing only or we are able to change the deliveries but the PGI is not happening..
    please help us on this.. is there some condig that updates the delivery with the PGi or is there something else do be done in the Idoc....
    will provide additional details if required.
    Thanks

    Hi Arun,
    There are no configuration settings in this. It is development that your abaper need to carry out.
    Explain to him that this is the func module. And intrun it has to either trigger a BDC or BAPI for creating packing and PGI.
    He should then do the recording of that and will assign the program pertaining to BDC with in the function module.
    One more suggestion is to put the same query in ABAP section too. U will definitely get a positive response.
    Hope this helps.
    Kind Regards
    Chakradhar

  • SHP_DELIVERY_CREATE_FROM_STO to create outbound delivery

    HI,
       Im using SHP_DELIVERY_CREATE_FROM_STO to create outbound delivery document for an STO order. For that particular material there are different storage locations ,so the it is not getting updated in VL02N which is stopping from doing PGI(Goods issue). Can any one pls suggest how to update storage location in the LIPs table.
    Thanks,
    Vinodh

    Hello,
    Were you able to pass Storage location LGORT as input using BAPI BAPI_OUTB_DELIVERY_CREATE_STO. If yes, Then can you pls share the details how did u achieve it.
    Thanks
    Sheela

  • Create outbound delivery for in-transit stock

    hi,
    the situation is that i need to create an outbound delivery for a sales order considering In-transit material let say item 20 in sales order.
    this item 20 is NOT present in the plant but is in transit from another plant.
    normal SAP wont allow creation of delivery if stock is not present in plant. hence we have marked a special indicator for that material.hence while doing the availability check in VL10 , it should allow me to create outbound delivery.
    The issue is i need to know the place where i can manipulate this availability check so that it considers this item 20 as special case and allows the Delivery to be created.
    there is a check indicator field MTVFP, but i cant find where is it comparing this field .
    thanks.

    Hi,
    Kindly check the Info Record.
    whether you have maintained delivery date or not.
    _Otherwise automatically pick the delivery date as from Item line delivery date
    ._But you can have the delivery date field in shipping tab.
    SAM
    Edited by: Saminathan Gopalan on Jun 28, 2010 1:59 PM
    Edited by: Saminathan Gopalan on Jun 28, 2010 2:00 PM

Maybe you are looking for