Database not showing up +sign

Why my database is not showing + sign where we expand to see tables , views etc in management studio. Please help me.
Thanks.

Hi venkat,
I’m writing to follow up with you on this post. Was the problem resolved after performing our action plan steps?If you are satisfied with our solution, I’d like to mark this issue as "Answered". Please also feel free to unmark the issue, with any
new findings or concerns you may have.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support

Similar Messages

HT1430 my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

There is a hardware problem. Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.

Balance Sheet not showing correct sign for Liability and Equity

Hai,
I am using SAP PL 40,
In SAP Balance sheet Report,
Liability Ledgers and Equity Ledgers is not showing correct sign. i mean,
In my Liability Ledger the value is
INR-10000.
In Balance sheet it showing
INR1000.
And also, is it possible to bring Dr and Cr column in Balance Sheet?
Now, it's coming in single Column.
Please help me out.
Regards,
Thanga Raj.K
09710445987

Hi
It's the system definition that under Standard Balance Sheet Report, the
Liabilities are displayed with POSITIVE SIGN although we know that the
balance for those liabilities accounts are negative. The reason for it
is that the liabilities accounts are defined as Passive Account, so when
the balance is negative, it's displayed with positive sign. And when
the balance is positive, it is displayed with negative sign. The
definition is mainly for the purpose of the reporting. In most of the
localizations, the financial reports supplied by the business should
display Liability and Equity with positive sign.
If you really want to display them in negative sign , you can define a
customized report template in Financials->Financial Report Templates->
and select all liabilities and tick the box in front of 'Reversal Sign'.
Regards,
Syn Qin
SAP Business One Forums Team
Edited by: Syn Qin on Aug 22, 2008 8:49 AM

Sign in not show as signed in and and watermark still on paid version 12

After signing in under "help" tab it does not show as signed in and watermark is still on paid version.
The adobe website shows that I have a Premier Elements serial number. I sat for 2 hours on hold with adobe chat with no results.
I uninstalled the faulty program and swep the drive with a registry cleaner and reinstalled the program with the same problem.
Running windows Vista
I installed the program on the C:drive adobe folder with all the other adobe programs and its there, but also there is a adobe Premier Elements 12 folder in "Customers" "Documents" is this normal.
The last time I had a instll problem was with Windows 3.0
Tech support was better then.

dclaver
Your new thread constitutes a duplicate of a very recent thread
http://forums.adobe.com/message/5965135#5965135
Duplicate threads tend to be confusing for the person asking the question as well as the persons trying to help. I suspect a moderator should be along shortly to close this thread that we are in now and direct further replies to your issue to the original thread (link cited above).
For now I will continue here briefly.
1. What happened with the idea to explore the Event Viewer for Error relating to what appears to me to be an product activation issue?
2. Have you contacted Adobe via its Adobe Chat to resolve this issue? Adobe is the only one who can resolve an activation issue.
The link to use is the following:
http://helpx.adobe.com/contact.html?product=premiere-elements&topic=signing-in-to-my-accou nt-or-registering-my-product
When the link opens, click on "I still need help." to bring up the Adobe Chat.
I have pre-set the topic for Serial Number Issues and Activating My Product.
In Premiere Elements 12 Help Menu/Sign In Sign Out constitutes Activation and Deactivation respectively. I cannot see that Adobe can interpret that any other way.
We will be watching for further developments.
Thank you.
ATR

HT4060 My Ipad air the battery is dead will not show any signs tried all cables and correct 12w charger any ideas?

My Ipad air the batterry is dead and will not show any signs, tried all cables and correct 12w charger, any ideas ?

Does you used lighning official cable ?
If yes :
-Try to to wash the connector with a brush and little bit of alcohol by paying attention !
OR
- Restore youre iPad

HT4623 I tried to update my husbands iphone 4 to ios 6 from ios 4.3.3. That is the only update that showed up on itunes as available. The download took 3 hours and after that the phone is the same and does not show any sign of being updated. Please hel

I tried to update my husbands iphone 4 to ios 6 from ios 4.3.3 That is the only update that showed up on itunes as an availiable update. The download took 3 hrs and after all of that the phone is the same showing no sign of being updated. We did turn it off and back on and still nothing. Can anyone please help and tell me what I need to do to update his phone. He is unable to update or downloaded apps or anything off of itunes at this point.
Thank you,
Tammy

So what happened to the phone during the process? It should have gone black and restarted a couple of times and there would have been a white progress bar as the update installed. Sounds to me like you've downloaded the update file but not actually installed it. The quickest way to see version of the software is installed is to go to Settings-General-About and check Version.

Data in database not showing up in BI

Hi,
In a table there is a 'COMPANY' column. Every record in the table has COMPANY = 'ABC'. However, any BI reports that use the COMPANY field always show COMPANY as an empty field.
- The 'Update Row Count' option in BI Administration tool reports there is 1 unique record
- The 'View Data' option in BI Administration tool shows "ABC'
- Creating a report in Answers show an empty value
- This only seems to happen with the COMPANY field
How can BI see 'ABC' in the Physical Pane but not show the 'ABC' value in an Answers report?
We have tried:
- Purging all caches
- Rebooting the server and deleting files from Cache and Tmp help
- Clearing Web Browser Cache
- Using Web Browsers on different computers
- Using IE and Firefox
Thanks
- B.

SELECT Contacts.Company saw_0 FROM "Test - BI" ORDER BY saw_0
is not a physical sql, its a logical sql. Go to admin - issue sql - paste above - set loglevel > 3 and execute. Once the results come back, check view log - find sql sent to database and post here.

GL Account Line Items-Qty Field not showing credit sign for credit postings

The instance is ECC 6.0
We are using new GL.
The issue is happening for WA doc types. For the credit postings, the Qty is not coming with the credit sign(-) in the line items details report (FAGLL03) for the GL account. When the same document is displayed via FB03, the QTY is having a credit sign(-).
Can someone tell if this is something that is controlled at the layout level for the QTY field and if I can change it so credit entries show with sign?.

Hi,
The quantity will not come with negative sign in FAGLL03.
Whether the quantity is positive or negative is determined using the posting key or debit/ credit indicatior.
You can not change this standad setting. You can change your layout to sort based on debit/ credit indicator.
Regards,
Gaurav

Database not showing up

I am running Dreamweaver CS3. I have Coldfusion developer
edition installed locally. I also have a test server with full
coldfusion.
I have defined by database sources in both places. However,
in Dreamweaver they do not show up. In the database window it says:
To use dynamic data on this page:
1. Create a site for this file -------that is checked off
2. Choose a document type -----that is checked off.
3. Set up the site's testing server -----that is checked off.
4. Specifiy the RDS login information for the ColdFusion
server -----that is checked off.
5. Create a ColdFusion datasource. I click on the
"datasource" link and it opens up the local version of ColdFusion.
My datasource is in fact listed there. It just will not show up in
Dreamweaver.
Am I missing a step somewhere?
Thanks.

Hi venkat,
I’m writing to follow up with you on this post. Was the problem resolved after performing our action plan steps?If you are satisfied with our solution, I’d like to mark this issue as "Answered". Please also feel free to unmark the issue, with any
new findings or concerns you may have.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support

Active Directory Sites + Boundary Groups + Database not showing correctly?

I am having a hard time trying to track down my issue but after digging for a bit, I think I have figured it out but I am unsure how to fix it.
Quick backstory, we had a domain controller go bad in this ADsite, the domain controller was also a DP at the time aswell and to fix our issues we dcpromo /forceremove it and cleaned up AD after. Created a new domain controller in
the ADsite, replicated everything across, everything is going as it should. SCCM on the other hand thinks I did something very wrong.
I'm not sure even how to explain but here goes. SCCM Console shows that the newly created distribution point that is running in the site where I ripped out the old domain controller and it is running well, the boundary is there, the DP is
tied to the boundary is it looks great. (
https://onedrive.live.com/redir?resid=B5BA8EC0E0DB675!4966&authkey=!ACD-aPFR5oE6TtI&v=3&ithint=photo%2cpng )
On the other hand, SCCM Database is not connecting the DP to the boundary. I am clueless on why this is happening. Because of this, it seems like no end users are getting any software. LocationServices on client machines show the computers are in the
proper site but SCCM does not seem to think the new DP is part of the site. (
https://onedrive.live.com/redir?resid=B5BA8EC0E0DB675!4967&authkey=!AEhKiU6eRr6kph0&v=3&ithint=photo%2cpng )
The other 9 DPs have no issues, they are part of their respected sites, clients are getting all the software from the proper DPs and no issues.
I would gladly share some log files if they are of any value to anyone. I have looked through ads*.log and have not found anything that would tell me it has issues querying the ADsite.
Any help would be greatly appreciated!

Removal of the DC should be unrelated as they is no direct communication. Deleting the boundary/group and re-add them.
Torsten Meringer | http://www.mssccmfaq.de

A question about bluetooth, supposedly i have it, but it's not showing any signs of availability

I contacted HP through the complaint option, this really isn't a complaint, just need some understanding... The reply to the complaint was "Upon checking here in my end, your HP TouchSmart tm2t customizable Notebook PC order was configured with 802.11b/g/n WLAN and Bluetooth(R) so basically, your PC has a bluetooth capability"
I don't fully understand what they mean by capability, all computers have bluetooth capability, Is bluetooth installed or not? I went to the device manager looking for signs of bluetooth, i found nothing, the wp wireless assistant shows nothing also. I talked to a live rep through instant messages, they gave me the webpage to download the drivers. I downloaded the drivers, when i tried to install it the drivers it said "turn on bluetooth" I can't turn it on if i can't find..
SO i need some assistance with this, any help is appreciated.
This question was solved.
View Solution.

that sucks, I accidently pushed "Solved" the issue isn't fully solved. I tried everything, i am a computer tech myself, tried hp chat, i have tried for 3 days, i have tried in the device manager, i tried in services, i tried in wireless assistant. BUT i think i know the solution
oh before i forget thanks for the email info.
I didn't find the bluetooth in wireless aisstance, device manager, or the "add devices." I did read a forum post where someone did a system recovery and their bluetooth started to work. Well, I tried the same, turns out my recovery would lock up at 12%. It was there for about an hour or so, i just stopped it, and then borrowed a windows 7 cd. When i installed the clean copy of windows, all my hp products where gone of course. Wireless assistant, the recovery partition (was wiped out with the windows recovery cd's). So I was at it again non stop. I once again was with hp live support chat, they got my attention in the windows services. It only showed "bluetooth support" not "bluetooth devices" or whatever it says. Tried the drivers countless times. I was also reading the only place to turn on bluetooth is through wireless assistance.
My previous attempts before the recovery, was looking in wireless assitance and devices etc... couldn't find it. After the format, i did enable it in services(not sure if it was after or before the format). But that didn't do anything. I am doing a system recovery right now on that laptop, it's still stuck at 12% for 4hrs now. I read post of this issue, and someone said they let it set for 16hrs and the recovery finished. So i'll just let this sit. and hopefully it will go through.
So here are my plans, if this recovery doesn't fix it, obviously step 1 install the drivers, step 2, make sure it's enabled in devices, step 3, turn it on in the wireless assistant. With my situations and my knowledge at the time, I wasn't able to perform these steps in this order. and syntax is important in this case.

Exchange Server 2013 Database not showing in ECP after removal of Exchange Server 2010

I recently complete the migration of my Exchange 2010 server to Exchange 2013. I then proceeded to uninstall the 2010 server using setup.com /m:uninstall. At the end of the process I received an error that it did not complete the uninstall.
I checked the server and Exchanged 2010 was removed. When I checked ECP on 2013 it still showed the old 2010 server listed. I used ADSI edit and manually removed the old sever.
Now when I log into 2013 ECP I only see the one serve but when I go into databases, none are listed. I check under the server itself and it shows the database that it is using but it is not listed under the database tab.
If I do a search under the database tab I can find it and adds it to the list. I can then open and view details.
My issue is, after I log out and then back in, I have to run the search to find the database again. In ideas on how to have it show up in the list like it did before I removed the 2010 Exchange server?
Thank you,

Hi,
From your description, I recommend you verify the following things for troubleshooting:
1. Please make sure that AD replication is completely by checking the user object's homeMDB attribute. This value should contain the DN value of the Exchange Server 2013 mailbox database.
2. Wait 30 minutes for the cache on the Exchange Server 2013 Client Access Server to clear or restart the MSExchangeOWAAppPool on the Exchange Server 2013 Client Access Server.
For more information, here is a kb for your reference.
Exchange 2013 Redirects to Exchange 2010 for OWA and ECP
http://support.microsoft.com/kb/2931385
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Adobe form not showing negative sign before amount

Hi Experts,
We are having a strange problem. Our developers displaying
negative
amount in my adobe output. Its working fine in our development
system.
But for the similar set of data in testing system, negative sign before
the amount is not coming. The same adobe form, layout and print
program
is there in both development and test environment systems. Please
help.
Thanks,
Sunny

Hi Sunny ,
Check with the development team .. The field attribute while display types which you can restrict in the adobe form layout settings.
I am pretty sure this will help you and revert back if you have any questions in this regard.
Thanks ,
Gowrisankar

G570 burning smell... system not showing any signs of life

Hi guys my G570 just started making some burning smell and then suddenly turned off....... all I see right now is a low glowing caps lock and power but no system power up
Lets make 2015 the year of the #DO
Did I or someone help you today? Press the star on the left to thank them with a Kudo!

hi Abdul_Ahad,
Im sorry to hear what happened,
I suggest you call Lenovo Technical Support for assistance, the system needs a thorough check before replacing some parts,
http://support.lenovo.com/en_US/feedback/detail.page?LegacyDocID=MIGR-76613
I think the computer can't effectively cool it self down, causing the issue.
Best regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

My iPod nano and iPad are not showing on iTunes

Hi, I have an iPod nano 6g and an iPad that were working just finr a couple of days ago. Now my iTuns is not recognizing either of them ! I tried every solution possible in the Support section but nothing worked.
The thing I noticed while trying to fix this issue is that the "Apple Mobile Device Driver" in the Device Manager has a yellow triangle next to it. In this mode almost nothing happens when I plug in the iPod besides the ring tone, it does not appear neither in the iTunes nor in My computer. And nothing happens in my iPod itself as it doesn't show the "connecting" screen
When I choose "Update the driver" and I let it update automatically, it's title change from "Apple Mobile Device Driver" to "USB Mass Storage Device" and it will show a yellow mark too as soon as I oppen the iTunes. The iPod starts showing in My computer and the "connecting" screen appears in the iPod but my iTunes shows me this message:
And then automatically the "disconnecting" screen shows on my iPod.
When trying to change back to "Apple Mobile Device Driver" my windows tells that the driver is not digitally signed.
But even if I chose it it will go back to the state where my iPod will not show on my computer
The iPad however is not showing any sign of activity whatsoever, its almost like I didn't plug anything if not for the ring tone. It doesn't even show up on the Device manager !
I tried compleately removing then reinstalling iTunes several time but it didn't solve the issue. I Also tried dissabling all other programes to look for conflicts but that didn't help either :l

I tried every solution possible in the Support section but nothing worked.
Including the following?
iPod: Does not appear in Windows or iTunes and Device Manager is empty
iPod not recognized in 'My Computer' and in iTunes for Windows
Your iPad questions should posted in the iPad forums.

Database not showing up +sign

Similar Messages

Maybe you are looking for