Data Uploads done with one User Id not visible to other users in SPM

Hi,
Data uploads were successfully carried out by one of the SPM users. However, other users (with different user id) are not able to see anything in the Data Upload Summary screen.
Is there a restriction on the visibility of Data Upload Summary for data uploads carried out with one User id to other users in SPM? A similar behaviour is observed for other screens within the Data upload workbench.
Incase this is not the expected behaviour, it would be great if you could please provide pointers to possible reasons for this.
Just for your information, all users have been granted same privileges in the SPM application.
Thanks in advance.
Regards,
Ashish Sharma

Hi Ashish,
No this is not the expected behavior. We have seen this issue for other customers in the past but the reason has always turned out to be role related.
Can you ensure that the required SPM roles are assigned to the user who do not see the DM data both in ABAP as well as portal.
Thanks,
Divyesh

Similar Messages

Initiator Task not visible to other users in the Group

Hi
JDeveloper 11.1.1.6, WLS 10.3.6, BPM 11.1.1.6
I have a Process and the swimlane containing the Initiator Task is assigned to a Group.
All the users in the group are able to Initiate the Task.
But when the Task is initiated, the Task is assigned to the User specifically, but not to the Group. I guess this is the default behavior.
The Human Task Assignee - defaultPerformer for the Initiator Task is uneditable in the initiator.task file.
What I was expecting is that, since the Initiator swimlane is assigned to the Group, All the users in the Group should be able to see the Tasks initiated by anyone in the Group.
I want this behavior in the Initiator type of tasks specifically. (The normal Tasks other than Initiator tasks are working as expected.)
The reason why we want this is, let us say after the task is created, and before it is submitted, there is a lot of work to be done, for example, data entry, should be done by many people in the Group.
If all the users in the Group are able to see the Initiator Task, then it will help to share the responsibility of data entry among the users of the group.
I tried Reassigning the task to Group, and it works, but we am looking for something automatically assigning to the Group when the Process is created. (We may not be using the Oracle BPM Workspace at all).
Can anyone please tell us if there is a way to make the Initiator Task automatically assigned to the Group instead of just the user?
Thanks for any help
Sameer

Hi Ashwini
Thanks for replying.
I did the same and it was working for me even if the Type is Single.
I just gave the Group name and all users were able to see the task. This is fine with me.
I just observed one more thing.
When the task is created, all the users in the Group are able to see it in 'Me & My Group'.
But the data entered by the creator is not seen by other users.
There is an action 'Save' in the Task. If the creator clicked on it, then the task is automatically 'Acquired' by the creator.
Other users in the group are able to see the task and the saved data, but are not able to Submit.
What I expected the Save button to do is only to Save the data in the Payload. Not Claim it.
Is there a way to make the payload data only to save but not to claim the task?
Thanks and Regards
Sameer

Public Foler Calendar Categories not Visible to Other User

My company uses calendars within the public folders for staff to be able to check their schedule.
When I add an event to one of those calendars, and change the category colour, I can see it, but none of the other users accessing the calendars can see them. It shows any text changes I've made, but no category. If those users open up the event, the category
name is even showing as selected, but the colour doesn't actually show up.
Any ideas?

Hi,
There is no feature in Exchange server to manage calendar view in Outlook. Based on my research, it seems a known issue that Outlook does not recognize or coexist with color category in the public calendar folders since Outlook 2007.
If you want to see the same colored categories on all of your computers, you must create the same categories and colors on every computer. The following article is about share color categories for Outlook 2010:
http://blogs.technet.com/b/outlooking/archive/2012/02/03/how-to-share-color-categories-for-outlook-2010.aspx
Here are some similar threads about public calendar color categories:
http://social.technet.microsoft.com/Forums/en-US/0ed65440-ecf8-43f8-8e06-599d57674627/exchange-2010-public-calendar-category-colors?forum=exchange2010
http://social.technet.microsoft.com/Forums/en-US/6ede7f1b-d8dd-41e6-a5db-b9f58d1bbf86/outlook-public-folder-calendars-not-syncing-category-colors?forum=outlook
Thanks,
Winnie Liang
TechNet Community Support

Shared Tasks not visible to other User

Hello,
I am facing a problem that I have shared Tasks of User-A to User-B. But when I open shared Task at User-B MS Outlook it opens but no tasks of User-A are visbile.
For Testing
I Shared User-A shared tasks for myself with same permissions & are visible to me.
I Shared my Tasks for User-B & are visible to User-B.
I Shared User-B Tasks & are also visible to me.
I Created new Outlook profile for User-B, Upgraded Office Version from 2007-2010, Created new Windows login Profile, login him on some other PC but still User-B is unable to View User-A shared tasks.
I login User-B on OWA (Webmail) still User-B is unable to View User-A shared Tasks.
I have checked for User Mailbox permissions but found nothing.
Please help me to resolve this issue.

Hi,
If User-A shared a calendar folder to User-B, could User-B open the shared calendar in his Outlook? or are those calendar items visiable in that time?
If yes, please separately get the
Get-MailboxFolderPermission -Identity
[email protected]:\Calendar
& Get-MailboxFolderPermission -Identity
[email protected]:\Task
And then compare their permission to find the difference entry.
Or you may directly check the User-B's permission under User-A's folder:
Get-MailboxFolderPermission -Identity
[email protected]:\Task -User [email protected]
This might not the problem on User Mailbox permissions level but Mailbox folder permissions level. Thanks.
Tony Chen
TechNet Community Support

SubArea not visible for other users in ESS

Hi All,
I have created a new subarea (having few services) and assigned it to a Benefits and payments Area.
Now the issue is its only displaying to Administrator Role not for other users.
if iam giving SAP_ALL to other user then we are able to see this.
Please let me know if iam missing anything .
Thanks,
Santosh

to the role assigned to the user, you need to select end user visible in the role.
note Number              939412
ssign the following permissions to an End user.
   o Goto Content Administrator ->Portal content ->Content Provided by
      SAP ->End User Content -> Employee Self Service
   o Right click on Employee Self Service. select open-> Permissions
   o Assign read authorization to default user group "everyone".
   o Check the 'EndUser' checkbox
   o Save the Assigned permissions
   o Goto System administration -> Permissions.
                                                                Page 2
   o Goto Portal content ->Content Provided by SAP ->srvconfig
   o Assign read authorization to default user group "everyone".
   o Check the 'EndUser' checkbox
   o Save the Assigned permissions.

My microsoft account is not visible by other user

Hi,
Nobody can see find my miscrosoft account in Skype.
Is there hidden button where I can make my microsoft account Id visible in search results?
Thanks
Andrew

No, they can't.
Only by Skype Id.
And this is quite a problem for me

Message no visibility for other users

Since I started working with Message Beta my account visibility for other users is offline.
With 'the old' iChat my online status was visible to other users.
With Message however non of my chatfriends can see that i'm online even if my status shows online and visible in Message.
The only thing other friends see is that i'm offline!
Who knows the answere?

Hi,
If you have multiple accounts/Buddy lists go to the Messages Menu > Preferences > General Section and use the item to unlink the Buddy Lists
Now check each one and also the setting to make them all the same.
If that does not work try Deleting the Account and then re-adding it/them
10:22 PM Friday; April 13, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I upgraded my iphone to 5.0.1 and ever since, it has decided to delete old text messages. Only with one contact though, not everybody. So for every new text message I send this person, an old one gets removed. Why? I don't want this to happen.

I upgraded my iphone to 5.0.1 and ever since, it has decided to delete old text messages. Only with one contact though, not everybody. So for every new text message I send this person, an old one gets removed. Why? I don't want this to happen.

Connect the phone directly to the computer, not a hub.
Disconnect all other USB devices except keyboard and mouse.
Disable your firewall
Disable your antivirus
In iTunes if it recognizes the phone click "Restore"
If it doesn't recognize the phone:
Disconnect the phone from the phone end, leave the USB cable plugged into the computer
Hold the HOME and SLEEP buttons until the screen turns black, excactly 10 seconds, then release the SLEEP but continue holding the HOME (If an Apple logo appears you have held SLEEP too long; do it over)
While holding HOME connect the cable to the phone
As soon as iTunes recognizes the phone release the HOME button and it should restore.
If neither procedure works note the exact error message and post it.

HT204065 Group text with one non iPhone not working on iPhone 6 in the group.

Group text with one non iPhone not working on one iPhone 6 in group. SMS, MMS and iMessage as well as group messaging are all turned on. Has worked intermittently but now cannot see or respond in that particular chain. Can send independently to the non iPhone (Samsung) but not in group. Other iPhone 6 and 5 in group work fine.

The reason why you have to turn off 3Gs is because T-Mobile does not support iPhones 1700 something or other. You have to turn off the 3Gs on the iPhone to make it work.
As already provided, it shouldn't matter since the iPhone is designed to automatically connect to the fastest internet connection available. If wi-fi access and 3G network access is on, when in range of an available wi-fi network you have access to and have connected your iPhone with previously, the iPhone will connect to the wi-fi network automatically. When leaving the range of the wi-fi network, the iPhone will connect to the 3G network if 3G network access is available. If 3G network access is not available, the iPhone will connect to EDGE or GPRS - whichever is available at the time.
If this is unique to T-Mobile's network with the iPhone for some reason since T-Mobile is not an official carrier for the iPhone in the U.S. and you were instructed by T-Mobile to do so, then you need to do so.
If this is not working now, the problem lies with T-Mobile and I have no idea what to tell them for them to recognize where the problem lies on their end.

One user from AD is not visible in portal user administration

Hi,
one of our users defined in Active Directory is unable to log into the portal. We have Kerberos authentication.
I've checked this user is also not visible in portal user administration. The rest of the users are visible and are able to log in.
Any ideas what could be the cause?
Maybe some settings/attributes for this user on the Active Directory side could be the cause?
Regards,
Ladislav

Hi,
Could you please check and confirm if the user,group path are the same for the
particular user on AD as that referred to by the portal. If not he would not be on the portal and
then there would not be kerberos too in place for him.
Rgds

After transport changes are not reflecting to other users

HI all it's urgent
One user abcd who had made some changes to some screens is not reflecting to other users after transport we have 2 clients 100 and 200 changes are reflecting in own user id we transported with scc1 transaction
with regards
vinod

I am not a developer, so pardon me if I misunderstood this question. I thought screens and other repository objects are client independent. That means the change should be evident in all clients without a need to transport.
Is this to do with security by any chance ( though it seems unlikely )? Can the other users see the change in the original client in which the request was made? That should help you determine whether the problem lies with the transport or outside. Also you can check the contents of the transport in SE01 and see if it holds the kind of data that you are expecting it to. I am guessing you have already generated the screen after saving the changes.
Hope this helps,
Sanket

Changes are not reflecting in other users

HI all it's urgent
One user abcd who had made some changes is not reflecting to other users after transport, we have 2 clients 100 and 200 ,changes are reflecting in own user id ,we transported with scc1 transaction
with regards
vinod

Dear Vinod,
Can you explain what did you try to do ? what changes do you make ?
Dimitry

Services for object box not visible for some users

Dear All,
PM module experts please help. In equipment master transaction IE02 in left hand top corner we get box for SERVICES FOR OBJECT which is useful for attaching external documents like word and excel. but problem is it is not visible for some users. Our security/authorisation team has also done some check but didn't get any solution.
anybody knows the reason why there is no box availabe?
Thanks
SR

Dear Siddhartho Raha
I think this problem related ABAP work,this problem very general problem,first refer any note availble or search throgh any class in SE24
note are like this way 492331,this is not related to your query but same like it is and also may be
Due to an error in the coding, it was possible to link a Word document to a Document in IE01. Because the data cannot be saved in transaction IE01, the linked document is lost after leaving the transaction.
Hope this may helps you
Prem.

HELP!! WRT54G2 works for one computer, but not for the other

I have a WRT54G2 and it is connected to 2 computers. The internet works in one computer, but not on the other. The tech support said i needed to configure it or firmware or something like that. But my product is out of warranty and I really need the internet on the other computer as well. Please Help!!!

As your one computer is working fine then there is no problem with the router so far...
The computer which is not working...check the IP Address on that...
Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
If yahoo times out then provide static DNS on your LAN Connection...
Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local Area Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online...

Price should not be visible to other user's in sales order..

hi friends ...
my client requirement :
price should not be visible to other user's in sales order level, it should be visible after invoice only ...
eg : gurgoan user should not be able to see the sales order price of hyderabad user raised sales order ... but gurgoan user should able to raise the sales order for his customer ..
plz reply me in detail with configuration steps .... thanks in advance ....

Hi
If you are talking about pricing condition control through authorizations in sales transaction VA01, VA02 etc. - please check SAP Note 105621: Suppressing display of Sales Order Conditions.I would suggest that you search for this auth object and note and work accordingly) and it shall enable you to restrict display to specific conditon type (for example VPRS: cost).
For this you need to know the pricing procedure and step number relevant to your sales order. Please seek guidance from functional consultant on it.
Secondly as you want to restrict access on geography you have to use org level controls as applicable along with the above auth object.
Hope this helps
Prashant

Data Uploads done with one User Id not visible to other users in SPM

Similar Messages

Maybe you are looking for