One user from AD is not visible in portal user administration

Hi,
one of our users defined in Active Directory is unable to log into the portal. We have Kerberos authentication.
I've checked this user is also not visible in portal user administration. The rest of the users are visible and are able to log in.
Any ideas what could be the cause?
Maybe some settings/attributes for this user on the Active Directory side could be the cause?
Regards,
Ladislav

Hi,
   Could you please check and confirm if the user,group path are the same for the
particular user on AD as that referred to by the portal. If not he would not be on the portal and
  then there would not be kerberos too in place for him.
Rgds

Similar Messages

  • NEF files from Nikon d800 not visible in bridge and photoshop cs6- using mac ver.10.8.5. downloaded plugin from site 8.3 but issue unresolved

    NEF files from Nikon d800 not visible in bridge and photoshop cs6- using mac ver.10.8.5. downloaded plugin from site 8.3 but issue unresolved

    You can install and use Camera Raw 8.8 with OSX 10.8  Go to Help > Updates in Photoshop CS6

  • SP 2010-After adding user from IIS is not found in central admin

    Hi Experts,
    I am trying to configure my SP 2010 with Form Based Authentication.
    After configuring WebSite, STS and Central Admin I added the user from IIS , But not able to found from central admin in Form Authentication.
    I checked in database the user is added.
    I followed the below blog .
    http://jasear.wordpress.com/2012/03/16/sharepoint-2010-setting-up-form-based-authentication-fba-using-asp-net-sql-membership-provider/
    Can experts help me how to get the added user to central admin.
    Thanks
    AshisK

    I was finally able to get the FBA working. After many failed attempts, I knew there was a configuration issue which was causing the error.
    I provided connection string and provider details at 4 places, instead of the 3 mentioned  in various blogs around ->
    1. Sharepoint Central Admin
    2. Sharepoint Web Services
    3. SecurityTokenServiceApplication
    4. And finally the web application itself.
    The connection string for 2nd and 3rd will remain same however, provider details need to be added.
    After completing this step, I was able to login using Form Based Authentication without an issue.
    AshisK

  • Services for object box not visible for some users

    Dear All,
    PM module experts please help. In equipment master transaction IE02  in left hand top corner we get  box for SERVICES FOR OBJECT which is useful for attaching external documents like word and excel. but problem  is it is  not visible for some users.  Our security/authorisation team has also done some check but didn't get any solution.
    anybody knows the reason why there is no box availabe?
    Thanks
    SR

    Dear Siddhartho Raha
    I think this problem related ABAP work,this problem very general problem,first refer any note availble or search throgh any class in SE24
    note are like this way 492331,this is not related to your query but same like it is and also may be
    Due to an error in the coding, it was possible to link a Word document to a Document in IE01. Because the data cannot be saved in transaction IE01, the linked document is lost after leaving the transaction.
    Hope this may helps you
    Prem.

  • New fields created in MDM Console not visible on Portal iViews

    Hi All
    I would like to ask you. I recently encouraged very strange and annoying problem. We are developing Vendor repository. Menatime we have created some iViews and pages on the Portal. All of them are displayed from Main table. We can see all fields and added/deleted records.
    However I can not add any new fields (from MDM Console main table) we have created. That is whired because I only can see all fields beeing in repository for long time now, but all new fields (from that same table) ar not visible on portal.
    I tried few options with creating new and different iViews. No help. All the time I can vise old fields from repository but new one are not available.
    Can you plase advice what is/ may be wrong?
    Thank you in advance.
    BR
    Rafal

    Hi All
    After restarting server problem solved. That mean there is a casching problem. After investigation here is service to restart:
    J2EE engine
    Thank you for help.
    BR
    Rafal
    Edited by: Rafal Paczynski on Sep 29, 2011 12:21 PM

  • New to the Apple and I want to set up a user account that will not delete the guest users files and allow and preserve their personal settings after log out. Is this possible?

    New to the Apple and I want to set up a user account that will not delete the guest users files and allow and preserve their personal settings after log out. Is this possible?

    The built-in guest user account will not do this. Simply create a new standard account and call it "Guest" or "Guest Users" or whatever you like.
    Go to System Preferences > Users& Groups, click "+" to make a new account.

  • How can i know iphone users from contacts, how can i know iphone users from contacts

    how can i know iphone users from contacts, how can i know iphone users from contacts

    You could open that contact in messages, and your iPhone should say "iMessage" instead of "Message" in the text field. However, this depends wether the contact has iMessage enabled, but it could also mean the contact is using an iPad or iPod touch.
    Make sure that their mobile number is in iMessage, and if the text field says "iMessage", then they are using an iPhone (if they've enabled it).

  • SAP RM: How can I create a Node when the node is not visible for the user

    Hi,
    Product: SAP records Management for Public Sector
    Version: 7.00
    is it possible to create a instance node when the model not is not visible for the active user?
    I looked in the CL_SRM_XML_REC_MODEL but every methode I used gave me no results with the special user.
    Regards and thanks for every beginning
    Fanninger Thomas

    Hi,
    here an example.
    When I use the method CL_SRM_XML_REC_INSTANCE->IF_SRM_XML_POID~GET_ALL( POID_TAB COUNT_USER_REST COUNT_POID_AUTH ).
    When I used the user with no right for viewing the invisible nodes I get no elements in the tabelle POID_TAB and 38 in the value COUNT_USER_REST.
    So did any one know a solution you can I create a nodes and change the restriction for the new node with the normal user?
    Regards
    Fanninger Thomas
    Edited by: Thomas Fanninger on Feb 5, 2008 8:15 AM

  • Shared Tasks not visible to other User

    Hello,
    I am facing a problem that I have shared Tasks of User-A to User-B. But when I open shared Task at User-B MS Outlook it opens but no tasks of User-A are visbile.
    For Testing
    I Shared User-A shared tasks for myself with same permissions & are visible to me.
    I Shared my Tasks for User-B & are visible to User-B.
    I Shared User-B Tasks & are also visible to me.
    I Created new Outlook profile for User-B, Upgraded Office Version from 2007-2010, Created new Windows login Profile, login him on some other PC but still User-B is unable to View User-A shared tasks.
    I login User-B on OWA (Webmail) still User-B is unable to View User-A shared Tasks.
    I have checked for User Mailbox permissions but found nothing.
    Please help me to resolve this issue.

    Hi,
    If User-A shared a calendar folder to User-B, could User-B open the shared calendar in his Outlook? or are those calendar items visiable in that time? 
    If yes, please separately get the
    Get-MailboxFolderPermission -Identity
    [email protected]:\Calendar
    & Get-MailboxFolderPermission -Identity
    [email protected]:\Task
    And then compare their permission to find the difference entry.
    Or you may directly check the User-B's permission under User-A's folder:
    Get-MailboxFolderPermission -Identity
    [email protected]:\Task -User [email protected]
    This might not the problem on User Mailbox permissions level but Mailbox folder permissions level. Thanks.
    Tony Chen
    TechNet Community Support

  • Initiator Task not visible to other users in the Group

    Hi
    JDeveloper 11.1.1.6, WLS 10.3.6, BPM 11.1.1.6
    I have a Process and the swimlane containing the Initiator Task is assigned to a Group.
    All the users in the group are able to Initiate the Task.
    But when the Task is initiated, the Task is assigned to the User specifically, but not to the Group. I guess this is the default behavior.
    The Human Task Assignee - defaultPerformer for the Initiator Task is uneditable in the initiator.task file.
    What I was expecting is that, since the Initiator swimlane is assigned to the Group, All the users in the Group should be able to see the Tasks initiated by anyone in the Group.
    I want this behavior in the Initiator type of tasks specifically. (The normal Tasks other than Initiator tasks are working as expected.)
    The reason why we want this is, let us say after the task is created, and before it is submitted, there is a lot of work to be done, for example, data entry, should be done by many people in the Group.
    If all the users in the Group are able to see the Initiator Task, then it will help to share the responsibility of data entry among the users of the group.
    I tried Reassigning the task to Group, and it works, but we am looking for something automatically assigning to the Group when the Process is created. (We may not be using the Oracle BPM Workspace at all).
    Can anyone please tell us if there is a way to make the Initiator Task automatically assigned to the Group instead of just the user?
    Thanks for any help
    Sameer

    Hi Ashwini
    Thanks for replying.
    I did the same and it was working for me even if the Type is Single.
    I just gave the Group name and all users were able to see the task. This is fine with me.
    I just observed one more thing.
    When the task is created, all the users in the Group are able to see it in 'Me & My Group'.
    But the data entered by the creator is not seen by other users.
    There is an action 'Save' in the Task. If the creator clicked on it, then the task is automatically 'Acquired' by the creator.
    Other users in the group are able to see the task and the saved data, but are not able to Submit.
    What I expected the Save button to do is only to Save the data in the Payload. Not Claim it.
    Is there a way to make the payload data only to save but not to claim the task?
    Thanks and Regards
    Sameer

  • Not able to display users from Opneldap in Weblogic 8.1 Portal Admin

    Hi
              I had configured openldap for multiple authentication in weblogic 8.1. I am able to see users and groups from openldap in weblogic admin console but when i go to Portal Administration i am not able to see those users and groups. Also as per weblogic documentation it says that Authentication provider selection is shown automatically in Portal Admin. Also i am able to log to portal application from openldap users.
              I want set entitlements using Portal Admin for openldap users
              Can anyone suggest how to make it work.

    Hi
              I had configured openldap for multiple authentication in weblogic 8.1. I am able to see users and groups from openldap in weblogic admin console but when i go to Portal Administration i am not able to see those users and groups. Also as per weblogic documentation it says that Authentication provider selection is shown automatically in Portal Admin. Also i am able to log to portal application from openldap users.
              I want set entitlements using Portal Admin for openldap users
              Can anyone suggest how to make it work.

  • Variables from workbook are not visible in the Planning function

    Hi,
    We're using a workbook with a bunch of queries in it. Every query has a lot of variables declared that are calculated based on two input ready variable that users are required to fill the first time.
    Everything works as expected until the save data function is called, which in turn calls the planning function.
    Here, the user exit variable try to be recalculated again. Unfortunately, this planning function loses track of the two input ready variables that were on the workbook, so the user exit variables have no values.
    Can you please suggest a method so that:
    a) The user exit processing in the planning function "sees" the two input ready variables
    b) The user exit processing is not triggered in the planning function and it's taking the already calculated values
    Let me know if you require further information.
    Best regards,
    George

    Hi,
    the variables in the filter of the query lives in one variable container and the variables of the filter of the planning sequence live in another variable container. They do not know each other. You need to establish a relationship between them. Usually this is done via variable binding for regular variables. For exit variables the variable binding can be done as written above.
    If as in your case you have variables in the filter of the query and you want to use their values in the variable of the planning sequence than you need to store the values somewhere where you can retrieve them in the exit. This can be in a e.g. in shared memory or in the session memory. To do this you need to spend an extra exit variable in the filter of the query. The exit variable reads the real values and stores it somewhere (e.g. shared memory, global parameter of a function group, a class member or something similar). Now as the variable value is stored it can be read in the implemenation of the exit variable in the filter of the planning sequence.
    In total we have 3 variables:
    Variable 1 contains the value which the user keys in and exists in the filter of the query.
    Variable 2 reads variable 1 and stores the value. It needs to be defined in the filter of the query as well.
    Variable 3 reads the stored value and needs to be defined in the filter of the planning sequence.
    Regards Matthias Nutt
    SAP Consulting Switzerland

  • CRM Users Created on ABAP Stack not visible in Portal...........

    Hello All,
            I have WAS with ABAP + JAVA  [EP7], Hence using <b> dataSourceConfiguration_abap.xml</b>. as a datasource file in UME.
    As per my knowledge i cant create users from Portal hence I have created users in ABAP Stack but I am not able to view these users from Portal ?
    I have chaecked the entry in Configtool this file is maintained as Datasource.
    Please Guide me what may be the reson for this ??
    Is it possible to add Users from portal if Datasource is ABAP Stack ??
    Waiting for reply!
    Thanks,
    Smita.

    Hi Smita,
    Please go through these links:
    UME configured to use SAP ABAP
    For the configuration using config tool : http://help.sap.com/saphelp_nw04/helpdata/en/49/9dd53f779c4e21e10000000a1550b0/frameset.htm for general remarks using this config and see http://help.sap.com/saphelp_nw04/helpdata/en/0f/bdd93f130f9115e10000000a155106/frameset.htm for changing the config.
    Check out the section "Read-Only and Read-Write Access to the ABAP User Management.
    This link would also be useful. This link talks about <b>User Management of Application Server ABAP as Data Source</b> :  http://help.sap.com/saphelp_nw2004s/helpdata/en/49/9dd53f779c4e21e10000000a1550b0/frameset.htm
    Hope this helps.
    Regards,
    Sunil

  • Dashboard data not visible for the users - buffer issue?

    It occurred several times last weeks that some out of 7 dashboards are not visible to the Dashboard users.
    The scenario is the same all the time: users fills in the data, reviews it and posts some comments. Next morning the user canu2019t see the data in the system.
    What can be the problem?

    Hi,
    IF your Company has NEtweaver License and the SAPNET User has access right to download section, you must be able to add SP Stacks to Download Basket.
    If you have license and use have access, then please contact with local SAP Subsdiary for this problem.
    But to be able to download some patches, you must have Solution Manager & Maintanance Optimizer to approve the items in basket.

  • System DSN not visible to 'domain users', why??

    We have a Windows Server 2012 R2 Remote Desktop Services RDS farm.
    I set up a 32-bit *system* DSN properly with the 32-bit ODBC app for Crystal Reports 2011, a 32-bit app.
    When a domain user opens CR the newly created DSN does not appear in CR, though it appears for an admin user.
    Why is the system DSN not visible to the domain users per se??
    I checked the proper registry item and gave 'Domain Users' read permission to it, still no work.
    Certain users need to see the DSN so they can configure the report to talk to the proper server, database, etc.
    System DSNs are supposed to be visible/usable to all users.
    What should I do??
    Thank you, Tom

    FWIW some other DSNs are visible to CR2011 but nothing we can use, they were somehow automagically created during installation of other software stuff.
    I've tried every way I can think of to install the DSNs (different providers, different accounts) but I still can not get the desired DSN visible to my domain user login after opening a Crystal Reports 2011 report and clicking 'change database location'...
    I thought about and tried using a DSN-less connection string but that did not go very far...it would be usable, people could type in ID and password if they must, but I could not get it to even let that happen...I also did not quite know what the string
    should be, the database itself is SQL Server 2012 (11.0), I don't know the exact version OTOH.
    The Remote Desktop Services Hosts are all Windows 2012 R2...could that be the cause of the problem?? Every other server I've put system DSNs was 2003 or 2008...
    Thank you, Tom

Maybe you are looking for