Database shutting down Problem please give solution

hii.......
we have 7 databases in our server when i am restarting my serverComputer some Databases are shutting down (randomly)
i have to manually starting(databases) again .
Please provide solution
Operating System - Windows Server 2003
Oracle 10g- version - 10.2.0.1.0
Thanks in Advance
regards
Dpj
Edited by: user8029025 on Dec 16, 2009 11:11 PM
Edited by: user8029025 on Dec 17, 2009 8:54 PM

i have to manually starting(databases) again .
Please provide solution
in services try to set to automatically start when u restart system.
sarah

Similar Messages

Solution for those People having sleep and shut down problem.

Solution for those People having sleep and shut down problem.Go CONTROL PANEL
select RECOVERY
select OPEN SYSTEM RESTORE
then restore your laptop
This process work for me Please comment below if it was helpful toyou

As I said, a weak or dead PRAM battery can reportedly cause odd startup issues. If it has never been changed in six years, that's a really long-lasting battery, even if the iMac was kept on continuously.
They are pretty cheap from the right source, so you may want to try changing it.
http://eshop.macsales.com/item-specials/Newer%20Technology/BAA36VPRAM/

HT1695 am using ipod touch, but my ipod cant support wifi connection. could you please give solution,,

am using ipod touch, but my ipod cant support wifi connection. could you please give solution,,

Is this your problem:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
It is frequently a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Otherwise:
Does the iPod connect to other networks?
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>GeneralReset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

HT201406 my ipad touch screen is not working please give solution for it.

my ipad touch screen is not working please give solution for it.
i have connected ipad to itunes and done it restore seetings then also my touch is not working but
when i connected ipad to i tunes inside functions are working properly but touch screen is not working what can i do

If you have a screen protector on the iPad's screen, try removing it. If you don't or that doesn't help, and restoring the iPad to factory settings has not corrected the problem, then the iPad probably has a hardware problem and will need to be taken or sent to Apple for replacement.
Regards.

After cleaning my mac it opens and shuts down again please help!!!

after cleaning my mac it opens and shuts down again please help!!!

I opened the cover (there where the battery is) and I cleaned the dust gently with a dry napkin ...remove the battery and placed it again ...closed the cover and when i turn on my macbook bro now it shows the Apple logo and after some seconds it just shuts down (i have OSX 10.9 Mavericks)....
I tried to boot in safe mode, also tried to repair it and even re-install Mavericks and so on, but I could not fix it. I did a hardware test and the no problems occurred.

I tried many times to turn it on, it turns and the same white screen appears and the update starts again and shuts down. Please Help me!

Hello!
I have a MacBook Air. I have got a software update notification couple of days ago. I've clicked on it today, and it started installing updates.
But, I have got a notification telling that not all updates were installed successfully, then I have clicked on "Restart" from the notification box. Then my Mac restarted and the white screen with Apple logo and the update progress appeared (like what always happens during updates).
The problem that while the update progress reached around half the way, my Mac shutdown. I tried many times to turn it on, it turns and the same white screen appears and the update starts again and shuts down.
Please Help me!
MacBook Air (11-inch Mid 2009)

Welcome to Apple Discussions
You did not state whether you installed the update while on battery (not mains) power. You are warned not to apply certain updates without being connected to a charger & mains power.
Also remove any attached peripherals.
Reboot in Repair mode (command-R at start) and use Disk Tools-Disk Utility-Disk First AId to repair your disk, and as long as you're there repair permissions. Next quit Disk Tools and reinstall the OS. After completing that successfully reboot, log in and do a combo update.
You must have more than enough (not just enough) empty (free) disk space for the update.

Shut down problem on new macbook pro 13"

Hey,
Just a new convert to mac after ditching my glitchy windows desktop replacement.
Been really enjoying the mac (i've had it for 3 days now). I've experienced a shut down problem where everything would close, like the dock and the bar up the top. What's left is just my background and my mouse which i can still move around. If i press the power button, it brings up the shut down options but if i click shut down, it brings me back to the background again.
The first time, it happened was after i tried opening a macmame.dmg file which was not mounting, and that cause problems with shut down in which i had to force shut down. The 2nd time it happened (which was today), was not as a response to installing anything, or so i would think.
Also, is it 'safe' or normal or better to just leave my laptop on sleep instead of shutting it down? I see a few people doing it and just wondering about the benefits of doing that instead.

I've done that repair disk. So far this shut down thing has only occured twice in 4 days. I've shut the computer down 6-10 times so it's not a reoccuring issue, so hopefully that repair would've resolved anything.
I shall continue to let me mac sleep instead of shutting it down then, seems easier. And good thing to know that theres no viruses... hate working with virus scanners and all other nonsense.
Macmame is just a emulator for some games. It was something I had on windows so just wanted to see whether it worked on mac, I ended up getting it mounted and installed but didnt seem to work as well as on windows so i disabled it.

Shut down problem

I just bought an Iphone 3gs and It wont shut down. When I "slide to power off",The only thing you see is the white loading circle frozen.
It will not shut down >:( !
Please Help and thank you !

Your machine is suffering from Kernel Panics, please post the last KP. You can find instructions in Mac OS X: How to log a kernel panic - Apple Support

Macbook air Shut down problem

Hi everyone,
I used to have the shut down problem with my Macbook air. I have an 11" Later 2011 Macbook air.
The problem did not go away after updating to Mountain lion.
I just realized that although I was closing all programs, I was not ejecting my 3G modem/dongle.
Once I ejected it before commanding it to shut down, it did shut down properly.
I thought I should share it with you. May be there is a program that has not been closed or a devise that has not been unplugged/ejected properly and is restricting the shut down.
It worked for me. Hope it will work for you.
Enjoy your Mac.
J.

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
     If this does not help, you may have to take the computer to the Apple store
     to have the battery checked out.
     Best,

HELPI HAVE THE LATEST VERSION OF READER FOR SOME REASON IT FREEZES UP WHEN SRCOLLING OR PRINTING THEN I HAVE TO SHUT DOWN & RESTART PLEASE ADVISE

I HAVE THE LATEST VERSION OF READER FOR SOME REASON IT FREEZES UP WHEN SRCOLLING OR PRINTING THEN I HAVE TO SHUT DOWN & RESTART PLEASE ADVISE

Windows 8.1 Adobe Reader XI 11.0.1
Thanks
In a message dated 3/27/2015 3:46:30 A.M. Eastern Daylight Time,
[email protected] writes:
HELPI HAVE THE LATEST VERSION OF READER FOR SOME REASON IT FREEZES UP WHEN
SRCOLLING OR PRINTING THEN I HAVE TO SHUT DOWN & RESTART PLEASE ADVISE
created by pwillener (https://forums.adobe.com/people/pwillener) in
Adobe Reader - View the full discussion
(https://forums.adobe.com/message/7359996#7359996)

Mac mini intel shut down problem !! please help !!

hi !
following problem, mac mini intel single core does not shut down, shut down process last 10 min and more (bluescreen, black wheel running) but does not shutdown at all!!
When I log off my user and then press the shutdown button at the login window, it shuts down normally.
Any ideas???
Feeling like being in windows times???
please help
thanks
tobias

Good catch. I would never have though of that since I eagerly anticipate each chance I get for a clean install.
I much prefer to get a clean start and consciously change the things I need to work - often I find that the defaults really are better and would otherwise be stuck in habit...

My hp pavilion dv1000 (1615ts) has an overheating problem and shuts down suddenly. please help..

my hp pavilion dv1000 (1615ts) has an overheating problem and shuts down suddenly. please help..

with that age of laptop we immediately suspect an issue with dust clogging the exhaust fan or the thermal compound between the heatsink and fan breaking down and needing to be replaced. The laptop needs to be opened and inspected in other words.

I recently upgraded my iMac to 10.9.2 Nothing but problems since. Cannot connect reliably to a mixed pc/mac network at work, hangs at start up, hangs at shut down. Please help!

Can anyone offer suggestions as to why since upgrading to Mavericks 10.9.2 I can no longer access a mixed pc/mac network? Previous to the upgrade, I did not have any problems. Other macs within my office can still access it, so I know it is not a network based issue. It exists in my machine only, and the other matching machine that exists in the office did NOT do the upgrade and has no problems. (Bummer for me)
I have:
Reset the PRAM
Reset the SMC
Turned off the network Wifi and rebooted, then turned it on again, still ridicously slow when I try and connect to shared pc server. I can connect to other macs though.
Seems to alternate between a normal start up time, and a ridicously slow start up time with no apparent connecting reason as to why
I have a shared HP Laser printer on the network that is working with other computers accessing it, perhaps this is the conflict? It is in Wifi mode, but the software is loaded on my computer. However, prior to the upgrade, I had no problems.
My mail crashed shortly after installing 10.9.2, but I did finally get that up and running, but sometimes it loads and tells me that there is "No Mailbox Selected" in the initial opening Mail window. This is new, it never used to do that. I can select "Inbox" and see my mail, but I never used to need this step.
When I try and access the shared network that has always worked previously, it now will not load the shared docs and folders, just sits there, and hangs. Sometimes it will load the folders after about 5 minutes, but will not allow me to open them.
I do not run any virus protection software.
Any ideas? I would be infinitely grateful for suggestions.

Your download or install of the update may have been corrupt. Visit the Mac App Store and re-download the update or visit http://support.apple.com/kb/DL1726 and download the 10.9.2 update combo and re-install.
If that fails to solve the problem please post back and post a EtreCheck Report which you can locate at:
http://www.etresoft.com/etrecheck

Mac shut down problem

I've done all of the steps here: Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support but still have something that wants to be installed when I shut down my mac. I don't know what this is or how to get rid of it. Any suggestions please?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a general summary of what you need to do, if you choose to proceed:
☞ Copy a particular line of text to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in safe mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The test results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Acer Aspire V5|123 - Shutting Down Problems

Hi,
I have bought an Acer Aspire V5|123 netbook yesterday. I had done a clean install of Windows 8.1 (with Pro). At the moment I was trying to do some updates on this netbook to get to the latest updates. But each time this netbook updates, the shut down method is taking like 3 mins to boot back up again which is taking longer than usuall!
I have a Compaq (from HP) computer which has Windows 8.1, the computer I use mostly is this - the boot up and shut down times are fast and quick. The operating system runs smoothly on it and it works fine and never had a problem for a few months now!
Also, the power button light stays on for like 5 mins after the Windows shut down. So, I have been surfing on the web to find a solution to this simular problem. I have found out a forum thread with someone answering about replacing the battery or replace the BIOS battery with a new one and see if that solves the problem.
Thanks!
Best Regards,
Benjamin
[edited for privacy-please do not post personal or unique information such as but not limited to full names, email addresses, phone numbers, serial numbers, etc.]

UPDATE: Opened the machine to change the coin-cell battery and re-insert the memory card to see if this has solved the problem. Which it hasn't! Any solutions anybody?

Database shutting down Problem please give solution

Similar Messages

Maybe you are looking for