Database configuration in CMC

Hello,
My question is about database configuration in CMC. Which option
1) Use original database to logon 
2) Use custom database to logon
should be used? And what is the difference between them?

Option 1(Original database logon) contains the connection data for the data source used when the report was set to access in the CR designer when it was exported into your BOBJ repository.
Option 2 (Custom) allows you to override the original data source and fetch data from another database or by using other connection parameters.
You can use which ever option fits your needs.
Regards,
Stratos

Similar Messages

  • Crystal Report Server: Cannot save Database Configuration in CMC

    I already posted this question as SAP internal CSN message (message number 1896093 2009) but did not get any answer so far.
    I have installed a test version (which I'd like to become permanent some     
    day...) of Crystal Reports Server 2008 on a local machine to be able to      
    share Crystal reports within our department.                                 
    I created a couple of reports which I would like to get updated              
    regularly. The issue is here that I get a logon screen to the underlying     
    SQL Server as soon as a user clicks on "Refresh" when viewing a report       
    from InfoView. The SQL Server is running on integrated security              
    via SSO, which I cannot change...                                            
    To get around this issue I would like to change the default Database         
    Configuration of the reports. Hence I do the following:                      
    1) I open the Central Mangement Console                                      
    2) I select one of my reports                                                
    3) Rightclick on Properties                                                  
    4) On the Default tab I select Database Configuration                        
    5) the config is set to "Logon Screen" and I ant to change this to SSO,      
    so I set this                                                                
    6) Now I click on Save                                                                               
    => The setting is reverted to the old "Logon Screen" settin1g                                                                               
    This behavior is the same for all the reports I'm using.                                                                               
    Looking forward to any help, kind regards                                    
    Wolfgang
    P.S.: Ultimately this issue arises, because I cannot refresh my crystal report data in batch job mode, because the reports are reading data from an SQL server, which allows SSO-logon (integrated security) only. Thus I have to open each and every report for update manually and click on the refresh button.
    Edited by: Ralf Wolfgang Geithner on Jul 3, 2009 11:00 AM

    Hi Manish,
    thanks for your answer. Unfortunately I'm still stuck in this matter.
    Does this happen with the sample reports too? I think it will be a good approach to try this to see if your system is behaving differently for sample reports and reports published from outside
    I did not really try this, but viewing and editing my reports in Crystal Reports 2008 Designer works perfectly fine. As well can the user view my reports in the InfoViewApp.
    Also, does it revert to the login screen setting immediately after you click Save or does it show the setting as changed after clicking Save but, does not retain it when you come back and check the report settings again?
    The data is reverted immediately after clicking "Save"
    Kind reagrds
    Wolfgang

  • Database Configuration problem

    I am brand new to Crystal (1 week) so bear with me please.
    I have created a crystal report from an access database. Although this access database doesn't have any security itself one of its tables is linked to a SQL server through ODBC. When i create a report in Crystal using the Access database it works great. When i publish this report to the server it wants some type of login information.
    Under Database configuration (CMC) for the report i seem to have two options.
    1)Use original database logon information from the report.
        Server = Location of my access database
        Database = ""
        User: ?
        PW:?
    or
    2) Use custom database logon information specified here.
         Select a database driver
        Server: ? Is this the SQL server or the server where my access database is contained?
         Database: ? same question
         User: ? Is this the sql user?
    I have tried both can't get it to work. What login information does it want? Does it want the sql login information? What am i missing? Any help would be great. I know this is a lot of questinons but i am stumped.
    thanks

    Hi Jesse,
    Because your .mdb file doesn't require a password, I would check if Page server can access to .mdb file first. When viewed from Enterprise, Page Server needs to be able to access to .mdb file. Where is .mdb file located? If it is on the network share, Page Server service needs to run under the user account which has access to the share. By default it is running under System Account.
    Test the report in Crystal Reports on the server(not from a client machine). If you can refresh it successfully, check what user account is logged on the server, then use the user account for Page serer service. Restart Page Server and test the report from Enterprise.
    Hitomi

  • Delete a specified data sorce in the database configuration

    Hi @all,
    I created  and published successfulyl a Crystal Report on a Business Objects D-System! In the database configuration of the these crystal report in the CMC, we use the option "Prompt the user for database logon".
    But it appears two data sources in the left box, where I can just modify some options, when I click on it.
    The first data source is an IP-adress of the DEV-System, which is obviously the meta-information of the Crystal Report.
    The second datasource is the AS, which I set in BW under the TC /crystal/rptadmin "Set BW source parameters".
    How can I delete the first data source with IP-adress?
    When I transport the Crystal Reports to the  Business Objects P-System, these IP-adress is still set as in the D-System and is not translated! How can I solve this problem?
    Best regards,
    Dirk

    Hi Ingo,
    I solve it by myself.
    The problem was the use of an function module. If I save the Crystal Report for the P-System, it runs and the IP-adress will be translate.
    Best regards,
    Dirk

  • How can i create a new and tableless database using database configuration

    How can i create a new and tableless database using database configuration

    How can i create a new and tableless database using database configuration
    Just don't install the sample schemas. See the installation guide
    http://docs.oracle.com/cd/E11882_01/server.112/e10831/installation.htm
    Using the Database Configuration Assistant
    When you install Oracle Database with the Oracle Universal Installer, the sample schemas are installed by default if you select the Basic Installation option. Selecting the sample schemas option installs all five schemas (HR, OE, PM, IX, and SH) in the database. If you choose not to install the sample schemas at that time, you can add them later by following the instructions in section "Manually Installing Sample Schemas".
    Choose a custom install and don't install the sample schemas.
    All other schems/tables installed are REQUIRED by Oracle

  • 10g installation stays at 45% during Database Configuration Assistant

    Hi,
    I am trying to install Oracle 10g in my windows XP machine.Installation goes on smoothly and the configuration assistant window appears.The Database Configuration Assistant page showing the progess bar for database creation also appears.The progress shows Clone database creation in progress at 45%. It has been running for more than 6 hours.
    What should i do? Can i stop and run Database Configuration Assistant independently? Is installation of all oracle database component complete?
    Please advice.
    Regards,
    Jay

    Hi,
    I have checked and the Oracle listener is started.The problem is still there.
    Where do i locate the files created during DBCA process? If there are any files left will they be replaced when i run DBCA independently?
    Please advice.
    Thanks.
    Jay

  • 8.1.5 Install Problem: Database Configuration Assistant

    I have problems installing Oracle 8.1.5 on Linux.
    On the "Configuration tools" screen, I get the following
    error for the 'Oracle Database Configuration Assistant':
    "A required command line argument is missing"
    The installation claims the error is not critical.
    When I try to access the database with SQL*Plus and the default
    SYS/CHANGE_ME_ON_INSTALL login, I get the following error:
    ORA01033: Oracle intialization or shutdown in progress.
    I cannot start or stop the database.
    When I use "connect internal" in srvmgr, and try to do "startup",
    I get "insufficient privileges".
    When I use "connect SYSTEM/CHANGE_ME_ON_INSTALL", I get ORA01033
    again.
    My system configuration:
    RedHat 6.0
    2x Pentium II 266
    192 MB RAM
    Java JRE 1.6.5
    Kernel 2.2.10
    Hints etc. appreciated.
    null

    I have exactly the same setup (ie 2.2.10 etc) with
    exactly the same error message on install. In fact
    as far as I can tell no database was created because
    of this error. I run the "dbassist" sepeartely after the
    install and I get :
    " JNLS Excetion:oracle.....
    Unable to find any National Character Sets.
    Please Check your Oracle Installation"
    This is a stock redhat 6.0 install with the addition
    of the redhat errata updates(ie enlightenment-0.15.5-36
    , X, kde etc) and kernel 2.2.10.
    Yes logged in as the "oracle" user which also has group
    dba priv.
    Michael (guest) wrote:
    : The default password for sys is change_on_install, not
    : change_me_on_install, although a regular "connect internal"
    : should still work regardless (it won't for future versions, but
    : in 8.1.5, it should still work at least). Are you logged into
    : the OS as the "oracle" account (or whatever you used as the
    : install account)? Is this user a member of the "dba" group?
    : Also, make sure the permissions/ownerships of the files are
    : correct--your umask should have been 022 on the install account
    : before the install. The install manual states the correct
    : permissions on important files, and ownerships should pretty
    much
    : all (if not all) be oracle:dba.
    : If a shutdown was initiated, was it long ago? Live Oracle dbs
    : can take a while to shutdown, but if this is a new install and
    : not live or anything, it shouldn't take that long.
    : Sven Neuhaus (guest) wrote:
    : : I have problems installing Oracle 8.1.5 on Linux.
    : : On the "Configuration tools" screen, I get the following
    : : error for the 'Oracle Database Configuration Assistant':
    : : "A required command line argument is missing"
    : : The installation claims the error is not critical.
    : : When I try to access the database with SQL*Plus and the
    default
    : : SYS/CHANGE_ME_ON_INSTALL login, I get the following error:
    : : ORA01033: Oracle intialization or shutdown in progress.
    : : I cannot start or stop the database.
    : : When I use "connect internal" in srvmgr, and try to do
    : "startup",
    : : I get "insufficient privileges".
    : : When I use "connect SYSTEM/CHANGE_ME_ON_INSTALL", I get
    : ORA01033
    : : again.
    : : My system configuration:
    : : RedHat 6.0
    : : 2x Pentium II 266
    : : 192 MB RAM
    : : Java JRE 1.6.5
    : : Kernel 2.2.10
    : : Hints etc. appreciated.
    null

  • Problem using template in database configuration assistant Oracle 10g

    Hi,
    I created a database using the database configuration assistant for Oracle 10g on a Windows Server 2003 box. The database I created worked perfectly, and I had saved it as a template so I could save some time when creating similar databases (which I have to do on occasion)
    When I try to use the template though, I get an error (at about 4% through the database creation) saying:
    ORA-01501: CREATE DATABASE failed
    ORA-09314: sltln: error translating logical name
    I'm creating this new database on the same server as the one I created my previous database on and NOTHING has changed on it, I did this just minutes apart and can duplicate it at will (just try and use a template)
    Heres the template file contents (KM1.dbt)
    <DatabaseTemplate name="KM1" description="" version="10.1.0.2.0">
    <CommonAttributes>
    <option name="ISEARCH" value="false"/>
    <option name="OMS" value="false"/>
    <option name="JSERVER" value="false"/>
    <option name="SPATIAL" value="false"/>
    <option name="ODM" value="false">
    <tablespace id="SYSAUX"/>
    </option>
    <option name="IMEDIA" value="false"/>
    <option name="XDB_PROTOCOLS" value="false">
    <tablespace id="SYSAUX"/>
    </option>
    <option name="ORACLE_TEXT" value="false">
    <tablespace id="SYSAUX"/>
    </option>
    <option name="SAMPLE_SCHEMA" value="false"/>
    <option name="CWMLITE" value="false">
    <tablespace id="SYSAUX"/>
    </option>
    <option name="EM_REPOSITORY" value="true">
    <tablespace id="SYSAUX"/>
    </option>
    </CommonAttributes>
    <Variables/>
    <CustomScripts Execute="false"/>
    <InitParamAttributes>
    <InitParams>
    <initParam name="O7_DICTIONARY_ACCESSIBILITY" value="TRUE"/>
    <initParam name="background_dump_dest" value="{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\bdump"/>
    <initParam name="compatible" value="10.1.0.2.0"/>
    <initParam name="core_dump_dest" value="{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\cdump"/>
    <initParam name="db_block_size" value="8" unit="KB"/>
    <initParam name="db_cache_size" value="24" unit="MB"/>
    <initParam name="db_create_file_dest" value="E:\oradata"/>
    <initParam name="db_create_online_log_dest_1" value="C:\Oradata"/>
    <initParam name="db_create_online_log_dest_2" value="D:\Oradata"/>
    <initParam name="db_create_online_log_dest_3" value="E:\Oradata"/>
    <initParam name="db_domain" value="JACOBSONCO.COM"/>
    <initParam name="db_file_multiblock_read_count" value="16"/>
    <initParam name="db_name" value="UDC7"/>
    <initParam name="db_recovery_file_dest" value="E:\UDC7\flash_recovery_area"/>
    <initParam name="db_recovery_file_dest_size" value="2048" unit="MB"/>
    <initParam name="java_pool_size" value="0" unit="MB"/>
    <initParam name="job_queue_processes" value="10"/>
    <initParam name="large_pool_size" value="8" unit="MB"/>
    <initParam name="open_cursors" value="1000"/>
    <initParam name="pga_aggregate_target" value="24" unit="MB"/>
    <initParam name="processes" value="150"/>
    <initParam name="remote_login_passwordfile" value="EXCLUSIVE"/>
    <initParam name="shared_pool_size" value="80" unit="MB"/>
    <initParam name="sort_area_size" value="65536"/>
    <initParam name="undo_management" value="AUTO"/>
    <initParam name="undo_tablespace" value="UNDOTBS1"/>
    <initParam name="user_dump_dest" value="{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\udump"/>
    </InitParams>
    <MiscParams>
    <databaseType>MULTIPURPOSE</databaseType>
    <maxUserConn>20</maxUserConn>
    <percentageMemTOSGA>40</percentageMemTOSGA>
    <customSGA>true</customSGA>
    <characterSet>WE8MSWIN1252</characterSet>
    <nationalCharacterSet>AL16UTF16</nationalCharacterSet>
    <archiveLogMode>false</archiveLogMode>
    <initParamFileName>{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\pfile\init.ora</initParamFileName>
    </MiscParams>
    <SPfile useSPFile="true">{ORACLE_HOME}\database\spfile{SID}.ora</SPfile>
    </InitParamAttributes>
    <StorageAttributes>
    <ControlfileAttributes id="Controlfile">
    <maxDatafiles>100</maxDatafiles>
    <maxLogfiles>16</maxLogfiles>
    <maxLogMembers>3</maxLogMembers>
    <maxLogHistory>1</maxLogHistory>
    <maxInstances>8</maxInstances>
    <image name="&lt;OMF_CONTROL_0>" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
    <image name="&lt;OMF_CONTROL_1>" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
    <image name="&lt;OMF_CONTROL_2>" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
    </ControlfileAttributes>
    <DatafileAttributes id="&lt;OMF_SNIKEB_DATAFILE_0>">
    <tablespace>SNIKEB</tablespace>
    <temporary>false</temporary>
    <online>true</online>
    <status>0</status>
    <size unit="MB">300</size>
    <reuse>false</reuse>
    <autoExtend>false</autoExtend>
    <increment unit="KB">-2</increment>
    <maxSize unit="KB">-1</maxSize>
    </DatafileAttributes>
    <DatafileAttributes id="&lt;OMF_SYSAUX_DATAFILE_0>">
    <tablespace>SYSAUX</tablespace>
    <temporary>false</temporary>
    <online>true</online>
    <status>0</status>
    <size unit="MB">120</size>
    <reuse>true</reuse>
    <autoExtend>true</autoExtend>
    <increment unit="KB">10240</increment>
    <maxSize unit="MB">-1</maxSize>
    </DatafileAttributes>
    <DatafileAttributes id="&lt;OMF_SYSTEM_DATAFILE_0>">
    <tablespace>SYSTEM</tablespace>
    <temporary>false</temporary>
    <online>true</online>
    <status>0</status>
    <size unit="MB">300</size>
    <reuse>true</reuse>
    <autoExtend>true</autoExtend>
    <increment unit="KB">10240</increment>
    <maxSize unit="MB">-1</maxSize>
    </DatafileAttributes>
    <DatafileAttributes id="&lt;OMF_TEMP_DATAFILE_0>">
    <tablespace>TEMP</tablespace>
    <temporary>false</temporary>
    <online>true</online>
    <status>0</status>
    <size unit="MB">20</size>
    <reuse>true</reuse>
    <autoExtend>true</autoExtend>
    <increment unit="KB">640</increment>
    <maxSize unit="MB">-1</maxSize>
    </DatafileAttributes>
    <DatafileAttributes id="&lt;OMF_UNDOTBS1_DATAFILE_0>">
    <tablespace>UNDOTBS1</tablespace>
    <temporary>false</temporary>
    <online>true</online>
    <status>0</status>
    <size unit="MB">200</size>
    <reuse>true</reuse>
    <autoExtend>true</autoExtend>
    <increment unit="KB">5120</increment>
    <maxSize unit="MB">-1</maxSize>
    </DatafileAttributes>
    <DatafileAttributes id="&lt;OMF_USERS_DATAFILE_0>">
    <tablespace>USER_DATA</tablespace>
    <temporary>false</temporary>
    <online>true</online>
    <status>0</status>
    <size unit="MB">5</size>
    <reuse>true</reuse>
    <autoExtend>true</autoExtend>
    <increment unit="KB">1280</increment>
    <maxSize unit="MB">-1</maxSize>
    </DatafileAttributes>
    <TablespaceAttributes id="SNIKEB">
    <online>true</online>
    <offlineMode>1</offlineMode>
    <readOnly>false</readOnly>
    <temporary>false</temporary>
    <defaultTemp>false</defaultTemp>
    <undo>false</undo>
    <local>true</local>
    <blockSize>-1</blockSize>
    <allocation>1</allocation>
    <uniAllocSize unit="KB">-1</uniAllocSize>
    <initSize unit="KB">-1</initSize>
    <increment unit="KB">-1</increment>
    <incrementPercent>-1</incrementPercent>
    <minExtends>-1</minExtends>
    <maxExtends>-2</maxExtends>
    <minExtendsSize unit="KB">-1</minExtendsSize>
    <logging>true</logging>
    <recoverable>false</recoverable>
    <maxFreeSpace>0</maxFreeSpace>
    <autoSegmentMgmt>true</autoSegmentMgmt>
    <datafilesList>
    <TablespaceDatafileAttributes id="&lt;OMF_SNIKEB_DATAFILE_0>">
    <id>1</id>
    </TablespaceDatafileAttributes>
    </datafilesList>
    </TablespaceAttributes>
    <TablespaceAttributes id="SYSAUX">
    <online>true</online>
    <offlineMode>1</offlineMode>
    <readOnly>false</readOnly>
    <temporary>false</temporary>
    <defaultTemp>false</defaultTemp>
    <undo>false</undo>
    <local>true</local>
    <blockSize>-1</blockSize>
    <allocation>1</allocation>
    <uniAllocSize unit="KB">-1</uniAllocSize>
    <initSize unit="KB">64</initSize>
    <increment unit="KB">64</increment>
    <incrementPercent>50</incrementPercent>
    <minExtends>1</minExtends>
    <maxExtends>4096</maxExtends>
    <minExtendsSize unit="KB">64</minExtendsSize>
    <logging>true</logging>
    <recoverable>false</recoverable>
    <maxFreeSpace>0</maxFreeSpace>
    <autoSegmentMgmt>true</autoSegmentMgmt>
    <datafilesList>
    <TablespaceDatafileAttributes id="&lt;OMF_SYSAUX_DATAFILE_0>">
    <id>-1</id>
    </TablespaceDatafileAttributes>
    </datafilesList>
    </TablespaceAttributes>
    <TablespaceAttributes id="SYSTEM">
    <online>true</online>
    <offlineMode>1</offlineMode>
    <readOnly>false</readOnly>
    <temporary>false</temporary>
    <defaultTemp>false</defaultTemp>
    <undo>false</undo>
    <local>true</local>
    <blockSize>-1</blockSize>
    <allocation>3</allocation>
    <uniAllocSize unit="KB">-1</uniAllocSize>
    <initSize unit="KB">64</initSize>
    <increment unit="KB">64</increment>
    <incrementPercent>50</incrementPercent>
    <minExtends>1</minExtends>
    <maxExtends>-1</maxExtends>
    <minExtendsSize unit="KB">64</minExtendsSize>
    <logging>true</logging>
    <recoverable>false</recoverable>
    <maxFreeSpace>0</maxFreeSpace>
    <autoSegmentMgmt>true</autoSegmentMgmt>
    <datafilesList>
    <TablespaceDatafileAttributes id="&lt;OMF_SYSTEM_DATAFILE_0>">
    <id>-1</id>
    </TablespaceDatafileAttributes>
    </datafilesList>
    </TablespaceAttributes>
    <TablespaceAttributes id="TEMP">
    <online>true</online>
    <offlineMode>1</offlineMode>
    <readOnly>false</readOnly>
    <temporary>true</temporary>
    <defaultTemp>true</defaultTemp>
    <undo>false</undo>
    <local>true</local>
    <blockSize>-1</blockSize>
    <allocation>1</allocation>
    <uniAllocSize unit="KB">-1</uniAllocSize>
    <initSize unit="KB">64</initSize>
    <increment unit="KB">64</increment>
    <incrementPercent>0</incrementPercent>
    <minExtends>1</minExtends>
    <maxExtends>0</maxExtends>
    <minExtendsSize unit="KB">64</minExtendsSize>
    <logging>true</logging>
    <recoverable>false</recoverable>
    <maxFreeSpace>0</maxFreeSpace>
    <autoSegmentMgmt>true</autoSegmentMgmt>
    <datafilesList>
    <TablespaceDatafileAttributes id="&lt;OMF_TEMP_DATAFILE_0>">
    <id>-1</id>
    </TablespaceDatafileAttributes>
    </datafilesList>
    </TablespaceAttributes>
    <TablespaceAttributes id="UNDOTBS1">
    <online>true</online>
    <offlineMode>1</offlineMode>
    <readOnly>false</readOnly>
    <temporary>false</temporary>
    <defaultTemp>false</defaultTemp>
    <undo>true</undo>
    <local>true</local>
    <blockSize>-1</blockSize>
    <allocation>1</allocation>
    <uniAllocSize unit="KB">-1</uniAllocSize>
    <initSize unit="KB">512</initSize>
    <increment unit="KB">512</increment>
    <incrementPercent>50</incrementPercent>
    <minExtends>8</minExtends>
    <maxExtends>4096</maxExtends>
    <minExtendsSize unit="KB">512</minExtendsSize>
    <logging>true</logging>
    <recoverable>false</recoverable>
    <maxFreeSpace>0</maxFreeSpace>
    <autoSegmentMgmt>true</autoSegmentMgmt>
    <datafilesList>
    <TablespaceDatafileAttributes id="&lt;OMF_UNDOTBS1_DATAFILE_0>">
    <id>-1</id>
    </TablespaceDatafileAttributes>
    </datafilesList>
    </TablespaceAttributes>
    <TablespaceAttributes id="USER_DATA">
    <online>true</online>
    <offlineMode>1</offlineMode>
    <readOnly>false</readOnly>
    <temporary>false</temporary>
    <defaultTemp>false</defaultTemp>
    <undo>false</undo>
    <local>true</local>
    <blockSize>-1</blockSize>
    <allocation>1</allocation>
    <uniAllocSize unit="KB">-1</uniAllocSize>
    <initSize unit="KB">128</initSize>
    <increment unit="KB">128</increment>
    <incrementPercent>0</incrementPercent>
    <minExtends>1</minExtends>
    <maxExtends>4096</maxExtends>
    <minExtendsSize unit="KB">128</minExtendsSize>
    <logging>true</logging>
    <recoverable>false</recoverable>
    <maxFreeSpace>0</maxFreeSpace>
    <autoSegmentMgmt>true</autoSegmentMgmt>
    <datafilesList>
    <TablespaceDatafileAttributes id="&lt;OMF_USERS_DATAFILE_0>">
    <id>-1</id>
    </TablespaceDatafileAttributes>
    </datafilesList>
    </TablespaceAttributes>
    <RedoLogGroupAttributes id="1">
    <reuse>false</reuse>
    <fileSize unit="KB">10240</fileSize>
    <Thread>1</Thread>
    <member ordinal="0" memberName="OMF_1_REDOLOG_MEMBER_0" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
    </RedoLogGroupAttributes>
    <RedoLogGroupAttributes id="2">
    <reuse>false</reuse>
    <fileSize unit="KB">10240</fileSize>
    <Thread>1</Thread>
    <member ordinal="0" memberName="OMF_2_REDOLOG_MEMBER_0" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
    </RedoLogGroupAttributes>
    <RedoLogGroupAttributes id="3">
    <reuse>false</reuse>
    <fileSize unit="KB">10240</fileSize>
    <Thread>1</Thread>
    <member ordinal="0" memberName="OMF_3_REDOLOG_MEMBER_0" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
    </RedoLogGroupAttributes>
    </StorageAttributes>
    </DatabaseTemplate>
    can anyone explain why I keep getting this error?
    Thanks

    Error:     ORA-9314
    Text:     sltln: error translating logical name
    Cause:     Internal buffer may have overflowed
    Action:     See OSD error accompanying this message
    Check alertlog and trace files.
    Message was edited by:
    FeNiCrC_Neil

  • Siebel database Configuration wizard unable to identify index tablespace

    Hi,
    I'm installing Siebel CRM 8.1.1 on AIX platform. We have RAC enabled database at backend and in that two tablespace has been created, one for data and another one for index. Now in the database configuration wizrd where we have to provide the name of both tablespaces; we provide the name of data tablespae in the Table Tablespace filed and index tablespace in the index tablespace filed of the configuration wizard. Now when we click on the next button. The configuration wizrd gives error of unable to identify index tablespace.
    Why is this happening as index tablespace is properly created in the database. Please help me in this. You quick respance will be highly appriciated.
    Regards,
    Abbasi

    I thought it might be. grantuser.sql generally needs to be modified to suit the underlying database configuration. Glad you got it working.

  • Security problem in oracle 9i Database Configuration Assistant

    Inside the tool Oracle 9i Database Configuration Assistant there is an option by which you can make a "copy" of your Database. This "copy" is called a template and you don4t need any password or aunthentication to do it, you just need the tool to be installed in your server. Once you have a template, you can bring it anywhere and recreate the original database (including data). Again, you don't need any password or aunthentication to do it, further more, in the last step of this process you can change the password of any user (inluding SYS, SYSTEM or another DBA user). The thing about this is that anyone with access to the computer where the database is can make a template of it, take this template to another computer and recreate my database having FULL access to it (structure, data, code ...). And everything without needing any password!!!. I really thing that it is a big problem. Is there any way of preventing this operation?. How can I safely protect my database?. I thought about unistalling the product, but someone can re-install it and everything would be the same. Can someone give me an answer?
    Thanks for everything.
    Pablo Cuenca

    You must protect your database from casual browsing at the OS level. This is not a security hole, per se, since this is a known issue with any and all software. Database Configuration Assistant is not needed for this since one may copy the database without it.

  • Database Configuration Assistant fails during instalation of Oracle EE 8.1.7

    My machine runs RH 6.2 and I have tried to install it Oracle. After executing all pre-instalation steps, I run ./runInstall and instalation process goes on. I select Typical Instalation and instalation proceeds until 100%, when OUI tries to configure Net 8 Assistant and Database Configuration Assistant. Both applications fail in this phase. Unfortunately, OUI shows a message (Database Configuration Assistant) informing that /u01/.../JRE/bin/jre does not exist. However, I have installed JDK 118 and JRE link seems correct, so that I can access JDK directory throught JRE link.
    HELP, HELP!!!
    Cheers,
    Andre

    some good installation guides to check out:
    http://www.akadia.com/services/ora_linux_install_901.html
    http://www.e-gineer.com/instructions/install-oracle9i-on-linux.phtml
    good luck!
    Jenny

  • Database Configuration Assistant fails during installation Oracle EE 8.1.7

    My machine runs RH 6.2 and I have tried to install it Oracle. After executing all pre-instalation steps, I run ./runInstall and instalation process goes on. I select Typical Instalation and instalation proceeds until 100%, when OUI tries to configure Net 8 Assistant and Database Configuration Assistant. Both applications fail in this phase. Unfortunately, OUI shows a message (for Database Configuration Assistant) informing that /u01/.../JRE/bin/jre does not exist. However, I have installed JDK 118 and JRE link seems correct, so that I can access JDK directory throught JRE link.
    HELP, HELP!!!
    Cheers,
    Andre

    some good installation guides to check out:
    http://www.akadia.com/services/ora_linux_install_901.html
    http://www.e-gineer.com/instructions/install-oracle9i-on-linux.phtml
    good luck!
    Jenny

  • Oracle 11g Database Configuration Assistant Hangs At 45% During 1st Install

    Platform: Windows Vista 64 Bit Version
    Downloaded: Oracle 11g Database 64 Bit
    Service Pack 1
    Greetings to all my Oracle Seniors. I have been attempting in vain to install the Oracle 11g database software package fully. I was able to complete the initial installation and made it to the second recommended action which was the Database Configuration Assistant operation. After 3 attempts, the progress bar stalled at 45%. I tried to look at the log file cfgtoologs (cloneDBCreation, and CloneRmanRestore), but it said that I didn't have permission. My pre-check cleared OK on everything. So, please direct me as to how to correct this issue.
    Thanks
    Preston
    System Integrator

    Well, that is not much of an option right now. I discovered that I have to reinstall the XP Pro OS after attempting the 11g installation 4 times and the install always stalled at 69% during the initial installation. I did have Windows Service Pack 3 installed on the system. I down graded and added 1 G of additional memory and checked the pre-check with no problem. But, the install continued to stall at 69%. So, and, yet, here we are.
    Now in regards to the metalink notes, I am new to the forum, so I don't know my way around quite yet. Isn't the metalink the paid suppport option? If so, I don't have that access.

  • Oracle 9i database configuration assistant cannot be launched

    After install 10g ODP.net and Oracle Developer Tools for Visual Studio .NET with ODAC components, the Oracle 9i database configuration assistant program cannot be launched.

    Never had this problem before, but this is usually becos of jre version incompatibility. Changing CLASSPATH env might help.

  • Oracle Database - Database Configuration Assistant

    Hello,
    When I was installing Oracle Database (at Install Product), it reached Database Configuration Assistant with an error pop out: ORA-12638: Credential retrieval failed. Please advise me, thank you in advance~

    This question does not have to be raised in Peoplesoft forum. Please ask this to the Database General forum, thanks.
    Thread locked.
    Nicolas.

Maybe you are looking for

  • Using iTunes with multiple macs

    I have a MacBook Pro and a Mac mini. I use a portable hard drive to store my iTunes library. I was able to use the same library for both Macs before and I'm not sure when (maybe before iTunes 8) but I'm not able to anymore. I can run it just fine in

  • Several reports on joined master-detail tables with single row source

    I have 1 master table (Fixed Assets) and several datail tables (Improvements, Depreciation, ...) I need to create several reports based on them all with criteria 'Select ALL from Master and join details /1 total row from details for 1 master row/ fil

  • Creating query with a criteria(constraint)  on amount more than x dollars

    Hi experts, I have an user requirement where I want to see all the transactions for a particular GL account range (expenditures) which were above 5000 dollars. I am using the new GL cube and ods. How can I define like this query, can we have such a v

  • Is it possible to slipstream Recovery CD that came with Satellite A40?

    Hi, Good day to all of you... I need help about my recovery CD. Is it possible to slipstream my Recovery CD that came with my laptop? It has XP SP1 and i want to slipstream it with SP2. Is it possible? Thanks!

  • ObFormLoginCookie Not Reset

    Hello I have OAM installed on a number of web servers in the environment and they are working fine under normal operations. But, I am having a problem with a particular sequence of access. 1. when access application 1 you are redirected to the login