Database creation Error
Hi,
I am working in oracle9i and linux 2.4.
I am going to create a New database . But i receive the following error as
SQL> startup nomount;
ORA-27302: failure occurred at: skgpwreset1
ORA-27303: additional information: invalid shared ctx
ORA-27146: post/wait initialization failed
ORA-27300: OS system dependent operation:semget failed with status: 28
ORA-27301: OS failure message: No space left on device
ORA-27302: failure occurred at: sskgpsemsper
SQL>
Please provide me the solutions....
Regs ...
Hi,
alert log error
Wed Jan 3 12:10:17 2001
Errors in file /u02/home/oracle/admin/ITADBA02/udump/itadba02_ora_19153.trc:
ORA-27302: failure occurred at: skgpwreset1
ORA-27303: additional information: invalid shared ctx
ORA-27146: post/wait initialization failed
ORA-27300: OS system dependent operation:semget failed with status: 28
ORA-27301: OS failure message: No space left on device
ORA-27302: failure occurred at: sskgpsemsper
Semaphore Values
[root@pc-p41866 etc]# more sysctl.conf
# Kernel sysctl configuration file for Red Hat Linux
# For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and
# sysctl.conf(5) for more details.
# Controls IP packet forwarding
net.ipv4.ip_forward = 0
# Controls source route verification
net.ipv4.conf.default.rp_filter = 1
# Do not accept source routing
net.ipv4.conf.default.accept_source_route = 0
# Controls the System Request debugging functionality of the kernel
kernel.sysrq = 0
# Controls whether core dumps will append the PID to the core filename.
# Useful for debugging multi-threaded applications.
kernel.shmmax=2147483648
kernel.shmmni=100
kernel.shmall=2097152
kernel.sem=250 32000 100 128
fs.file-max=327679
kernel.core_uses_pid = 1
please tell me what are the values going to be change in semaphores....
Similar Messages
-
Database creation error ucing DBCA
Hi!
When i istalled oracle 9i .the installation is suucessful but database creation is not.
the database creation aborted with error invalid size entry(expected 419...1232 but found 4192...1230 )
Pls Help
Hainder KaurHi,
Again run database create assistance by ./dbca and choose custom option for creating database,in this option oracle run database creation's scripts and i hope this time u will not face the same problem.
Thanks
Kuljeet -
Database Creation Error in 9.2.0.1.0
Installed 9i on a Win2K Pro machine. Software installation was successful (as far as I can tell). Able to connect to external Oracle DB's without problem.
However, when creating a local Oracle DB on my machine, I get TNS:packet writer failure errors during the initilization. This seems to happen during every install of a DB I try. The exception is if I log into the machine under the machine's administrator account, vice my domain account. Even though both accounts have the same access to the machine, the database creation will only complete under the machines' administrator account. Then if I do get the DB installed under the administrator. I can't connect to it when logged into the domain becuase I get end-of-file errors. Other user can successfully connect to the DB from separate boxes, but I can't connect locally. Nothing I have found so far can explain why this is happening. What else should I look at as possibly causing this problem. Or are their issues with installing the Oracle 9.2.0.1.0 DB on a domain.Installed 9i on a Win2K Pro machine. Software installation was successful (as far as I can tell). Able to connect to external Oracle DB's without problem.
However, when creating a local Oracle DB on my machine, I get TNS:packet writer failure errors during the initilization. This seems to happen during every install of a DB I try. The exception is if I log into the machine under the machine's administrator account, vice my domain account. Even though both accounts have the same access to the machine, the database creation will only complete under the machines' administrator account. Then if I do get the DB installed under the administrator. I can't connect to it when logged into the domain becuase I get end-of-file errors. Other user can successfully connect to the DB from separate boxes, but I can't connect locally. Nothing I have found so far can explain why this is happening. What else should I look at as possibly causing this problem. Or are their issues with installing the Oracle 9.2.0.1.0 DB on a domain. -
Database creation error: 9i RAC with Suse and LVM
We have managed to install 9i on a 2 server Linux cluster. All indications are that both nodes and the shared storage are up and running correctly. When we use dbca to create a clustered database, both nodes show up as install options.
However, when we attempt to create the new database, the install fails each time at 55% with a message regarding the file location <db name>rawtemp. The error is "The file cannot be reused; the file size does not match"
We have deleted the database after it has failed, and also deleted and recreated the /dev/raw location as well as the actual logical volume, all without success. Does anyone have a suggestion.
Thank you in advance!Update: The actual error is ORA 1257 "Cannot reuse raw_temp, unknown file size"
-
Oracle 9.20 DataBase Creation error
Hello,
I am a GIS developer and i should use Oracle 9i beacuse of my other software like ArcSDE and ArcGIS server version.
I have a problem when i want to create a database using "DataBase Configration Assistante".
On 81% and on "Creating and Starting Oracle Instance" i get an error without any message.
it's a page that have an information icon and an ok buttoun but without any message.
I sorry for my bad english.
Please help me to solve it.
Thanks
S.Mehdi HosseinyNo help is possible based on what you've written. Can you find someone to help you post more complete information? Here's what we need.
1. Operating system
2. Hardware platform and amount of RAM and available disk
3. The exact and complete 9i version
4. The exact error reported and the installation log file portion that includes the error message plus what preceded it. -
Manual database creation error
the oracle version is : 10.2.0
first i create a new instance by oradim , and a .ora file was generated. But when starting the new instance in sqlplus (database haven't been set up yet) , i encount a strange problem, the error code is as follow:
ora-24324 Service handle not initalized
ora-01041 internal error, hostdef extension doesnot exist
Did i commit any mistake during the operation ? Can anybody tell me the possible reason ?I cann't find the file sqlnet.ora in the root directory of %oraclehome%\db_1\network\admin ,but found one in the subdirectory %oraclehome%\db_1\network\admin\sample. I don't think it's the just file i am looking for, because all the content are commented out in that file. Below is some related content copy from that file :
#sqlnet.authentication_services
# Syntax: A single value or a list from {beq, none, all, kerberos5,
# radius, nts}
# Default: NONE
# Enables one or more authentication services. If
# Oracle Advanced Security has been installed with Kerberos5
# support, using (beq, kerberos5) would enable authentication via
# Kerberos.
#sqlnet.authentication_services=(beq, kerberos5)
Can you tell me where to find the proper file (sqlnet.ora) ? -
Schoolboy database creation error?
I think I may have made a huge fuck up in the creation of a database for work (shhhhh don't tell anyone.)
I have a table I, that has two fields, a and b. Both a and b are ID fields linked to table II.
So, basically I wanted a in table I to link to a record in table II and b in table I to link to a different record in table II.
I now think that is impossible though..help :'(Like this?
create table location {
id serial,
name text NOT NULL
create table agent {
id serial,
name text NOT NULL,
aka text NOT NULL,
passphrase text NOT NULL
create table pinpoint { -- table I
id serial,
agent integer NOT NULL,
location text NOT NULL,
datetime timestamp NOT NULL
create table trip { -- table II
id serial,
departure integer NOT NULL, -- field a
arrival integer NOT NULL -- field b
insert into location (name) values ('Hong Kong'); -- 1 (id serial)
insert into location (name) values ('Tokio'); -- 2
insert into location (name) values ('London'); -- 3
insert into location (name) values ('Los Angeles'); -- 4
insert into location (name) values ('New York'); -- 5
insert into agent (name, aka, passphrase) values ('John Smith', 'James Bond', 'passphrase'); -- 1
insert into agent (name, aka, passphrase) values ('Dave Jones', 'Derek Flint', 'passphraze'); -- 2
insert into agent (name, aka, passphrase) values ('Richie Cunningham', 'Austin D. Powers', 'stupid pass frase');
insert into pinpoint (agent, location, datetime) values (1, 1, '2006-12-5 23:20:00 GMT'); -- 1
insert into pinpoint (agent, location, datetime) values (2, 5, '2006-12-3 09:23:00 GMT'); -- 2
insert into pinpoint (agent, location, datetime) values (3, 2, '2006-12-6 10:08:00 GMT'); -- 3
insert into pinpoint (agent, location, datetime) values (1, 5, '2006-12-5 11:18:00 GMT'); -- 4
insert into pinpoint (agent, location, datetime) values (2, 1, '2006-12-3 22:01:00 GMT'); -- 5
insert into pinpoint (agent, location, datetime) values (3, 3, '2006-12-7 02:10:00 GMT'); -- 6
insert into trip (departure, arrival) values (4, 1); -- covert move 1
insert into trip (departure, arrival) values (2, 5); -- covert move 2
insert into trip (departure, arrival) values (3, 6); -- covert move 3
EDIT: (I have not tested the syntax and it's written rather Postgres-centric.) -
Test Database creation error oracle not available
I have installed Oracle 9i on AIX 5.2, after running the instance_test.sql file for the test databse i get the error ora-01034: oracle not available.
user13100708 wrote:
I have installed Oracle 9i on AIX 5.2, after running the instance_test.sql file for the test databse i get the error ora-01034: oracle not available.Hi and welcome to the forum!
Firstly, you need to set environment variable ORACLE_SID
Please show output of this variable:
echo $ORACLE_SIDThen post output of Mr. Zekeriya's suggestion:
sqlplus "/ as sysdba"
startup -
Hi
Just signed up to MS Azure account on the free trial, and I am trying to create a new database (I've tried this via Quick Create and Custom Create) but I just get a message:
Could not submit the request to create database 'MattTest'.
Any reason as to why this doesn't work? Thanks.Hello Matt,
Can you please share in which region are you trying to create the database. Also are you trying to create it in a V12 server?
Thanks,
Jan -
Hi Friends,
OS = Windows XP 3
Database = Oracle 11g R2 32 bit
Processor= intel p4 2.86 Ghz
Ram = 2 gb
Virtual memory = 4gb
I was able to install the oracle 11g successfully, but during installation at the time of database creation I got the following error many times and I ignored it many times... but at 55% finally My installation was hanged nothing was happening after it.....
ORA-28056: Writing audit records to Windows Event Log failed Error and at 55% my Installation got hung,,,, I end the installation and tried to create the database afterward by DBCA but same thing happened....
Please some one help me out, as i need to install on the same machine .....
Thanks and RegardsAAP wrote:
Thanks Now I am able to Create a database , but with one error,
When I created a database using DBCA, at the last stage I got this error,
Database Configuration Assistant : Warning
Enterprise Manager Configuration Failed due to the Following error Listener is not up or database service is not registered with it. Start the listener & Registered database service & run EM Configuration Assistant again....
But when I checked the listener was up.....
Now what was the problem, I am able to connect and work through sqlplus,
But I didnt got the link of EM and when try to create a new connection in sql developer it is giving error ( Status : failure - Test Failed the Network Adapter could not establish the connection )
Thanks & Regards
Creation of the dbcontrol requires a connection via the listener. When configuring the dbcontrol as part of database creation, it appears that the dbcontrol creation step runs before the dynamic registration of the databsase with the listener is complete. Now that the database itself is completed and enough time (really, just a minute or two) has passed to allow the instance to register, use dbca or emca to create the dbcontrol.
Are you able to get a sqlplus connection via the listener (sqlplus scott/tiger@orcl)? That needs to be the first order of business. -
Error in installing Database Control with Database Creation Assistant
I'm trying to install the Database Control on Win2003 with the Database Creation Assistant. I get the following error. D:\oracle\product\10.2.0\admin\ECOMDB\pfile\init.ora (The system cannot find the path specified).
Our init.ora file is not in that path and our file is named initECOMDB.ora. How do I tell DBCA the correct path and file name to use?
By the way I'm a unix guy and this is the first time I've done Oracle on Windows. The database had been created by someone else and the files are sort of slung all over the place.
Replies appreciated.
KirkOpen initECOMDB.ora, it may be calling D:\oracle\product\10.2.0\admin\ECOMDB\pfile\init.ora which does not exist. Change it to the correct directory or remove it if all the required parameters are already in initECOMDB.ora. The line to look for is ifile
BTW - if your database has already been created, you can create its database control from the command line:
emca -config dbcontrol db -repos create -
Oracle 12c database creation perl error
Hello,
When I try to create a
database in 12c I get at the end an perl error and the database creation stops.
Can someone tell me what the problem can be?
Thanks
WillemWillemT wrote:
Hello,
When I try to create a
database in 12c I get at the end an perl error and the database creation stops.
Can someone tell me what the problem can be?
Thanks
Willem
ERROR? What Error?
I don't see any error.
my car won't go.
Can someone tell me what the problem can be?
How do I ask a question on the forums?
https://forums.oracle.com/message/9362002#9362002 -
Error in sql database creation
how to solve the problem "create database permission is denied in database "master"" in sql database creation
>>how to solve the problem "create database permission is denied in database "master"" in sql database creation
Getting the permissions required to create database is the solution:)
http://dba.stackexchange.com/questions/42299/create-database-permission-denied-in-database-master
from the link
You need to execute this T-SQL command using an account that does have administrative rights, such as sa:
USE master;
EXECUTE sp_addsrvrolemember @loginame = N'YourAppUserLogin', @rolename = N'dbcreator';
Replace YourAppUserLogin with
the login the application user uses to connect to the database.
Satheesh
My Blog | How to ask questions in technical forum -
Database creation problem on Windows XP
Hello Readers
I have installed ORACLE Database Engine on windows XP.
I am facing problem in database creation.
I have tryed wizard as well as mannual method.
in wizard at 90% it gives an error "END-OF-FILE ON COMMUNICATION CHANNEL"
although CD drive is in CR Rom drive.
Please help me ....
Rashid Masood Ashraf
email: [email protected]After going to the properties as you suggested:
Right now the Obtain an IP address automatically is checked
I need to check the Use the following IP address:
What should I enter for
IP address:
Subnet mask:
Default gateway:
Please help.
Edited by: Nel Marcus on Dec 2, 2008 3:49 PM -
I am new to Java and am having trouble figuring out why I am throwing this error when running the jar file.
My code builds the jar file without error, but when I try to run the application from the jar file, I get the error
in my code that reads, " Unable to open Database!". I'm assuming there is an error in the creation of
the database and that it is null. I have tried to reconfigure the Java db in Netbeans, but have not been
successful. Any ideas? My code is below. thanks.
public fine() {
// Prevent multiple instances...
if (!obtainLock()) {
return;
Database database = null;
try {
database = new Database(SqlEngine.DERBY);
} catch (Exception e) {
System.out.println(e);
JOptionPane.showMessageDialog(null, "Unable to open the database!", "Error", JOptionPane.ERROR_MESSAGE);
MainFrame mainFrame = new MainFrame(database);
mainFrame.show();
}Sorry Abillconsl here is that code.
public class Database {
/** Create a local connection to a database engine.
* @param sqlEngine is the database engine type.
* @throws ClassNotFoundException if there is an error loading the driver.
* @throws SQLException if there is an error connecting to the database.
public Database(SqlEngine sqlEngine) throws ClassNotFoundException, SQLException {
this.sqlEngine = sqlEngine;
try {
Class.forName(sqlEngine.getDriverName());
} catch (Exception e) {
throw new ClassNotFoundException(e.getMessage());
con = DriverManager.getConnection(sqlEngine.getLocalUrl());
/** Create a connection to a database engine.
* @param sqlEngine is the database engine type.
* @param url is the URL to connect to.
* @throws ClassNotFoundException if there is an error loading the driver.
* @throws SQLException if there is an error connecting to the database.
public Database(SqlEngine sqlEngine, String url) throws ClassNotFoundException, SQLException {
this.sqlEngine = sqlEngine;
try {
Class.forName(sqlEngine.getDriverName());
} catch (Exception e) {
throw new ClassNotFoundException(e.getMessage());
con = DriverManager.getConnection(url);
/** Close the database connection.
* @throws SQLException if there is an error connecting to the database.
public void close() throws SQLException {
con.close();
con = null;
/** Encode a SQL qury string.
* @param s is the string to encode.
* @return the encoded string.
public static String escape(String s) {
if (s.indexOf("'") != -1 ) {
StringBuffer sb = new StringBuffer();
for (int i = 0; i < s.length(); i++) {
char c = s.charAt(i);
if (c == '\'') {
sb.append("''");
}else {
sb.append(c);
return sb.toString();
return s;
* Retrieve a field id from dbid table for a given field name
* @param fieldName of the field as defined in the database
* @return database identifier number for a field or zero if not found
public RwInteger getDBID(RwString fieldName){
ResultSet rs = null;
Statement stmt = null;
RwInteger dbid = new RwInteger(0);
try {
stmt = con.createStatement();
rs = stmt.executeQuery("SELECT DBID FROM dbid WHERE FieldName = '"+fieldName.toString()+"'");
while(rs.next()) {
dbid = new RwInteger(rs.getInt("DBID"));
} catch (SQLException e) {
System.out.println("Unable to Retreive FieldID for FieldName: " + fieldName.toString());
e.printStackTrace();
return dbid;
/** Retrieves a field name from dbid table for a given dbid.
* @param dbid the database field identifier number for the field
* @return field name as defined in the database
public String getFieldName(int dbid){
ResultSet rs = null;
Statement stmt = null;
String fieldName = ""; // field name not found.
try {
stmt = con.createStatement();
rs = stmt.executeQuery("SELECT FieldName FROM dbid WHERE DBID = " + dbid);
while(rs.next())
fieldName = rs.getString("FieldName");
} catch (SQLException e) {
System.out.println("Unable to Retrieve FieldName for DBID: " + dbid);
e.printStackTrace();
return fieldName;
/** Generate the friendly name for a particular field.
* @param rwType is the field to name.
* @return the friendly name for a specified field.
public String friendlyName(RwType rwType) {
return RecordType.forDbid(rwType.getFieldId())
+ "(" + (rwType.getSequenceNumber() + 1)
+ ":" + (rwType.getRecordId() + 1) + ")."
+ AbstractRecord.getFieldName(con, rwType.getFieldId());
// Database related variables.
public Connection con = null;
public static SqlEngine sqlEngine = null;
/** Unit test.
* @param args the command line arguments
public static void main(String[] args) {
try {
Database db = new Database(SqlEngine.DERBY);
int dbid = 1605;
String name = db.getFieldName(dbid);
RecordType recordType = RecordType.forDbid(dbid);
System.out.println("DBID " + dbid + " is field " + name + " in " + recordType);
AbstractRecord record = AbstractRecord.newInstance(recordType, db.con);
RwType rwType = record.getField(name);
System.out.println("rwType = " + rwType);
db.close();
} catch (Exception e) {
System.out.println(e);
}
Maybe you are looking for
-
How to set form feed in output .lst file
sql >set pagesize 60 spoo abc select * from xyz; spoo off In the file abc.lst header and placed details 60 lines. but at the time of printing if paper lenght is 72 lines how to set form feed?
-
After I installed mountain lion my back button frequently does not work because the prior screen does not appear iunder History. Apple tech support was not able to fix the problem. Does anyone have any suggestions?
-
Unlock Encypted PDF Using certificates
Hi All, I am using Encryption Service to unlock a pdf file and add reader extension rights to it. API of the Encryption Service: unlockPDFUsingCredential(encryptDoc, keyAlias) key Alias- The input value is the friendly name i.e. alias
-
Firewire problem with DVD burner
After update to snow leopard no support anymore for external dvd burner from lacie. the systemprofiler shows it, but I can not use it anymore. I'm so frustated!-( Everytime the same: DO NOT CHANGE A RUNING SYSTEM!
-
XML parser Problem in Oracle 9iAS
Dear All, I am trying to parse a xml file by using a SAX Parser. I am getting error "oracle.xml.parser.v2.XMLParseException: Invalid InputSource.'. I have already included 'xerces.jar' in the classpath. But it is always taking oracle xml parser. How