"Datasource" or "Tx Datasource" for Local Transactions

I am wondering whether I should use a "Normal DataSource" or "Transactional DataSource"
Object in my EJB deployment.
According to the docs, Tx Datasources are needed only for distributed transactions.
For local transactions Datasource is recommended. I need only local transactions
and
initially used a non-transactional datasource.
The problem I came across is that WL6.1 doesn't set the ISOLATION LEVEL as specified
in the deployment descriptors when a normal Datasource object is used.
When I switch to Tx Datasource - isolation is set properly.
Has anyone encountered this and is it a bug or am I not understanding the
documentation correctly.
Thanks, Samuel Kounev

and combine LO DS with AP/AR and GL through infoset or mutiprovider...
You need to look for these KPIs in different datasources...and then link them.
Regards,
Ashish

Similar Messages

Can't add datasource for local SQL Server Express

I can't get new datasource to connect to a local SQL Server Express (2008).
On SSE, I enabled non-NTLM authentication, created an account specifically for CFServer, and was able to log into SQL Server through Management Studio. But the datasource still won't connect.
When I enter computerName/SQLServerName for the Server, I get a message saying "...The requested instance is either invalid or not running."
When I enter just SQLServerName, message says "Error establishing socket. Unknown host: SQLServerName."
When I enter (local), I get a message saying "Error establishing socket. Unknown host: (local)"
When I enter 127.0.0.1, message says "Error establishing socket to host and port: 127.0.0.1:1433. Reason: Connection refused: connect"
I don't know why the first is considered invalid, or why the fourth is refusing connection. Am I forgetting something?

I found the solution, which doesn't have to do with Coldfusion, but rather with configuring SQL Server for TCP/IP. In case someone else ever stumbles upon this post with a similar problem, I wrote about it at http://forums.devshed.com/ms-sql-development-95/trying-to-connect-to-sql-server-on-localho st-1433t-958558.html.

What driver and DataSource for EJB transactional semantics?

Hi people.
Joe Weinstein clarified a point that should be much clearer in the online docs:
"If you want EJB transactional semantics, you must use a TxDataSource."
I'm not clear about the relationship between TxDataSource and XA-drivers. I want
transactional EJB semantics.
So I must use TxDataSource.
Must I use XA-enabled drivers too?
What drivers can I use for Oracle?
Thanks, Alex

Hi Alexander,
You need to use XA driver in case you need truly distributed
transactions (spanning multiple databases instances).
Otherwise you could use non-XA driver with TxDataSource.
weblogic will simulate XA behavior. It will work for single
db instance.
Regards,
Slava Imeshev
"Alexander Bunkenburg" <[email protected]> wrote in
message news:3cd15be6$[email protected]..
>
Hi people.
Joe Weinstein clarified a point that should be much clearer in the onlinedocs:
>
"If you want EJB transactional semantics, you must use a TxDataSource."
I'm not clear about the relationship between TxDataSource and XA-drivers.I want
transactional EJB semantics.
So I must use TxDataSource.
Must I use XA-enabled drivers too?
What drivers can I use for Oracle?
Thanks, Alex

Datasource for BUS2000249 business transaction catagory.

Hi Experts,
I am working on CRM extraction, I need to capture the data from T-Code CRMD_ORDER screen in crm.
As data is catagorised according to tranasction catagory , I know that 0crm_sales_act_1 holds the data for
business transaction object type is BUS2000126.
Similarly I want to know which CRM datasource hold data for BUS2000249 business transaction catagory.
Acthually i need to capture the Contract data in CRM.
Thanks
Mayank

there is no such BC for vendor available but still you can check out 2LIS_02_S013, 0MM_PUR_VE_01
and 0MM_PUR_VE_02. They may help.
for me its good to go for a custom extractor with View based on those table. that will be quick and best.

Can V find Master data datasource by having Transaction data datasource?

Hello All
I have a datasource in r/3 side by this can v find Master data datasource?
The Transaction datasource is 2lis_02_scl?
how to find Master datasource for this?
Many Thanks
balaji

AHP hello
Thanks for info given
Can v view same for customized datasources also?
is it possible?
so for datasource 2lis_11_vaitm,if v click on "Infosource Overview" v can view all the Infosource name,by this v can find our Master Datasource.?
so for ex.,I can c infosource 0CUST_GRP1,so this is the datasource for Master data from r/3 side?
Is it correct?
Many Thanks
balaji

DataSource for FAGLFLEXT and BSEG, or New Table in ECC6?

need to create an extractor to have all the information of FAGLFLEXT, because we need to keep the ledger information and the split of the information. However, we need to add 13 fields contained in BSEG.
Therefore we thought to reads the line items table FAGLFLEXA, and then enhace it throught BSEG table.
However, since we are using ECC6 and BI7. It is not support the creation of DataSources for FAGLFLEXA throught FAGLBW03.
Is it an option to incorporate all fields into FAGLFLEXT.
Can we creat a new table group based on FAGLFLEXT, and then adding the coding block extensions to that table -
how does new g/l and the new table group work in parallel? Which is the procedure to do it?
Documentation says we can create a new table group based on FAGLFLEXT --- its the how does it work in conjuction part...for example...the new g/l handles document splitting and one other thing georg referenced last night...will the split documents go into our new table group?
BSEG does not have the document splitter information that we need (it's incomplete data). It's missing profit centers on many items, it's missing the proper split of transactions.
Thanks for your comments.

Here is more information about this post.
Client situation: Our client is implementing ECC 6 and is using the "New-GL" features. Because of business requirements, the coding block has been extended (not insignificantly - 18 extra fields at the moment) to accommodate legal, regulatory and management reporting. The reporting solution includes standard ECC reporting (e.g. report writer, report painter reports) as well as feeds to BW (BI 7).
The Challenge: Our understanding is that adding all of the coding block extensions to the New-GL tables (ie. FAGLFLEXA and FAGLFLEXT) may lead to performance degradation in the ECC system. However, we still need to accommodate the requirement to report by the additional dimensions that are not currently included in the New-GL, so our challenge has been to find a solution that minimizes performance issues, while still allowing us to have all the necessary dimensions with which to do the required reporting.
What we would like to know: How have you handled this in similar situations?
Have you added to the New-GL tables? How many fields? Performance issues encountered?
Have you created additional table group(s) based on the New-GL and then modified that structure to have the new fields? How does the additional table group work co-incident with New-GL (e.g. does the additional table group receive document splitting information?)?
Have you created custom extractors for BW? On what basis (we understand that FAGFLEXA cannot be created as a datasource to feed BW)?

How to use DataSource and External transaction in 9ias?

I'm working on a project that the application server needs to connect to over 100 databases.
I'd like to use connection pooling and external transaction service defined in OC4J's Datasources.
I wonder if anyone has an example of using datasource and external transaction service for OC4J.
Right now, I export toplink project to a java source and do the initialization there manually but I don't know how to use Datasource to get connections and how to use the external transaction service in the java code for OC4J.
I really appreciate you help.
Wei

Here is a fill in the blank example on how you could set this up through code:
Project project = new MyProject();
// alternatively, use the XMLProjectReader
server = project.createServerSession();
server.getLogin().useExternalConnectionPooling();
server.getLogin().setConnector(new JNDIConnector(new javax.naming.InitialContext(), "jdbc/DataSourceName"));
// the next line depends on the type of driver you want to use.
server.getLogin().useOracleThinJDBCDriver();
server.getLogin().useOracle();
server.getLogin().setUserName("username");
server.getLogin().setPassword("password");
server.getLogin().useExternalTransactionController();
server.setExternalTransactionController(new Oracle9iJTSExternalTransactionController());
server.logMessages();
server.login();

Shall I use one datasource for multiple connection pool?

Hi,
I need to clarrify that, Shall I use one Datasource for multiple connection pool in distributed transaction?
Thanks with regards
Suresh

No. If its transactions across multiple databases you should use different datasources.

How to create a datasource for 0COSTCENTER to load data in csv file in BI

how to create a datasource for 0COSTCENTER to load data in csv file in BI 7.0 system
can you emil me the picture of the step about how to loaded individual values of the hierarchy using CSV file
thank you very much
my emil is <Removed>
allen

Step 1: Load Required Master Data for 0CostCenter in to BI system
Step 2: Enable Characteristics to support Hierarchy for this 0Cost Center and specify the External Characteristic(In the Lowest Node or Last Node) while creation of this Characteristic InfoObject
Step 3: On Last Node of Hierarchy Structure in the InfoObject, Right Click and then Create Hierarchy MANUALLY by Inserting the Master Data Value as BI dosent Support the Hierarchy load directly you need to do it manually....
Step 4: Mapping
Create Text Node thats the first node (Root Node)
Insert Characteristic Nodes
Insert the Last Node of the Hierarchy
Then you need to create a Open hub Destination for extracting data into the .csv file...
Step1 : Create the Open Hub Destination give the Master Data table name and enter all the fields required....and create the transformations for this Open Hub connecting to the External file or excel file source...then give the location on to your local disk or path of the server in the first tab and request for the data...It should work alright let me know if you need anything else...
Thanks,
Sandhya

Change a migrated DataSource for DB Connect Source System

Hi,
I have created a DataSource for a DB connect Source system with transactioncode RSDBC as follows:
1. select database TableView
2. choose Edit DataSource
3. fill in the field Application Component (default stated NODESNOTCONNECTED)
4. generate datasource
Result: the datasource has been created in the right application component. As I want to migrate to BW 7 I have migrated the datasource (with export) and afterwards activated it. Now we need to add more fields to the database TableView. After the fields have been added I want to make these fields also available in the DataSource created before.
How can I do this ?
When using transaction code RSDBC I found out that the application component is stated again NODESNOTCONNECTED instead of the application component filled before. Is it possible that changes in the TableView will always lead to create the DataSource all over again (new InfoPackage, new Transformation rules, new DTP).
Thank you in advance for your help. Kind regards, Minouschka

Hello,
We have basically the same problem. An existing data source from a DB-connect client and now need to add a new field but edit mode BW does not provide the ability to add or delete existing fields.
Were you able to complete this and if so how did you do it?
Thank you,
Rick

What is the related datasource for VBKD

Hi,
what is the related datasource for VBKD( Sales doucmentation business data).table.please give me solution.
Thanks,
chandu

Hi,
Also check these DS. In the links check the table Fields of Origin for the Extract Structure
Extraction SD Sales: Document Schedule Line
DataSource Transactional Data: 2LIS_11_VASCL
http://help.sap.com/saphelp_nw70/helpdata/EN/dd/db9e759d4f453a8e081ad7df5f7770/frameset.htm
Extraction SD Sales: Document Item
DataSource Transactional Data: 2LIS_11_VAITM
http://help.sap.com/saphelp_nw70/helpdata/EN/3a/27b6962129448ebe71fd945cfa8823/frameset.htm
Extraction SD Sales: Document Item Billing
DataSource Transactional Data: 2LIS_11_V_ITM
http://help.sap.com/saphelp_nw70/helpdata/EN/94/5780aeec7d43d9be78b05fd4b3212e/frameset.htm
Extraction SD Sales: Document Schedule Line Billing
DataSource Transactional Data: 2LIS_11_V_SCL
http://help.sap.com/saphelp_nw70/helpdata/EN/41/938d9c476c4ed6a9eed87b59ae19ac/frameset.htm
Hope this helps.
Thanks,
JituK

Datasource for Purchasing Source List

Hello Guys
i need to find datasources for "purchasing source list" that are stored in EORD table ( you can see these data with transaction ME03, ME01).
Any one knows the datasources to keep these data in BW ?
thanks in advance
Boris

Hi,
Please find the code below .
REPORT ZSOURCE.
TABLES: EORD,
        EINA,
        MARC.
Batch Input Name
PARAMETERS P-BTCHSN(12)            DEFAULT 'ME01'.
Vendor Code
PARAMETERS P-LIFNR LIKE LFA1-LIFNR DEFAULT 'XXXXX'.
Material Group
PARAMETERS P-MATKL LIKE MARA-MATKL DEFAULT 'XXXXXXX'.
Plants
PARAMETERS P-WERKS LIKE EORD-WERKS DEFAULT 'XX'.
Tick Block/Untick Unblock
PARAMETERS P-NOTKZ LIKE EORD-NOTKZ DEFAULT 'X'.
Auto / Manual run the Batch Input Program
PARAMETERS P-RUN   AS CHECKBOX     DEFAULT 'X'.
INTERNAL TABLE FOR DATA
DATA: BEGIN OF ULTAB OCCURS 50,
         MATNR LIKE EORD-MATNR,   "Material No.
         WERKS LIKE EORD-WERKS,   "Plants
         ZEORD LIKE EORD-ZEORD,   "NO
         LIFNR LIKE EINA-LIFNR,   "Vendor Code
       END OF ULTAB.
INTERNAL TABLE FOR BATCH INPUT DATA
DATA: BEGIN OF IPUTTAB OCCURS 50.
        INCLUDE STRUCTURE BDCDATA.
DATA: END OF IPUTTAB.
INTERNAL TABLE FOR BATCH INPUT ERROR MESSAGE.
DATA: BEGIN OF MESSTAB OCCURS 50.
        INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF MESSTAB.
DATA: C_TAXKM LIKE MG03STEUER-TAXKM VALUE '1',
      W-LINE-NO TYPE I.
REFRESH ULTAB.
SELECT * FROM EINA WHERE LIFNR = P-LIFNR
                     AND LOEKZ = SPACE.
SELECT SINGLE * FROM MARC WHERE MATNR = EINA-MATNR
                              AND WERKS = P-WERKS.
CHECK MARC-LVORM = SPACE.
CLEAR ULTAB.
SELECT * FROM EORD WHERE MATNR = EINA-MATNR
                       AND WERKS = P-WERKS
                       AND LIFNR = P-LIFNR.
     ULTAB-MATNR = EORD-MATNR.
     ULTAB-WERKS = EORD-WERKS.
     ULTAB-ZEORD = EORD-ZEORD.
     ULTAB-LIFNR = EORD-LIFNR.
     APPEND ULTAB.
ENDSELECT.
IF SY-SUBRC = 4.
     ULTAB-MATNR = EINA-MATNR.
     ULTAB-WERKS = P-WERKS.
     ULTAB-ZEORD = ''.
     ULTAB-LIFNR = EINA-LIFNR.
     APPEND ULTAB.
ENDIF.
ENDSELECT.
CHECK WHETHER TABLE IS EMPTY
IF ULTAB[] is initial.
   WRITE: / 'TABLE EMPTY'.
ENDIF.
Create Batch session
PERFORM CRE-BATCH-SESS.
LOOP TABLE TO CREATE SCREEN INPUT
SORT.
LOOP AT ULTAB.
REFRESH IPUTTAB.
PERFORM SCREEN1.
PERFORM SCREEN2.
PERFORM PRN_ULTAB.
PERFORM CLOSE-SESS.
ENDLOOP.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
END OF MAIN PROGRAM
FORM SCREEN1.
SCREEN #1: INITAL SCREEN FOR MAINTAINING SOURCE LIST
CLEAR IPUTTAB.
IPUTTAB-PROGRAM = 'SAPLMEOR'.
IPUTTAB-DYNPRO = '200'.
IPUTTAB-DYNBEGIN = 'X'.
APPEND IPUTTAB.
Source List : Material No.
CLEAR IPUTTAB.
IPUTTAB-FNAM = 'EORD-MATNR'.
IPUTTAB-FVAL = ULTAB-MATNR.
APPEND IPUTTAB.
Source List : Plants.
CLEAR IPUTTAB.
IPUTTAB-FNAM = 'EORD-WERKS'.
IPUTTAB-FVAL = ULTAB-WERKS.
APPEND IPUTTAB.
ENDFORM.
FORM        : SCREEN1                                               *
FORM SCREEN2.
Modify screen for SOURCE LIST
CLEAR IPUTTAB.
IPUTTAB-PROGRAM = 'SAPLMEOR'.
IPUTTAB-DYNPRO = '205'.
IPUTTAB-DYNBEGIN = 'X'.
APPEND IPUTTAB.
CLEAR IPUTTAB.
IPUTTAB-FNAM = 'EORD-VDATU(1)'.
IPUTTAB-FVAL = '01.01.2001'.
APPEND IPUTTAB.
CLEAR IPUTTAB.
IPUTTAB-FNAM = 'EORD-BDATU(1)'.
IPUTTAB-FVAL = '31.12.9999'.
APPEND IPUTTAB.
CLEAR IPUTTAB.
IPUTTAB-FNAM = 'EORD-LIFNR(1)'.
IPUTTAB-FVAL = P-LIFNR.
APPEND IPUTTAB.
CLEAR IPUTTAB.
IPUTTAB-FNAM = 'EORD-EKORG(1)'.
IPUTTAB-FVAL = 'ALL'.
APPEND IPUTTAB.
CLEAR IPUTTAB.
IPUTTAB-FNAM = 'EORD-NOTKZ(1)'.
IPUTTAB-FVAL = P-NOTKZ.
APPEND IPUTTAB.
CLEAR IPUTTAB.
IPUTTAB-FNAM = 'EORD-AUTET(1)'.
IPUTTAB-FVAL = '1'.
APPEND IPUTTAB.
Specify that we are now done with this screen (Save it with F11)
CLEAR IPUTTAB.
IPUTTAB-FNAM = 'BDC_OKCODE'.
IPUTTAB-FVAL = '/11'.
APPEND IPUTTAB.
ENDFORM.
FORM        : CLOSE-SESS                                            *
DESCRIPTION : CLOSE THE SESSION                                     *
FORM CLOSE-SESS.
closing the session.
IF P-RUN = 'X'.
Auto run the Batch Input Program
CALL TRANSACTION 'ME01'
          USING IPUTTAB
          MODE   'E'
          UPDATE 'S'
          MESSAGES INTO MESSTAB.
ELSE.
Maual run the Batch Input Program
CALL FUNCTION 'BDC_INSERT'
       EXPORTING
            TCODE     = 'ME01'
       TABLES
            DYNPROTAB = IPUTTAB.
ENDIF.
ENDFORM.
FORM        : PRN-ULTAB                                             *
DESCRIPTION : PRINT OK TABLE                                        *
FORM PRN_ULTAB.
WRITE: / ULTAB-MATNR, ULTAB-WERKS, ULTAB-ZEORD, ULTAB-LIFNR.
W-LINE-NO = W-LINE-NO + 1.
WRITE: '      RECORD# ', W-LINE-NO.
ENDFORM.
FORM        : CRE-BATCH-SESS                                        *
DESCRIPTION : CREATE BATCH SESSION                    *
FORM CRE-BATCH-SESS.
Create BTCI session **
CALL FUNCTION 'BDC_OPEN_GROUP'
     EXPORTING
          CLIENT = SY-MANDT
          GROUP = P-BTCHSN
          USER   = SY-UNAME
          KEEP   = 'X'.
ENDFORM.
Regards,
Marasa.

Creation of DataSource for FlatFile Interface in BI 7

Hi Y'all!
Can anyone please give me urgent assistance in creating/defining a DataSource for the FlatFile Scenario in BI 7.0. I've been trying to no avail. I certain I am doing this incorrectly, as such I seek your assistance. Can anyone please be so kind as to give me a step-by-step walkthrough of the specific individual steps (in sequence) in creating/defining DataSources... Also can this be accepted as a character (08-MAY-07)?
Much thanks!
Philips

Hi,
The following step can help you..
1. create a info source and assign the data source -
2. select data source as PC File ( give any name tech & desc)
3. create a info source structure by include all individual info objects / har. keyfig
    those are available in your file
4. you can always take the reference of the info objects from the cube/ODS as to
    make info source staructure easy
5. map the corresponding info objects in the trasfer structure
6. save and activate the info source
7. go to your info provider cube/ODS and right click - select - create update rules
    select the name of the file data source name as given above
8. map them as defult one-to-one mapping until other wise you have some require
    ment in data manipulation through update rules.
9. save and activate.
10. come to the info source - create a info package - select source as .CSV file
     and preview it before you actually load.
11. as far as date is concern in your falt file..select the entire column of the date
     then goto-format column-select 'customize' then put format as 000000 (six
     zeros ) for 0calmonth.
12. when you lookat the date at infoprovider it shows like 20070508 but
      when you execute in a query it displays its text as 08-May-2007
I hope it would help you to understand and get your purpose solve.
Thanks=points.
Cheers.

Require Standard DataSources for Purchase Orders

Hi,
Please provide me the standard datasources for purchase orders to get the data updated automatically in a BI System.
I have to display report containing the purchase orders details of each day.
Regards
Sunil Kumar

Hi,
Following link will give you complete details of purchase order deports and data sources.
http://help.sap.com/saphelp_nw70/helpdata/en/df/cfb839f6a7a307e10000000a11402f/frameset.htm
Regards,
Vishnu

Using a View as the DataSource for a Matrix

Does anyone know if it is possible to use a view as the datasource for a matrix? For example, I have created a view named 'VW1' with 4 columns (1 being ItemCode). Here is the code that tries to set this view as the datasource for a matrix:
tableName = "VW1";
dbDataSource = sboForm.DataSources.DBDataSources.Add(tableName);
// Add the bind columns
column = columns.Add(COL_VALUE_UID, SAPbouiCOM.BoFormItemTypes.it_EDIT);
column.DataBind.SetBound(true, tableName, "ItemCode");
This last line of this code hangs but if I put a try around it, the GetLastError does not return anything. Is it because views cannot be used as datasources or is there something else I am missing?

Hi David,
You can use a view as a matrix datasource if you use UserDataSources instead of DBDataSources.
UserDataSource DSSubJobID = form.DataSources.UserDataSources.Add("SubJobID", SAPbouiCOM.BoDataType.dt_LONG_NUMBER, 12);
Col = GridMain.Columns.Item(ColSubJobID);
Col.DataBind.SetBound(true, "", DSSubJobID.UID);
You then need to manually set the value of the UserDataSource e.g:
Reader = Command.ExecuteReader(CommandBehavior.SequentialAccess);
GridMain.Clear();
int RowNo = 1;
while (Reader.Read())
   DSSubJobID.Value = SubJobID.ToString();
   //set other user datasources here
   //add a row the matrix
   GridMain.AddRow(1, -1);
Regards, Lita

"Datasource" or "Tx Datasource" for Local Transactions

Similar Messages

Maybe you are looking for