DataGrid - update contents and maintain sort selection

I have a DataGrid whose 'dataProvider' is bound to an
ArrayCollection. At some points in time the ArrayCollection is
replaced with a new set of data provided to the application. This
causes the DataGrid to be reloaded essentially, which also causes
the users sort selection to be reset. How can I keep the sort
selection when replacing the data?

There may be an easier way to do this, but I set a
headerRelease handler on the dataGrid and keep track of which
column is being sorted. When it is time to replace the
dataProvider, it is possible to sort my dataProvider based on the
last user click of the header.
It's not elegant, but it works. With this method I'm able to
store the user's preferred sort between executions. (that would be
application executions. Not the user)

Similar Messages

'Erase All Content and Settings' i selected it and it's taking too long it's not even loading! Is it really tooks a several hours ? is there any problem how can i fix it. Please tell me

'Erase All Content and Settings' i selected it and it's taking too long it's not even loading! Is it really tooks a several hours ? is there any problem how can i fix it. Please tell me

Likewise bro... atleast mine has the Apple logo... and the circular thing... I saw this online and i'll be trying it ASAP... http://support.apple.com/kb/HT1808

Update Content and Task Sequence Changes are Slow

ConfigMgr 2012 R2
When choosing "Update Content" from the deployment under the Deployment Types tab, the revision number changes but the update takes about 30 minutes to complete. When app testing this is becoming increasingly frustrating. A change made
and then having to wait ~30 minutes is wasting too much time. This delay doesn't always occur. When its working quickly, the pie chart would immediately turn yellow and a few minutes later files would be updated and the Last Update: under the pie
chart would show the current time/date. The packages being tested are all small and being distributed to a couple local DPs over 1GB connections. When triggering "Update Content", the distmgr.log does not display any information about
the distribution of the files until it actually does start which as mentioned earlier starts roughly 30 minutes after triggering "Update Content". Keep in mind it's not exactly 30 minutes. This timeframe is variable.
Also noticed that when an app install was set to disabled in a Task Sequence, when PXE booting, the app was still trying to run. Sometimes an app can be changed to disabled and an immediate PXE boot will not attempt to install the app. This also
applies to enabling a disabled app.
The update content issue would appear to be some type of backlog issue but disabling an app in a Task Sequence seems like it would be more like a DB transaction. Although it seems like two issues, both issues rear their ugly head at the same
time.
Any thoughts?
Thanks

Hi ,
Thanks for the info. When you create a package, the files are copied from the source path to the content library on the site server. Then, the content is copied from the content library on the site server to the content library on the distribution points.
Please also check if "Allow clients to connect anonymously" is enabled on the DP Properties. See this link:
https://social.technet.microsoft.com/Forums/en-US/a291c1cd-ab00-47f0-a99a-6befe178dfc7/sccm-2012-r2-osd-very-slow-at-driver-package-and-config-manager-client-stage-still-after-kb2905002?forum=configmanagerosd
http://blogs.technet.com/b/configurationmgr/archive/2010/06/03/solution-you-may-experience-slow-performance-when-using-bits-and-kerberos-authentication-on-configmgr-2007-distribution-points.aspx\
Thanks.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Update Content and Creation of New Packages Fails, Errors in PKGXFERMGR.log

I am having a problem distributing packages to Distribution Points. This has worked for over a year previously. I believe there may be a problem with IIS configuration somewhere but I cannot find what the delta may be.
When I look at the pkgxfermgr.log I see several things.
First, I see the jobs that I have started are stuck in a pending state. Example below:
==== Found 19 send requests in outbox D:\Program Files\Microsoft Configuration Manager\inboxes\PkgTransferMgr.box\requests.
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:23 AM
2204 (0x089C)
Send Request 202UESC1~ Job: J4YJMEGH Destination: PPWMDP12A.childrens.sea.kids~ State: Pending Status: Action:
None~ Total size: 0 k Remaining: 0 k Heartbeat: 10:52~ Start: 12:00 Finish: 12:00 Retry: 11:22~
SWD PkgID: SC1001EB SWD Pkg Version: 1
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:23 AM
2204 (0x089C)
Send Request 202UFSC1~ Job: JPZJ1IM3 Destination: PPWMDP12B.childrens.sea.kids~ State: Pending Status: Action:
None~ Total size: 0 k Remaining: 0 k Heartbeat: 10:52~ Start: 12:00 Finish: 12:00 Retry: 11:22~
SWD PkgID: SC1001EB SWD Pkg Version: 1
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:23 AM
2204 (0x089C)
Send Request 202UGSC1~ Job: J8OKU91R Destination: PPWMDP12A.childrens.sea.kids~ State: Pending Status: Action:
None~ Total size: 0 k Remaining: 0 k Heartbeat: 10:45~ Start: 12:00 Finish: 12:00 Retry: 11:15~
SWD PkgID: SC1001EC SWD Pkg Version: 1
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:23 AM
2204 (0x089C)
Send Request 202UHSC1~ Job: JM51YI72 Destination: PPWMDP12B.childrens.sea.kids~ State: Pending Status: Action:
None~ Total size: 0 k Remaining: 0 k Heartbeat: 10:45~ Start: 12:00 Finish: 12:00 Retry: 11:15~
SWD PkgID: SC1001EC SWD Pkg Version: 1
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:23 AM
2204 (0x089C)
Send Request 202UISC1~ Job: J5C9KJX1 Destination: PPWMDP12A.childrens.sea.kids~ State: Pending Status: Action:
None~ Total size: 0 k Remaining: 0 k Heartbeat: 10:25~ Start: 12:00 Finish: 12:00 Retry: 10:55~
SWD PkgID: SC1001ED SWD Pkg Version: 1
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:23 AM
2204 (0x089C)
For each job, I see the following for errors:
Checking for sending capacity. Used 0 out of 15.
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3340 (0x0D0C)
COutbox::TakeNextToSend(pszSiteCode) SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3340 (0x0D0C)
Retrieved the snapshot for priority 2, there are 2 files in the snapshot.
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3340 (0x0D0C)
Found send request. ID: 202VSSC1, Destination: PPWMDP12B.childrens.sea.kids
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3340 (0x0D0C)
Checking for sitesystem-specific sending capacity. Used 0 out of 5.
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3340 (0x0D0C)
Created sending thread (Thread ID = 0xF94) SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3340 (0x0D0C)
COutbox::TakeNextToSend(pszSiteCode) SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3340 (0x0D0C)
Retrieved the snapshot for priority 2, there are 1 files in the snapshot.
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3340 (0x0D0C)
Found send request. ID: 202VTSC1, Destination: PPWMDP12A.childrens.sea.kids
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3340 (0x0D0C)
Checking for sitesystem-specific sending capacity. Used 0 out of 5.
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3340 (0x0D0C)
Created sending thread (Thread ID = 0xCA8) SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3340 (0x0D0C)
COutbox::TakeNextToSend(pszSiteCode) SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3340 (0x0D0C)
No (more) send requests found to process. SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3340 (0x0D0C)
Waiting for new/rescheduled send requests, Maximum Sleep Time = 60 minutes
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3340 (0x0D0C)
Sending thread starting SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3988 (0x0F94)
Sending thread starting SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3240 (0x0CA8)
STATMSG: ID=8206 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_PACKAGE_TRANSFER_MANAGER" SYS=PPWMCM12.childrens.sea.kids SITE=SC1 PID=4124 TID=3988 GMTDATE=Tue Aug 05 17:53:02.480 2014 ISTR0="SC1001F4" ISTR1="PPWMDP12B.childrens.sea.kids"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="SC1001F4" AID1=410 AVAL1="4" AID2=404 AVAL2="PPWMDP12B.childrens.sea.kids"
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
STATMSG: ID=8206 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_PACKAGE_TRANSFER_MANAGER" SYS=PPWMCM12.childrens.sea.kids SITE=SC1 PID=4124 TID=3240 GMTDATE=Tue Aug 05 17:53:02.482 2014 ISTR0="SC1001F4" ISTR1="PPWMDP12A.childrens.sea.kids"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="SC1001F4" AID1=410 AVAL1="4" AID2=404 AVAL2="PPWMDP12A.childrens.sea.kids"
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
Package file = SC1001F4.PCK.DLT.0.4 SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3240 (0x0CA8)
Performing preactions package SC1001F4, Distribution point PPWMDP12A.childrens.sea.kids
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
Package file = SC1001F4.PCK.DLT.0.4 SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3988 (0x0F94)
Performing preactions package SC1001F4, Distribution point PPWMDP12B.childrens.sea.kids
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
CContentDefinition::GetFileProperties failed; 0x80070003
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
CContentDefinition::TotalFileSizes failed; 0x80070003
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
Sending content Content_2a01d5d7-7f70-4bea-87f2-33ed3d269b31.1 for package SC1001F4
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
Redistribute=0, Related=Content_fbf0e24d-92a6-4196-8801-047e11ecb9dc
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
Not copying: LMConsole.msi SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3240 (0x0CA8)
CContentDefinition::GetFileProperties failed; 0x80070003
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
CContentDefinition::TotalFileSizes failed; 0x80070003
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
Sending content Content_2a01d5d7-7f70-4bea-87f2-33ed3d269b31.1 for package SC1001F4
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
Redistribute=0, Related=Content_fbf0e24d-92a6-4196-8801-047e11ecb9dc
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
No related content file with hash '0B7780EBC729C5835E666C5EF183118FA79E9DF55B2772954CB172B071D948B3', exists on the DP, binary delta replication will not be used.
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
CSendFileAction::SendFiles failed; 0x80070003
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
CSendFileAction::SendFiles failed; 0x80070003
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
Notifying pkgXferJobMgr SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3240 (0x0CA8)
Sending failed. Failure count = 4, Restart time = 8/5/2014 11:23:02 AM Pacific Daylight Time
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
Not copying: LMConsole.msi SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3988 (0x0F94)
Sent status to the distribution manager for pkg SC1001F4, version 4, status 4 and distribution point ["Display=\\PPWMDP12A.childrens.sea.kids\"]MSWNET:["SMS_SITE=SC1"]\\PPWMDP12A.childrens.sea.kids\
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
STATMSG: ID=8211 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_PACKAGE_TRANSFER_MANAGER" SYS=PPWMCM12.childrens.sea.kids SITE=SC1 PID=4124 TID=3240 GMTDATE=Tue Aug 05 17:53:02.687 2014 ISTR0="SC1001F4" ISTR1="4" ISTR2="PPWMDP12A.childrens.sea.kids"
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="SC1001F4" AID1=410 AVAL1="4" AID2=404 AVAL2="["Display=\\PPWMDP12A.childrens.sea.kids\"]MSWNET:["SMS_SITE=SC1"]\\PPWMDP12A.childrens.sea.kids\"
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
Sending thread complete SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3240 (0x0CA8)
No related content file with hash '0B7780EBC729C5835E666C5EF183118FA79E9DF55B2772954CB172B071D948B3', exists on the DP, binary delta replication will not be used.
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
CSendFileAction::SendFiles failed; 0x80070003
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
CSendFileAction::SendFiles failed; 0x80070003
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
Notifying pkgXferJobMgr SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3988 (0x0F94)
Sending failed. Failure count = 4, Restart time = 8/5/2014 11:23:02 AM Pacific Daylight Time
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
Sent status to the distribution manager for pkg SC1001F4, version 4, status 4 and distribution point ["Display=\\PPWMDP12B.childrens.sea.kids\"]MSWNET:["SMS_SITE=SC1"]\\PPWMDP12B.childrens.sea.kids\
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
STATMSG: ID=8211 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_PACKAGE_TRANSFER_MANAGER" SYS=PPWMCM12.childrens.sea.kids SITE=SC1 PID=4124 TID=3988 GMTDATE=Tue Aug 05 17:53:02.741 2014 ISTR0="SC1001F4" ISTR1="4" ISTR2="PPWMDP12B.childrens.sea.kids"
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="SC1001F4" AID1=410 AVAL1="4" AID2=404 AVAL2="["Display=\\PPWMDP12B.childrens.sea.kids\"]MSWNET:["SMS_SITE=SC1"]\\PPWMDP12B.childrens.sea.kids\"
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
Sending thread complete SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3988 (0x0F94)
Any help would be greatly appreciated.

Hi,
0x80070003 = The specified path couldn't be found.
Please try to disable the AV software.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Getting content and address of select-options (created dynamically)

Hi guys,
Suppose I have a dynamically created select-options in a program
SELECT-OPTIONS it_ranges FOR ...
Let's say I can determine its name ( IT_RANGES ) only during program execution.
Now I know I can use field symbols to get its content like below:
FIELD-SYMBOLS: <fs>.
"here I will have content of the table in <FS>
ASSIGN ('IT_RANGES[]') TO <fs>.
...but I would like to know how can I get the content of this select-options table through date reference
TYPES: BEGIN OF t_ranges,
        sign TYPE c,
        option(2) TYPE c,
        low TYPE i,
        high TYPE i,
       END OF t_ranges.
"let say tt_ranges is of the same type like IT_RANGES
TYPES: tt_ranges TYPE TABLE OF t_ranges.
DATA: ref TYPE REF TO data.
CREATE DATA ref TYPE tt_ranges.
The above will only create typed reference to table but I want it to point to my table IT_RANGES. The statement below don't work here.
GET REFERENCE OF ('IT_RANGES[]') INTO ref.
Is there any other way I can get (using data reference)?
1) address of this select-options table
2) content of this select-options table
Thanks for help in advance
M.
Edited by: Marcin Pciak on Nov 28, 2008 11:33 AM

Statement CREATE DATA would only make sense when you are trying to create the dynamic select options. You can use the addition TYPE HANDLE in order to create the Range Table. Check method implementation CREATE_RANGE_TABLE in class CL_WDR_SELECT_OPTIONS.
Once the Select-option is created, you need to use the GET REFERENCE to get the data reference of the Select-options. We can't specify the dynamic reference with brackets in the GET REFERENCE statement. So, you need to use the field-symbols to do the dynamics.
DATA: ref TYPE REF TO data.
DATA: ref_fs TYPE REF TO data.
FIELD-SYMBOLS: <fs>.
DATA: w_range TYPE i.
SELECT-OPTIONS it_rang FOR w_range.
START-OF-SELECTION.
GET REFERENCE OF it_rang[] INTO ref.
ASSIGN ('IT_RANG[]') TO <fs>.
GET REFERENCE OF <fs> INTO ref_fs.
write: 'done'.
Regards,
Naimesh Patel

Update Content and Photo Gallery

Forgive me for cross posting but I was not aware of this
group when I originally posted. Here is my orginial post. Maybe
someone can help me or point me in the right direction.
I am using Spry updateContent to load in html fragments
(div). What I'm trying to do now is load in the Spry Photo Gallery
demo. I have used this tutorial to build the Photo Gallery:
http://www.adobe.com/devnet/dreamweaver/articles/spry_photo_album.html
I've tried loading the entire photo gallery html page but
this does not work. I then tried loading in a fragment with just
the div's with and without the scripts. I then tried moving the
scripts to the main document. Nothing seems to work. Any
suggestions?
charlie-imac

Hi Charlie,
Sounds like you are trying to run Spry twice. Once when you
loadContent and then again to run the gallery after updateContent
runs.
Is that correct? If so, it won't work as you noticed, since
Spry has already processed the page by the time the DIV is loaded.
What's the goal of your page? Is there a specific reason you
are using updateContent? You can use the gallery as it was
designed, or for updateContent, make sure the DIV you are loading
already has the needed HTML markup.
Let me know if I missed something.
Donald Booth
Adobe Spry Team

Problems using Content and Structure to move pages

I am developing a public facing website using SharePoint 2013. The site uses the management metadata friendly URLs. The site consists of a site collection with half a dozen sub sites. I am wanting to move some pages from one sub site to another. So I have
been using the Site Content and Structure under Site Settings. I select the pages to move and then select move and select the other sites pages library. Many times this is failing, sometimes leaving a copy of the page in both sub site's pages library, other
times not moving the file at all. The most frustrating thing of all though is that it never fixes up the managed metadata navigation terms. So I am having to go through and move the term and all it's children that relate to the pages I have moved. Then I have
to manually edit each one to have the URL to the correct sub site after the move!!! Occasionally doing the move seems to delete the term completely from the term store. This is so frustrating.
The content and structure move tool at least fixes up links within the pages. But it really should fix up friendly URLs too.
Is there something I am missing? Is there a recommended approach for moving pages from one sub site to another?

Hi Vertigrator,
may i know your sharepoint latest cumulative update? i would like to check if this issue only happens on the specific environment.
please help me to confirm, if the steps, more likely:
1. navigate to site actions->site settings-> site content and structure
2. select the site that need to be moved, in the drop-down arrow of the site select "move" or "copy".
3. select the destination.
do this path are also able to give the same result as the steps? http://yoursite/_layouts/sitemanager.aspx
and please do restart your "sharepoint server Publishing infrastructure" at the "site collection features".
as i know, sharepoint sites are not actually moved from one location or server to another, rather they most likely backed up to a file and then the content or site is re-created from the backup file.
example at 2010：
http://www.coretekservices.com/2011/10/20/sharepoint-2010-how-to-move-a-subsite-to-a-different-location/
http://blog.netnerds.net/2011/03/sharepoint-move-a-subsite-to-another-site-collection/
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Adobe air doesn't submit updated content from ckeditor

Hello,
I'm wiriting applicaiton using adobe air and part of it is to display in iframe code of website with built in ckeditor (http://ckeditor.com).
The problem is that when I want to submit modified text using ckeditor adobe air send old content.
I'm trying to get new text from ckeditor element using:
     1. CK method "var content = CKEDITOR.instances.editor_content.getData();"
     2. jQuery call: "jQuery("#editor_content").val()"
but both methods return always the initial text, not the modified one. It works without problems with all standard browsers (Chrome, FF, IE etc.).
to test this issue you can open this url within adobe air window (i.e. as iframe):
     http://ckeditor.com/demo#flash
then update content and try to "send to flash". It will send original content, not the modified one.
Does anyone have any idea of workaround for this that can force Adobe Air to send send back updated content of ckeditor ?
I would prefer to find solution on Adobe Air side, without experimenting with other versions of CK or alternative implementations of WSIWYG editors because it's part of bigger project.
Any adivices welcomed!
thanks,
Marek

The problem is fixed:
With Windows Fix It at least I was able to uninstall Adobe Air. After Reisnatllation of Air and my application the system is running quite wonderful.
Best regards,
R. H.

Hi, I have selected earse content and settings in general settings, after that my iphone displays apple symbol only. Did i spoil my iphone?

Hi, I have selected earse content and settings in general settings, after that my iphone displays
apple symbol only. Did i spoil my iphone?

It takes a very long time, depending on the size 8,16,32GB?
it can take over a few hours.
if it doesn't work over 24hrs connect it to a computer using itunes, and choose update, it'll update it with the newest firmware.

Ipod content is grayed out and I cannot select as source or play on mini

Hi - this just happened and I need to know how to fix. I cannot seem to play any of the music on my ipod mini. I see the songs but the ipod skips right over them. The exception is one song that I downloaded for free. When I log into itunes, I see the ipod and the songs, but they are all grayed out and I cannot select any of them or play from my ipod source. This just happened this week and I wonder if I have somehow removed thelink to the purchased music? I connect the ipod to my other computer and it erased my content (I am new at this) so I reconnected to the orginal and restored my playlist, but nothing will play now. All itunes and ipod are up to date. Can any one help?
Ipod Mini Windows XP

Grey text when you look at the content and lock symbol at the bottom of the screen simply shows that your iPod is set to "automatically update songs and playlists". When you connected your iPod to the second computer you will have been presented with a dialogue box saying you were linked to another computer and asking if you wanted to link to this one. I would guess that you clicked "Yes" instead of "No" which is why your iPod was erased. If you want to access your iPod directly, play it through your iTunes, connect it to a second computer etc. you just need to change the update method to "Manually manage songs and Playlists" in the iPod preferences. Managing Your Songs Manually One thing to remember about manually updating though is that the iPod also has to be manually ejected before the "Do Not Disconnect" message will go away. Safely disconnect iPod
Also, If you usually change your iPod Options by selecting 'View iPod' from the 'Edit' menu in Windows, you may on occasion find it is also greyed out, however if you right click the iPod icon in iTunes you can select 'iPod Options' and change to manual update from there.
For info: iPod 101
The iPod offers three ways to transfer music from your computer. You can select one of the following update modes from the iPod Preferences menu in iTunes (Edit=>Preferences=>'iPod' tab):
1) Automatically update all songs and playlists. This is the default mode, in which your entire music library, including playlists, is automatically synced to your iPod. If the music library on your computer exceeds the iPod storage capacity, you are prompted to select a different update method.
2) Automatically update selected playlists only. With this option, iTunes automatically copies the playlists you have selected to the iPod when you connect it to the computer.
3) Manually manage songs and playlists. You can also choose to transfer music to the iPod manually. This allows you to drag and drop individual songs and playlists from iTunes to the iPod.

I am installing iCloud. My last step is to update store preferences. All selections (music, apps, books, etc.) are grey and cannot be ticked as suggested. Any ideas?

I am installing iCloud. My last step is to update store preferences. All selections (music, apps, books, etc.) are grey and cannot be ticked as suggested. Any ideas?

I'm assuming that Rosersberg is in Sweden (?). If it is then you are in a country where music can't currently be re-downloaded from the store, only apps and ibooks. If you still have your old computer with your music on it then you should be able to copy it over from it e.g. via file sharing, an external drive : copying content.

Difference between "Distribute Content" and "Update Distribution Points"

Hi,
Can someone clarify this for me, I need to redistribute a package to all my distributions points. Should select distribute content and then select the DP's or should I just use the option "Update Distribution Points" to redistribute? TIA

Yes. Once content has been distributed you can not "Distribute Content" again to the same DP. However, you do have another option, go to the properties of the DP, "Content" tab, find the package in question and conduct a re-distribute.
This approach does not increase the versioning of the content whereas "Update Distribution Points" does.
P.S. If you have not read it yet, here is a great
article about content monitoring and validation.
-Tony

TS1398 After the 6.0.1. update on my iPhone 4s the option for wifi has greyed out and cannot be selected. What can I do to restore wifi?

I have held off updated my iPhone 4s with the 6.0.1 but having problems connecting to wifi I thought maybe being out of date was the problem.
Having done the update the wifi option is now greyed out and cannot be selected at all. I have rebooted, forgotten networks and turned on and off so many times. There is nothing wrong with the wifi at home as other devices connect no problem. What can I do?

I'll repeat the Apple support pages linked in the previous post:
http://support.apple.com/kb/TS1559
Go through the step outlines there starting at the top and work down until you've solved the problem.

How can I check my passcode I updated today and when I am going to reset all content and setting my iPhone 4S they asked me for passcode when I entered the passcode the one I just update too is doesn't want to accept it

how can I check my passcode I updated today and when I am going to reset all content and setting my iPhone 4S they asked me for passcode when I entered the passcode the one I just update too is doesn't want to accept it

I have had the same problem with iPad recently not too sure why it happened but if you are completing a full reset anyway the easiest way is the restore via itunes on your computer and then set up a new passcode again. Resetting via itunes doesnt require a passcode so it should go straight through.
Hope this helps

I selected update option and it erased my ipod with all downloaded and paid materials...any ideas for how to restore?

I selected the update option and it erased my ipod with all downloads and other materials lost...any ideas on how to restore?

Everything should be on your computer. Just sync it back.
Did you fail to make sure that everything was on your computer before updating?

DataGrid - update contents and maintain sort selection

Similar Messages

Maybe you are looking for