Error when launching promoted app from RemoteAPP

Hi:
We are receiving this error when launching any application from RemoteAPP, we tried promoting Calculator, Notepad, etc. and received the same error as well.
"Personalization:
This theme can't be applied to the desktop.
Try clicking a different theme"
Help!
Thank you,
Stangride

If you launch the app directly from the session hosts using the same account that your using with remoteapp what are you getting? Try and RDP to the session host when you attempt it. I would also check rsop.msc to see if you have any GPO or scripts that
are manipulating themes.

Similar Messages

Error when launching BEx analyzer from Portals

BI Gurus...
We are working on an initiative to migrate our user interface from SAP GUI to Enterprise Portal.
Bex Analyzer is primary mode of reporting at this time.
After importing the Roles into EP, I am able to execute the web queries successfully, in the BEx Wen analyzer. But, I get an error when I click on any of the excel workbooks. Our expectation was that once we click on the excel workbook name, the BEx analyzer will launch from EP. But it seems like the issue is with launching BEx Analyzer from BI Portal.
Has anyone faced this issue before?
Is it possible to launch BEx Analyzer from EP?
Are their some key portal settings we have missed out on to enable launching BEx analyzer from EP?
Please provide your thoughts/experience.
Thanks,
Ajay.

Hi WernerS,
Thanks for your response.
The RRMXP Transaction works and it launching the BEx Analyzer as expected.
Now, as per our research, I think there are 2 ways of launching BEx analyzer from BI Portals.
1) Call via a URL
You can call BEx Analyzer via the following URL: http(s)://<server:port>/sap/bc/bsp/sap/rsr_bex_launch/bexanalyzerportalwrapper.htm
You can modify the URL to open BEx Analyzer with either a workbook, a query or a query view. You can use the following parameters to do this:
●      Parameter to open the workbook: ?WBID=<wb_id>
I have tried calling via URL iView, but instead of launching the BEx Analyzer, it just throws a dialog box to "save" or "open" a file, RRMX.bex. When I try to open this file, it says "Invalid File Format".
I tried opening the file in notepad and I see the following parameters passed.
           test
           Data=BX2,CONAJP,EN,mikoyan,17,,,250,
           9
Any clue about what I am doing wrong?
2) Calling via a Transaction
You can generate BEx Analyzer in Portal Content Studio as an SAP Transaction iView.
The iViews are of type SAP Transaction iView and have the code link com.sap.portal.app integrator.sap.Transaction.
The most important properties are System, Transaction Code (TCODE) and ApplicationParameter.
●      The Transaction Code for all workbooks is RRMXP.
●      The ApplicationParameter property contains the value WBID=<WORKBOOK_ID>.
I have tried this approach as well. When I open this iView, I see the RRMXP transaction in the Internet explorer, but the workbooks still does not open in the BEx Analyzer (Excel)
Any thoughts on where am I going wrong ?
Thanks,
Ajay.

Error when launching .rdp file from RDWebAccess with RD Gateway "NtlmWebAuthException: 2" on Mac Version 8.0.8 (Build 25010)

When launching a .rdp file that has been download from an rdwebaccess session, the following error is generated "NtlmWebAuthException: 2". I have tested this on the Mac Microsoft Remote Desktop client version 8.0.8 (Build 25010).
The following is the use case:
Download the .RDP file for a published app "notepad.exe", on rdwebaccess (2012R2), accessed through the gateway (2012R2) VIA the connection broker (2012R2) on a RDSH server (2012R2). NLA is enabled everywhere.
This same setup works on Windows using the Remote Desktop Connection client.
I found that if you edit the .rdp file and add the following line (no quotes):
"username:s: "
Then the user is prompted for credentials. You may also set it to be "username:s:domain\username".
This issue here appears that the Mac client is either ignoring the "prompt for credentials on client:i:1" setting, or it is passing blank credentials... or both.
I appreciate all the work the MS team (and iTap) have done on this product... keep up the great work.
Example failing RDP file:
redirectclipboard:i:1
redirectprinters:i:1
redirectcomports:i:0
redirectsmartcards:i:1
devicestoredirect:s:*
drivestoredirect:s:*
redirectdrives:i:1
session bpp:i:32
prompt for credentials on client:i:1
span monitors:i:1
use multimon:i:1
remoteapplicationmode:i:1
server port:i:3389
allow font smoothing:i:1
promptcredentialonce:i:1
videoplaybackmode:i:1
audiocapturemode:i:1
gatewayusagemethod:i:1
gatewayprofileusagemethod:i:1
gatewaycredentialssource:i:0
full address:s:RDCB.COMPANY.COM
alternate shell:s:||Notepad
remoteapplicationprogram:s:||Notepad
gatewayhostname:s:rdgateway.COMPANY.com
remoteapplicationname:s:Notepad
remoteapplicationcmdline:s:
workspace id:s:RDCB.COMPANY.com
use redirection server name:i:1
loadbalanceinfo:s:tsv://MS Terminal Services Plugin.1.Notepad
alternate full address:s:RDCB.COMPANY.COM
signscope:s:Full Address,Alternate Full Address,Use Redirection Server Name,Server Port,GatewayHostname,GatewayUsageMethod,GatewayProfileUsageMethod,GatewayCredentialsSource,PromptCredentialOnce,Alternate Shell,RemoteApplicationProgram,RemoteApplicationMode,RemoteApplicationName,RemoteApplicationCmdLine,RedirectDrives,RedirectPrinters,RedirectCOMPorts,RedirectSmartCards,RedirectClipboard,DevicesToRedirect,DrivesToRedirect,LoadBalanceInfo
signature:s:ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB

Hi,
I too have this problem but I am unsure of how you fo about adding the "username:s:domain\username"
into the file as it is downloaded via the RD Web Access page.
I know that I can edit the RDP file after the event and then send it to my users but I don't want the
hassle of doing this,
The weird thing is that ver 8.0.8 release notes say that there is a "Fix for the issues of starting remote connection from RDP files that included gateway information"
Anybody have any ideas?
Thanks,
Jaggie

Logon failed error when launching Web Intelligence from InfoView

After changing the Web Intelligence preferences in BusinessObjects Enterprise XI 3.0 Java InfoView to launch the desktop or rich client option, I get a "logon failed" error message. However, when I launch Web Intelligence Rich Client from 'Start > Programs >...' directly, the same logon information is successful. The logon is set to use Enterprise authentication which is the same logon information used to launch InfoView and Web Intelligence.
Why does the logon fail when I launch Web Intelligence from InfoView?
Edited by: Ana on Mar 31, 2009 3:43 PM

I deleted the report completely and rebuilt it from scratch, and also added names for the data table and data set generated within the project and finally, success!
Jason, thanks so much for your help which got me moving on this again.

Javascript error when launching XFA pdf from browser

Hi all,
I am trying to use my XFA PDF from a browser. On my local system I have set up a web server and am launching my PDF from there. However, I am getting a ReferenceError with regards to one of my Javascript functions.
My PDF has dependency on a javascript file that resides in the Acrobat path as follows:
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\Javascripts\
When I use my PDF directly from an Acrobat instance, everything works fine. The issue comes up only when launching from server. How do I link the javascript file to my PDF?
Edit: The user is going to be launching the PDF from the server via a web browser. In such a case where do I place the javascripts?
Help appreciated,
Thanks

@George: thanks for the quick response!
My JS code contains a readFileIntoStream which I learnt is also to be run under privileged context. (still learning the ropes here.. ). I have been trying to incorporate the JS code directly into the PDF to get around this privileged context.. but I am unable to find a non-privileged equivalent for readFileIntoStream..
Basically my users would be accessing the PDF from the server direct via the browser. For my testing purposes I am able to run the PDF directly from my desktop via an Acrobat instance without any hitch as the scripts are folder level like you mentioned. Is it possible for the users to be able to access the javascripts from anywhere on the server rather than directly from the PDF? Please note, users will not be saving copies of the PDF on to their local machines (in which case we could have pushed the JS file along to their machines) . I need to ultimately run the PDF from browser.
I hope I am clear..
Thanks.

Citrix receiver throws "ssl initialisation error 8" when launching citrix apps from firefox on Windows

Hi all,
I recently switched over to mozilla firefox from google chrome as Google has now disabled NPAPI and thus allowing me the inability to launch citrix applications.
I have installed the latest version of firefox and have the latest version of citrix receiver. When i login to my citrix site and try to launch the citrix applications, nothing happens. When i manually launch the ica file, i receive the error. "Unable to connect to the Xenapp server. SSL initialisation error 8".
Please help as i need to get this up and running by this week.
Thanks.
Regards,
Ochen

Unfortunately we can't support plugins here. While still working (some of the time) in Firefox, NPAPI is officially considered legacy, and thus not supported, in Firefox.
I suggest working with Citrix or using Internet Explorer to run XenApps.

Show the error when buy any app from credit card.

Hi,
I am facing a problem while I buy any app the moment I click on purchase it open up some new contract of blackberry and keep on seaching my data of the credit card . It appears with my data after very long time n then whn I click on purchase it says that its an error purchase the app at the moment pl try again later.
I change my credit card infomation also but I still face the same error.
Anyone with a handy piece of information will be great!!!!!!

altafmubarak wrote:
I tried to follow the instruction as mention in the error details but the sollution which is mention there nothing works. if this is any thing realted to reformat the device and install the software all fresh again ...........may be?
If you mean to now say that you have performed some OS reload or other function on your device (there is no such thing as "reformat" on a BB), then that possibly could be causal. As such, I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Batt Pull Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Application Launch Failure error when launching various apps

When trying to open several different apps, an error message "Application Launch Failure" displays. The text of the message is:
The application "Flash Professional" could not be launched because of a shared library error: "<Flash> <CarbonLib> <CFMPriv_OpenScripting> "
The application listed depends on the one I am trying to launch. For example, when I try to launch Word the message is:
The application "Word" could not be launched because of a shared library error: "<Word> <CarbonLib> <CFMPriv_OpenScripting> "
I have not made any recent changes to my system and do not know how to resolve. Any suggestions?
Thanks!

I am having the same issue with my Mac Power PC G4. "The application Excel could not be launched because of a shared library error: 2<application><CarbonLib><CFMPriv_LaunchServices>"
I was reading your advice above. I don't have Leopard yet, so I was hoping there was a way to fix this problem with out moving to Leopard.
Also one more thing. This problem started after I did the newest Safari update. Not sure if that has anything to do with it, just thought you might need to know that.
Any help you could give me would be great!

Parameters not set error, when launching jdev 9i from Unix

Hi,
I have downloaded the patch to install jdeveloper ( p4141787_11i_GENERIC.zip )
and ftp'ed to Unix directory and unzipped.
I have modified the jdev.conf to the location where SDK is installed. we are using SDK version 1.4.2.06
I have set up the variable, JDEV_USER_HOME
When I run the jdev.exe script from jdevbin/jdev/bin
. jdev
I get the below error, saying that the parameters are not set.
Oracle9i JDeveloper
Copyright 1997, 2003 Oracle Corporation. All Rights Reserved
sh: JDEV_NATIVE_PATH: Parameter not set.
sh: JDEV_VERBOSE_MODE: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_NATIVE_PATH: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_APP_OPTS: Parameter not set.
sh: JDEV_VERBOSE_MODE: Parameter not set.
sh: JDEV_JAVA_VM: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JAVA: Parameter not set.
Appreciate your help.
Thanks
Srini Pendem

Hi,
If this is happens only with services view bills, view consumption history.. or this happens for every other service if you are trying to access 5 minutes after logon.
Have to restarted your ITS server after changing these parameters.
well i am not aware of any ITS based service Bill.. can you please help me out.. if this is part of ESS/MSS service.
regards,
Sudhir

Error when launching flex App?

ReferenceError: Error #1056: Cannot create property reserved
on _index_mx_managers_SystemManager.
What does this error mean? I have been debugging it for about
a week now :)

no line, it just gives me that error every once in a while
when the application is originally launched, but not every
time.

Security error running launching native app from applet

Hi,
I am tying to write a small applet to launch a local application. I use
Runtime rt = Runtime.getRuntime();
rt.exec(application);
and I get a java security error:
Failure: java.security.AccessControlException: access denied (java.io.FilePermission C:\Program execute)
is there a way to go around this problem??
thanks so much for the help

You may use the <DRIVE>:\Program Files\JavaSoft\JRE\<version>\bin\policytool.exe to edit the file.
Where can I find the functional "java.policy" file ? In <DRIVE>:\Documents and Settings<...> or in <DRIVE>Program Files/JavaSoft/JRE/<version>/lib/security/java.policy ?
What's the difference between the two files ?

Error when launching WDA app on IE8 with HTTPS - u201Cres://ieframe.dllu201D.popup

ECC 6.0, NW 7.0 SP20, Internet Explorer 8.0
I have a web Dynpro ABAP application being hosted on portal using an Iview.
The web AS protocol for the system is set to HTTP under System Administration.
I have 2 sets of users accessing this application, Internal and external users.
Internal Users login via intranet on to the portal with Http and the application works fine.
External Users login via an HTTPS site and they get the following popup.
u201CDo you only want to see the secure content u2026.u201D
On clicking yes u201CNo Information is displayedu201D on clicking NO we get another pop up which reads
u201CThe current webpage is trying to open a file on your computer
Do you want to allow this?
Current site :<>
File: res://ieframe.dllu201D
Clicking on yes or no, we get the browser error.
I tried changing the web AS protocol in system properties to HTTPS.
Then the internal users started receiving the 2nd popup about u201Cres://ieframe.dllu201D.
External users also received the same popup but the first pop was gone.
I read a few blogs which suggested making some changes in internet explorer security setting for trusted sites and also about resetting all zones to default levels. But the WDJAVA applications work fine for http as well as https.
I need to run my WDA application on http as well as Https so that internal and external users can access it. Is there any setting that can be done from Visual admin or elsewhere to get this working?
Can any of the experts please advice on this situation?
Regards
Vikas

The only way this might be possible is by using the HostContainer object
to access the HTML page and do it from there.

Error when launching Photoshop CS5

Photoshop CS5 bring up the following error when launching the application
"The program can't start because MSVCP110.dll is missing from your computer"
Uninstalling and resintalling the application does not resolve this problem

http://helpx.adobe.com/creative-cloud/kb/missing-msvcp110dll.html
Mylenium

Lost of Sounds when launching an App

Yesterday I noticed that when launching an App such as Crazy Birds or Fragger, or etc. that the sound is now missing. From the desktop I can adjust the sound to the max rating but when an App is launched, the sound is no longer adjustable and the play is on mute. This is happening on two IPads. Anyone else experiencing this? Ipod and Video play work ok.

If you're talking about the "alert" sounds (rather than regular volume such as for music), flip the switch next to the volume controls.

App crash when after update app. from App Store

Hi all,
I have some issue when after update app from App Store.
The issue happened since I registered the last update recently.
Here are the logs from iPhone console:
Jun 28 18:15:45 Rahul-Singhs-iPad backboardd[27] <Warning>: Application 'UIKitApplication:com.tabsfmiPad.tabsBi[0xb917]' exited abnormally with signal 11: Segmentation fault: 11
Jun 28 18:15:45 Rahul-Singhs-iPad ReportCrash[163] <Error>: libMobileGestalt copySystemVersionDictionaryValue: Could not lookup ReleaseType from system version dictionary
Jun 28 18:15:45 Rahul-Singhs-iPad ReportCrash[163] <Notice>: Saved crashreport to /var/mobile/Library/Logs/CrashReporter/TabsBi_2013-06-28-181544_Rahul-Singhs-iP ad.plist using uid: 0 gid: 0, synthetic_euid: 501 egid: 0

Try resetting your iPad > iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
If that doesn't help, restore to factory settings.
Tap Settings > General > Reset > Reset All Settings

Error when launching promoted app from RemoteAPP

Similar Messages

Maybe you are looking for