Data Transfer Erec and ECC HR

Hi all,
We are using having 2 backend systems 1 for HR other than Erec and another one for erec.
Now we have setup the ALE data transfer using Message type HRMD_ABA.
In erec we have only ERECRUIT Component deployed in backend,no EA HR or SAP HR component deployed.
MEaning no PA* tables.
Now when Transfer personnel number(HR!001-A008 with Position) to erec box,it says no pernr exist.
Howver i cannot tranfer the pernr from ECC to Erec as we dont have PA* tables in Erec.
Can you share me the object types that are transferred from ECC to EREc and EREC and ECC.
What are the components to be deployed in backend Erec box.
In Portal for requistions application which should backend(System Object) and for recruiter and recruitment admin applications which should be the backend system(System Object).
Thanks,
Nachy

Hi,
Check the link :
http://help.sap.com/saphelp_erp2005/helpdata/en/45/8150635e9c40c1e10000000a1553f7/frameset.htm
Supported infotypes for transfering data from the E-Recruiting to the HR-System are the PA infotypes 0,1,2 and 6. There are 15 fields sent to pa48 if they were filled in the E-Recruiting system, which are
- forename, initials, surname
- gender
- birth date
- correspondance language
- address (street, city, streetcode, region, country)
- hiring date
- organisation unit
- position
- personel number (for internal candidates)
So these are the infotypes which can be transfered automatically and cause no problems. If you want the "title" to be transferred additionally, you have to adjust the system behaviour accordingly.
To set up data transfer,
In E-Rec System, use Tcode - BD64 Partner Type LS - Generate partner profile for the ECC System
Use Tcode - WE20 for the Partner profiles checking
For ECC Partner Profile, Give Outbound parameters - Messahge type HRMD_ABA and SYNCH. Give Inbound parameters- Message Type HRMD_ABA
In ECC system, use BD64 for the Partner Type LS. Partner Type LS - Generate partner profile for theCreate Erec System(
Use Tcode - WE20 for the Partner profiles checking
For E-Rec Partner Profile , Give Outbound parameters - Messahge type HRMD_ABA and SYNCH. Give Inbound parameters- Message Type HRMD_ABA
After doing data transfer using RHALEINI, use transaction SM58 to check whether the data has been transferred or not.
Hope it helps!
Arpita

Similar Messages

Data Transfer Process and Delete Overlapping Requests

Hi All,
We are on BW 7.0 (Netweaver 2004s). We are using the new data transfer processing and transformation. We want to use the ability to delete overlapping requests from a cube in a process chain. So lets say we have a full load from an R/3 system with fiscal year 2007 in the selection using an infopackage. It gets loaded to the PSA. From there we execute the data transfer process and load it to the cube. We then execute the delete overlapping requests functionality. My question is, will the DTP know that the infopackage selection was 2007 so it will only delete requests with selections of 2007 and not 2006 from the cube? Basically, is the DTP aware of the selections that were made in the infopackage?
Thanks,
Scott

Hi Everyone,
Figure it out...on a data transfer process you can filter the selection criteria - go to the extraction tab of a DTP and click on the filter icon. Enter your seleciton conditions to pull from the PSA....these seleciton conditions will be used to delete the overlapping requests from the cube.
Thanks

Data transfer processes and info packages in new client

Hi,
We have created new client from the development client.
The Info cubes and update rules are available in new client, bu the data transfer processes and info packages are not moved to the new client.
What is the actual sequence of steps to be followed when new client created from development client. Have I missed some sequence or steps. What are the sequence of steps to be followed when created a new client.
Kindly suggest to resolve this issue.
thanks and regards
Murugesan

Hi,
I have never seen clients created on the BI system. As such all the objects in the BI system are client independent as well as the data stored in the tables does not have the mandt field. Hence you cannot distinguish different clients in the BI system. Also if you notice all the request in BI are workbench request and not customizing requests.
I do not think this is a viable solution. Maybe you can contact SAP.
http://help.sap.com/saphelp_nw70/helpdata/en/b7/8a9a3aaf894871e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/a9/bb963a570b4b5de10000000a114084/frameset.htm
Regards,
Vikram

Data Transfer Process and Infopackage

Are both Data Transfer Process and Infopackage the same...Can someone please explain... thanks

Hi,
Pl search the forum for these questions as these are mostly discussed in the forums.
or simply google it...
Now IP is mandatory and used to bring the data from source to PSA..
and DTP is loading and transfering the data within BI itself.
rgds,

Data Transfer Toolbox for ECC 6.0

I am on ECC 6.0 and I am trying to install the data transfer toolbox (DTT) for HCM. I installed the ERP05V4.SAR file (which is in the 600-ERP-DATA folder), but there are no DTT tcodes. A colleague of mine told me he has used this in earlier versions of SAP (ECC 5.0) and he installed BPERPVD.SAR (which is in the 500-ERP-DATA folder) and the DTT was installed. So it seems that this does not exist for ECC 6.0, but we need it so I am looking for help!
I downloaded all of these files from OSS-downloads-SAP installations and upgrades-Enter by application group-SAP best practices-Best practices for my SAP all in one-SAP BP for HCM-HCM V1.500-installation.
Thanks
Mike

Hi Michael,
Were you able to get DTT installed for ECC 6.0? We are also, in the similar situation, trying to get DTT loaded in ECC 6.0.
Thanks.

NI8451 SPI data transfer speed and SCLK setup time adjustment

I'm using NI USB-8451 SPI bus to do communication. I can not reach the speed of communication 4MHz (NI USB-8451 module advertises speeds up to 12MHz). Actrually the data transfer speed is much slower than 4/8 Mb/s. The 16k*16bit data cost around 800ms while it should be 128ms if the data transfer achieves 4Mhz speed. In the manual there is a SPI timing clock figure like this:
In the 4Mhz communication case, the t2 should be 0.25us. I wonder whether the low data transfer speed is due to t1,t3 and t4 since they occupy too much "dead time". If my guess is right, is there any method to reduce the t1,t3 or t4, espetially t3? I know that in the advanced API there is a way to add delay while I did not figure out how to reduce delay(t3). If my guess is wrong, what is the exactly maximum data transfer speed NI8451 can support? (not the clock rate)
Thanks for help.

Hi everyone. Im using the SPI communication with 8451 and Im having the same situation., since the serial flash memory I need to program is big enough, t3 (SCLK Setup time) and other "dead time" which I think is the time when buffer on the 8451 needs to be re-filled those are killing my expectation on the final results. I can't see a way to decrease t3 (~10uSec) and in the same way Im seeing something like buffering up to 100~110 bytes then, a ~1.5mSec delay appears on the signal waveforms. Did somebody have good results trying to avoid this?
Thank you.
Javier
Attachments:
t3 - SCLK setup time.jpg ‏156 KB
Data byte Transfer_109.jpg ‏137 KB

Synching the data between MDM and ECC

Hi All,
We have been on SAP MDM Central Master Data Management scenario for more then a year now. In the pas we have seen many issues ike - Syndication server failures, idoc failures due to which the data is not 100% in synch between MDM and ECC.
Though we are working on the idoc failure tracking process but my question is this -
I need to create an automated program which runs on a weekly basis finds the data which is out of synch in MDM and FEP and gives me the same. So the logic should be something like this - Pick up the records updated during the last week in MDM, look for those records in ECC. Compare field by field and give me the delta.
Since it is a central master data management scenario hence there are cases in which records are created in MDM but not present in ECC may be because of syndication failures or idoc failures.
Any one worked n a similar sort of program/logic? Kindly let me know your experiences as well in efforts to keep the data in synch.
Regards,
Indraveer

Hello Indraveer
Yes you can do it.
You can configure exchange between ECC and MDM by schedule directly or through PI
or
SAP MDM 7.1 has own API for ABAP, JAVA, .NET. (5.5 for ABAP,JAVA, .COM)
That may be abap transaction or java(.net) application is working by schedule.
more about MDM API you can read here:
ABAP
http://help.sap.com/saphelp_nwmdm71/helpdata/en/48/edff445128209ce10000000a42189d/frameset.htm
JAVA and .NET
http://help.sap.com/saphelp_nwmdm71/helpdata/en/13/041975d8ce4d4287d5205816ea955a/frameset.htm
JavaDocs
http://help.sap.com/javadocs/MDM71/index.html
Regards
Kanstantsin Chernichenka

What is the difference of customer master data between CRM and ECC

Dear all,
We are helping customer to evaluate using CRM or ECC to manage there customer master data, focusing on the benefit of using CRM system.
Can any one help to compare the difference between these two system?
some tips in my mind are:
1. CRM has a friendly user interface for user to adjust the layout, hide/display favourite information according to actuall req.
2. In CRM, user can change the field/assignment block description easilly
3. in CRM7.0, user can add new customzing field easilly via AET
4. CRM has a good any analysis platform to provide pie chart analytic
5. CRM store more customer infor. than ECC, such as Marketing attribute, account classfication...anything else?
any other benefit to use CRM for customer master data? Pls help!!!
Thanks very much!!
BR,
Hedy

I would agree with most of the topics you mentioned. Just one remark to topic number 5. Business partner doesn't have more data than erp. It has some more marketing oriented data, but on other hand doesn't have all finincial and credit data that are relevant for erp financial transactions.
In our company we have the following scenario: all business partners are created in crm (because there the sales activities are started and because we don' clasify at the begining all partners as customers but as prospects. and of course it has nicer user interface). but when we are closing the deals (ordreds are transfered to erp), we fill some additional (financial) data of that partner on erp side and clasify partners as customers.
Regards.

Data Transfer Tool for ECC 6.0

Hi All,
Good Morning. I would like to know if anybody has had the opportunity to use this tool in ECC 6.0. If so, where did you obtain the software related to this tool?
Please Advise.
Kind Regards,
Daniel A. La Mendola

I am actually looking for where the program resides and if it exists for ECC 6.0. I have found tons of documentation, but nothing on how to obtain the tool itself.
If anybody can assist me in the endeavor it would be greatly appreciated.
Thanks again for you help

Data Transfer Between HR and Erec

Hi all,
We are using having 2 backend systems 1 for HR other than Erec and another one for erec.
Now we have setup the ALE data transfer using Message type HRMD_ABA.
In erec we have only ERECRUIT Component deployed in backend,no EA HR or SAP HR component deployed.
MEaning no PA* tables.
Now when Transfer personnel number(HR!001-A008 with Position) to erec box,it says no pernr exist.
Howver i cannot tranfer the pernr from ECC to Erec as we dont have PA* tables in Erec.
Can you share me the object types that are transferred from ECC to EREc and EREC and ECC.
What are the components to be deployed in backend Erec box.
In Portal for requistions application which should backend(System Object) and for recruiter and recruitment admin applications which should be the backend system(System Object).
Thanks,
Nachy

Hi ,
1) First get your users created with roles in your Erec system
Example recruiter ,Manager ,Recruitment Admin
2) Get your Structure created in your HR back end system .
3)Make sure you maintain your basic Infotypes with 0105 miantained (System user name /Email id )
Assign the user to 0105 subtype 0001
4)ALE that you have setup first move Org structure moved
next move the person (Pers no ) .
ALE chose the insert mode and goto WE10 if yoru IDOCS are clean without errors .
Make sure all the personal data including address ,postal code is all maintained .
Let me knwo if it helps
Regards
Santosh

SNP planned order availability date difference between APO and ECC

Hi,
I have observed that SNP Planned order availability date is not matching between APO and ECC. Details are as follows.
I ran SNP Optimizer with bucket offset of 0.5. After publishing the optimizer created planned orders to ECC, only start date is matching.
Example:
I am using PDS as a source of supply.
Fixed production activity in SNP PDS is 1 day.
GR processing time: 3 day
After running optimizer planned order is created with dates explained below.
Start date/time: 09.05.2011 00:00:00
End date/time: 12.05.2011 23:59:59
Availability date: 16.05.2011 00:00:00
Because of bucket offset defined as 0.5 optimizer planned order availability is start of next monday.
After publishing this planned order to ECC dates on the planned order is as follows.
Start date: 09.05.2011
End date: 09.05.2011
Availability date: 12.05.2011
I have not maintained any scheduling margin key in ECC. Also if I dont define the GR processing time, planned dates between APO and ECC always match. Can anyone explain the impact of GR time on the availability date.
Regards,
Venkat

Hi Venkadesh,
What's "state stamp"? Do you mean different time zone?
note : 645597 mentioned by Nandha is very helpful:
In standard, CCR will use duedate - "the available date of the output product".
Nandha's words "In SAP APO, if the receipt date of the primary product deviates from the
end date of the last activity of the order, the receipt date
always identifies this as inconsistent. You cannot rectify
inconsistencies of this type by using CCR."
I guess in your PDS or PPM, the output product is not assigned to the End of the last activity. Someone changed it?
Please CIF the PDS or PPM again.
If you really want to apply a note, please use note 815509 as you're using planned order,
and system will use order end date in CCR instead.
GR time is always considered. BR/Tiemin

Is it mandatory to use Business object for data transfer and work flow?


<pre>
In our enterprise projects we deal with some screens where we add or update some data and again
we retrieve that data and display to user in various ways like displaying on screen as
a report or viewing in excel etc.. Most of the times, though we identify the business objects
based on the nouns in requirements document, really while implementing there will not be any
business logic in the objects. Almost all the objects which we identfy as business objects
may have methods like add, delete, update and retrieve methods. Still in these cases, is it required to
have business objects or can we use transfer object to send the data for saving and retriving or any other
pattern/guideline is there for dealing such cases?
I really appreciate your comments on this topic.
Also I apologize ahead of time if my explanation is not clear to you.
</pre>


Thanks in advance.

Regards,

Rizwan.

In my opinion, DAO pattern would be suitable for you. Generally the DAO (Data Access Object) will have the CRUD (create, read, update, delete) methods to retrieve data from data-source (e.g. database). Based on the data it will create the DTOs (Data Transfer Objects) and pass them to the caller. It will also receive the DTOs from the caller and save it the data-source. Thus in your case you can
- remove the CRUD methods from the Business Objects (BO) and make them pure DTOs and use them with DAOs (If you are using JDBC codes inside your application and you don't have much of validation or processing logic in your BOs).
http://www.corej2eepatterns.com/Patterns2ndEd/DataAccessObject.htm
OR
- use BOs in combination in DAOs (if using the database connection from a pool and BOs are having complicated processing logic).
http://www.corej2eepatterns.com/Patterns2ndEd/BusinessObject.htm

HR data transfer toolkit_ SAP Best practice

Hi All,
I got to know the New toolkit for HR Data Transfer in which SAP has provided the Built in Excel sheets for the certain Infotypes..I got the document through online. But am not able to use the transactions ..can any one help me out ..from where do i download the HR Data transfer toolkit and if any patches which i have install in the system.
Can you please help me out in giving me the Links.or steps from where do i donwload the toolkit.
Advance thanks for the help.
Regards
Rajeshwar

Rajesh,
You have to request basis to apply the sar file that is specified in best business practise documentation.
Also note that data transfer tool for ECC 6.0 is different from ECC 5.0 or R/3.
The data transfer tool is now (in ECC 6) shifted to LSMW.
regards
Sridhar

Data transfer from E-recruitment to PA

Dear All,
we are Implementing E-recruitment. while transferinf the data from E-recruitment to Personnel administraion, I am getting the error, No data available from the partner system table T752F). We are using the same server for E-rec and PA.
While doing the data transfer activity in E-recruitment i m getting succfulll. In R/3 while going to the Tcode PA48 i m getting the error.
Please help me on this.
Thanks and Regards,
Revathi.

An integrated hiring (data transfer) scenario with SAP e-recruitment
and R/3 starts with creating a "Data Transfer for New Employees"
activity within e-recruiting for the candidate selected to be hired.
Data from e-recruitment is transferred to the target HR (via an RFC
call) and stored there in a holding table (T572F) for processing
by an appropriate action. Within the HR system, execute transaction
PA48 to access the holding table. Select the candidate you want to
process and then click the "Hire" button, and continue with the
appropriate action.
This message occurs, if you execute PA42 or PA48, in order to perform
the personnel action RA (Integration with Recruitment in Partner
Systems) and no data exists on the R/3 or external system.
You will find all the relevant information in the IMG documents
available. Please check;
- Set Up Data transfer from SAP ECC
- Set Up Data Transfer for New Employees

Field symbols not working in data transfer VOFM routine

Hi,
I have been trying to set a value using field symbols, however for some reasons its not working. I am using a field symbol in a data transfer routine and the value which I am trying to set is a standard field outside the VOFM routine code.
I am trying to set a field gla_subrc which is actually a changing parameter.
The actual paramter is gn_subrc of type sy-subrc and within the form the name is gla_subrc. I need to set this changing parameter gla_subrc using the data transfer routine.
Is there a specific rule that field symbols dont work for changing paramters within subroutine or is there a specific syntax.
The syntax I am using is
ASSIGN ('(SAPLV50S)gla_subrc') to <fs>.
I also used the local program name instead of main program but still that does not work. Tried using the actual parameter as well.
Can someone please help me in this.
Thanks & Regards,
Naresh.

I need to stop outbound delivery creation against STO using vl10b transaction. The only way to stop creation is using data transfer delivery VOFM routine.
If i give an error message MESSAGE E001, this will give a hard error which is not acceptable. To avoid this, i use a perform message statment with message id and certain parameters which can displayed in a log.
However to make sure this message is displayed in log, I am clearing a work area having specific data needed for delivery creation.
Because of this clear, my error message gets captured in log but along with this another fake message is displayed in log which caused by the clear message.
The user gets confused as he now sees 2 messages, 1 which is correct and other 1 which is fake and that confuses him.
Data transfer routine is not the best place to give messages in log but we have very few options. The only way the system can give 1 message is if i set gla_subrc to 1. This is a variable which will help the system understand that the delivery should not be created as there is something wrong because the value is 1. Hence it will stop the creation and instead display whatever message i had passed to the log.
I need to somehow set this variable to 1 based on lot of analysis that has been done in the past.
Please let me know if there is any way by which we can fix this.
Thanks & Regards,
Naresh.

Data Transfer Erec and ECC HR

Similar Messages

Maybe you are looking for