DataSocket Read is only reading default Data

I've just started experimenting with DataSocket so maybe this'll be an easy question to answer. I set up a simple system by publishing a double on one computer to a server on that same computer and then reading it from another labview app on that same computer. I created a predefined data item for it. That worked great. But, then I tried to read that same item from an app on a different computer. All I can seem to get is the default value I set up in the server configuration. I'm using Labview 6. I've tried both the consolidated new datasocket VIs and also the older 5.1 style Vis as well as just setting up an indicator to read itself. Anybody got any ideas?

Its hard to figure out what you might be doing wrong. I'd say run the labview datasocket shipped examples and see what you are doing different than those.
See if those examples VI work on different computers.
A Rafiq

Similar Messages

Read only field in data manager

Hi,
if we set a field permission as read only in console.
in data manager this field will be read only.
in import manager during process of import will this field be receiving value or it will be read only
Sonali

Hello,
I tested (MDM 5.5 sp6) and if you import data, and for a read-only fied mapped, data can be created and updated ( import done with same role/user than the one with read/only rules)
I haven't see this behaviour on documentation, but don't look as a trouble for me.
If this role/user try to update from the data manager, it is not possible to update a read-only fied
Hope helps you
regards
Vincent

How to make specific cell(s) read-only in a data-grid

Hi there!
Is there a way to make an specific cell read-only in a data-grid?
Best regards,
Ciro

Hi !
After some months... here is the solution:
Private WithEvents _gridTaste As DataGrid
Private Sub MyScreen_Created()
AddHandler FindControl("GridTaste").ControlAvailable,
Sub(s, e)
_gridTaste = CType(e.Control, DataGrid)
End Sub
End Sub
Private Sub _gridTaste_BeginningEdit(sender As Object, e As DataGridBeginningEditEventArgs) Handles _gridTaste.BeginningEdit
' I want do set the cell (2,0) as read only:
If e.Row.GetIndex = 2 AndAlso e.Column.DisplayIndex = 0 Then
e.Cancel = True
End If
End Sub
I hope this post help you too!
Best regards,
Ciro

Why does a standalone program created in Labview 8.5 try connecting to the internet when the program only reads data through the serial port? Firewalls object to progams that contact the internet without permission.

why does a standalone program created in Labview 8.5 try connecting to the internet when the program only reads data through the serial port? Firewalls object to progams that contact the internet without permission.
The created program is not performing a command I have written when it tries to connect to the internet, it must be Labview that is doing it. How do I stop this from happening?
Any help would be very appreciated.

It looks that way..
"When LabVIEW starts it contacts the service
locator to removes all services for itself. This request is triggering
the firewall.This is done in case there were services that were not
unregistered the last time LabVIEW executed- for example from VIs that
didn't clean up after themselves"
This is not yet fixed in LV2009.
Message Edited by Ray.R on 11-04-2009 12:25 PM

Data typed into this form will not be saved. Adobe Reader can only save a blank copy of this form.

This message is new. I have never had this issue before on my system. 3 days ago I created a PDF using LiveCycle Designer ES2 at my office - exactly like I have done for the past 2 years - and now I get this message when I try to open the PDF on my home system. I have always been able to work with these files until today. Yesterday I installed Office 365 and now I apparently have Reader XI on my system. Now every form I was able to open in the past will not allow data to save. What's the deal?

Printing: Allowed
Document Assembly: Not Allowed
Content Copying: Allowed
Content Copying for Accessibility: Allowed
Page Extraction: Not Allowed
Commenting: Not Allowed
Filling of form fields: Allowed
Signing: Not Allowed
Creation of Template Pages: Not Allowed
* This PDF form restricts some operations
This is all odd as this form is designed explicity with digital signatures, and has always worked; hundreds of people have used this form extensively since late 2012, and I have tested it hundreds of times - it has always worked, never had this issue. Unfortunately every PC in my home has Reader XI installed as of today (no Standard or Pro versions) and I will have to hunt for PCs that have only Reader (no Pro or Standard) at work.

Can iTunes only read / play its own Data Discs?

Correct me if I'm wrong -- but can iTunes only read / play Data Discs that it creates?
I've made Data CDs and Data DVDs from iTunes and it can read them once they're mounted.
But if I create a Data CD or DVD of the exact same files using Toast, iTunes won't read them.
What gives?

See Re: Why did iTunes 11.1 (126) delete all (SEVERAL HUNDRED) Podcasts?
tt2

Reader does only see my default printer (Vista)

Hi there
product version : 10.1.7
For now few days, I've ran into a weird issue. In my 80 users, only 1 got this issue, instead he have the same Adobe Reader version. He got a Vista on a Dell desktop computer.
As I changed his default printer, Adobe Reader will always shows up only the default printer in his printer list, but not the other ones, despite the fact that's every other softs' (Word, Excel, Autocad, etc ..) recognize every printers added in the Vista printer manager and can print properly.
All these printers are deployed through a server, and are not shared on his computer.
I tryed to uninstall/reinstall Reader, to downgrade it
to check the registry keys bounded to the ports, drivers and printer infos.
disable the enhanced security mode on Reader
reboot, redeploy printers on Vista
If someone got an idea or a hint, I would be grateful. Thanks for your help, I'm stuck around .
Regards,

Hi there
product version : 10.1.7
For now few days, I've ran into a weird issue. In my 80 users, only 1 got this issue, instead he have the same Adobe Reader version. He got a Vista on a Dell desktop computer.
As I changed his default printer, Adobe Reader will always shows up only the default printer in his printer list, but not the other ones, despite the fact that's every other softs' (Word, Excel, Autocad, etc ..) recognize every printers added in the Vista printer manager and can print properly.
All these printers are deployed through a server, and are not shared on his computer.
I tryed to uninstall/reinstall Reader, to downgrade it
to check the registry keys bounded to the ports, drivers and printer infos.
disable the enhanced security mode on Reader
reboot, redeploy printers on Vista
If someone got an idea or a hint, I would be grateful. Thanks for your help, I'm stuck around .
Regards,

Read access only

Dear Viewers,
When I am trying activate the funds management under the node
SPRO->Public sector management->Funds Management Government->Actual and Commitment Update/Integration-> Activate/Deactivate Funds Management.
Read access only
Message no. SV044
Diagnosis
You have attepted, in change or transport mode, to access data which
cannot be changed. This data can only be displayed.
System Response
The system has rejected the requested processing mode and switched to
display mode.
Procedure
You can either acknowledge the message to display the data, or cancel
processing.
Can I get any solution to solve this issue?
Thanks
Aswin

Dear expert
Please check this:
sm30 :View V_T001_FMACT should have 'Maintenance status' set to 'Read and
Change' instead of 'Read Only'.
This table is defaulted to Read only in the standard system
You can make this change through SE11-maint. status here you can change
Regards
Ajeesh.s

Why do I get IOException on nio read from channel before all data is read?

I am working on an NIO based http client library but I've noticed two problems.
#1: I have been testing against an http server that has authentication turned on. Hence, any request that comes its way will respond with a '401 Authentication Required' response. In the case of a POST, I've noticed that this particular http server does not wait for the body to arrive before responding. As soon as it gets the headers, it dumps the 401 response onto the channel and closes the connection. My library then gets an IOException on the next write to the channel even though I've received write interest event. (I'm using non blocking mode)
Whether I get the exception depends on timing. Sometimes, my writes work and the exception is averted. Sometimes not. The longer I delay since the time I get the write interest event, the more likely it is the exception will occur.
Now, in this situation, I really think it's the http server that is violating the http protocol. I give a valid content length that is not zero but it does not wait for me to finish my request. The moment I write the last empty line of the header section, it responds and closes the channel. Even though I don't think this is correct, my library has to deal with it. So in this situation, I've decided my library will abandon the write phase and move on to reading the response.
NOTE: In the majority of cases, a client would have already authenticated by landing on some page that could produce a POST in the first place. However, for technical reasons I can't mention here, I must support the case that the very first (unathenticated) request to the server is a POST.
2) After #1 above occurs, reading from the channel will also throw an IOException but only on Windows. Sometimes I get the headers only, sometimes the whole document, sometimes nothing. Again, the longer I delay reading (since the time I get the read interest event) the more likely it is the exception will be thrown. This NEVER happens on Linux. I always get the full response on Linux after the #1 happens even if I put long delays between reads.
I can understand #1 happening but #2 should not. I can always see the complete response data on the wire using a network protocol analyser. The data is there every time but my library doesn't always get it.
In situation 2, there is nothing I can do. If I don't receive the data, I have to respond with an error even though the request was successful.
I have stripped down my library to the bare essentials and can reproduce the problem in a self-contained environment every time.
Any ideas why the discrepency between Windows/Linux? Does this seem right?

I read through the section you mentioned. I realize the connection may be dropped at any time. Handling this is no problem. It is reported as an exception to the client. However, this situation is different. I still see no provision that allows a server to respond to a half written request. A request is defined to include an optional message body (Section 5). The client dictates whether it is optional, not the server. Furthermore, section 6 clearly states "After receiving and interpreting a request message, a server responds with an HTTP response message.". To me, this implies the server must wait for the entire request before responding even if its a waste of time. This particular server is attempting to short circuit what I see is the required request/response cycle. In doing so, it is causing me some pain in trying to deliver its response since it seems on windows this interferes with my ability to read it.
The simple answer to this is to process reads before writes, i.e. OP_READ before OP_WRITE. I tried this as well. Originally, I was not even registering READ interest while I was writing my request. (I saw no reason to. I don't want to give my client a response while they are writing their request.) But even when I do register READ interest while I'm writing (and process read events before write), the read event still produces no data and no eof (-1) indication on the read. The discrepency between linux and windows is bothering me. No matter what I do, I can't deliver the response even though its written to the channel by my peer. I think I will supply some code and see if anyone can get it to work on windows.Edited by: r2rossi on Sep 24, 2008 10:42 AMEdited by: r2rossi on Sep 24, 2008 10:43 AM
Edited by: r2rossi on Sep 24, 2008 10:45 AM
Edited by: r2rossi on Sep 24, 2008 10:46 AM

When I open an text-attachment sens by mail, I only get it in the modus 'only reading'. I can't find a tool to change that modus in so that I can work in it with my version Oracle Openofficie 3.3.

When I open attachments, send to me by two different emailprograms, I only get the 'only read'modus. So I am not able to work with the text.
I use the OpenOffice.org 3.3. from Oracle.

In technical support, sometimes you have to make educated guesses. I'm sorry that you were offended.
iTunes does prompt when it is going to erase a device, and the message is clear.
She said in her message that she was able to successfully sync the old ipad. This indicated to me that itunes wiping the data was not an issue, because either it had been setup at the apple store (in which case it doesn't actually wipe the ipad despite saying it will*) (*based on a single case I saw), or because the itunes media folder was migrated.
Furthermore, my solution was to tell her how to backup her ipad (by either doing it manually, or as a last resort, by deleting the corrupt backup -- that she couldn't access anyway.)
I got that last part of the instructions from the "Taking Control of your iphone" book which I found samples of when I did a google search for "corrupted backup itunes".
She marked this as a solution, so it worked for her.

... reading text file to load data

Hi all.
we have a requirement, acc to which we need to read a few tab delimited text file into oracle tables on daily bases.
i was trying to read it through the utl_file procedure, but while working i found out that there is a limitation in utl_file ... you can only read a complete line, and i had no clue how to use the delimiter to read each column and insert into database.
Another option i have is to use External table, use these text file as external table and insert data into oracle tables.
There is one problem where i got stuck, probably due to inexperience.
One of the files we recieve is like .
SID, teacher1_Name, teacher1_age, teacher1_sex,teacher2_name,teacher2_age, teacher2_sex......
while the table structure is like
SID Teacher_name, age sex .... ............
Now how can i insert the values for teacher1_age into age column...
so that my db table will be filled like
S1 teacher1_name teacher1_age teacher1_sex
S1 teacher2_name teacher2_age teacher2_sex
Please also suggest that is my method correct for reading these file by making them external tables and then inserting into our db tables.
The reason i cant keep the files is that the data comes daily with changed values, so we need to read them daily and then delete or replace with the new one coming with same name and struture the next day..
Regards

Look at SQL*Loader
See also an External Table Example

External Hard drive suddenly will only read! How can I make it read/write again?

Hi folks,
I'm working with a Seagate FreeAgent GoFlex 320gb External Hard Drive on the imacs here at my university. I have it formatted to ExFAT so that I could use it with my pc as well but I've never had to so far so it's only ever been used on the uni imacs.
It's been fine for working on media projects until suddenly when i came back to uni after the Christmas break I went to continue working on a film project and realised the external hard drive now said read only??
One thing I did was to put all of my work from last semester (which is everything that was on the hard drive into a single folder) could that have caused the problem?
And does anyone know how i can reset my permissions to read/write without causing damage or risk to the files on the hard-drive as I can't clear the disk (i have no where else to store the 185gb of video footage).
I'd really appreciate it if anyone could tell me how i can fix it? I know how to do all of this on my pc but i've no idea with the mac as i only use it for my media projects here in the university.
Thanks!
DrF ;-)

Out of curiosity , will this method also work for an external drive formatted to NTFS.. I have a lot of data that I have nowhere to Float while re-formatting the drive , so If this method would allow me to keep the data and still fix the problem that would be great !! At the moment the drive is formatted to NTFS and permissions say Read/Write , but I can only Read.. Very Frustrating as my mac drive is running low on space and performance is being affected.. Any help appreicated !!

External hard drive in "only read" permission

I have a macbook air and a sony external hard drive. Although my mac sees the hard drive i have permission to "only read". Why? How can I get it to work?

Hi i have same problem but quite different.. if anybody knows the resoultion please help me out.. i have 250 gb external harddisk drive was using for my perosnal in my mac book and i use for windows also. suddently i don't what's wrong with my mac.. today morning i connect to my mac book it shows the external drive is read only file system. i cann't able to write the data on it.But if i connect to some other macbook it works perfectly.. i did check for other external harddisk drive and pen drive . only in my mac it shows read. only.. please help me out this issue..

Adobe Customization Wizard X doesn't set Adobe Reader X to be default when customizing Acrobat X

I've recently started working with Adobe Customization Wizard X.
I've got Adobe Reader X customized and it's already installed all computers. Now, I'm working on customizing Adobe Acrobat X. During the customization, I only have the following 2 options:
1. Installer will decide which product will be the default
2. Make Acrobat the default PDF viewer
Choosing the 1st option, makes Acrobat as the default PDF viewer. In other words, I don't get an option to keep Adobe Reader X as the default on the existing computer.
Found a blog in Adobe site which suggests running Adobe Reader installation again after Acrobat is installed. Although it works, it just isn't a good solution (my opinion).
http://blogs.adobe.com/pdfitmatters/2011/03/installing-acrobat-x-and-reader-x-on-the-same- machine.html
Can you advise what're the registry setting that I can set during the Acrobat X customization so that it doesn't become the default PDF viewer.
Regards,
Parvez
Message was edited by: Parvez Akkas
Included the hyperlink to the blog that was mentioned

Hi Ben,
Here's what I am trying to accomplish I had Acrobat Standard v10.1.4 scripted so I can deploy it to a Citrix Server (XENAPP6) via SCCM 2007 I have at least 50 licenses of Acrobat Standard deployed to 50 users. All of our Citrix Servers have Adobe Reader v10.* installed as our default pdf viewer. There are other apps that are deployed to this Citrix Server and I wanted to make sure that pdf files open on Adobe Reader instead of Acrobat Standard.
I had to change the installer tables directly so I don't have to get it re-scripted to use this command line. Is it a best practice not to change the isntaller table?
msiexec /i "\\source\Acrobat10\AcroStan.msi" transforms="\\source\Acrobat10\AcroStan.mst" LEAVE_PDFOWNERSHIP=”YES” /qb /norestart
Thanks a lot for your help I'm looking forward to hear from you.
Regards,
William

How to hide save button / read mode only in browser adobe viewer?

Currently I embed a pdf to my website , the problem is, I would like to show the read mode only instead of a full tool bar to the visitor , also , I would like to hidden the save file option .
I checked there is an open parameter in the offical document that can specific
toolbar=1&navpanes=0&statusbar=0&messages=0
However, can I specific what opition is allow in the toolbar (actually I would like to allow only zoom function )
Are there any way to doing this? Thanks.
<object id = 'zoomPage' type='application/pdf' data= '" + sourceFolder + "/2013/08/17/0/0/A/Content/pdf/pdf_" + currZoomPageNo + ".pdf#toolbar=1&navpanes=0&statusbar=0&messages=0'><p>The PDF can not display</p></object>

Much of the documentation for Acrobat JavaScript has not changed and still operates exactly as it did with Acrobat 3.1 so it is possible that the old documentation is still valid. I have found that the Acrobat JavaScript Guide fro
version 5 has some very excellent documentation about the field object UI for the various form Fields.
If one goes to the Acrobat Developer Center and uses the Working with Distiller, Fonts and more and the uses the PDF Open Parameters one gets the documentation from the version 9.0 SDK form June 2008. This document probably has not been updated since then. Another issue to consider is the changes in IE, the number of new web browsers, and the introduction of HTML 5 all of which could change how parameters are passed or allowed. This technique has always been problematic.
Within an external viewer, it is not possible to show/hide the toolbars.
app.toolbar

DataSocket Read is only reading default Data

Similar Messages

Maybe you are looking for