Datasocket write error when launching an application

I have invested a lot of time in an applications that uses a number(>100) datasocket connections to exchange data between an application and plug in modules(called vis). I have two errors relating to the datasocket server for this application: 1.) When the server is started for the 1st time by calling the datasocket server control vi inside my code, I run a write function inside a loop for 10 iterations at 10ms intervals. No matter how I modify the number of iterations and frequency, the write function occasionally errors on first start up., and 2.) When I run the application using the Labview runtime engine(version 6.0.3) I see the same problem in addition to datasocket reads and writes not updating correctly. They do
not error but they do not exchange the correct data like they do when the full version of labview is installed on the machine.
Has anyone seen these problems before? Your help will be greatly appreciated.
Thank You,
Mike W

The export/import option for 3.0.7 are somewhat little brittle .
What I can suggest you is to upgrade your existing 3.0.7 to 3.0.9 atleast (if not 9.0.2) .
This version has got lot of new features which you are looking into.

Similar Messages

  • Getting error when launching Infoview application

    Hello,
    I am new to Crystal Reports, i installed Crystal Reports Server XI on Windows 2003 server with SP2 (64 bit), when i am trying to launcg Inforview application using the link:
    http://(my servername)/businessobjects/enterprise11/InfoView/logon.aspx
    i am getting the following error--
    Server Error in '/businessobjects/Enterprise11/InfoView' Application.
    Retrieving the COM class factory for component with CLSID {E2B9442B-2B4F-4D65-93D8-8368B13A6B95} failed due to the following error: 80040154.
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Runtime.InteropServices.COMException: Retrieving the COM class factory for component with CLSID {E2B9442B-2B4F-4D65-93D8-8368B13A6B95} failed due to the following error: 80040154.
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. 
    Stack Trace:
    [COMException (0x80040154): Retrieving the COM class factory for component with CLSID {E2B9442B-2B4F-4D65-93D8-8368B13A6B95} failed due to the following error: 80040154.]
       BusinessObjects.Enterprise.Web.AppPlugin.AppPluginFactory..ctor() +32
       WebDesktop.Global.Session_Start(Object sender, EventArgs e) +54
       System.Web.SessionState.SessionStateModule.RaiseOnStart(EventArgs e) +11154828
       System.Web.SessionState.SessionStateModule.CompleteAcquireState() +366
       System.Web.SessionState.SessionStateModule.BeginAcquireState(Object source, EventArgs e, AsyncCallback cb, Object extraData) +1281
       System.Web.AsyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +85
       System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +263
    Any idea how to resolve this issue.
    Thanks
    Vipin

    Recommend you post this query to the Business Objects Enterprise Administration forum:
    BI Platform
    Ludek

  • Error when launching Photoshop CS5

    Photoshop CS5 bring up the following error when launching the application
    "The program can't start because MSVCP110.dll is missing from your computer"
    Uninstalling and resintalling the application does not resolve this problem

    http://helpx.adobe.com/creative-cloud/kb/missing-msvcp110dll.html
    Mylenium

  • Error when launching promoted app from RemoteAPP

    Hi:
    We are receiving this error when launching any application from RemoteAPP, we tried promoting Calculator, Notepad, etc. and received the same error as well.
    "Personalization:
    This theme can't be applied to the desktop.
    Try clicking a different theme"
    Help!
    Thank you,
    Stangride

    If you launch the app directly from the session hosts using the same account that your using with remoteapp what are you getting? Try and RDP to the session host when you attempt it. I would also check rsop.msc to see if you have any GPO or scripts that
    are manipulating themes.

  • After Effects Plugin Error when launching

    I recently installed Red Giant Knoll Light Magic Pro plugin and get the following error when launching AE CS4 9.02 on a 2.53Ghz Intel Macbook Pro with 4Gb Ram and Snow Leopard.
    After Effects has encountered an error.
    [/Chincillada/pro/ext/adobe/MediaCore/MediaLayer/VideoFilterHost/Make/Mac/../../Src/AEPlug inVideoFilterModule.cpp-107]
    then I get:
    After Effects can't continue: An output contract violation has occured!
    then:
    After Effects warning: Failed to initialize mediacore
    I have also lodged a support ticket with Red Giant but wanted to see if anyone had experienced, or could shed any light on this error code.
    Thanks

    As a start, move the KLF plug-in out of the shared MediaCore folder (Library:Apllication Support:Adobe and something; not on my Mac ATM) to the conventional AE plug-in folder (Applications:Adobe After Effects CS4:Support Files:Plug-Ins) I've reminded my friends at RG a hundred times, but their installer stil luses bad default locations. If that doesn't fix it, then indeed you have a problem. Which version of the plug-in are you using? Most complaints revolve around v2.5's GPU usage, which is on by default and causes a lot of trouble. Older versions do not do this, so they are more stable....
    Mylenium

  • "Cannot Write" error when loading to FDM

    Hello,
    We have users who receive "Cannot Write" error when trying to load month end data to FDM.
    They used to be able to load data in the last 2 months and then it stopped.
    I was able to login myself and load the data on their behalf.
    Any idea where the logs might be to see the details of the error and why it stopped working all of sudden.
    Thank you for your help

    the most probable cause of the problem is the security in the target system application. your users may not have the rights to enter data for the intersections while you may have (may becasue you ahve admin rights)

  • Error when launching Crystal XIR2 report ..."Table could not be found."

    We have a customer that sees an error when launching any report in InfoView for Crystal Server XIR2:
    Description: Error in File E:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Data\slvnsb41.pageserver\slvnsb41.pageserver\child.2\temp\procReportTemp\mgrTemp\ps_13ec5b68e6bfbc0.rpt: The table could not be found.
    These steps have been taken:
    1) The Crystal Server Business View install and BIAR file imports are successful.
    2) Database connection has been configured and tested.
    3) All the tables are browseable in the Business View Manager and contain data.
    4) All the required tables exist in the database.
    Options or suggestions anyone?

    Can someone tell me how to open this as a SUPPORT CASE that someone will actually help solve? 
    Sorry to say but I don't find these forums of much use.

  • Error when launching a BPF

    Hi
    I receive the following error when launching af BPF:
    System.Exception: Index was outside the bounds of the array.
       at Microsoft.VisualBasic.CompilerServices.LateBinding.LateGet(Object o, Type objType, String name, Object[] args, String[] paramnames, Boolean[] CopyBack)
       at OSoft.Services.Webservice.BPFProxy.BPFProxy.GetBPFContents(String strAppSet, String strApp, String strBPFID, String strDataRegion)
    We are running BPC 5.1 SP09-2 and accessing Excel via Citrix.
    I did work before we applied SP09-2.
    Any suggestions?
    Jesper

    After upgrading the client installation on Citrix was not correctly upgraden. Re-installing the client fils solved the problem.

  • Error when launching Key figure monitor iview in portal

    Hi all,
    I get an error when launching a key figure monitor iview in portal ; the error is RABAX-STATE
    In r/3 under transaction ST22 i got following :
    "UNCAUGHT_EXCEPTION" "CX_WDR_RT_EXCEPTION"
    "CL_WDR_INTERNAL_WINDOW========CP" or "CL_WDR_INTERNAL_WINDOW========CM00B"
    "IF_WD_WINDOW~SUBSCRIBE_TO_BUTTON_EVENT"
    Anybody knows how to resolve the problem?
    Regards
    Gwen

    Hey was your problem resolved ???
    I am facing the same problem..
    please help!!!
    reply asap.
    ~Veena.

  • Error when launching Acrobat XI Pro

    I get an error when launching Acrobat XI Pro:
    Adobe License Utility has stopped working.
    A problem has caused the program to stop working
    correctly.  Please close the program.

    Hi toeneez,
    Please try repairing Acrobat and check.
    Try running the licensing fix patch available at : Error 213:19 | Problem has occurred with the licensing of this product | Acrobat X and XI
    Regards,
    Rave

  • Write errors when using non-administrator shared accounts

    Dear all,
    we're experiencing an apparently weird issue with our Xserve machines. The entire setup comprises of 4 Xserve, all of them running Lion Server, connected together and to the network of our institution through an Ethernet switch.
    I've set up an OpenDirectory master on one of these servers and created several shared user accounts for the various people working here (the /Users folder is hosted on that machine and shared across the other three). Users can access any of these machines via VNC.
    A few days ago a guy reported to me that he was getting random write errors when attempting to perform basic operations on his shared user folder (e.g., unzipping a file or running a software which write data on the disk). I had a look into it and found that the guy was right. When attempting to extract a zip archive (which, I'm absolutely confident, is a non-corrupted .zip file) from the Terminal - using his account - a few errors came out, like:
    error:  cannot create pybrain-pybrain-87c7ac3/pybrain/auxiliary/importancemixing.py
    error:  cannot create pybrain-pybrain-87c7ac3/pybrain/rl/learners/meta/meta.py
    Every single time I run the unzip command the errors are related to different files.
    Weirdly enough, the problem arises only when the user works on one of the three machines that don't host the shared /Users directory. Furthermore, it only applies to non-administrator accounts (if I try to perform the same operation using my admin account everything works smoothly, no matter on which machine I'm working). Promoting that guy to administrator (Server->Users->right click on the username->Edit User->Allow user to administer this server) made the problem disappear. Even more weird, after I removed the flag on "Allow user to administer this server" for that user, he is not experiencing the issue anymore.
    What the heck is going on?
    Cheers,
    Fabio

    1.  You can delete the Test1 and Test2 accounts if you log into your Administrator Account. Once in your Admin Account, open System  Preferences > Users & Groups and you will see and be able to delete the Test1 & Test2 accounts.
    2.  Leave your Guest account for, well, guest users.  Do not use it in the normal course of events.  When you log out of the Guest account, all the settings, caches, etc. are wiped, as are all files and folders that you may have saved in the Guest account home folder.  The Guest account is truly designed only for temporary, guest use.
    3.  Leave your Administrator account for use only for installing programs, doing system administration, managing accounts, etc.
    4.  User your named account as your regular account.  It appears to already be a User account.  The primary limitation is you cannot install programs in a regular User account.  This actually helps protect your Mac from viruses and other malware that would need to install software in order to corrupt your system.
    5.  You can turn off the need to enter a password when your computer sleeps in System Preferences > Security & Privacy > General.  UNcheck the option called "Require password for sleep and screen saver."

  • Get_Block Error when installing an application

    Hi all,
    I tried to recover a backup I had made some days ago, and I got the following error when installing the application:
    Error GET_BLOCK Error.
    ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 34, column 68: PLS-00103: Encountered the symbol "&" when expecting one of the following: ) , * & = - + < / > at in is mod remainder not rem <an exponent (**)> <> or != or ~= >= <= <> and or like like2 like4 likec between || multiset member submultiset <pre> <br>begin <
    I looked in the .sql application and searched for the """ or even for the symbols &" and I found nothing. I checked the character set and it seems right, the application is in UNICODE-UTF8 and the database is in UTF8 as well. I'm working with APEX version 4.1.1 and apex listener 1.1.
    Has anyone got this error before, or does anyone have a tip on where to investigate?
    Thanks in advance.
    Elena.

    For those who have gotten this error as well..
    The problem was in the buttons Expand /Collapse that I had in some trees. I had them with a redirect url pointing to a javascript code like this:
    javascript.apex.widget.tree.expand_all('id');I changed these buttons, I set an action "Defined by a Dynamic Action". This DA is called when the button is clicked and executes this javascript code:
    apex.widget.tree.expand_all('id');Now it works. Hope it can help someone.
    Elena.

  • Java Error when launching BLS

    Using xMII 11.5 SP3, one of our other xMII developers is getting the following Java error when launching the BLS editor:
    Unable to load resource: http://xmiid.oxy.com/Lighthammer/CMSLogicEditor/activation.jar
    His computer was reimaged a couple of days ago with our standard image (Windows XP SP2, IE6 SP2).  It worked fine on his computer prior to the re-image.  He's reloaded Sun Java 1.4.2_01 on his computer (our company default is 1.4.1_01.)
    I can't duplicate the error on any of our test computers - one of which was also recently re-imaged.
    Any ideas?
    David

    David,
    So other standard imaged machines are running 1.4.2_01 and have no issues?  I would expect to see problems with the webstart cookie handling for that version, but I'm running _15....
    Try clearing the Java WS cache on the problematic client instance to watch it try to download all the libraries fresh.
    File...Preferences, reconfirm that the None radio button is selected on the General tab, and then on the Advanced tab, press the Clear Folder button.
    You could also make sure before hitting the editor link in the Menu.jsp that there are no dead or leftover javaws processes running in the task manager.
    Regards,
    Jeremy

  • Adobe Premiere Pro error when launching software...

    I am getting the following error when launching Adobe Premiere Pro CS6:
    Adobe Premiere Pro could not find any capable video play modules. Please update your video display  drivers and start again.
    I checked my drivers and they are up-to-date. I am using Core I7 Windows 7. I did have Adobe Premiere CS5 installed and it worked fine. When I subscribed to the Creative Cloud I uninstalled the CS5 installation and downloaded the CS6.

    Try http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html

  • How do I fix a "medium write error" when I try to burn a MP3 CD?

    how do I fix a "medium write error" when I try to burn a MP3 CD?
    Thanks,
    Jackie

    First, update your Mac OS 10.6.8 (Apple menu Software update).
    If that doesn't do it, try a different brand CD-R.

Maybe you are looking for