Database scale error for [DB] from Business to Basic

I can't change one of our Business DBs to Basic because I get the error in the title, no more detailed message. The DB is 166MB so should fit into Basic.
What can I do?

I'd tell more but as it is with the new dumbed down Microsoft error messages (cough :-)) I can't tell more. This is coming from the new Azure Portal when I try to change the tier. Here's a screenshot:

Similar Messages

  • Database scale error

    When trying to change the scale of our SQL database from S1 to S2 in the new portal I get the following error:
    Database scale error
    Database scale operation from S1 Standard to S2 Standard failed for <DBNAME>. ErrorCode: BadRequest ErrorMessage: The operation is not supported for your subscription offer type.
    Tried again on the old portal and get a similar message:
    The operation is not supported for your subscription offer type.
    This is a pay as you go subscription. Are those not compatible with anything above S1?

    Hi Alex,
    This should not be the case for Pay-as-you go subscription. We might have to verify you subscription details and so request you to raise a technical support request via
    http://azure.microsoft.com/en-us/support/options/ along with the screen shot of the issue.
    Regards,
    Shirisha Paderu

  • Error Message: Data from Business Add-In ME_PROCESS_PO_CUST not transferred

    Hi All,
    I have done a BADI implementation for ME_PROCESS_PO_CUST and when I try to convert a PR to PO using ME59N in ECC u2013 AFS System I am getting below error message.
    Data from Business Add-In ME_PROCESS_PO_CUST not transferred.
    I am trying to populate certain PO fields ( ekko and ekpo ) from PR fields. But the above error occurs when I update the Ex Factory Date manual that is EKPO-J_3AEXFCM.
    I am updating this in the method PROCESS_ITEM and what I found while debugging is in the class CL_PO_HEADER_HANDLE_MM, in the implementation of IF_FLUSH_TRANSPORT_MM~START, the contents of field u2018my_iteration_countu2019 keeps increasing and becomes 10 and raises this error.
    I read few of the related questions raised by others in this forum and understood that this can happen if I try to change the field that is disabled ( greyed) in ME22N. But this field that I am talking about is enabled.
    I also tried to move my code of populating the field EKPO-J_3AEXFCM from the PROCESS_ITEM to the enhancement point just above the user exit EXIT_SAPMMO6E_018 but still it doesnu2019t resolve the error.
    (We donu2019t want to use User Exit and hence we are trying with BADIs or enhancement point.)
    Can anyone please help me with this. I also found an OSS note 1334046 but not sure if that can resolve my issue.
    Thanks in advance.
    Ameesha.

    Hi Ameesha,
    i think u need to implement the BADI ME_PROCESS_PO_CUST in SPRO settings.
    SPRO>Purchasing>Business Add-in Purchasing-->BAdI: Enhance Processing of Enjoy Purchase Order
    try this once.
    All check this link.
    [Error Message: Data from Business Add-In ME_PROCESS_PO_CUST not transferred;
    Hope it helps.
    Regards,
    Raj

  • How to install sources for infobject from business content

    Hi,
    I have 16 infobjects for which we need to move to prod and there are no connections to it but the infobjects are active and some are i modified state, like no datasources, infosources, transfer rules etc., Can you please tell me the approach to install all the necessary for them. I mean how to find and how to install, please help if any documentation is available.
    Thanks

    Hi daniel,
    Inorder to  install the business object, you will be require to follow the following steps :
    i)Go to RSA1 (Admistrator Workbench) for installing the Business Content. Navigate to object you want to install. Now you want to install the info object then select Info Object.
    ii)Select your Info Object say 0MATL_GROUP (material Group).Click on Transfer selections.
    iii)Now when the info object is selected. It will always be in default selection (Only Necessary object), Now if you want to install the various other things like data source, transformation rule etc as you specify in query
    iv) For that go to grouping select IN DATAFLOW BEFORE AND AFTERWARDS. One more thing If you want to specify the Source system then u can do it by clicking on that Yellow Box (symbol specify the source system) adjacent to BEx (Truck Symbol). This mainly used for the things like transformation, update rule etc  as you want.
    v)Now you want to see if there can be some predictive error then go Install  --> Simulate Installation.
    vi)Now important point to note is MATCH(X) or COPY. Now suppose you already have the Material Group install in your system in Active version. Now here if you didnu2019t select the MATCH check box then your   A-version Material Group will be overwritten by the D-version Material group provided by SAP.
    vii)For ur more understanding lets take the example say  you have  added two customer specific attribute to Material Group now twist is SAP has also just release the enhance material Group with two additional attribute. Now  you are very curious of getting this two attribute in your already active Material Group. For this you will be required to install the material Group from Business content. If you forget to check the Match option then your customer specific attribute will be lost. So to retain them we have to check the MATCH(X) 
    Hope it will help. 
    Thanks,
    Deepak Machal

  • How to find the right primary key for DSO from Business Content

    According to best practice design, it is reccomended to make a  DSO where all fields from Business COntent Datasources are transferred.
    But, how to find the right primary indeks ?
    Any good suggestions ?
    For many of the Business Content dataflows there are not DSOs present, so ther e is no tip to get from the dokumentations as gfar as I have found.
    best Regards
    Ingrid

    Hi Ingrid,
    Your question will be perfect in case if you are going for a Custom cube.
    You will not have any problem when you create a Datasource in R/3 level even if it is been built on a single table or on view.
    Only point that you want to know how to design my Key fields in ODS.
    This will be purely depends at what level that you want to bring the data.
    Egg:-
    If you run the data source in RSA3 and check for Each GL if you have 10 liine items and you want all the 10 line items to be transfered to BW.
    In this case you need to check what is the unique combination of fields that is making this lineitems to exists as 10.then include all those fields into Your ODS Key Fields.
    This way you can have 10 records for that perticular GL in both sides, by which u will make sure that the data is been completely transfered.
    If in case if you clude your own Key fields then you will get the correct Total in report for each GL but you can't see all those 10 line items.
    For any case you need to figureout how many records that you want to take into BW based on that check the fields that makes it unique and then add them to ODS Keyfields that will solve your requirement.
    I think this will clear your doubt.
    Best Regards,
    VNK.

  • Error while installing transfer rules for 0PM_C03 from Business content

    Hi All,
    When i try to install the transfer rules for the Infocube 0PM_C03 from the Business Content, i get the following error:
    "Mapping between 2LIS_17_I3HDR  2LIS_17_ORDER is inconsistent".
    Here 2LIS_17_ORDER is the Infosource, and 2LIS_17_I3HDR  is the datasource.
    Also, kindly let me know how can the Infosource and the datasource have different names, like in the case for this Cube.
    Kindly help...

    Hi,
    The datasource and infosource can have different names no issue with that.
    and while selecting transfer rule for installing find with '2LIS_17_I3HDR'.
    Regards,
    Rathy

  • Crystal 2011 Failed to load database information error when upgrading from 2008.

    I'm unable to get past this error.   Error in File ~tmp34887ec5d7e6780.rpt: Failed to load database information.
    Configured Windows 2008 64 bit Server
    Installed Crystal Report Server 2011 - BI Enterprise 14.0.0
    Oracle 11g 64 bit version
    I can test the connection with success.  I can also run the tnsping command without issues.
    I pubished several working reports from Crystal 2008 to the new server with Crystal 2011.    Every time I run a report, I end up with the generic connection error: Error in File ~tmp34887ec5d7e6780.rpt: Failed to load database information.
    I saw a post that suggested installing the 32 bit Oracle Client first, and then the 64 bit client, but there was no indication that this would fix the error.  Does anyone know if that is infact the solution, or are there other underlaying issues?
    Thanks,
    Sue

    Hi Sue,
    Make sure you have 32 Bit version Oracle Client installed on your server as CR2011 is a 32 bit application and CR2011 Processing Server is also 32 bit.
    Check for the required Environment variables:
    Navigate to Start -> Control Panel -> System.
    Navigate to Advance system settings -> Environmental Variables.
    Under the user's variable check the environmental variable as given below if any difference make the changes:
    ORACLE_HOME=<64-bit version of the Oracle client>
    ORACLE_HOME32=<32-bit version>
    PATH=<64-bit version>
    PATH32=<32-bit version>
    BOE_USE_32BIT_ENV_FOR=ORACLE_HOME,PATH
    OR
    Install Oracle client as ‘Runtime’ install, then there is no need to set the Environment variables.
    If the Oracle client is installed prior to Business Objects then just restart the BO servers to make it working.
    I am assuming that you are recieving the error from BI launchpad so this post should have been on
    SAP BI
    - Shahnawaz

  • Error Installing 0MATERIAL from Business Content

    Hi,
    I am trying to install the infoObject 0MATERIAL from the business content. After the installation without any error, when I am trying to access the object I get the error: Settings for material number conversion not found
    Could you please help me on this?
    Many thanks
    Antonino

    Hi Antonino,
    I had even worst problem: I couldn't open 0Material for maintenance. I made a search in a net and found the following:
    Load from4.5 failing because of invalid trailing char in Material
    In short I made the following:
    Executed a report RSCC_V_TMCNV.
    After that I was able to change conversion routine in 0material to ALPHA.
    That's all.
    Best regards,
    Eugene

  • Download Error for apps from Creative Cloud desktop

    I have just signed up for the CS6 cloud package. As a teacher, I've paid for the Student or Teacher arrangement. However, I have not been able to download and install any of the applications. My first attempt was to download Acrobat from the website downloader; the system went throught the motions of installing the Application Manager app, but failed even though the icon was installed on my desktop. So I tried by installing the Creative Cloud desktop app. The installation seemed successful, but a cannot even get to see the apps and get a Download Error message!

    Hi, Deian47
    If the above link doesn't work then follow the thread http://forums.adobe.com/message/5469534, it has all the possibilities and their solutions.
    Thanks!
    Ankit

  • RCA:Database Monitoring error for SAP Systems on OS/4000 with DB4

    Hello Experts,
    We are trying to add ECC systems in DATABASE monitoring(DBACOCKPIT) in RCA workcenter of solman 7.0 ehp1 sp26, the DBSID of the systems are shown as *LOCAL.hence the system is not getting added .This is the case only for system on OS/400 and DB4.
    The DBSID in RCA is fetched from SMSY-Which is fetched from SLD->The data supplier in  ECC pushing the data to SLD
    The DBSID in System(Menu)-Status is showing as LOCAL, hence this DBSID(LOCAL) is reported in SLD->SMSY
    any pointers on this?

    Hi Nilesh,
    Please have a look into below SAP note
    1887354 *
    [ODBC SQL Server Driver] Associated statement is not prepared
    Hope this helps.
    Regards,
    Deepak Kori

  • Change database source error for CommandTables with CRJ-Runtime v2.0.2

    hello,
    -1
    INFO Befehl with FIELD: assek Type= StoredProcedureParameter
    INFO Befehl with FIELD: jahr Type= StoredProcedureParameter
    INFO Befehl with FIELD: monat Type= StoredProcedureParameter
    INFO org.sis.assekuradeur.base.srv.KassoServiceImpl Drucke Versicherer Abrechnung für Assek: 990000029
    ERROR CBR.sdk.JRCCommunicationAdapter  detected an exception: java.lang.NullPointerException
    at CDR.reportdefinition.ParameterFieldDefinition.qJ(Unknown Source)
    at CDR.reportdefinition.ParameterFieldDefinition.qL(Unknown Source)
    at CDR.dataengine.f.hH(Unknown Source)
    at CDR.dataengine.f.S(Unknown Source)
    at CDR.dataengine.f.hN(Unknown Source)
    at CDR.dataengine.DataSourceManager.int(Unknown Source)
    at CDR.dataengine.DataSourceManager.a(Unknown Source)
    at CDR.dataengine.DataSourceManager.if(Unknown Source)
    at CDR.dataengine.y.byte(Unknown Source)
    at CDR.dataengine.y.equals(Unknown Source)
    at CDR.dataengine.i.if(Unknown Source)
    at CDR.dataengine.i.do(Unknown Source)
    at CDR.dataengine.DataProcessor2.a(Unknown Source)
    at CDR.formatter.formatter.objectformatter.ObjectFormatter.(Unknown Source)
    at CDR.formatter.formatter.paginator.PageFormatter.a(Unknown Source)
    at CDR.formatter.export2.a.a(Unknown Source)
    at CDR.formatter.export2.ExportSupervisorEx.if(Unknown Source)
    at CDR.formatter.export2.ExportSupervisorEx.a(Unknown Source)
    at CBR.sdk.requesthandler.ReportViewingRequestHandler.a(Unknown Source)
    at CBR.sdk.requesthandler.ReportViewingRequestHandler.int(Unknown Source)
    at CBR.sdk.JRCCommunicationAdapter.do(Unknown Source)
    at CBR.sdk.JRCCommunicationAdapter.if(Unknown Source)
    at CBR.sdk.JRCCommunicationAdapter.a(Unknown Source)
    at CBR.sdk.JRCCommunicationAdapter$2.a(Unknown Source)
    at CBR.sdk.JRCCommunicationAdapter$2.call(Unknown Source)
    at CDR.common.ThreadGuard.syncExecute(Unknown Source)
    at CBR.sdk.JRCCommunicationAdapter.for(Unknown Source)
    at CBR.sdk.JRCCommunicationAdapter.int(Unknown Source)
    at CBR.sdk.JRCCommunicationAdapter.request(Unknown Source)
    at com.businessobjects.sdk.erom.jrc.a.a(Unknown Source)
    at com.businessobjects.sdk.erom.jrc.a.execute(Unknown Source)
    at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(Unknown Source)
    at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(Unknown Source)
    at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.ds.a(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.if(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
    at org.sis.assekuradeur.utils.JRCHelper.print(JRCHelper.java:224)
    at org.sis.assekuradeur.base.srv.KassoServiceImpl.erzeugeProvisionsAbrechnungVersicherer(KassoServiceImpl.java:2014)
    ERROR com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: java.lang.NullPointerException---- Error code:-2147467259 Error code name:failed
    ERROR  at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.if(Unknown Source)
    ERROR  at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
    ERROR  at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
    ERROR  at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
    ERROR  at org.sis.assekuradeur.utils.JRCHelper.print(JRCHelper.java:224)
    ERROR  at java.lang.Thread.run(Thread.java:595)
    ERROR Caused by: java.lang.NullPointerException
    ERROR  at CDR.reportdefinition.ParameterFieldDefinition.qJ(Unknown Source)
    ERROR  at CDR.reportdefinition.ParameterFieldDefinition.qL(Unknown Source)
    ERROR  at CDR.dataengine.f.hH(Unknown Source)
    ERROR  at CDR.dataengine.f.S(Unknown Source)
    ERROR  at CDR.dataengine.f.hN(Unknown Source)
    ERROR  at CDR.dataengine.DataSourceManager.int(Unknown Source)
    ERROR  at CDR.dataengine.DataSourceManager.a(Unknown Source)
    ERROR  at CDR.dataengine.DataSourceManager.if(Unknown Source)
    ERROR  at CDR.dataengine.y.byte(Unknown Source)
    ERROR  at CDR.dataengine.y.equals(Unknown Source)
    ERROR  at CDR.dataengine.i.if(Unknown Source)
    ERROR  at CDR.dataengine.i.do(Unknown Source)
    ERROR  at CDR.dataengine.DataProcessor2.a(Unknown Source)
    ERROR  at CDR.formatter.formatter.objectformatter.ObjectFormatter.
    Edited by: Markus Fieber on Aug 11, 2009 11:20 AM
    Edited by: Markus Fieber on Aug 11, 2009 11:37 AM

    I have solved the problem at last. Actually, I found lib of libstd_v2 for gcc can not be compatible with libocci. And I can not recomplie libocci with gcc. So I used aCC instead of gcc and all of things is ok now.

  • Derivation of customer group from business area.

    In CO-Profitability Analysis Sector wise Gross/Net margin analysis is being done based on the customer grp.
    But all the actual Goods issues to warranty is posted only against business area.
    We does have a mapping in Z Table for customer Grp. & Business area.
    Now we need to define a derivation rule to get customer grp for COPA from business area for warranty issues/Returns
    thanks for all
    swetha

    Hi Swetha
    KEDR is the only solution... You need to find out why your derivation rule is not working...
    In your derivation rule, please click on the magnifying lens beside KMKDGR and see which radio button is switched on... If it is 1st radio button (Do Not Overwrite....), change it to the  3rd Radio Button ..
    Also in the "Attributes" tab, check the option of "issue error msg if no value found"
    If the above does not help, ThenI would suggest to test the derivation rule...
    Select your derivation rule and Press F8... You can enter your sales order No, etc and click on "Derivation".... Once that is done, click on "Analyze derivation" and you can see the analysis
    Regards
    Ajay M

  • Where can I find information on migrating from Business Objects 5 to XI R2?

    We want to migrate several Business Objects implementations - some of which are Business Objects 5 and some Business Objects 6 to consolidate them into a XI R2 environment.
    I have the document that describes migration from 6.x to XI R2 but what is the process for migrating from Business Objects 5. Do I need to migrate from 5 to 6 and then follow the 6.x to XI R2 migration?
    Any pointers to additional hints and tips on migration or how to estimate how much effort is involved would also be welcome.
    Thanks in advance for your help.

    Hi,
    Following are the detailed steps for migration via Import Wizard:
    1] Go to Start > Programs > Business Objects XI Release 2 > BusinessObjects Enterprise > Import Wizard.
    2] The Welcome dialog box appears. Click Next.
    Setting source and destination environments:
    3] In the Specify source environment dialog box, set the following:
    u2022 Source: Business Objects Enterprise BO 6.5.x.
    u2022User Name:
    u2022 Password: visor
    BOMain key
    Note: Do not check the Import Application Foundation contents option since you are not performing Performance Management migration at this time.
    Click Next.
    4] The Warning page appears. Click Next.
    Note: The source repository can store any file, not just supported agnostic documents. Since the BusinessObjects XI Release 2 architecture requires a plug-in for each file extension, it does not import unsupported files (for example, .zip files and as .svg documents used in corporate dashboards).
    5] The Specify destination environment page appears. Set the:
    u2022 Destination: Business Objects Enterprise BOXI R2
    u2022 User Name:
    u2022 Password:
    u2022 Domain key file to: Default drive: \Business Objects\BusinessObjects Enterprise XI R2
    Click Next.
    6] Select the types of objects you want to import in this stage of the importing process. At a later stage, you select the objects themselves.
    u2022 Select the option u2018Import universes u2018.
    Click Next.
    7] Import options for universes and connections dialog box appears.
    Select the third option: Import all the universes and connections that the selected Web Intelligence and Desktop Intelligence documents use directly.
    8] The Please choose a merge scenario dialog box appears. Select I want to merge the source system to destination system and check the automatically rename top-level folders that match top-level folder on the destination system option.
    Click Next.
    9] The Incremental Import dialog box appears.
    You may need to import some objects more than once from the source repository to the destination repository.
    In this situation, you have the following update options:
    u2022 Overwrite object contents
    You select the types of objects for which the content overwrite applies:
    u2022 Documents (including dashboards and analytics)
    u2022 Universes
    u2022 Connections
    When you re-import an object, it will completely overwrite and replace the matching object (and its associated files) that you imported earlier.
    u2022 Overwrite object rights
    When you re-import an object, its associated security rights will overwrite the rights of the matching object you imported earlier.
    If you decided not to import security in the Security Migration Options dialog box, then the Overwrite object rights option is not relevant, and is therefore not available.
    If you don't select any overwrite options, the matching object in the destination repository will not change when you try to import it again.
    Note: This dialog box appears only if you select update as the import scenario.
    Click Next.
    10] Select the specific universe
    Click Next
    11] Information Collection complete dialog box appears.
    Click Finish
    12] Import Progress dialog box appears.
    Click Done
    Hope this helps !!
    Please revert in case of any queries.
    Regards,
    Deepti bajpai

  • Syntax errors for smarty code

    I work with smarty a lot, and I mean a lot.  Every single day in fact, all day long.  Is there a way to turn off the syntax errors for my smarty code?  Basically every file I open is going to tell me there are syntax errors all over the page...
    Thanks!

    I am not familiar with smarty but the options for disabling syntax errors can be found under the view menu,
    View > Code View Options > Syntax Error Alerts in Info Bar (tick or untick)
    Richard

  • Solution for "Database Connector Error: 'Unexpected'" issue

    **NOTE -- reposting as the previous post became corrupted.
    Some customers have encountered an issue in Crystal Reports when attempting to report from Salesforce.com data.
    The problem looks like this. You are able to log in successfully to your Salesforce.com instance. However, when you attempt to expand your Salesforce.com connection, you get an error that states - Database Connector Error: 'Unexpected' - and you are unable to proceed.
    This problem occurs because the JVM Heap Size setting for the Salesforce.com driver is not large enough to handle the number of objects (tables) in your Salesforce.com instance. This problem is easily resolved by increasing this setting and then restarting Crystal Reports.
    The default CRConfig.xml path for CR 2008 is : C:\Program Files\Business Objects\Common\4.0\java
    You will find the JVM setting in <DataDriverCommon> section.
    <JVMMaxHeap>64000000</JVMMaxHeap>
    <JVMMinHeap>32000000</JVMMinHeap>
    It will vary as to how much you need to increase your heap size to access your Salesforce.com instance. If you change the JVMMaxHeap to 128000000 that should be sufficient for most users but you may need to increase it further.

    test

Maybe you are looking for